Tender For Estimate For Shaded Cycle Track & Footpath Pavement At Left Parallel Road .(Ekamra Kanan To Hatiasuni)
Tender Value
7.85 Crore
Estimated cost
Bid Submission
09 Oct 2026
4 days left
EMD
7.85 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Shaded Cycle Track & Footpath Pavement At Left Parallel Road .(Ekamra Kanan To Hatiasuni)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work Excavation in all kind of soil including levelling the bed etc.,complete with intial lift & removing the excavated earth away from the work site by mechnical means etc.,complete. |
| 2 | Filling F&P with sand well watered and rammed with all cost convayance and royality etc.,complete |
| 3 | P.C.C 1:3:6 Grade in foundation bed using 40mm to 20mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section - 1700 & 2100 of MoSRT&H Specifications for Road & Bridge works (Latest Revision). |
| 4 | R.C.C. work of M25 grade with 20 mm down graded chips (C.B.) including hoisting & laying including centering & shuttering but excluding the cost of M.S. rod. |
| 5 | Labour charges for cutting, bending, binding and tying the grill including the cost of M.S. rod. |
| 6 | Supplying, providing and fixing chequered tiles 25 MM on prepared surface with 16 mm thick cement mortar 1:3 jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete |
| 7 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 60mmm thick C.C. Paver Blocks of M-35 grade With approved colour design Pattern(Post G. S.T)Without Cost of Paver Block. |
| 8 | Supplying and fixing of Pre cast Curve Stone 600mm x300mmx 150mm of M 30 grade of approved make, design,colour and size made by Block making mechine with proper comption fixed in required atten etc., comlete in all respect confforming to IS 5758:1984 |
| 9 | Brick work with Fly ash. bricks 25cm x 12cm x 8cm having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:4) in foundation. |
| 10 | 12mm thick cement plaster (1:6) on brick work. |
| 11 | Providing and fixing precast RCC Planter Box of size 1.00 m × 0.60 m × 0.45 m manufactured with M30 grade reinforced cement concrete using Fe-500 TMT reinforcement, wall thickness 75 mm, with smooth fair-faced finish, minimum 2 Nos. 50 mm dia drainage holes at bottom, lifting hooks, complete with reinforcement, shuttering, casting, vibration, curing, loading, unloading, transportation to site, placing in position and fixing complete as per approved drawings and direction of the Engineer-in-Charge. Rate includes all materials, labour, machinery, T&P, carriage, overheads, contractor's profit and all incidental charges complete. |
| 12 | Providing and fixing precast RCC Planter Box of size 1.0m × 0.60 m × 0.9m m manufactured with M30 grade reinforced cement concrete using Fe-500 TMT reinforcement, wall thickness 25 mm, with smooth fair-faced finish, minimum 2 Nos. 50 mm dia drainage holes at bottom, lifting hooks, complete with reinforcement, shuttering, casting, vibration, curing, loading, unloading, transportation to site, placing in position and fixing complete as per approved drawings with painting with weather coat as per approved colour by EICand direction of the Engineer-in-Charge. Rate includes all materials, labour, machinery, T&P, carriage, overheads, contractor's profit and all incidental charges complete. |
| 13 | Providing, casting, transporting and fixing precast RCC seater (bench) of Size 3.00 x 0.45 x 0.05m, manufactured with M30 grade reinforced cement concrete using Fe-500 TMT reinforcement, comprising seat slab and supporting Vertical legs of 0.45m x0.45 x.05m 5 nos /as required as per approved drawings with painting with weather coat as per approved colour by EIC |
| 14 | Supply and fixing of 2.00 mm thick G I sheet with CNC profile cutting as per the approved concept design, including surface preparation, application of primer, and two coats of paint finishing, complete with all materials, labour, tools & plants, and incidental charges, finished in all respects as directed by the Engineer-in-Charge. |
| 15 | Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete. |
| 16 | Supplying, fitting, fixing, with fabricating, erecting tensile fabric roofing, including wires, cables, chemical fasteners, shackles, rigging screws, clamps, tensioning hardware, and also including fabricating, assembling, hoisting, erecting and placing position MS built-up section, tubular structure, MS round square or rectangular hollow tubes ( Make-TATA/JINDAL/APPALO), etc., trusses, etc., with welding the structure should withstand to wind speed of 200km/h APPROVED DESIGN including one coat primer with 2 coat painting with Berger/Asian paint and bolted with special shaped washer and supplying, fitting, fixing, with fabricating, erecting tensile fabric roofing, including wires, cables, chemical fasteners, shackles, rigging screws, clamps, tensioning hardware, etc., of approved brand and make, and including cost, conveyance, and taxes of all materials, etc., for the work complete, as per direction of the Engineer-in-charge. The tensile fabric should have specification under Serge Ferrari France or equivalent with both side JPVDF coat, technical properties, 5% variation acceptable, YRE 1100 dia PES HT CR treatment, weight 950 grams per square meter, width 267 cm to 105 inch, or 105 inch, tensile strength 3000 by 2800 N by square meter, double RAPWEFT, tear resistance 300 N warp WEFT, adhesion 120 N by SCM surface treatment, weld able fluorine varnish, light transmission 150% flame rate, flame retardance M2 by MFP 92-507SCSFMT-119, P1D1M-4-102 including cost, conveyance, royalty, etc., including taxes of all material, cost of labor, T&P, etc. as required for the work complete, as per direction of the Engineer-in-charge. |
| 17 | Supply & fixing of 40Watt decorative post top fitting. |
| 18 | Supply and Fixing of decorative 3Mtr light post top pole with 1 no 10Amp DP MCB. |
| 19 | Providing and laying C.C (M-30) using 20mm size down graded crusher broken hard granite chips including the cost of centring and shuttering with cost of all labour, materials.T & P and taxes, royality etc complete in all respect as per the direction of Engineer-in-charge. |
| 20 | Supply and fixing of Coil earthing. |
| 21 | Recessed/surface wiring to light point with 1.5 Square mm FR PVC insulated single core multistranded copper conductor of ISI marked with 20mm dia. non-metallic PVC flexible conduit with 5 Amp, 25 on MS box having front bakelite cover of suitable size, MS box with 1.5 Sq.mm FR PVC insulated single core multistranded copper conductor as earth wire including all accessories and connection as per direction of Engineer-in-charge. |
| 22 | Supply and fixing of 3 Watt LED Ground Bourial. |
| 23 | Supply and fixing of 10W LED outdoor type decorative surface mounted ceiling fitting. |
| 24 | Supply and fixing of 12Way TPN DB. |
| 25 | Supply and laying of 2 X 6mm2 Al.Ar. UG Cable. |
| 26 | Supply and laying of 4 X 16mm2 Al.Ar. UG Cable. |
| 27 | Supply and Laying of 40mm dia HDPE pipe for laying of cable inside the pipe. |
| 28 | Construction of suitable cable trench. |
| 29 | S/F of 63 Amp Outdoor type double door plinth mounted panel board made out of 2mm thick CR sheet duly acid treated for de-rusting, primered and powder coated with approved enamel paint having hinged door with provision for cable entry duly factory wired and locking arrangement etc. complete with following provisions.Incoming:-1. 63Amp 25KA 4P MCCB-1 NoOutgoing:-1.40Amp TPN MCCB-01 No. 2.32Amp DP MCB-2 Nos.3.200Amp copper bus bar.4. 0-100Amp Ammeter with selector switch-1Set 5. 0-500Volt Voltmeter with selector-1Set6. Indicator lamp-1Set. 7.Time switch with contactor complete set Size of panel board 36\\"x 24\\"x10\\" |
| 30 | Supply and fixing of standard earthing to the panel. |
| 31 | SITC of complete Solar PV walkway canopy system including PV modules, Inverter, electrical BOS, costom SDG support structure. |
| 32 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 15 cm,refilling the excavated earth after breaking clods and mixing with Farm yard manure in the ratio of 9:1(9 parts of staked volume of earth after reduction by20%:one part of stacked volume of FYM after reduction by 8%),flooding with water,filling with earth necessary,watering and finally fine dressing,levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed,within alead of 50 m,lift upto 1.5 m complete(cost of manure,earth to be paid separately) |
| 33 | Supplying and staking of Farm yard Manure(cowdung based) from approved source carriage upto 5 km lead complete(Manure measured in stacks will be reduced by 8% for payment),trench to be filled with soil&FYM in 1:9,reqt of FYM |
| 34 | Screened the FYM through sieve of I.S. designation 20 mm |
| 35 | Supplying and staking of garden soil/good earth at site including royality and carriage upto 10 km lead complete(earth measured in stacks will be reduced by 20% for payment),cost for1cum |
| 36 | Mixing earth and FYM in the required proportion specified or directed by Horticulture officer incharge |
| 37 | Spreading of Sieved FYM & soil in required thickness as per direction of Horticulture officer-in-charge(cost of FYM,good earth to be paid separately |
| 38 | Galphimia nitida of ht 20-25 cm, healthy, well developed in poly bag |
| 39 | Lantana sp. of different colour, well developed with fresh & healthy foloage with bloom in 20cm Earthen Pot/ Plastic Pot |
| 40 | Jatropha multifida (red colour) of height 45-60 cm. with 2-3 branches in earthen pot of size 20 cm |
| 41 | Clerodendrum splendens of height 30 cm to 45 cm. in 20 cm size of Earthen pot/Plastic pot |
| 42 | Nerium oleander variegated of height 60-75 cm., multibranched in earthen pot of size 25 cm |
| 43 | Pedilanthus variegated having 30 cm and above ht., well developed multisuckers with fresh & healthy foliage in 25 cm Earthen Pot/Plastic Pot. |
| 44 | Tabernaemontana coronaria (Chandni single) of height 90-105 cm.,bushy in big size HDPE bag |
| 45 | Plantation of Ornamental hedges at site including watering,removal of unservicable materials as per direction of HO incharge(excluding cost of plants&water) |
| 46 | Providing and watering of irrigation water through water tanker of Horticulture features i.e tree, shrubs, hedge/edge, ground cover etc. at the site of work. Water tanker having 5000 lit capacity with one labour for watering i/c cost of water, filling of tanker, watering at site with all leads and lifts as per direction of officer-in-charge. |
| 47 | Fertilizer & pesticide & Tools (Urea) |
| 48 | MOP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender