Tender For Strengthening/Upgradation Of Pinglena Mandina And Tengpora Pathan Road (Balance Work).
Tender Value
2.07 Crore
Estimated cost
Bid Submission
03 Oct 2026
7 days left
EMD
4.15 Lakhs
Bank guarantee accepted
Document Fee
5500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Strengthening/Upgradation Of Pinglena Mandina And Tengpora Pathan Road (Balance Work).
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish with all leads and lifts carriage complete in -All kinds of soil. |
| 2 | Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified marterial within all lifts and lead upto 1000 meter (by mechanical means) |
| 3 | Supplying and filling of Nalla muck/RBM of specified grade and size including watering, dressing, and ramming with PRR 8 to 10 ton capacity with all carriages, loadig/unloading complete. |
| 4 | Providing Supplying Laying stacking and compacting of graded stone aggregate at site of size range 63-45mm size i/c Supplying Laying stacking and compacting of stone screenings, chippings at site (13.2mm nominal size). i/c Supplying Laying stacking and compacting of moorum(stone dust) including loading unloading and carriage of all materials complete job. |
| 5 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge incld carriage of all materials involved complete. |
| 6 | Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On W.B.M. @ 0.75 Kg/sqm.incld carriage of all materials involved complete. |
| 7 | Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On BT surface @ 0.50Kg/sqm.incld carriage of all materials involved complete. |
| 8 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity..incld carriage of all materials involved complete. |
| 9 | Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG- 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity incld carriage of all materials involved complete. |
| 10 | Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.incld carriage of all materials involved complete. |
| 11 | Providing and laying of 12\\" Φ RCC spun pipes in proper level and grade including trench excavation and cushion as per clause 2900 of MORTH specification including all carriages involved complete |
| 12 | Providing and laying of 18\\" Φ RCC spun pipes in proper level and grade including trench excavation and cushion as per clause 2900 of MORTH specification including all carriages involved complete |
| 13 | Providing and laying of 24\\" Φ RCC spun pipes in proper level and grade including trench excavation and cushion as per clause 2900 of MORTH specification including all carriages involved complete |
| 14 | Supply and filling of Khak Bajri including ramming, dressing, watering and consolidation with Power Road Roller (8-10 Tonne to regquired gradient and camber including all carriages with loading, un-loading, stacking etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender