Tender for instrument installation materials relating to rewinder dust extraction system of tissue machine#5 at tnpl unit ii

Sharing tender

instrument installation materials relating to rewinder dust extraction system of tissue machine#5 at tnpl unit ii , cable glands of double compression type, weather proof shall be ip65 of nickel plated brass with pvc shroud. field side with out lock nut(note: successful bidder shall check cable od before ordering the glands) , 1/2” et gland for signal 1p x 1.0 mm² armoured cable, control 1p x 1.0 mm² armoured cable control 2p x 1.0 mm² armoured cable power 3c x 1.5 mm² armoured cable power 3c x 2.5 mm² armoured cable , 1” et size for signal 8p x 1.0 mm² armoured cable signal 16p x 1.0 mm² armoured cable control 8p x 1.0 mm² armoured cable control 16p x 1.0 mm² armoured cable , n1 1/4” et , air line assembly & fittings: (ss316) , 1” ss 316 tube (ss316) , 1” elbow (ss316) with ferrule and nut (ss316) , 1” ball valve threaded (ss316) , 1” npt(m) x 1” tube connector (ss316) , 1” straight union with ferrule and nut (ss316) , 1” one side threaded nipple 100 mm (ss316) , 1” two side threaded nipple 100 mm (ss316) , 1/2” ball valve threaded (ss316) , 1/2” one side threaded nipple 100 mm (ss316) , 1/4” x 1/2” ss 316 reducer bush , 1/4” x 3/8” ss 316 reducer bush , 3/8” x 1/2” ss 316 reducer bush , 8mm x 8mm x 8mm tee connector npt(m) , 8mm x 8mm elbow npt(m) , 8mm x 8mm dummy npt(m) , instrument air tube and fittings with nuts and ferrules , 3/8 npt(m) x 10mm copper tube connector , 1/4 npt(m) x 10mm copper tube connector , 10mm x 10mm copper tube union , 3/8 npt(m) x 10mm copper tube elbow connector , 1/4 npt(m) x 10mm copper tube elbow connector , 10mm x 10mm x 10mm copper tube tee , 1/4 npt(m) x 8mm ss316 tube connector , 8mm x 8mm copper tube union , 1/4 npt(m) x 8mm copper tube elbow connector , 8mm x 8mm x 8mm copper tube tee with three nuts and three freuule , 1/4” x 1/2” copper reducer bush , 1/4” x 3/8” copper reducer bush , 3/8” x 1/2” copper reducer bush , impulse pipe & tubes , 12mm od seamless pline pipe – ss316 , 1/2 socket – ss316 , 90 deg elbow connector for 12mm od tube – ss316 , 1/2 npt(m)x12 mm tube connector – ss316 , 12mm x 12mm tube union - ss 316 , 1/2” (scrd) globe valve , equal tee 12mmx12mmx12mm – ss 316 , 1/2t/h nipple 4 long – ss316 , 1/2”npt plug – ss316 , 3” condensate pot with 4 nos. of 1/2” npt(f) socket - ss 316 , 1/2” syphon- ss316 , ½ “ ss needle valve , 12 mm check valve , miscellaneous , 10mm x 1 1/2 long bolt and nuts with washer for jb installation , 6mm x 3/4” long bolt with nut and washer for mag flow earthing at pipe , 2” od, ms pipe , 150 mm x150 mm x 6 mm ms plate , 12 mm/16mm anchor fastener , 2” size air distributor (manifold) of ss 304 – assembly , number of ways : 6 nipple : 3/8”npt(m) welded – 6 nos. ball valve : 3/8” - 6 nos. air manifold inlet : size 1” with 1” valve air manifold drain : size 1/2” with 1/2” valve , number of ways : 10 nipple : 3/8” npt(m) welded – 10 nos. ball valve : 3/8” - 10 nos. air manifold inlet : size 1” with 1” valve air manifold drain : size 1/2” with 1/2” valve , junction boxes of ss 304 & ip65 enclosure installation with support spare gland holes shall be covered with dummys. , analog junction box (big) size : 750mm(w) x 750 mm(h) x 300mm(d) gland plate : knockout - 16 nos, of 1/2” npt gland and knockout - 2 nos, of 1” npt gland 2.5 sqmm terminals : 100 nos fixed in suitable dinrail pvc duct with cap : required. jb material :ss 304, ip65 , analog junction box (small) size : 350mm(w) x 350 mm(h) x 250mm(d) gland plate : knockout - 10 nos, of 1/2” npt gland and knockout - 2 nos, of 1” npt gland 2.5 sqmm terminals : 30 nos fixed in suitable dinrail pvc duct with cap : required. jb material :ss 304, ip65 , digital junction box (big) size : 450mm(w) x 450 mm(h) x 250mm(d) gland plate : knockout for 16 nos, of 1/2” npt gland and knockout for 2 nos, of 1” npt gland 2.5 sqmm terminals : 50 nos fixed in suitable dinrail pvc duct with cap : required. jb material :ss 304, ip65 , power distribution boxes size : 350mm(w) x 450 mm(h) x 250mm(d) gland plate : knockout for 10 nos 1/2” npt gland knockout for 2 nos of 1” npt gland 2a double pole mcb (siemens) : 10 nos fixed in suitable dinrail 2.5 sqmm terminals : 30 nos fixed in suitable dinrail 4.0 sqmm terminals : 3 nos fixed in suitable dinrail pvc duct with cap : required. earthing bus bar : required. jb material :ss 304, ip65 , air line assembly & fittings: (ss304l) , 1 pipe, sch 40 (ss304) , 8mm od tube ss 316 , 12mm od ss 316 tube