Tender For Repair/Maintenance Of External Electric Supply System And Lt Overhead/Underground Distribution System Including Lightning Protection System, Repair/Maintenance Of Lt Panels, Apfc Panels And Connected Works At City Area, Alwar Under Ge Alwa
Tender Value
34 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
21 days left
EMD
68000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Of External Electric Supply System And Lt Overhead/Underground Distribution System Including Lightning Protection System, Repair/Maintenance Of Lt Panels, Apfc Panels And Connected Works At City Area, Alwar Under Ge Alwar.
BOQ
| Sl. No. | Item Description |
| 1 | Disconnecting and carefully taking down existing light fitting from high-mast tower and carrying out repairs to fitting of any type, capacity and make by replacement of defective spare parts, making the fitting fully functional and subsequently refixing, connecting, testing and commissioning the same complete all as specified and directed. Note: Spare parts shall be measured and paid separately under respective supply/replacement items. |
| 2 | S&F in replacement surge protection device (SPD) complete with potted driver suitable for 60/90 Watt LED street-light fitting, including disconnecting and taking out existing U/S SPD and driver, making necessary electrical connections, testing and commissioning complete all as specified and directed. Make: Philips/CG/Bajaj/Havells or equivalent approved. |
| 3 | S&F in replacement LED chip suitable for 60/90 Watt LED street-light fitting of any make, including taking out existing U/S LED chip, making necessary connections, testing and commissioning complete all as specified and directed. |
| 4 | S&F in replacement LED driver suitable for 20 Watt LED street-light fitting of any make, including taking out existing U/S driver, making necessary electrical connections, testing and commissioning complete all as specified and directed. |
| 5 | S&F in replacement 2.5 Sqmm PVC insulated and sheathed twin-core copper conductor cable from street-light fitting to junction box, including disconnecting and taking out existing U/S copper cable, making necessary connections, testing and commissioning complete all as specified and directed. |
| 6 | S&F in replacement 2.5 Sqmm PVC insulated and sheathed twin-core aluminium conductor cable from overhead conductor to street-light fitting, including disconnecting and taking out existing U/S aluminium cable, making necessary connections, testing and commissioning complete all as specified and directed. |
| 7 | S&F in replacement street-light bracket fabricated to required shape and angle from 40 mm dia light-grade GI tubing, length n less than 1.50 metre, suitable for mounting street-light fitting, including two Nos MS flat clamps 50 x 6 mm with bolts, nuts and washers and taking down existing U/S bracket, fixed complete all as specified and directed. |
| 8 | S&F in repairs pole-mounted SMC/PVC street-light junction box, one-piece totally enclosed, weatherproof and waterproof, front-openable type, size 300 x 200 x 100 mm, complete with 100 Amp aluminium phase and neutral busbars and one No SPN MCB 6 Amp for street light, bottom cable entry and pole mounting arrangement with MS flat clamps 25 x 3 mm including nuts and bolts, fixed, connected, tested and commissioned complete all as specified and directed. Make: Sintex or equivalent approved. |
| 9 | S&F in replacement 12 Watt LED garden/gate light fitting comprising aluminium housing, clear acrylic diffuser and cast aluminium pole cap suitable for mounting on 60 mm OD pipe, complete with all accessories, including taking down existing U/S garden/gate light, making electrical connections, testing and commissioning complete all as specified and directed. Make: Shakti Model SZPGPMX012 or equivalent approved. |
| 10 | Excavating in trenches n exc 1.50 metre wide and n exc 1.50 metre deep for laying underground cables and foundations of poles/stay assemblies, getting out in any type of soil complete all as specified and directed. |
| 11 | Returning, filling in excavated earth, including spreading, levelling, watering and well ramming in layers n exc 25 cm thick complete all as specified and directed. |
| 12 | Removing surplus excavated soil to a distance n exc 50 metres and depositing where directed at a level n exc 1.50 metres above the starting point complete all as specified and directed. |
| 13 | M&L for fly ash bricks conforming to IS 13757, old size, laid dry and flat over underground cable for protection, width equal to length of brick and abutted with gaps between adjacent bricks n exc 10 mm complete all as specified and directed. |
| 14 | M&L for dry sand cushioning to underground cable with approved quality sand, spread, levelled and punned to required thickness complete all as specified and directed. |
| 15 | M&L for light-grade GI pipe, 40 mm bore, for mechanical protection of LT cable, fixed to walls/poles and/or laid at road crossings, including bends, sockets, clamps and necessary fixing accessories and taking out existing U/S pipe complete all as specified and directed. |
| 16 | All as per preceding item but 50 mm bore complete all as specified and directed. |
| 17 | All as per preceding item but 80 mm bore complete all as specified and directed. |
| 18 | S&F, laying, jointing and testing XLPE insulated, armoured, heavy-duty LT electric cable with aluminium stranded conductor, 1100 Volt grade, 25 Sqmm, 4-core, laid in trenches/ducts, through pipes and/or fixed to poles/walls, including taking out existing U/S cable complete all as specified and directed. Note: Excavation and earthwork shall be measured and paid separately. |
| 19 | All as per preceding item but 35 Sqmm, 3.5-core complete all as specified and directed. |
| 20 | All as per preceding item but 50 Sqmm, 3.5-core complete all as specified and directed. |
| 21 | All as per preceding item but 95 Sqmm, 3.5-core complete all as specified and directed. |
| 22 | All as per preceding item but 120 Sqmm, 3.5-core complete all as specified and directed. |
| 23 | S&F in replacement globe-shaped light/diffuser for existing garden light, frosted finish, made of polycarbonate and suitable for 9/10 Watt LED lamp, including taking out existing U/S globe, fixed complete all as specified and directed. |
| 24 | S&F in replacement globe-shaped post-top gate-light lantern in frosted polycarbonate, suitable for retrofit LED lamp up to 27 Watt, including taking down existing U/S globe, fixed complete all as specified and directed. Make: Havells Model LHDC13126099 or equivalent approved. |
| 25 | S&F in replacement steel tubular swaged pole, 9 metre long, Type 410 SP-31, including two coats synthetic enamel paint in alternate black and yellow strips of 300 mm each up to 1.20 metre height above PCC coping/pedestal and two coats aluminium paint over one coat aluminium red oxide primer to remaining portion, marking pole number and dismantling/taking down existing U/S 9 metre long prestressed concrete pole complete all as specified and directed. Note: Excavation, earthwork, PCC foundation and coping shall be measured and paid separately. |
| 26 | S&F in replacement 120 Watt LED flood-light fitting, IP65, pressure die-cast aluminium housing, high-power COB LED light source, complete with integral driver, mounting accessories and internal wiring, including taking out existing U/S flood-light fitting, fixing, connecting, testing and commissioning complete all as specified and directed. Make: Havells JETA PRO PLUS Cat Part No. JETAPROPLUSFL120WLED757LTG or equivalent approved from CG/Bajaj/Wipro/Philips. |
| 27 | M&L for PCC 1:3:6 Type C-2 using 40 mm graded stone aggregate as mass concrete in foundations of poles complete all as specified and directed. |
| 28 | M&L for PCC 1:2:4 Type B-2 using 20 mm graded stone aggregate as coping concrete to poles complete all as specified and directed. |
| 29 | M&L for preparation of existing steel tubular poles/cross arms/clamps and similar steel surfaces by cleaning with wire brush and applying two coats of aluminium paint complete all as specified and directed. |
| 30 | M&L for preparation of steel surfaces/cross arms/clamps and similar steel components fixed on existing PCC poles by cleaning with wire brush and applying two coats of aluminium paint complete all as specified and directed. |
| 31 | M&L for preparation and painting of existing PCC poles up to 1.50 metre height in alternate yellow and black colour-code bands of 300 mm width with two coats of approved paint, including marking pole numbers complete all as specified and directed. |
| 32 | S&F, installing, testing and commissioning (in replacement) outdoor weatherproof busbar chamber, size 600 x 450 x 450 mm, fabricated from 3.15 mm thick MS sheet, having two-side openable hinged doors with locking arrangement and two Nos 600 mm long angle-iron legs 50 x 50 x 6 mm, complete with four Nos aluminium busbars of 200 Amp capacity, incoming 100 Amp, 25 kA, 4-pole, 415 Volt adjustable thermal-magnetic MCCB, one set indicating lamps, digital voltmeter 0–500 Volt with selector switch, digital ammeter 0–500 Amp with selector switch, one No outgoing MCCB 4-pole 63 Amp, 440 Volt, 25 kA and space with MCB channel for 20 Nos SPN MCBs, including PCC 1:3:6 Type C-2 foundation, two coats approved synthetic enamel paint over one coat primer, cable glands, lugs/thimbles, internal connections, earthing, testing and commissioning complete all as specified and directed. |
| 33 | S&F in replacement 9 Watt LED bamboo-type garden-light fitting complete with LED lamp, necessary fixing accessories, nuts, bolts and PCC work for mounting, including taking down existing U/S light fitting of any type/size, making electrical connections, testing and commissioning complete all as specified and directed. Make: Havells Cat No. LHEVBDP71N6K008 or equivalent approved. |
| 34 | S&F in replacement MCCB, 4-pole, 400 Amp, 415 Volt, 50 Hz AC, adjustable thermal and magnetic release type, breaking capacity 36 kA, including disconnecting and taking down existing U/S MCCB, making necessary electrical connections, testing and commissioning complete all as specified and directed. |
| 35 | All as per preceding item but 250 Amp complete all as specified and directed. |
| 36 | All as per preceding item but 160 Amp complete all as specified and directed. |
| 37 | M&L for earthing to electrical equipment/panel complete with galvanised MS earth plate electrode 600 x 600 x 6.30 mm thick, buried vertically n less than 2.25 metres below ground level with top edge n less than 1.50 metres below ground level, surrounded by charcoal dust and salt to packed thickness n less than 150 mm on all sides, including 32 x 6 mm galvanised MS earth strip as earth lead welded to electrode and connected to equipment/panel/test point, earth strip protected in 40 mm bore light-grade GI pipe up to 3.00 metres above ground level, 25 x 3 mm MS flat clamps, 20 mm bore medium-grade GI watering pipe with MS funnel and wire mesh, PCC 1:3:6 Type C-1 chamber and 75 mm thick RCC 1:2:4 Type B-1 cover on CI frame, excavation in any type of soil, returning, filling in, removal of surplus soil n exc 50 metres, dismantling and taking out existing U/S earthing, making connections, testing earth resistance and commissioning complete all as shown on Electrical Plate No. 3 of SSR Part-I, specified and directed. |
| 38 | M&L for surface dressing n exc 15 cm deep in soft/loose soil, including site clearance, cutting/removal of plants and bushes, filling pits/trenches with soil, dressing and levelling surface, removal of surplus/waste material outside fencing area and cleaning pump-house premises complete all as specified and directed. |
| 39 | Cutting/trimming tree branches around LT/HT overhead lines to maintain minimum 3.00 metre clearance all around from external conductors, including collection, removal and depositing cut branches/material at locations within Cantt area as directed complete all as specified and directed. Note: Approximate span length shall be 30–40 metres. |
| 40 | S&F, installing, testing and commissioning (in replacement) 90 Watt high-intensity LED street-light fitting, pressure die-cast aluminium housing, IP65/IP66 roadway luminaire, high-power LED light source, minimum lumen output 10,000 lumens, complete with two lenses, integral driver, internal wiring, mounting accessories and electrical connections complete all as specified and directed. Make: Syska Model SSK-SLR-90W or equivalent approved from Havells/Shakti/C&S. |
| 41 | S&F, installing, testing and commissioning (in replacement) 25 Watt high-intensity LED street-light fitting, pressure die-cast aluminium housing, IP65/IP66 roadway luminaire with high-power LED light source, minimum lumen output 2100 lumens, complete with integral driver, internal wiring, mounting accessories and electrical connections complete all as specified and directed. |
| 42 | S&F, laying, jointing and testing (in replacement) XLPE/PVC insulated, armoured, heavy-duty electric cable with copper conductor, 1100 Volt grade, 25 Sqmm, 4-core, complete all as specified and directed. |
| 43 | M&L for 1.1 kV grade straight-through heat-shrinkable cable jointing kit suitable for 3.5/4-core XLPE armoured aluminium conductor cable of size 25–50 Sqmm, complete with all jointing material and accessories, including necessary excavation and earthwork, jointed and tested complete all as specified and directed. Make: Denson/Raychem or equivalent approved. |
| 44 | All as per preceding item but suitable for 3.5/4-core XLPE armoured aluminium conductor cable of size 70–150 Sqmm complete all as specified and directed. |
| 45 | Boring holes below road, pavement and hardstanding by trenchless technology using suitable machinery, including providing and laying 200 mm dia HDPE pipe suitable for 0.40 MPa working pressure, complete all as specified and directed. |
| 46 | M&L in replacement for medium-grade galvanised steel water tubing, 80 mm bore, including all necessary fittings, laid in trenches, jointed, tested and complete all as specified and directed. |
| 47 | All as per preceding item but 100 mm bore complete all as specified and directed. |
| 48 | S&F, installing, testing and commissioning (in replacement) factory-made floor-mounted outdoor cubicle-type LT feeder panel, size 1200 x 1000 x 500 mm, suitable for 415 Volt, 3-phase, 4-wire, 50 Hz AC supply, fabricated from 3.2 mm thick CRCA MS sheet, dust/weather/vermin proof, IP65 protected, powder-coated externally and suitably treated/painted internally, complete with detachable gland plate, cable glands, aluminium busbars mounted on epoxy insulators, internal wiring with PVC insulated solid copper conductor cables conforming to IS 694, 1100 Volt grade and n less than 2.5 Sqmm, conforming to IEC 61439-1 & 2/applicable IS, CPRI type tested/tested as applicable and routine tested at manufacturer’s works complete with test certificates, including grouting 450 mm above ground level on 900 mm long angle-iron frame 50 x 50 x 6 mm embedded in PCC 1:2:4 Type B-1, complete with internal interconnections, ferruling, terminal blocks, earthing and all accessories, comprising: Incoming—one No 630 Amp, 4-pole, 36 kA adjustable thermal-magnetic MCCB; one No digital combined ammeter/voltmeter 10/0–400/500 A/V; four Nos 800 Amp aluminium busbars with insulators; instrument control fuses and RYB indication lamps. Outgoing—one No 500 Amp, 3-pole, 36 kA adjustable thermal-magnetic MCCB with space for one additional MCCB; three Nos 100 Amp, 3-pole, 25 kA MCCBs; and one No 80 Amp, 3-pole, 25 kA MCCB, fixed, connected, tested and commissioned complete all as specified and directed. |
| 49 | All as per preceding LT feeder panel item but comprising: Incoming—one No 250 Amp, 4-pole, 36 kA adjustable thermal-magnetic MCCB; one No digital combined ammeter/voltmeter 10/0–400/500 A/V; four Nos 400 Amp aluminium busbars with insulators; instrument control fuses and RYB indication lamps. Outgoing—two Nos 160 Amp, 3-pole, 25 kA MCCBs and four Nos 100 Amp, 3-pole, 25 kA MCCBs, complete all as specified and directed. |
| 50 | All as per preceding LT feeder panel item but comprising: Incoming—one No 400 Amp, 4-pole, 36 kA adjustable thermal-magnetic MCCB; one No digital combined ammeter/voltmeter 10/0–400/500 A/V; four Nos 600 Amp aluminium busbars with insulators; instrument control fuses and RYB indication lamps. Outgoing—one No 250 Amp, 3-pole, 36 kA MCCB, two Nos 160 Amp, 3-pole, 25 kA MCCBs and four Nos 100 Amp, 3-pole, 25 kA MCCBs, complete all as specified and directed. |
| 51 | S&F 20 Watt emergency LED inverter bulb, B-22 type, with inbuilt lithium battery having backup n less than 4 hours, deep-discharge protection, fast charging and minimum two-year warranty, complete all as specified and directed. Make: Philips/Havells/Halonix or equivalent approved. |
| 52 | S&F 10–12 Watt emergency LED inverter bulb, B-22 type, with inbuilt lithium battery having backup n less than 4 hours, deep-discharge protection, fast charging and minimum two-year warranty, complete all as specified and directed. Make: Philips/Havells/Halonix/Shakti or equivalent approved. |
| 53 | S&F, installing, testing and commissioning in replacement lithium-battery-based solar LED security-light system with built-in battery, PV panel and LED luminaire in FRP/aluminium housing, including taking down existing U/S light fitting of any size/capacity, comprising 30 Watt monocrystalline PV panel; 15.4 Ah lithium battery with inbuilt BMS; 16 Watt high-brightness white LED lamp, CCT 6500K and CRI as specified; microcontroller-based charge controller-cum-driver with automatic dimming and dusk-to-dawn operation; operating temperature -10°C to +55°C; and adjustable MS mounting clamp with 40 mm dia arm suitable for pole/wall mounting, including all wiring, connections and accessories, fixed, tested and commissioned complete all as specified and directed. |
| 54 | S&F in replacement decorative tri-colour pole light, 3.00 metre high, comprising GI PU-painted pole and polycarbonate/acrylic light assembly, rated 75 Watt ±10%, 240 Volt, power factor >0.90 and driver efficiency ≥80%, providing saffron, white and green illumination in sequence, complete with 300 mm dia x 12 mm thick base plate having 260 mm PCD and 25 mm dia holes, foundation bolts and PCC pedestal/foundation, including erection, electrical connections, testing and commissioning complete all as specified and directed. Make: Halonix Cat Part No. HLDC-45-75-TRI-3M/Havells/Bajaj/Crompton or equivalent approved. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender