Tender For Renovation Of Existing Washrooms At Arts Block-1 Sanskrit Department, Ground Floor In Panjab University C Us, Sector-14, Chandigarh.
Tender Value
5.65 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
6 days left
EMD
11500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Existing Washrooms At Arts Block-1 Sanskrit Department, Ground Floor In Panjab University C Us, Sector-14, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Civil/Public Health Works |
| 2 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 5km for all lifts, complete as per directions of Engineer-in-charge. (Ref:- 1.1.18) |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 4 | All kinds of soil (Ref:- 2.8.1) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 6 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) (Ref:- 4.1.3) |
| 7 | 12 mm cement plaster of mix : |
| 8 | 1:6 (1 cement: 6 fine sand) (Ref:- 13.1.2) |
| 9 | Distempering with oil bound washable distemper of approved brand and manufacture to given an even shade |
| 10 | New work (two or more coats) over and including water thinnable priming coat with cement primer. (Ref:- 13.41.1) |
| 11 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 12 | 1:4:8 or leaner mix (Ref:- 15.2.2) |
| 13 | Dismantling stone slab flooring laid in cement mortar including stacking of servicable material and disposal of unserviceable material with in 50 metre lead. (Ref:- 15.25) |
| 14 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 15 | 15 mm to 40 mm nominal bore (Ref:- 15.44.1) |
| 16 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres (Ref:- 15.56) |
| 17 | Providing And Fixing white vitreous chinaware pedestal type water closet (European type W.C.pan ) with seat and lid, 10 litre low level white P.V.C flushing cistren with manually controlled device ( handle lever), conforming to IS: 7231, with all fittings and fixtures complete including cuting and making good the walls and floors wherever required: |
| 18 | W.C. pan with ISI marked white solid plastic seat and lid (Ref:- 17.2.1) |
| 19 | Providing and fixing white vitreous china flat black half stall urnial of size 580 x380x350mm with white PVC automatic flushing cistren, with fitting standrad size C.P. brass flush pipe , spreaderes with unions and clamps (all in C.P. brass) with waste fitting as per Is :2556, C.I trap with outlet grating and other couping in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever requried: |
| 20 | Single half stall urinal with 5 litre P.V.C automatic cistern (Ref:- 17.5.1) |
| 21 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :(Ref:- 17.7) |
| 22 | White vitreous china wash basin size 550x400 mm with a pair of 15mm C.P. brass pillar taps (Ref:- 17.7.3) |
| 23 | Providing and fixing toilet paper holder:CP Brass (Ref:- 17.34.1) |
| 24 | Providing and fixing soil, waste and vent pipes : |
| 25 | 100 mm dia. |
| 26 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989 (Ref:- 17.35.1.2) |
| 27 | 75 mm diameter : |
| 28 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989 (Ref:- 17.35.2.2) |
| 29 | Providing and fixing collar: |
| 30 | 100 mm |
| 31 | Sand cast iron S&S as per IS - 3989 (Ref:- 17.57.1.2) |
| 32 | 75 mm |
| 33 | Sand cast iron S&S as per IS - 3989 (Ref:- 17.57.2.2) |
| 34 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: |
| 35 | 100 mm dia (Ref:- 17.58.1) |
| 36 | 75 mm dia (Ref:- 17.58.2) |
| 37 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 38 | 100 mm inlet and 75 mm outlet |
| 39 | Sand Cast Iron S&S as per IS: 3989 (Ref:- 17.60.2.1) |
| 40 | Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: |
| 41 | 15 mm dia nominal bore (Ref:- 18.11.1) |
| 42 | 20 mm dia nominal bore (Ref:- 18.11.2) |
| 43 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc.complete: |
| 44 | 25 to 40 mm Nominal bore (Ref:- 18.13.1) |
| 45 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) (ISI marked). |
| 46 | 20 mm nominal bore (Ref:- 18.17.1A) |
| 47 | Providing and fixing uplasticised P.V.C. connection pipe with Brass C.P. Nuts collar and bush. |
| 48 | 15mm dia 450 mm long (Ref:- 18.21.2.1) |
| 49 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 50 | 15 mm nominal bore. (Ref:- 18.47.1) |
| 51 | 20 mm nominal bore. (Ref:- 18.47.2) |
| 52 | Providing and fixing C.P. brass stop cock (concealed) with caps including SS flange. Complete in all respect to the entire satisfaction of the engineer in-charge. |
| 53 | 15 mm nominal bore (Ref:- 18.52.1) |
| 54 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 55 | With F.P.S. bricks (Ref:- 18.76.1) |
| 56 | Providing and fixing 1st quality ceramic glazed wall tiles (300x600mm) conforming to IS: 15622 of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Ref:- N.S.) |
| 57 | Providing and laying Anti skid floor tiles of size 300x300mm of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. (Ref:- N.S.) |
| 58 | Providing and fixing 5mm thick mirror to be fixed with 4mm thk. hard board & all round to be finished with PVC designer 2\\"x1 1/2\\" moulding. Complete in all respects as per entire satisfaction of the Engineer-in-Charge. (Ref:- N.S.) |
| 59 | Providing and fixing in position 15mm i/d C.P. Brass short body(460 gms weight) with S.S. flange bib cock, complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref:- N.S.)(Ref:- N.S.) |
| 60 | 15 mm nominal bore(Ref:- N.S.) |
| 61 | Providing and fixing 15mm C.P. brass Angle cock and SS flange of approved quality. complete in all respect to the entire satisfaction of the engineer-in-charge. : |
| 62 | 15 mm nominal bore(Ref:- N.S.) |
| 63 | Providing and fixing C.P. towel Ring complete with PVC rawl plug and CP Brass screws with concealed fittings of approved quality and colour.Complete in all respect to the entire satisfaction of the engineer-in-charge(Ref:- N.S.) |
| 64 | Providing & fixing Liquid Soap dispenser with metallic bottle. Complete in all respects as per entire satisfaction of the Engineer-in-Charge.(Ref:- N.S.) |
| 65 | Providing and fixing Jet connection alongwith 450mm long pipe for water closet. Complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref:- N.S.) |
| 66 | Providing and fixing C.P. Brass Bottle Trap for Wash basin and sink.Bottle trap 32 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal(or as per manufacturer specification)(Ref:- N.S.) |
| 67 | Removal of Chinaware water closet with fittings. Complete in all respects to the entire satsfaction of the engineer- in charge(Ref:- N.S.) |
| 68 | Removal of Chinaware Wash basin with fittings.Complete in all respects to the entire satsfaction of the engineer- in charge(Ref:- N.S.) |
| 69 | Removal of Urinal with fittings .Complete in all respects to the entire satsfaction of the engineer- in charge(Ref:- N.S.) |
| 70 | Providing and fixing 32mm dia G.I. waste pipe along with elbow or bend. complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref:- N.S.) |
| 71 | Providing and fixing in position 15mm dia CP Brass nipple(1\\" to 2\\" long) to various fittings. Complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:- N.S.) |
| 72 | Providing and fixing Single socketed on wall face unplasticised Rigid UPVC pipe (6 kg per Sqcm pressure) of required size conforming to IS : 13592 Type A, including jointing with necessary Tee and Bend conforming to IS : 5382, leaving 10 mm gap for thermal expansion. complete as per entire satisfaction of the Engineer-in-Charge. |
| 73 | 100mm dia(Ref:- N.S.) |
| 74 | Providing & laying P.C.C. 1:8:16 (1 Cement : 8 coarse sand: 16 coarse aggregate)with stone ballast 32mm guage in foundation and plinth. Complete in all respect to the entire satisfaction of the Engineer-in-charge.(Ref:- N.S.) |
| 75 | Providing & Laying Half Brick masonry work with F.P.S. bricks of class designation 100 in superstructure above plinth level upto floor V level. complete in all respect to the satisfaction of the engineer in charge. |
| 76 | Cement Mortar 1:4 (1cement :4 coarse sand)(Ref:- N.S.) |
| 77 | Providing and laying Brick work with F.P.S. bricks of class designation 100 (average compressive strength not less than 105 kg per sq.cm.) in Foundation and plinth in : |
| 78 | Cement mortar 1:6(1 cement : 6 coarse sand) (Ref:- N.S.) |
| 79 | Providing and fixing PD-door system, model type PD door nylon size 750mm(W)x1830mm(H), overall height of cubical 1980mm ( including bottom gap of 150mm). Thickness of compact laminate: 12mm with complete accessories. Complete in all respect to the entire satisfaction of the engineer in charge.(Ref:- N.S.) |
| 80 | Providing and fixing C.P. Stainless steel fitting heavy duty ISI marked. |
| 81 | Tower bolt 8\\" long(Ref:- N.S.) |
| 82 | Providing and fixing C.P. Stainless steel fitting heavy duty ISI marked. |
| 83 | Tower bolt 6\\" long(Ref:- N.S.) |
| 84 | Providing and fixing C.P. Stainless steel fitting heavy duty ISI marked. |
| 85 | Handle 5\\" D-type(Ref:- N.S.) |
| 86 | Providing and fixing C.P.Stainless steel fitting heavy duty ISI marked. |
| 87 | Hinges 5\\"(Ref:- N.S.) |
| 88 | Providing and fixing Hydraulic door closer with logo printed along with necessary fittings. Complete in all respect to the entire satisfaction of the engineer in charge.(Ref:- N.S.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender