Tender For special Repair To Jco/Or Swimming Pool Under Zone-I Area At Jaipur Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Oct 2026
19 days left
EMD
97360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Jco/Or Swimming Pool Under Zone-I Area At Jaipur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 3 | M&L for brick work with sub-class 'B' bricks (old size), straight or curved on plan exc 6m mean radius built in In cement mortar 1:6 complete all as specified and directed |
| 4 | M&L for brickwork with subclass ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 5 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises complete all as specified and directed. |
| 6 | M&L for 25mm thick PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in flooring and all other similar works finished even and fair complete all as specified and directed. |
| 7 | M&L for coloured jointfree matt finish non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed |
| 8 | M&L for coloured glazed ceramic tiles 450mm/600mm X 300mm X 7 to 8mm thick on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed |
| 9 | M & L for light shade joint free full body vitrified ceramic tiles 10mm thick (square/rectangular) of approved shade, polished, area of each tiles not exceeding 0.36 sqm on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed |
| 10 | Providing and laying 10–15 mm thick Endura Maxgrip tiles of size 300 × 300 mm, on prepared surfaces using approved waterproof chemical tile adhesive, accurately set, aligned and levelled with 3 mm spacers, including all necessary cutting, edge finishing and fitting. Joints shall be thoroughly cleaned by blowing compressed air and neatly filled/pointed with approved epoxy grout matching the shade of the tiles, including surface cleaning, curing, all materials, labour, tools, equipment, scaffolding and incidental works, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 11 | Providing and applying waterproofing to vertical and horizontal surfaces of swimming pool using two-component polymer-modified cementitious waterproofing slurry, such as Fosroc Brushbond or approved equivalent, in two coats, including thorough surface preparation, cleaning, filling of cracks/honeycombs and minor repairs, treatment of corners, joints and pipe penetrations, mixing and application as per manufacturer’s recommendations, curing and protection, including all materials, labour, tools, equipment, scaffolding and access arrangements, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 12 | M&L of ceramic swimming pool tiles for vertical surfaces, 7–8 mm thick, of approved quality, having water absorption less than 3.0% and modulus of rupture (MOR) more than 23 N/mm², in approved colour, shade, size and finish, including all necessary pool fittings/special pieces such as internal cove, external cove, internal wall angles, floor-wall junctions and other required profiles, complete. Tiles shall be fixed over properly prepared surfaces using approved waterproof, chemically resistant tile adhesive suitable for swimming pools, ensuring proper alignment, level, line and uniform joints. All joints shall be filled and pointed with approved Chlorine-resistant, waterproof epoxy grout chemical, matching the colour and shade of the tiles. The work shall be carried out as per manufacturer's recommendations and complete in all respects as specified and directed by the Engineer-in-Charge. |
| 13 | M & L for ceramic swimming pool floor tiles, 7–8 mm thick, slip-resistant/matt finish of approved quality, having water absorption less than 3.0% and modulus of rupture (MOR) more than 23 N/mm², in approved size, colour, shade and finish, including all necessary swimming pool special fittings/profiles such as internal cove, external cove, internal wall angles, floor-wall junctions and other required accessories. Tiles shall be laid over properly prepared surface using approved waterproof, chemically resistant tile adhesive suitable for swimming pool applications, ensuring proper line, level, alignment, slope and uniform joints. All joints shall be filled and pointed with approved Chlorine-resistant, waterproof epoxy grout chemical matching the shade of tiles The work shall be carried out as per manufacturer's recommendations and complete in all respects as specified and directed by the Engineer-in-Charge. |
| 14 | Taking down cement plaster or cement lime plaster, any description on brick, stone walls or concrete surface of ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 15 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick masonry surfaces or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick masonry surfaces or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for rendering 5 mm thick in CM 1:3 on concrete surface of ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for preparing newly plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over 1mm thick wall care putty & a coat of primer to make smooth the undulated surfaces complete all as specified and directed. |
| 19 | M&L for preparation of newly plastered surface of walls and applying two coats of premium acrylic smooth exterior emulsion paint, 1st quality (company depot tinted) of approved manufacturers in required colour and shade using hand roller over and including one coat of alkali resistant priming paints over 1mm thick wall care putty incl rubbing down complete all as specified and directed . |
| 20 | M & L for preparation of newly plastered surfaces of ceiling & applying two coats of distemper with distemper oil emulsion on ceilings complete all as specified and directed. |
| 21 | M&L for complete removal of exising treatment on old plastered surfaces of wall by mechanical means thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work, preparation of surafce and applying two coat of premium acrylic smooth exterior emulsion paint, 1st quality (company depot tinted) of approved manufacturers in required colour and shade using hand roller complete all as specified and directed. |
| 22 | M&L for complete removal of exising treatment on old plastered surfaces of wall by mechanical means thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work, preparation of surafce of walls and applying two coats of distemper oil emulsion white or tinted with hand roller/ by mechanical means complete all as specified and directed. |
| 23 | M&L for for complete removal of existing treatment of old plastered surfaces of ceilings and applying two coats of distemper oil emulsion white or tinted with hand roller/ by mechanical means complete all as specified and directed. |
| 24 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. |
| 25 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. |
| 26 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing given in SSR Part-I complete as directed and specified. |
| 27 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 28 | S & F 125 mm long butt hinges stainless steel (Grade SS-304) medium weight and fixed complete all as specified and as directed. |
| 29 | S&F 250mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 30 | S&F 150 mm long aluminium anodised barrel tower bolt extruded section and fixed complete all as specified and directed. |
| 31 | S & F 150mm long aluminium handles, cast type, anodised complete all as specified and directed. |
| 32 | M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket complete all as specified and directed. |
| 33 | M&L powder coated anodised aluminium window and ventilator shutters, side hung type without sash, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium fittings such as peg stays 150mm long 1 No, hinges type B-21, 100mm long (2 No) suitable handle 1 No complete all as specified and directed. |
| 34 | S& F in repair Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed |
| 35 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvnaied wire staple complete all as specified and directed by Engineer-In-Charge. |
| 36 | S&F 5mm thick plain sheet glass, odinary quality and glazing with neoprene beading in window and door in square n exc 0.5 Sqm in each pane complete all as specified and directed. |
| 37 | S & F 5mm thick tinted/ frosted type sheet glass, ordinary quality and glazing with and incl silicon in sqaures not exc 0.5 sqm in each pane complete all as specified and directed. |
| 38 | S & F in repair 500 Ltrs capacity rotational moulded polyethylene water storage tanks, white, triple layered (cylindrical vertical with closed top) hoisted and fixed in position & including all fittings such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc incl dismantling of old tank all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge. |
| 39 | S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.Note : Minimum weight for 20 mm dia shall not be less than 210gms. |
| 40 | S&F in repair 25mm bore stop/angle valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed for iron pipes or for unions and fixed complete all as specified and directed. |
| 41 | S&F in repair 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor including taking down old tubing complete all as specified and directed. |
| 42 | S&F in repair 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor including taking down old tubing complete all as specified and directed. |
| 43 | S&F in repair 25 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor including taking down old tubing complete all as specified and directed. |
| 44 | S&F in repairs vitreous China white single piece EWC (European type) of size 750mm x360mm x660mm incl inbuilt dual flush flushing cistern, S trap and soft close seat cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and fixed complete all as specified and directed. |
| 45 | S&F as in repair 15 mm bore two way bib tap, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 46 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 47 | S&F in repair toilet paper holder with flat recessed chromium plated, stainless steel (SS-304 grade) with suitable fixing arrangements all as specified and directed. |
| 48 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550 x 400 mm excluding taps, waste pipe, chain & plug and porcelene stopper but including brackets /fastners, 32mm dia brass chromium plated waste coupling with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe, cutting for and pinning in ends of brackets, including fixing of pillar tap complete all as specified and directed. |
| 49 | S&F in repair 32 mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. |
| 50 | Supply only 15mm bore pillar tap, swan neck, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, high pressure with or without lettered 'Hot' or ' Cold' with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 51 | S & F in repair vitreous china urinal, full stall long body type, white, of size 375x390x590mm including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with grating and union for discharge pipe including PVC waste pipe and CP waste coupling complete all as specified and directed. |
| 52 | S&F in repair PVC Connections 15mm size, 600mm long with PTMT nuts complete all as specified and as directed. |
| 53 | S&F in repair soap dish, stainless steel, approx size 160x160x90 mm fixed with chromium plated brass screws complete all as specified and as directed. |
| 54 | S&F in repair 2100mm x 750 mm bevelled edge mirror 5mm thick of selected quality glass mounded on 6 mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washer with aluminium channel of suitable section alround all as specified and directed |
| 55 | S&F in repairs 15 mm bore bib tap, fancy type, chromium plated cast copper alloy with cruth or butter fly handle, long body, screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 56 | S&F in repair 75 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints laid in trenches or floors incl taking down complete all as specified & directed. |
| 57 | S&F in repair 110 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints laid in trenches or floors incl taking down complete all as specified & directed. |
| 58 | S&F in repair 75 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints fixed to wallls with suitable size clamp incl taking down old complete all as specified & directed. |
| 59 | S&F in repair 110 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints fixed to wallls with suitable size clamp incl taking down old complete all as specified & directed. |
| 60 | M&L for concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes of 75 to 100mm dia incl. packing under and hanching against the side of pipes after laying and testing of pipe complete all as specified and directed. |
| 61 | S&F 75 mm dia UPVC (SWR) bends any radius with access door complete all as specified and directed. |
| 62 | S&F 110 mm dia UPVC (SWR) bends any radius with access door complete all as specified and directed. |
| 63 | S&F 75mm dia UPVC (SWR) junction single (Single Tee with access door) equal or unequal with oval access door complete all as specified and directed. |
| 64 | S&F 110mm dia UPVC (SWR) junction single (Single Tee with access door) equal or unequal with oval access door complete all as specified and directed. |
| 65 | S&F 75 mm PVC (SWR) vent cowl complete all as specified and directed. |
| 66 | S&F 110 mm PVC (SWR) vent cowl complete all as specified and directed. |
| 67 | S&F in repair 110mm dia UPVC (SWR) outlet cockroch proof floor trap including jointing with solvent cement complete all as specified and directed. |
| 68 | M&L 15-16mm thick granite work (table rubbed & polished) (Rajasthan black) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & incl 15 mm screed thick in CM 1:4 complete all as specified and directed . |
| 69 | M&L for Rounding to edges of stones slabs , granite one edge, such as in steps, cooking platform and other similar situations incl polishing complete all as specified and directed. |
| 70 | M&L for 15 mm thick polymer-modified mortar on load-carrying RCC members applied in two layers, comprising approved polymer, cement and graded quartz sand in the proportion of 1:5:15 by weight, with water as per manufacturer's recommended water-cement ratio for desired consistency. Surface shall be properly cleaned and prepared before application. The mortar shall be uniformly applied, finished by floating/trowelling and properly cured after initial setting complete as per manufacturer's specifications and direction complete all as specified and directed by the Engineer-in-Charge. |
| 71 | M&L for for applying SBR based bonding agent to the entire concrete surface prior to building up of concrete with Polymer modified mortar or any other treatment, (consumption Qty as per manufacturer’s instructions but min 0.4 kg/Sqm approx) including cleaning the surface to remove dirt, dust or any other impurities on the surface, etc. complete in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as specified and as directed by Engineer-in-charge.Make:- Sika- Latex SBR / Fosroc-Nitobond SBR Latex / Asian SmartCare Repair Polymer or equivalent as approved by GE Please Enable Macros to View BoQ information |
| 72 | M&L for for applying SBR based bonding agent to the entire concrete surface prior to building up of concrete with Polymer modified mortar or any other treatment, (consumption Qty as per manufacturer’s instructions but min 0.4 kg/Sqm approx) including cleaning the surface to remove dirt, dust or any other impurities on the surface, etc. complete in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as specified and as directed by Engineer-in-charge.Make:- Sika- Latex SBR / Fosroc-Nitobond SBR Latex / Asian SmartCare Repair Polymer or equivalent as approved by GE Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender