Tender For Providing Decorative Light On Round About India Expo Mart Greater Noida.
Tender Value
1.38 Crore
Estimated cost
Bid Submission
05 Oct 2026
6 days left
EMD
2.77 Lakhs
Bank guarantee accepted
Document Fee
2570
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Decorative Light On Round About India Expo Mart Greater Noida.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and Installation of Bridge decorative Pole for street lighting on the roads. The decorative pole shall be made of MS pipe of total height 9 Meter.Pole having cast iron base with 140 mm Dia X 4mm Thickness X 3000 mm long the middle section shall be of 114 mm dia X 3.6 mm thickness X 3000 mm long and top section shall be 90 mm dia X 3.6 mm thickness X 3000 mm long the base plate shall be of dimension 300 mm X 300 mm and thickness 16 mm and joined with the pole by welding joint with the help of stiffiners a built in service window shall be suitable heatsink for 1x150 watt light for single arm (1 to 1.5 mtr. long and 1 mtr. width) should be duly coated with 2 coats of epoxy zn primer and 2 coats of poly urethane paint of desired colour and colour should be final as per EIC. Provision for inside termination box with 4way connector & 1nos 6 AMP SMCB for local isolation. Pole light is complete in all aspects with all accessories with foundation bolts as per E/I. |
| 2 | L/Charges for by cutting existing surface for making of suitable pit of size 400x400x1000mm construction RCC foundation grade For grouting the pole with 4no. Of rag bolts and fitting with RCC mix of 1:2:4 (cement : coarse sand : grit ) M-25 grade for proper grouting of pole along with suitable size 12 mm steel cage grouted I the ground inclusive of all material labour, T. & P etc water curing upto 7 days for completion of work as per direction of E/I at site. Pre Approved |
| 3 | S/F of M.S. Rod for earthing with 2.5 m long solid 20mm dia hot dipped galonished M.S. Rod burried till the top reaches 1.7 mtr. Below the GL Complete with bolts & nuts and G.I. earth wire 7/14 complete in all respect. GNIDA-SOR-2024, S. No.-41 |
| 4 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. . (DSR-2025-5.2) |
| 5 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.(3X2.5 Sqmm)DSR-2025 S.No.1.17.12 |
| 6 | Supply & laying of Aluminium conductor XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks onsides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (UPPWD-2018-501) |
| 7 | 3.5CX25 Sqmm |
| 8 | 3.5C X 50 Sqmm |
| 9 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. (UPPWD-2018-504) |
| 10 | 16 Sqmm |
| 11 | 25 Sqmm |
| 12 | 50 Sqmm |
| 13 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.. (DSR-2025-5.15) |
| 14 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. UPPWD-2018/807 |
| 15 | 25 AMP TPN |
| 16 | S/L of 90mm dia. DWC pipe for drawing of power cable across the road by drilling of 120mm dia. at 1mtr. below the road level thereby doing the work of providing DWC pipe by Trenchless method. GNIDA SOR-2024 (S.No-15)-132298 |
| 17 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.(DSR-2018/15.16.2) |
| 18 | 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 19 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer Incharge (UPPWD-2018-503) |
| 20 | 3.5CX25 Sqmm |
| 21 | 3.5CX50 Sqmm |
| 22 | S&F of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve Cat B DSR-2025 (S.No-2.10.3) |
| 23 | Labour Cess and GST will be paid extra as per govt. orders Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender