Housing Urban and Rular Development Local Bodies Closing in 11 days TDR #57715433

Tender For Vellore District Construction Of New Pds Shop In Mohamadhupuram Village At Murukk Attu Panchayat Mlacds 2026-27 K.V.Kuppam Block Package No 02

Issued by Local Bodies · Vellore, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Oct 2026
11 days left
EMD
9800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Vellore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Vellore District Construction Of New Pds Shop In Mohamadhupuram Village At Murukk Attu Panchayat Mlacds 2026-27 K.V.Kuppam Block Package No 02

BOQ

Name of Work:- Vellore District Construction of new PDS shop in Mohamadhupuram village at Murukk attu panchayat MLACDS 2026-27 k.v.Kuppam Block Package No 02
Sl. No. Item Description
1Vellore District Construction of new PDS shop in Mohamadhupuram village at Murukkampattu panchayat MLACDS 2026-27 k.v.Kuppam Block Package No 02
2GYM Building
3Earth work excavation for foundation in all classes of soils and sub soil to full depth except in hard rock requiring blasting but inclusive of shoring strutting if required for the sides of foundation.
4Supplying and filling of conveyed earth with a lead of 1Km for basement filling including cost and conveyance of all materials to site including all labour charges for filling etc.complete complying to standard specification
5Cement Concrete 1:4:8 mix using 40 mm HBG metal for foundaion including watering wherever necessary and laid in layers of not more than 15cm thick. Compacting etc., complete complying with standard specifications and as directed.
6Brick work in CM 1:5 mix using country bricks ground moulded of size 23 x 11 x 7 Cm for the following including curing etc., complete complying with standard specifications.
7Supplying and Fabricating and placing in position MS Steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and blinding wire all floors etc., complete complying with standard specification.
8Supplying and Erection centering for sides and soffiots including necessaary supports and strutting as directed by the departmental officers. Rate for 10m2 for the following items (RCC floor slab, roff slab, Rectangular / Square, Tee/ Ell beams, Lintels,
9Below GL
10Above GL
11Rainforcement Cement Concrete 1:1.5:3 using 20 mm ISS HBG metal for all RCC item of works excluding cost of reinforcement and fabricating charges, centering and shuttering but icluding curing and providing fixtures like fan clamps in the RCC floor or roof
12Plastering with CM 1:3, 10mm thick over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.
13Plastering with CM 1:5, 12mm thick over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.
14Plastering with CM 1:4, 20mm thick over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.
15Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
16Distempering two coat using oil bound Distemper including cost of distemper and labour charges, etc, complete.
17Painting Two coat approved Emulsion paint over the plastered surface including cost and all other charges etc.,
18Painting Two coat of new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying
19Supply of steel doors and windows
20Door 1 0.90 m X 2.10 m
21Window 1.20 m x 1.30 m
22Provision for Electrical arrangements
23Light & Fan Point
245 Pin Plug Point
25LED Tube Light
26Bulk Head Fitting
27Celling Fan
28Supply and Installation of Gym equipments
29Leg Press: Supply ,Erection, and fixing of leg press of size 2030mm x 340mmx 1535mm,Area of 7.4 Sq ft, Material of pre galvanised Mild Steel of 3mm thick,Paint of all weather two coats of powder coated paint,Sealed ball bearing,Steel and Footrest/Food Paddle for long lasting life Etc,including cost and conveyance of all materials and labour charges etc.
30Air walker/Leg & Thigh Exerciser : Supply ,Erection, and fixing of Airwalker of size 1122mm x 510mmx 1489mm,Area of 5.3 Sq ft, Material of pre galvanised Mild Steel of 3mm thick,Paint of all weather two coats of powder coated paint,Sealed ball bearing,Steel and Footrest/Food Paddle for long lasting life Etc,including cost and conveyance of all materials and labour charges etc.
31Shoulder Builder: Shoulder builder equipped with 1. vertical post of dia inch, height 5 ft 2. Rotating/Spinning wheels (2 Nos) of dia 3 ft made of 1 inch pipe along with interior cross bars (2 nos) of 1 inch pipe with necessary provisions for handle to spin the wheel,Paint of all weather two coats using powder coated paint,including cost and conveyance of all materials and labour charges etc.
32Hip Twister: Hip Twister equipped with 1. Vertical square channel post of size 70mmx70mmx6mm 2. Horizontal post (top and bottom) using square channel of size 50mmx50mmx6mm 3. Pedal (2 Nos) of dia 1 ft 6 inch made of checkered plate of 6mm thick with minimum ground clearance of 0.5 ft, and also necessary bearing to spin and necessary provision such as 1 inch handle to provide support,Paint of all weather two coats using powder coated paint,including cost and conveyance of all materials and labour charges etc.
33Double spin: Double Spin equipped with 1. Vertical post of dia 3 inches, height 4 ft 3 inch 2. Steering wheel (4 Nos) of dia 1 ft made of 1 inch pipe along with interior short cross bars(3 nos) of 1 inch pipe with necessary provisions for handle to spin the wheel,Paint of all weather two coats of powder coated paint,including cost and conveyance of all materials and labour charges etc.
34Indoor Gym Equipments( including installation charges)
35Exercise cycle: Equipped with single window, LCD Display showing speed, Time, distance & Calories. Resistance Range with Cotton Belt capacity for user maximum Wt of 200 lbs. With onsite comprehensive annual maintenance for 3 years after expiry of guarantee/ warranty period. With onsite comprehensive annual maintenance for 3 years after expiry of guarantee/ warranty period.
36Muti Gym: Multi Function Gym single station Equipped with 1. Butterfly 2. Leg Extn 3. Upright bench press 4. Lat pull down with 1\\" dia CRC Steel Stoving painted 4ft. Length 5. Upright row 6. Side bends. After assembling, the size approximately L 135 x W 119 x H 196 cm varying permissible upto 10pct. with \\"D\\" shape metal steel tube heavy duty frame, enameled finish with 150 lbs plastic system PVC seat/back foam protector. All frames minimum of 14 gauge with 2 inch dia CRPC Steel, stoving painted. With 1 inch pipe of 14 gauge 25.4mm with onsite comprehensive annual maintenance for 3 years after expiry of guarantee/ Warranty period.With onsite comprehensive annual maintenance for 3 years after expiry of guarantee/ warranty period.
37Weight lifting rods with plates: Weight Lifting rods of various sizes of 4ft, 5ft & 6ft and weight lifting chromium coated steel plates of various weights of 2.50Kg.5.00Kg,7.50Kg, 10.00Kg,15.00Kg and 20.00Kg on both sides. With onsite comprehensive annual maintenance for 3 years after expiry of guarantee/ warranty period.
38Dumbbell with stand: Three tier dumbbell stand along with rods, plates and dumbbells made up with steel rubber coated 2, 3,5 & 10 kgs. With onsite comprehensive annual maintenance 3 years after expiry of guarantee/ warranty period.
396 Station Multi Gym: Multi Function Gym 6 station Equipped with 1. Butterfly 2. Leg Extn 3. Upright Multi bench press 4. Lat pull down with 1\\" dia CRC Steel Stoving painted 4ft. Length 5. Rear Deltoid 6. vertical knee raise. After assembling, the size approximately L 135 x W 119 x H 196 cm varying permissible upto 10pct. with \\"D\\" shape metal steel tube heavy duty frame, enameled finish with 150 lbs plastic system PVC seat/back foam protector. All frames minimum of 14 gauge with 2 inch dia CRPC Steel, stoving painted. With 1 inch pipe of 14 gauge 25.4mm with onsite comprehensive annual maintenance for 3 years after expiry of guarantee/ Warranty period.With onsite comprehensive annual maintenance for 3 years after expiry of guarantee/ warranty period.
40Twister (standing and sitting)
41Abdominal conditioner: All steel powder coated frame ,Rexin covered cushioned top.With onsite comprehensive annual maintenance for 3 years after expiry of guarantee/ warranty period.
42Butterfly: Single station Gym equipped with Selectorized weight plate.With onsite comprehensive annual maintenance for 3 years after expiry of guarantee/ warranty period.
43Towards Name Board Charges
44GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57715433
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 14-10-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Vellore District Construction Of New Pds Shop In Mohamadhupuram Village At Murukk Attu Panchayat Mlacds 2026-27 K.V.Kuppam Block Package No 02
Basic Detail
Tender No A2/2323/2026
Bidding Type Tender
Location
City Vellore
State Tamil Nadu
Key Dates
Publish Date 25 Sep 2026
Submission Date 14 Oct 2026
Open Date 14 Oct 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 9800
Exemption Not Available
Document List
56cba3e5-eb82-48d7-8027-39ce61da7607.html
BOQ_850922.xls
Tendernotice_1 (22).pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 25, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 14, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Oct 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

56cba3e5-eb82-48d7-8027-39ce61da7607.html

xls

BOQ_850922.xls

pdf

Tendernotice_1 (22).pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders