Tender for Tender for External Electrification Works For The Newly Developed Plots In Pocket-D Of The Pandav Nagar Scheme Under The Land Monetization Scheme.
Tender Value
75.40 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
15 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
3450
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for External Electrification Works For The Newly Developed Plots In Pocket-D Of The Pandav Nagar Scheme Under The Land Monetization Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | supply installation testing and conmissioning of T/F 11/0.4 KV, 250 KVA Lavel-2 Four Star Rating. (PSR-33) |
| 2 | S/F of 11 KV TPMO set with required channel, handle switch and insulator etc. complete as per UPCCL norms.(PSR Rate) |
| 3 | S/F of 11 K.V.D.O. fuse set on pole complete as per UPCCL norms. (PSR Rate) |
| 4 | S/F of lighting arrestor for 11 KV complete with base shortd with G.I. strip of size 35x5 mm. complete in all espect as per direction of E/I. (PSR Rate) |
| 5 | S/F disc insulator (70 KN) including gun fitting. (PSR Rate) |
| 6 | S/F of 11 KV pin insulator with G.I. pin on S.T.pole or any where specified including bolts to fasten the pole cap/cross arm Comp. in all respect as per UPPCL approved makes & norms. direction of E/I |
| 7 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. complete in all respect as per direction of the Engineer-Incharge. SOR-2018/501 (t) 400 sq. mm 3-1/2 core |
| 8 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. complete in all respect as per direction of the Engineer-Incharge. SOR-2018/501 (r) 240 sq. mm 3-1/2 core |
| 9 | S/F of 185 sq mm, Three core 11KV XLPE insulated cable end joint termination kit heat shrink out door type. Complete in all respect as per direction of E/I (Airport Enclave, Bond no - 1558/S.N/ ELE/S.E/ C.E/MeDA-18 Dated: 26.02.20218) |
| 10 | Supply and Making of Maneaul Trenchless for Underground Armoured Cable (PSR) |
| 11 | Supply & Making of transformer Plinth Size 2.50x2.00x1.50mt.complete in all respect as per direction of the Engineer-Incharge. (PSR-28) |
| 12 | Supply and fixing of 2 metres high cage fabricated with 3mm thick expanded metal fixed on 50mm x 50mm x 6mm angle iron frame having vertical members spaced at 1 to 1.25 mts and horizontal members spaced at 1 mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300mm with ends forked.complete in all respect as per direction of the Engineer-Incharge. SOR-2018/1142 |
| 13 | 701 Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. |
| 14 | S/F of 3 phase marbel stone distribution piller of size 100x900x48 mm. fixed on M.S. angle iron frame of size 50x50x6 mm. suitable for 500 amp. Incoming having 6-9 no. of fuse strips out going circuit complete in all respect al per norms of UPPCL MDA-18 / 14 |
| 15 | Supply, sagging, tensioning, jointing, binding of Rabbit ASCR conductor confirming the I.S. specification including cost of binding wire, jointing sleeves, PG clamps, labour, T&p etc. required for proper completion of work as per direction of E/I. SOR/2018 627 |
| 16 | Supply, stringing & binding of over head line with G.I wire no. 4 to 8 SWG on pole including binding,labour. T&P etc required for proper completion of work as per direction of E/I. S.O.R.-18 NO.- 628 |
| 17 | Supply & Erection of hexagonal/cradle type gaurd of G.I.wire no.4 to 8 S.W.G including binding etc. complete in all respect. S.O.R.-18 NO.- 629 |
| 18 | Supply & Fixing following size arial bunch conductor (ABC) complete in all respect as per direction of the Engineer-Incharge. (V) 3x120 Sqmm + 1x95 Sqmm + 1x16 Sqmm (PSR-05) |
| 19 | Supply & Errection of 11 mt. long steel tubular pole with G.I. Bottom designated 410 SP-55 with 1/6 over all length of pole grouted in cement concrete 1:3:6 including the plinthing of pole 30 cm. above the ground level including excavation back filling etc. Rates are including all materials, labour, T & P etc. required for proper completion of work as per direction of E/I. (PSR Rate) |
| 20 | Supply & Erection of 9.0 M long steel tubular pole designated 410 SP-33 with 1/6 over all length of pole grouted in cement concrete 1:3:6 including the plinthing of pole 30 cm. above the ground level including excavation back filling etc. Rates are including all materials, labour. T&P etc. required for proper completion of work as per direction of E/I. (PSR) |
| 21 | Supply & Fixing of 100X50MM ,1.30M Long channel (7.9 KG/M) with M.S.clamp 50X6MM Comp. with Painting as per direction of E/I. |
| 22 | Supply and fixing of M.S. channel of size 75X40M.M. 2.24M Long (5.7 KG/M) with M.S.clamp 50X6MM Comp. with Painting as per direction of E/I. |
| 23 | Supply & erection of \\"D\\" clamps of 50 mm x 6 mm flat iron on steel tubular poles/ steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. |
| 24 | Supply and fixing of suspension clamp complete in all respect as per UPPCL approved makes & norms. |
| 25 | Supply and fixing of piercing connector complete in all respect as per UPPCL approved makes & norms. |
| 26 | S/F of eye/j/U type hook made of 25 mm Ms Rod With Fabrication.complete in all respect as per direction of the Engineer-Incharge. (PSR-04) |
| 27 | Supply & Fixing of Dead end clampcomplete in all respect as per direction of the Engineer-Incharge. (PSR-02) |
| 28 | Supply and fixing of 3 phase moulded type 8 ways distribution consumer box complete in all respect as per UPPCL approved makes & norms. |
| 29 | Supply & erection of stay set at least 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 cm x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm x 600 double screw tightener, 7/4.00 mm G.I stay wire etc. in 1:3:6 cement concrete complete in all respect.(SI No-630/2018) |
| 30 | Making suitable earth of S.T. pole with 2.5 mtr. long 20 mm. dia earth rod, 4 S.W.G. G.I. wire including the cost of all material, labour, T&P etc. ccomplete in all respect as per direction of the Engineer-Incharge. (PSR-29) |
| 31 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. (SI No-634/2018) |
| 32 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt Confirming to IP66 Protection complete in all respect as per direction of E/I. Cat - AAA S. No. 1422/SOR 2018 |
| 33 | Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules. S.O.R.-18 NO.- 1109 |
| 34 | S/F of HDPE (DWC) pipe 120/103.5 MM for road crossing Etc. depth of 750 mm below ground level for L.T cable and 900 mm below ground level for H.T cable carrier as per E/I. (make Dura-line or Reck) (PSR Rate) |
| 35 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. SOR-2018/504 (m) 240 sq. mm |
| 36 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. SOR-2018/504 (o) 400 sq. mm |
| 37 | Supply & Fixing of 11 KV Cable Straight heat shrinkable Through Jointing Kit (3 x 120 sq mm):- Outdoor (PRS-40) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender