Tender For Construction Of Additional Block At T-7 Quarter Tulsibagh.
Tender Value
20 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
16 days left
EMD
40000
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Additional Block At T-7 Quarter Tulsibagh.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: |
| 2 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 3 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineerin-charge:- In cement mortar |
| 4 | Dismantling roofing including ridges, hips valleys and gutters etc.,and stacking the material within 50 meters lead of :- G.S. Sheet |
| 5 | Labour Charges for corrugated G. S. sheet roofing including vertical/curved surface fixed with nails and washers including cutting to size and shape wherever required with necessary scaffolding wherever required as per the directions of Engineer Incharge. |
| 6 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 7 | Providing and laying of stone soling,hand packed including all carriages. |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2 :4 (1 cement :2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 11 | Reinforced cement concrete workin beams, suspended floors, roofs havingslope upto15°, landings, balconies, shelves, chajjas,lintels, bands, plain windowsills, staircasesandspiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with --- 1:1½:3 (1cement: 1½coarses and: 3graded stone aggregate 20mm nominal size) |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 14 | Foundations, footings, bases of columns etc. for mass concrete. |
| 15 | Suspended floors, roofs, landings, balconies and access platforms. |
| 16 | Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 17 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). KD wood. |
| 18 | Providing hoisting and fixing trusses / purlins/ rafters/ posts/ pos tplates or like components including cost ofscrews etc. complete: Budloo/Firwood |
| 19 | Supplying and filling in plinth with stone dust /soling as approved by eng inch incl all leads & lifts |
| 20 | Providing and fixing 35 thick panell door with 6 to 8 panells of 35 mm thick wood , with desired profile and pattern as aproved by competant authority including fixing with butt hinges of required size with necessary screws,with ALL FITTINGS AND FASTNINGS LIKE ornamental HANDLE, TOWER BOLTS 230 etc of, 35 mm thick K.D Wood in door frame as well as in panells panells included as per the direction of Engineer Incharge. Including French spirit polishing, Two or more coats on new works including a coat of wood filler and make base a complete job |
| 21 | Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of averagewidth for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size withnecessary screws . Including two or more coats of synthetic enamel paint with one of coat of wood primer. KD wood. |
| 22 | Providing and fixing glazed shutters 35 mm thick for doors, windows and clerestory windows using 3.5 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw with ALL FITTINGS AND FASTNINGS LIKEHANDLE, TOWER BOLT100 mm etc . Including two or more coats of synthetic enamel paint with one of coat of wood primer, of K.D Wood including all hardware fittings |
| 23 | Providing and fixing of Kitchen cabinets / Amirah made of 19 mm thick (BWR)ply wood in sides, shelves and front shutters and back with 6mm thick (BWR) ply wood including lining of front shutters with sun-mica or teak wood mirror polished as per approved drawings icluding one coat of primer and painting two or more coats of synthetic enamel paint of approved quality and color inside including all Brass hardware fittings,glazing and drawer telescopic channels etc. wherever required & locking arrangements (As per the directions of EIC) all inclusive complete job.(Face area of the cabinet will be measured for payment) including all carriages:-600mm |
| 24 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 up to floor v level curing in : Cement lime mortar 1:1:6 ( 1 cement : : 6fine sand) |
| 25 | 15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 26 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved urface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 27 | Providing and fixing plain ornamental eaves boarding with necessary fittings 250 mm*35 mm of imported KD wood / budloo wood |
| 28 | Providing and fixing of imported wooden panelling lining on walls, ceilings tongued and grooved planks including cost of ground work of 12mm to 10mm (as per requirement) thick ply 50mm wide 600mm *600mm center to center harizontally and vertically fixing with rawl plugs and screws and cover mouldings but including cost of nails, screws and scafolding etc. including cost of two coats of touch wood and 50mm wide wooden cornice etc. complete (12mm thick) |
| 29 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 30 | Providing and fixing of PVC pipes and fittings Type B (prince,fenolic or equivalent) |
| 31 | 75 mm plain bend |
| 32 | 100 mm plain bend |
| 33 | 75 mm door bend |
| 34 | 75 mm plain Tee |
| 35 | 100 mm plain Tee |
| 36 | collar 75 mm |
| 37 | collar 100 mm |
| 38 | Floor trap 75 mm |
| 39 | Floor trap 100 mm |
| 40 | 100 mm dia pipe |
| 41 | 75 mm dia pipe |
| 42 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801 UV Stabilized and anti microbial fusion welded, having thermal stability for hot and cold water supply excluding all PP-R plain and brass threaded Polypropylene random fittings. . This includes testing of joints complete as per direction of Engineer-in charge. Internal Work -Exposed on wall with clamps at 1.00 meter spacing |
| 43 | PN-16 Pipe, 25 mm OD(SDR-7.4) Work - Concealed work including cutting chases and making good the wall etc. |
| 44 | PN-16 Pipe, 32 mm OD(SDR-7.4) Work - Concealed work including cutting chases and making good the wall etc. |
| 45 | Gate Valve 25 mm dia. Nominal bore |
| 46 | Gate Valve 32 mm dia. Nominal bore |
| 47 | Ball Valve 25 mm dia. Nominal bore |
| 48 | Ball Valve 32 mm dia. Nominal bore |
| 49 | Providing and fixing of CP brass fittings of standard quality and make jaguar/equielant |
| 50 | Concealed stop cock |
| 51 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as manfacturers specification (1 kg /50 kgof cement) |
| 52 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI mark 4 layer (syntex,vectus, supermen or eqv) ISI:12701marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 53 | Providing and fixing GI 3/2 inch tanky nipple |
| 54 | Carriage of material by MT from source to site. |
| 55 | Bricks for an avg lead of 15 Km |
| 56 | Sand / Aggregate for an avg lead of 15 Km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender