Tender For Proposed Construction Of A Multi-Purpose Sports Ground With Allied Facilities At Mayor Krishna Murthy Nagar Ffc Ground In Div-45, Unit-11, Zone-04
Tender Value
41.98 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
5 days left
EMD
42000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Construction Of A Multi-Purpose Sports Ground With Allied Facilities At Mayor Krishna Murthy Nagar Ffc Ground In Div-45, Unit-11, Zone-04
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation by Mechanica...2.40m Footing Depth. (including Refilling charges) |
| 2 | Plain Cement Concrete 1:2:4 (one cement, two crush...departmental officers.-Mixing by mechanical means |
| 3 | Brick work in following Cement Mortar using best q...Executive Engineer in charge. In Cement Morter 1:3 |
| 4 | Plastering the surface of walls with Cement Mortar...d as directed by the departmental officers. (Wall) |
| 5 | Painting New Plastered Wall Surface with Two finis...ed by the Executive Engineer before use on works.) |
| 6 | supplying of PVC pipes 160mm dia with ISI monogram (working pressure 6kg/cm2) |
| 7 | Providing and Laying Granular sub base (GSB) by pr....complete as per clause of 401 Morth Specification |
| 8 | Providing and laying, spreading and compacting gra... Is Applicable Only If Work Is Done During Night) |
| 9 | Providing Quarry Rubbish From Approved Quarry Incl...For Spreading. Watering Compacting Etc. Complete. |
| 10 | Refilling with excavated soil (other than sand) co...cification for filling in foundation and basement. |
| 11 | Supplying and filling in foundation, basement, etc...tion and as directed by the departmental officers. |
| 12 | Cement Concrete 1:3:6 (One Cement, Three crushed s...artmental officers. - Mixing by mechanical means |
| 13 | Supplying and erecting steel centering including n...l be given after the concrete is laid). FOUNDATION |
| 14 | Supplying and erecting steel centering including n...be given after the concrete is laid) VERTICAL SLAB |
| 15 | Providing and laying in position, Standardised Con...the Department for the excess usage of materials). |
| 16 | Supplying, fabricating and placing in position Rib...t and binding wire) Above plinth / Basement level |
| 17 | Brick work in following Cement Mortar using best q...Executive Engineer in charge. In Cement Morter 1:5 |
| 18 | White washing two coats with freshly burnt white s...lying with standard specification and as directed. |
| 19 | Painting the wall two coats with approved weather ...tion and as directed by the departmental officers. |
| 20 | Paving the floor with best approved quality fine p...e Executive Engineer concerned before use on work) |
| 21 | Manufacturing, Supplying and Fixing of Stainless S...welding charges, electrical charges, etc. complete |
| 22 | Cost of Erection & Materials Required For 7 mtr St... Conventional Foundation(Material Ratio - 1:1.5:3) |
| 23 | Cost of supply of 120W LED Street Light Fitting |
| 24 | Supplying and erecting in positing LIGHT DUTY STEEL TRUSSES as per the drawing. The materials and design of the trusses should confirm (BD-796A) |
| 25 | Supplying and providing chain link fence with RCC post . The RCC posts will be of 2.5m c/c and of 2.75m hight. The post will be 100mm square(BD-638A) |
| 26 | Provision of supplying and fixing of Volley Ball net with pole and all finshing as per standard specification and condition,etc. as directed by Engineer in-charge.(NSOR) |
| 27 | SupplyandFixingofTensilestructure,ThestructureshallbedesignedinaccordancewithI.S800withthedesignedwindspeedasdefinedbyIS:875basedonlocationsiteconditionsandloadcombinationsasdefinedIS:875,Themembraneshouldbeminimum702GSMFerrariFabricTheabovementionedfabricwillbepatentedandweldedwiththehighweldingmachinefor30mmwideandattheendpocketswillbemadetoslidethekedarprofileandwillbefixedusingspecialaluminiumextrusionsattheendoftherooftruss.Thefabricjoints,cablesaddles,masttopsandbases,andtensioningmechanismsandallrelativenecessaryhardwareandlabourandtransportThecompletestructurewillbedesignedforwindloadandliveload.Thisalsoincludestwocoatepoxyprimerandpaint.TheShopdrawingsincludingframestructureofstainlesssteelstructureandfabricwithallthenecessitystructuraldesigntobesubmitbeforeinstallation.Theworkincludes3NoofStoneBenchesandareadevelopmentasperdrawingandinstructionfrom Engineer |
| 28 | Refillingwithbroughtfromoutsideearthotherthansandwithaninitialheadloadof100mts.anddepositingtheearthasshownbythedepartmentalofficersinlayersofnotmorethan15cmthickwellrammed,wateredandconsolidatedetc.,complete complying with standard specification Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender