Tender For Balance Work By Way Of Sanitary / Disposal & Electrification Work For Hi-Tech Infrastructure For Multiplication, Pre And Post-Harvest Management Of The Walnut Germplasm Under Odop (One District One Product) (Nabard) At Walnut Research Stat
Tender Value
1.20 Crore
Estimated cost
Bid Submission
10 Oct 2026
14 days left
EMD
2.40 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Balance Work By Way Of Sanitary / Disposal & Electrification Work For Hi-Tech Infrastructure For Multiplication, Pre And Post-Harvest Management Of The Walnut Germplasm Under Odop (One District One Product) (Nabard) At Walnut Research Station Kulangam Kupwara, Skuast-K.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width)within a lead of 50 metres: All kinds of soil |
| 2 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length First class kail wood |
| 3 | Providing and fixing panelled or panelled and glazed shutters windows and clerestory windows fixing with butt hinges of required size with necessary screws, all complete as per direction of Engineer-in-charge. First class kail wood 35mm thick |
| 4 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction ofEngineer-in-chargesecond class kail wood |
| 5 | Providing and laying stone soling tightly hand packed under foundations and in mass concrete wall, Stones to be manually collected at site including carriages, head load etc complete in all respects |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) with 40% boulders 0f size 50 to 60mm, same to be deducted and paid seperately |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters ,buttresses, plinth and string course fillets, kerbs and steps etc. |
| 10 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2mm thick inclusive of Cement primer |
| 11 | Applying priming coats with primer of approved brand andmanufacture,havingWith ready mixed pink or grey primer on wood work (hard andsoft wood) having VOC content lessthan 50 grams/ liter |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 13 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour two coats |
| 14 | P/F of PVC 110mm pipes B type Surya Prakash make inclusive of all necessary fittings like Collar, Bend Clifs , Air trap, Plain Bends, Reducers, Door Bends etc complete in all respects. |
| 15 | P/F of PVC 90mm pipes B type Surya Prakash make inclusive of all necessary fittings like Collar, Bend Clifs , Air trap, Plain Bends, Reducers, Door Bends etc complete in all respects |
| 16 | Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados /walls over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(400mm x400mm ) |
| 17 | P /F C. P BRASS FIXTUREES / FITTINGS HINDWARE/ JAQUAR/CERA made with comlete job |
| 18 | BIB - COCK |
| 19 | P.V.C WASTE PIPE |
| 20 | WALL MIXER |
| 21 | BASIN MIXER |
| 22 | ANGLE VALUE |
| 23 | GYSER 50 LITRE |
| 24 | steel grating |
| 25 | soaP case |
| 26 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.W.C. pan with ISI marked white solid plastic seat and lid. |
| 27 | CP CONNECTION |
| 28 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. |
| 29 | bib.cock 2 in 1 |
| 30 | cp towel rod 600mm long |
| 31 | Cp nipples 15mm dia 100 mm long |
| 32 | Cp nipples 15mm dia 200 mm long |
| 33 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board510x1040mm bowl depth 225mm |
| 34 | Providing and fixing toilet paper holderC.P. brass |
| 35 | Health faucet SS Chain 1 meter long |
| 36 | Providing and fixing of white vitereous china wash basin 550x400 mm with pedestal complete with c.i/m.s brackets 32mm c.p waiste with couplings etc. and flexibel pipe of required length and size (cera/ hinderware/jaquar) or equivalent complete in all respects. |
| 37 | Providing and fixing 1500x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 38 | Providing and fixing PVC floor traps 90mm multi junctions including rubber washers etc and all other fittings required |
| 39 | Providing and fixing of white vitereous china table to washbasin over counter basinoval/rectangular/circular design with curved edge centre Pre-Punched ta hole chromium Plate cap for overflow including waiste coupling and all accessoriesand making all connections in all Respects |
| 40 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 41 | Providingandfixing3layerPPR(PolypropyleneRandomcopolymer)pipesconforming to IS:15801,UVstabilizedandanti-microbial fusion welded,having thermal stabilityforhot and cold watersupply including all PPR plainand brass threaded Polypropylene random fittings. This includestestingof joints completeInternal work-concealed on wall with clamps at 1.00meter including cutting chasing and making good the wall |
| 42 | PN-16 pipe , 25mm OD |
| 43 | PN 16 PIPE 32 MM OD |
| 44 | PN 16 PIPE 40 MM OD |
| 45 | 32MM BALL VALUE |
| 46 | 25 MM BALL VALUE |
| 47 | TANKY NIPPLE 25MM |
| 48 | TANKY NIPPLE 32MM |
| 49 | PPR UNION 25 MM |
| 50 | PPR UNION 32 MM |
| 51 | PE-AL-PE COMPOSITE PRESSURE PIPES AND FITTINGSProviding and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilizedwith carbon black having thermal stability for hot and cold water supply,capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge:External work including trenching and refilling etc. complete3240 (40mm OD) pipe |
| 52 | Providing and fixing 1.5 HP electric motor pump kirloskar,crompton greaves or equivalent completely fixed with all necessories / fittings complete in all respects. |
| 53 | Cutting holes up to 20x20X45 cm in walls,Rccfloors,beams and roofs for passing drain pipes etc including making good the With cement concrete 1;1.5;3 including finishing complete as to make it leak proof. |
| 54 | Providing and laying water proofing treatment in sunken portion ofWCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with waterproofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with waterproofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of alljoints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 55 | Constructing brick masnory manhole complete job 500 x 500 x450 with C.I cover 450 x450 . |
| 56 | 15mm Cement plaster on the rough side of single or half brick wall ofmix:1 : 6 ( 1 cement : 6 fine sand) |
| 57 | Providing and laying Ceramic glazed floor l tiles (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete complete (In all colours, shades, except White, Ivory, Fume Red Brown)(300mm x450mm ) |
| 58 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm |
| 59 | Providing and laying gang saw cut of specified thickness, mirror polishedpre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand)including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-18 mm thick |
| 60 | Brick work with common burnt clay (non-modular) bricks of classdesignation 7.5 in foundation and plinth including curing in :Cementmortar1:6(1 cement : 6coarse sand)Extra for brick work withcommonburntclaybricks/cement concrete bricks insuperstructure aboveplinth level upto floor five level |
| 61 | Half brick masnory with common burnt clay (non - modular) bricks of class designation 7.5 in foundation & plinth complete |
| 62 | Providing & Laying of Pre Cast RCC Rings of concrete grade (M-20) 1200mm dia for making of Sokage pits inclusive of all earthwork, laying of precast rings, with RCC slab top & interconnecting with pits which shall be made Staggerly or as directed by Enginer I/C |
| 63 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed 50 mm nominal bore.) including CI pipe for fixing at end purpose |
| 64 | Varnishing with varnish of approved brand and manufacture:Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish. |
| 65 | Providing and fixing 3.5mm thick panels of plain glass for fixed glazing panels/shutters including cost of teak wood beadings of required size |
| 66 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted withfine sand including finishing the top smooth and curing complete |
| 67 | Dry random rubble masonary with hard stone in foundation and plinth with bond stone. |
| 68 | Random Rubble masonry with hard stone in foundation and plinth includingleveling up with cement concrete 1:6:12 (1 Cement : 6 coarssand : 12graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 69 | Upto Plinth level |
| 70 | Above Plinth |
| 71 | Providing and fixing of Khatambandi ceiling (panch murba of ist class budloo wood of secified attern in celling etc including necessary frame work of 50mmx75mm size including cornice 75x75mm/2 of bodloo wood and 12mm thick ly board frame in linning comlete in all resects |
| 72 | Providing and fixing 12mm T&G Planks made of imorted wood (new zealand ine or equivalent) on wood work in false celling, wall/ wall artions sawn and ut u in osition budloo celling joists of 50mmx65mm in sections laced 600mm c/c both ways all comlete |
| 73 | Providing and fixing 75x50mm thick fancy cornice comlete with nails etc |
| 74 | Providing and fixing AC5 grade laminate wooden flooring (ACS Grand Woodpecker or equivalent approved make) of approved shade and texture, having thickness not less than 8 mm, consisting of high-density fibreboard (HDF) core with decorative laminate surface and protective wear layer, conforming to relevant EN standards, including providing and laying 2-3 mm thick polyethylene foam underlay over prepared, clean, dry and level subfloor, laying laminate planks with click-lock interlocking system in proper alignment with tight joints and uniform pattern, maintaining necessary expansion gaps along walls and fixed surfaces as per manufacturer specifications, including cutting, trimming and fitting around corners, columns, door frames and other obstructions, and providing and fixing matching skirting/edge beading and transition strips wherever required, complete in all respects, including cost of all materials, labour, tools and plant, wastage and incidental charges, as per direction of Engineer-in-Charge. Unit sqm. |
| 75 | Providing and Fixing of 50mm dia stainless steel railing of 304 grade of hallow tube 1.6 mm thick of Jindal/Salem make or equivalent including welding and fixing with stainless steel machine screws for making required size and shape, buffing etc. Complete and fixing stainless steel balusters upto 900 mm height and S S tubes, three in one installed horizontally including cutting, welding, grinding to required shape and size by required steel dash fasteners, nuts, bolts, screws ,etc. in floors and treads including providing SS shoe at each balusters complete as per architectural drawings and as per the directions of engineer incharge including cutting of granite/marble floors and fastening with lead grouting if required, complete in all respects. New Acralic Glass Design Railings Colour Light. |
| 76 | Providing & fixing of stainless steel nevel post (Ornamental ) including top ball of AISI 304 grade of required height duley anchored to floor with dash fasteners . Height of the nevel post shall not be less than 1050 mm above the finished skirting level all complete as per architectural drawings (including cost of all material, leads, lifts and carriages etc upto site of work complete).Complete as per the directions of Engineer incharge.New Acralic Glass Design Nevel Post Colour Light |
| 77 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement: 6 coarse sand) upto plinth level including curing. One face dressed, Rough chisel dressed |
| 78 | Providing and fixing Wudu washbasin (ablution basin) of approved design and make, suitable for performing ablution, fabricated from high-quality ceramic/solid surface/FRP/SS (as specified), with smooth, non-porous, and easy-to-clean finish. The basin shall be ergonomically designed for foot washing, complete with anti-skid surface and adequate slope for proper drainage.The unit shall include necessary fittings such as chrome-plated brass/PPR bib tap or sensor tap, waste coupling, bottle trap/floor trap connection, and all required inlet and outlet piping arrangements. The basin shall be fixed on a suitable support frame or wall-mounted arrangement at appropriate height, ensuring stability and proper alignment.The work includes connection to water supply and drainage lines, sealing of joints, testing for leakage, and making good the surrounding surfaces. All accessories, fixtures, fasteners, labour, tools, and consumables required for complete installation shall be included.The item shall be completed in all respects as per approved drawings, specifications, and direction of Engineer-in-charge. |
| 79 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 80 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. |
| 81 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 82 | Electric Part |
| 83 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 84 | Group C |
| 85 | Wiring for Light /Power Plug with 2 x 4 sq.mm FRLS PVC Insulated Copper Conductor single core cable in surface/Recessed medium class PVC Conduit along with 1 No. 4 sq.mm FRLS PVC Insulated copper conductor single core cable for loop earthing as required. |
| 86 | Wiring for Circuit/Submain Wiring along with earth Wire with the following Sizes of FRLSPVC insulated copper conductor,single core Cable in surface/Recessed medium class PVC conduit as required. |
| 87 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 88 | 4 X 16 sq. mm + 2X 6 sq. mm earth wire |
| 89 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 90 | 4X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 91 | Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required |
| 92 | Supplying and Fixing suitable size G.I box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch,connection,painting etc. as required. |
| 93 | Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top along with 30 A \\"C\\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 94 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket |
| 95 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. |
| 96 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. |
| 97 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 98 | Supplying and fixing 5 amps. to 32 amps.rating 240 volts 'C' series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 99 | Single Pole |
| 100 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 101 | 8 way (4 + 24), Double door |
| 102 | Supplying and fixing following rating, Four pole, 415 V, 10 Ka M.C.B in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 103 | 63 A F.P MCB 10 Ka \\"C\\" Curve |
| 104 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. |
| 105 | 12 way , Double door |
| 106 | Supplying and Fixing of Following Ratings of D.P MCB 240 Volts \\"C\\" Series in the Existing MCB D.B complete with connections, Testing and Commissioning Etc. as Required. |
| 107 | 63 A D.P MCB 10 Ka \\"C\\" Curve |
| 108 | 16 A D.P MCB 10 Ka \\"C\\" Curve |
| 109 | 25 A D.P MCB 10 Ka \\"C\\" Curve |
| 110 | 32 A D.P MCB 10 Ka \\"C\\" Curve |
| 111 | Supply and Fixing Single Pole Blanking Plate in the Existing MCB DB complete as Required. |
| 112 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 113 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 114 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 115 | Supply installation testing and commissioning of IP:20 Aluminium Batten 40 W +- 1 W LED Surface Mounted 4 ft. with system lumen efficacy of 100 lm/W and P.F >0.9 THD <20% CCT 6500K,CRI 80 .The LED should have life of 50000 Burning Hours at L70.The input voltage shall be 150 V to 270 V.The fixture should have inbuit surge protection of 2KV.Certification-LM 79 and LM 80.The test report should be from Govt. Approved Lab/inhouse NABL Lab. |
| 116 | LED Down lighter (SMD Type) (System lumen efficacy >135lm/Watt) Supplying, Installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round /square/Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range - 5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 |
| 117 | 18 watt |
| 118 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning ,of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). |
| 119 | 90 Watt |
| 120 | Supply,Installation,Testing and Commissioning 486 Cu.m/Hr. AC 220-240 Volts, 50 Hz exhaust fan made out of Metal Body with inbuilt thermo cutoff Protection and Noise Level not exceeding 37 dB of Following Sizes including connection etc. complete as required . |
| 121 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC).Motor, class of insulation: B, 3 nos. metal( Aluminium and earthing etc. as required make usha/cg/havells/ |
| 122 | 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 123 | Supply installation testing and commissioning of 2.2 KVA Sine Wave Inverter , Input 1 Phase 3 wire and output 1 phase 3 wire with 2 Nos of 12 V 200 aH Battery. |
| 124 | Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers, Out Goings, Bus Bars etc. as required as per the Following Description.(IP:42) ( Main Distribution Panel). The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD INCOMERMCCB 200 A F.P 36 Ka with Adj.T.M.R With Icu=Ics=100%(02 Nos)Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch, Indicating Lamps, C.T Set,Bus Bar (300-500 Amps) and MCB Strip of suitable size as Required.OUTGOINGSBy Changeover 100 A 4 P 415 Volts with AC-23 Duty(01 Nos)Size of wiring for CTS:- 2.5 sqmmSize of wiring for voltage sensing Metering :-4.0 Sq.mmSize of wiring of all push buttons, indicating lamps:-1.5 Sq.mmTypes of wires:-PVC insulated 1100V grade ,Multistrand copper conductor Flexible FR-LSHHinged Door Earthing:-Device mounted hinged doors connected to cubicles body by means of 2.5 sqmm.green copper flexible wire .The Complete Panel Shall be Made out of 2.0 mm CRCA sheet including Frame/Partitions/Doors etc.Gland Plates to be 3.0 mm Thick. |
| 125 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 126 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) |
| 127 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 128 | Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in groundin Existing DWC Pipe including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 129 | 3.5 C X 120 Sq.mm A2XFY |
| 130 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 131 | 120 mm dia (OD-63 mm & ID-51 mm nominal) |
| 132 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 133 | 1 or 2 Module (75mmX75mm) |
| 134 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 135 | Telephone socket outlet |
| 136 | Television socket outlet |
| 137 | Computer Socket RJ45 Modular type |
| 138 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 139 | 2 Pair |
| 140 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 141 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. |
| 142 | 1 run of cable |
| 143 | Supply, installation, testing and commissioning of Junction Boxes/DB-10 Pairs with Original Krone module and Back Mount Frame and have Lock -n- key, complete in all respect as per specification and desired by EIC |
| 144 | Supply & Erection of lockable 12 U rack with 5A strip and two fan for distribution, mounting of patch panels, hubs, switches etc,, complete as per specification and as desired by EIC. |
| 145 | Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR Fixed Lens Dome Camera, 1/2.8\\" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, triple stream at various resolution & Frame Rates, Min. Illumination required 0.007 lux (color), 0 Lux IR On, 2 IR LEDs, Smart IR with upto 50m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265, H.264 & MJPEG , Fixed Lens 2.8mm, Field of View FoV H:90°, V:62°, BLC, HLC, WDR, 3DNR, White Balance - Auto/Manual, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 4 Privacy Mask, 8 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 2-Way Audio Full Duplex Line IN/Out, 256GB SD card support, Alarm: 1In/1out, PoE (802.3 af) and 12V DC, Max 5W, IP 66/67 & IK10 with Die Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T Compliant, UL/CSA, CE, FCC, EN, RoHS & NDAA Section 889 compliant. |
| 146 | Supply & Erection of CAT 6, 16 port Jack panel for termination of CAT6 cable,Testing & certification of the network with Omni/Penta Scanner of each Cable. |
| 147 | Supply & Erection of Cat-6, 1Mtr Patch Cords complete as per specification and as desired by EIC. |
| 148 | Supply & Erection of Cat-6, 3Mtr Patch Cords complete as per specification and as desired by EIC. |
| 149 | Supplying and drawing of 12 Pair Single Mode Optical Fibre Cables in the existing surface/ recessed Steel/ PVC conduit as required. |
| 150 | Supply & Erection of Media Convertor complete as per specification and as desired by EIC. |
| 151 | Supply & Erection of Termination Box complete as per specification and as desired by EIC. |
| 152 | Supplying, Installation,Testing and Commissioning of 55 Inches Ultra H.D LED Display Monitor as per the Specifications attached. |
| 153 | Supply , Installation , Testing and commissioning of 16 Channel NVR (Network Vedio Recorder) Embadded Linux based for recording upto 16CH @ D1 with 02 nos. SATA HDDs minimum 20TB storage or more (recording requirement all cameras recording at D1, 25fps for 30 days), H.265 HEVC/H.264/MJPEG codec decoding, Front Control Pannel with LEDs Indication, 2 nos. USB, ONVIF S, Time Sync with NTP, Encrypted Streaming & Control, 2-Way Audio Line & Out, PTZ Operation Pan, Tilt, Zoom, Support, Pre & Post Alarm Recording Support, Recording/Evidance Clip Export to USB, 16 Channel Syncronous Playback, Playback control i.e Play, Pause, Stop, Fast Forward, Backward, Timeline & Zoom; Snapshot, Web Client, Central Monitoring Softawre, iPhone; iPad; Android based Mobile clients, 01HDMI & 01VGA Output, 02 On Board HDDS each up to 10TB, Alarm Input (1 nos.), Alarm Output (01 nos.), NDAA Section 889 Compliant, Operating Temperature –10°C to 55°C, Certification : Certifications: ONVIF compliant, UL/CSA, CE, FCC, EN, NDAA & RoHS compliant.including fixing accessories and cable termination with required connectors/Jack, complete in all respect as per instruction of engineer in-charge. |
| 154 | Supply, Installation, Testing and Commissioning of 10TB 7200 rpm SATA 6 Gb/s 3.5\\" Internal Enterprise Hard Drive |
| 155 | Supply, Installation, Testing and Commissioning of 10/100/1000 Mbps Unmanaged Switches with Provision of 16 10/100/1000 Mbps ports as per specification and as desired by the Engineer Incharge. |
| 156 | FIRE FIGHTING |
| 157 | Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, lockingarrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set. Amplifier change over switch for inter changing amplifier- 1 No.Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete asrequired -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt,30 AH each sealed maintenance free batteries -1 set. |
| 158 | Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. |
| 159 | Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. |
| 160 | Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. |
| 161 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required |
| 162 | 2 x 1.5 sq. mm |
| 163 | Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required. |
| 164 | SITC of Dry Type Co2 Type Fire Extinguisher 4.5 Kg |
| 165 | SITC of ABC Type Fire Extinguisher IS 15683 4.0 Kg Having Deep drawn and CO2 MIG welded can construction ,Epoxy polyester powder external coating, Epoxy powder internal coating, Body Thickness 1.6 mm(Cease fire) |
| 166 | Note:-The rates quoted are inclusive of all carriages of materials (Mechanical/Manual) from source to site work and all extra charges including dewatering if any during the execution of work complete in all respects. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender