Tender For Providing Centrifugal Sewage Non - Clog Pump (Discharge Upto 20 M3/ Hour) , 100 Mm Dia Gi Piipeline , Parapet Wall And M.S Grill Work Cover For Existing Openwell At Lalagunda In Ward No.17 , Zone-Iv Office In Vellore Corporation
Tender Value
13.80 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
9 days left
EMD
27601
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vellore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Centrifugal Sewage Non - Clog Pump (Discharge Upto 20 M3/ Hour) , 100 Mm Dia Gi Piipeline , Parapet Wall And M.S Grill Work Cover For Existing Openwell At Lalagunda In Ward No.17 , Zone-Iv Office In Vellore Corporation
BOQ
| Sl. No. | Item Description |
| 1 | Supply and delivery of submersible centrifugal sewage non-clog pumps, vertical spindle type pump, wear resistance with submersible motor for the various duty conditions. Pump shall be capable of handling min 100 mm solid size with sewage specific gravity of up to 1.05. Pump shall be of robust construction, Liquid passages shall be finished smooth and designed as to allow free passage to solids. (upto 5 HP - DOL Starter, above 5 HP to 25 HP -Star Delta) Panel and beyond 25 HP shall be ATS) |
| 2 | Discharge Upto 20 m3/hour (WD -M2078 TWAD 25-26) |
| 3 | Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter (65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately) |
| 4 | 25 HP (WD-M1920 TWAD 25-26) |
| 5 | Supply and delivery of 16.00 sq.mm PVC insulated and sheathed 3 Core Flat type Copper Cable conforming to IS 694/1990 including all cost of material and labour charges etc., complete as per standard specifications WD-M1978 TWAD SoR 24-25 |
| 6 | Earthwork open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specifications (Grade Beam) |
| 7 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 8 | Plain Cement Concrete 1:2:4 mix (One Cement ,two sand and four aggregate) using 20mm ISS gauge HBBG metal from the approved quarry including mixing, laying, consolidating, curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification |
| 9 | Plastering with cement mortar 1:5 mix, 12mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 10 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mm x 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25mm x 3 mm including cuting, welding, grinding, locking arrangements and labour charges etc., complete WD-M1471 TWAD SoR 25-26 |
| 11 | Centering for sides and soffits for plain surface such as slabs lintels sunshades staircase waist slabs etc., including strutting 3m high using M.S sheet of size 90cm X 90 cm and 10 Gauge fitted with M.S Angle of size 25x25x3mm laid over silver oak (C.wood) joists of size 10x6.50cm spaced at about 90 c/c and supported by casurina props 10 to 13 cm dia spaced at about 75 c/c complying with standard specification |
| 12 | Grade Beam |
| 13 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors |
| 14 | Reinforced Cement Concrete 1:1.5:3 (One Cement, One and half sand & Three coarse aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. |
| 15 | Fdn. and Basement |
| 16 | Brickwork in CM 1:5 (One Cement & Five Crushed Stone Sand (M- Sand) using II class ground moulded bricks of size 9\\" x 43/8\\"x 23/4\\" including finishing, curing, etc., complete complying with standard specification. |
| 17 | Supply and fixing of M.S Grills for Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 18 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc,complete as per standard specification |
| 19 | Plastering with cement mortar 1:5 mix, 12mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 20 | Supply and delivery of 100 mm G I PIPE (MEDIUM) AS PER IS 1239/PART I/2004 ISI make in good quality including cost of all material charges and all labour charges etc., complete as per standard specifications. WD -M0492 TWAD 2025-26 |
| 21 | Supply, delivery and fixing of GI Specials including cost of all material charges and labour charges etc., complete as per Specifications |
| 22 | 100 mm GI Tee Elbow -WD-M 0594 TWAD 2025-26 |
| 23 | 100 mm GI Coupling WD-M0596 TWAD 2025 -26 |
| 24 | 100 mm GI Bend WD-M 0602 TWAD 2025 -26 |
| 25 | Lowering GI pipes and specials in the trenches and laying to proper grade and alignment, jointing with GI Specials and as directed by the TWAD Officers (80mm to 100 mm dia) WD-W 0262 TWAD 2025-26 |
| 26 | Laying of G.I. Pipes and specials to proper line and level including jointing but excluding cost of pipes and jointing materials for plumbing works for providing water supply and sanitary works in the premises of the building (65 mm to 150 mm dia) WD-W0735 TWAD 2025-26 |
| 27 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification |
| 28 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. |
| 29 | Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7/20 GI bearer wire for service connection mains (SD 66 PWD Elec.Data 25-26) |
| 30 | Supply,Delivery and fixing of 20mm dia GI Service Pipe including cost of all material charges and labour charges etc., complete as per Specifications (L.R) |
| 31 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender