Tender For Maintenance And Repairs Works To The Oht At Appanaickenpalayam In Ward No 1 North Zone Roc No.3204/2026/Md2
Tender Value
14.60 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
15 days left
EMD
14600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance And Repairs Works To The Oht At Appanaickenpalayam In Ward No 1 North Zone Roc No.3204/2026/Md2
BOQ
| Sl. No. | Item Description |
| 1 | 1. Earth work excavation in all soils with initial lead & lift etc. complete as per direction of departmental officers etc. completed. |
| 2 | 2. Plain cement Concrete in 1:4:8 mix (one cement, four sand,eight metal) using 40mm size Hard Broken stone as per the direction of departmental officers etc., complete |
| 3 | 3. Dismantling the Old Damaged Wrought and put-up Framed Timbers in roofs / floors |
| 4 | 4. Supply and erecting centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC slabs, Rectangular beems, Tee (or) ECC Beam, Lintel, Bed Block, Staircase waist and landing slabs landing beams, canopy etc., in all floor with all cross bracings using mild steel sheets of size 90cm X 60cm and BG 10 stiffened with welded mild steel angles of size 25mm X 25 X 3mm for boarding laid over country wood joinsts of size 10cm X 6.50 cm spaced at about 90cm C/C and supports by Causrina props of 10cm to 13cm dia spaced at 75cm C/C etc., completed as directed. Sl.No.123 |
| 5 | 5. Supply and fabrication of RTS rods in various dia including cutting, bending, tying with borbad wire and all labour charges |
| 6 | 6. Reinforced Cement concrete 1:1.5 :3 (one cement, one and half M Sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmentalofficer etc., complete |
| 7 | 7. Filling With M sand Mortar at site etc. |
| 8 | 8. Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut thepieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
| 9 | 9. Scrapping the Old Plastered Surface |
| 10 | 10. Plastering with Cement mortor 1:3 to 20mm thick inclding all cost etc complete |
| 11 | 11.Providing Double Scaffolding using casirino pole of 13.5cm facing between 60cm between the poles tieing with caeir etc., as per instruction of departmental officer |
| 12 | 12. Providing Scaffolding at a height of 11m to repair the tank, beam and columns etc., complete |
| 13 | 13. Supply of Epoxy Ponding Agent Chemical etc., complete |
| 14 | 14. Labour for Applying Chemical etc., complete |
| 15 | 15. Supply of Micro Concrete etc., complete |
| 16 | 16. Apply of Acrolic polimer coating with bosco latrtic 2 coats after cleaning the existing surface etc., complete |
| 17 | 17. Providing and injection pressure serounting under 40PSI with cement slussy mixed with non stringing compound CEBEX 100 points |
| 18 | 18. Painting two coats with approved cement paint over cement plastered surface ceilingand other new surface including cleaning prepering the surface and curing etc., complete - 1 m2 |
| 19 | 19. Painting with first quality enamel paint two coats over a Base including thorough cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed. |
| 20 | 20. Providing wiring with Light Points SD 21 |
| 21 | 21. Providing wiring with 5Amps plug point |
| 22 | 22.Supply and Fiiling with Well gravel including cost and conveyance of alll materials and all labour charges |
| 23 | 23.Painting with first quality emulsion paint two coats over a priming coat including through cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed. |
| 24 | 24. Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour SD. 55 |
| 25 | 25.Supply and fixing of 20W 4 Feet LED fitting with LED |
| 26 | 26.Supply and fixing of mild steel door using all round \\"L\\" angle 25 X 25 X 6mm thick, cross bracing 20 X 6mm M.S.Flat with necessary locking arrangements including cost and conveyance etc., Size : 0.60 X 1.85 = 1.11 m2 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender