Tender For Provn Of Toilet Block At 60 Coy Asc/Ncc Directorate , Provn Of Iron Grill/Bars With Bricks Works Near Parade Ground Of Aoc Centre And Upgradation Of Slab In Kitchen From Kadapa Stone To Granite Slab With End Connected Items In Residential
Tender Value
41.28 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
12 days left
EMD
82600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Toilet Block At 60 Coy Asc/Ncc Directorate , Provn Of Iron Grill/Bars With Bricks Works Near Parade Ground Of Aoc Centre And Upgradation Of Slab In Kitchen From Kadapa Stone To Granite Slab With End Connected Items In Residential Qtr At Dgqa Complex Under Age Br (S) No-Ii Of Ge (S) Secbad
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation for all kind of soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. complete all as specified and as directed. |
| 2 | M & L for Cement concrete type D 2 1:4:8 (40 mm graded aggregate) in foundation filling and mass concrete complete all as specified and as directed. |
| 3 | M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in, built in CM (1:6) complete all as specified and as directed. |
| 4 | M & L for Providing, cement concrete in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed) complete all as specified and as directed. |
| 5 | S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hangingdoor fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 6 | Returning filling in including spreading, levelling watering and well ramming in layers not exc 25cm thick complete all as specified and as directed. |
| 7 | Rendering 15mm thick in (2 coats) (10mm thick 1:6 and 5mm thick 1:4 on top) finished even and fair without using extra cement complete all as specified and as directed. |
| 8 | M & L for painting to cement plaster surfaces with two coat of Cement base paint over a coat of alkali resistant primer after preparation of surface complete all as specified and as directed. |
| 9 | M & L for preparation of new steel surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of zinc chrome primer. complete all as specified and as directed. |
| 10 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out Soft/ loose soil complete all as specified and as directed. |
| 11 | Spreading and levelling excavated soil in layers n exc. 25 cm thick in floor area. complete all as specified and as directed. |
| 12 | M & L for Nominal mix reinforced cement concrete 1:2:4 type B1 (20mm graded) in Foundations including rafts, footings, foundation, plinth beams, bases for columns, etc: basement slabs, underreamed piles and mass concrete (nominal mix) complete all as specified and as directed. |
| 13 | M & L for nominal mix RCC 1:2:4 type B1 (20 mm graded aggregate)as in beams bends etc. using 20mm graded crushed stone aggregate all as specified. |
| 14 | M & L for nominal mix RCC 1:2:4 type B1 (20 mm graded aggregate) as in columns, pillars,posts and struts using 20mm graded crushed stone aggregate complete all as specified and as directed. |
| 15 | M & L for nominal mix RCC 1:2:4 type B1 (20 mm graded aggregate)Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 16 | M & L for precast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) as in cover slab of manholes, septic tank etc, set in cement mortar (1:4) including necessary form, moulds etc and including taking out/removal of existing unserviceable cover slab from manholes /septic tank complete all as specified and as directed..(Note :- Reinforcement shall be measured and paid separately) |
| 17 | M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and bending with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality confirming to IS:1786 complete all as specified and as directed. |
| 18 | M & L for mild steel TMT bars 5 to 10 mm dia and over and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking beinding spirally hopping and binding wisth and including mild steel wire (annelid not less than 0.9mm dia) as in stirrups etc.complete all as specified and as directed. |
| 19 | M & L for brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 20 | M & L for half brick work with sub class B bricks burnt straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and as directed. |
| 21 | Formwork to sides of concrete foundation, footings, bases of columns, raft & raft beams, sides and soffits (if any) of foundation & plinth beams and similar work, vertical or to batter- Rough finished surface of concrete : Flat complete all as specified and as directed. |
| 22 | Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floor & beams etc:- rough finished surface of concrete:- Flat complete all as specified and as directed. |
| 23 | Formwork to the sides of the pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. |
| 24 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work with fair finished; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 25 | S & F Powder coated Aluminium anodized frame work for door / windows / ventilators with one or more rebates including joining heat for fixing etc complete all as specified and as directed. |
| 26 | S & F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 27 | S & F for sheet glass ordinary quality 4 mm thick fitted with beading/putty n.exc 0.5 sqm each with wooden/steel/aluminium beads, sheet glass is ground or obscured or frosted and fixed complete all as specified and as directed. |
| 28 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed in panels of joineries with stainless steel wire staples complete all as specified and as directed. |
| 29 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum oxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). complete all as specified and as directed. |
| 30 | S & F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 31 | S & F stainless stell 100mm butt hinges medium weight cold rolled complete all as specified and as directed. |
| 32 | S & F Aluminium anodised barrel tower bolts 125mm of extrded section complete all as specified & directed. |
| 33 | S & F , 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 34 | S & F 300mm long aluminium alloy anodised sliding door bolts, with haps and staples (bolt type) and fixing clips of sheet, cast oions or cast aluminium alloy and fixed. with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed |
| 35 | M & L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm(300x300x7mm),over 15mm thick screed bed in CM 1:6 . set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed. |
| 36 | M & L for glazed ceramic coloured tiles of size 300x450x7mm thick in vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick rendering in CM 1:3 complete all as specified and as directed. |
| 37 | M & L for rendering 10mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6 complete all as specified and as directed. |
| 38 | M & L for rendering 15mm thick on other then fair faces of brick or concrete surfaces of wall in CM 1:4 complete all as specified and as directed. |
| 39 | M & L for rendering 5mm thick on brick or concrete surfaces of wall in CM 1:3 complete all as specified and as directed. |
| 40 | M & L for applying three coat of white wash on walls including preparation new plastered wall surfaces complete all as specified and as directed. |
| 41 | M & L for applying three coat of white wash on Ceiling including preparation new plastered wall surfaces complete all as specified and as directed. |
| 42 | M & L for two coats of cement base paint over a coat of primer including preparation of newly plastered surfaces of wall complete all as specified and as directed. |
| 43 | S & F vitreous china wash down water closet (pedestal pattern) any colour with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity,flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mm size with PTMT nuts of length 450mm and Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including complete all as specified and as directed. |
| 44 | S & F Vitreous china Squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and as directed. |
| 45 | S & F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and as directed. |
| 46 | S & F Vitreous China Urinal, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with 60 mm long brass screws, pointing around urinal back in cement, including all fittings cistern, brackets, flush pipe, spreader, push tap, waste coupling, grating, etc complete all as specified and as directed. |
| 47 | S & F Vitreous china urinal partition white of size 310x700 mm terminating about 40 cm above floor line complete all as specified and directed |
| 48 | S & F tubular towel rail brass chromium plated 20mm dia D type 60 cm, between the flangers complete all as specified and as directed. |
| 49 | S& F 2 Way Bib Tap with Wall Flange complete with and including all fixing accessories complete all as specified and as directed |
| 50 | S & F stop valve15mm bore cast copper alloy fancy type chromium plated with long shank and cup(concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specified and as directed. |
| 51 | S & F 15mm bore pillar taps brass chromium plated, screwed down, high pressure with or wihtout lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe, complete all as specified and as directed. |
| 52 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, WHB and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete over 20mm screed in CM 1:4 including cutting of slab for fixing of WHB complete all as specified and as directed |
| 53 | Providing and fixing soap dish, vitreous china white, approximate size 160x160x90mm. complete all as specified and as directed. |
| 54 | S & F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement complete all as specified and as directed. |
| 55 | S & F 100mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof complete all as specified and as directed. |
| 56 | S & F PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified and as directed. |
| 57 | S & F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 58 | S & F 75 mm bore. PVC (SWR) bends complete all as specified and as directed. |
| 59 | S & F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed. |
| 60 | S & F 110mm bore PVC (SWR) bends with oval access door complete all as specified and as directed. |
| 61 | S & F 110 mm PVC (SWR) bend any radius complete all as specified and as directed. |
| 62 | S & F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door complete all as specified and as directed. |
| 63 | M & L for cutting into existing manholes for connecting new drain, making good to pipe rendering, cutting out existing benching for and forming branch channel(1/2 round and 3/4 secton) in cement concrete (1:2:4) type B-1 smooth finished and reforming bencing as required for 150mm dia complete all as specified to directed. |
| 64 | S & F 20 mm dia Ball valves ,high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 65 | S & F rotational moulded polyethylene water storage tank consisting of three laver cylindrical vertical with top closed hoisted and fixed in position all as specified and directed capacity 1000 ltrs. complete all as specified and as directed. |
| 66 | S & F 25 mm bore CPVC pipes SDR 11 pipes & Plain CPVC SDR 11 fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed |
| 67 | S & F of CPVC pipes 20 mm dya SDR 11 & plian CPVC SDR 11 fittings in wall /ceiling or laying in floors complete all as specified and as directed. |
| 68 | S & F for PVC (SWR) gully trap of 125/110mm dia set and jointing with solvent cement complete all as specified and as directed. |
| 69 | S & F counter top wash basin of size 505 mm x 435 mm x 180 mm (Model No. KUS-WHT-35601 of Make \\"JAQUAR\\" or equivqlent with and including fixing old fitting complete as specified and as directed |
| 70 | M & L for Plain Cement concrete type B-1, 1:3:6(40mm graded aggregate) Laid in plinth protection including Grade B joint filling as specified and directed |
| 71 | M & L for rendering 15mm thick on concret or fair faces of brick work in CM 1:4 finished even and smooth without using extra cement, using water proofing compund at the rate of 3% weight of cement over concrete surfaces and complete all as specified and as directed.Note : Water proofing compound shall be measured and paid seperately. |
| 72 | M & L for priming the plastered roof surfaces with bitumenous primer @ 0.30 kg over applying hot bitumen VG-30 @1.2kg/Sqm and applying APP based polymeric membrane weighing 3 kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/per sqm) and on primed surface by forced torch application over that applying bitumen base alluminium Paint @ 0.2 Kg/Sqm complete all as spescified all as specified and as directed. |
| 73 | Supply only water proofing compund complete all as specified and as directed. |
| 74 | S & F 6mm thick bevelled egge mirror on wall using new 04 nos screws of suitable size complete all as specified and directed |
| 75 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar.complete all as specified and as directed |
| 76 | M & L Granite(of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platorms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including 15mm thick screed bed and incl its dismantling complete all as specified and as directed. |
| 77 | Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 78 | S & F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and as directed. |
| 79 | M & L for Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) laid in base, mass concrete complete all as specified and directed |
| 80 | M & L for for two coat of synthetic enamel paint over a coat of red oxide zinc chrome on new surfaces of any description complete all as specified and as directed. |
| 81 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard dense soil complete all as specified and as directed.. |
| 82 | M & L for Pre-cast cement concrete Type C1 1:3:6 block masonry with solid blocks, exc. 10 cm in width built in cemrent mortar 1:4 complete all as specified and as directed. |
| 83 | M & L for rendering to brick masonry or stone surfaces 15mm thick in cement mortar 1:4, to be finished even and smooth (without using extra cement complete all as specified and directed |
| 84 | M & L for rendering to brick masonry or stone surfaces 10mm thick in cement mortar 1:6, to be finished even and smooth (without using extra cement complete all as specified and directed |
| 85 | M & L for Coloured glazed ceramic tiles of sizes 300m x 450 mm X 7 mm thick jointed in neat cement slurry, laid over including 10 mm thick rendering coat/backing layer in CM (1:4) and pointed in white or coloured cement to match the shade of tile as in vertical surfaces such as dado/skirting complete all as specified and as direcetd. |
| 86 | M & L for applying three coats of white wash on wall including perpartion of new plastered surfaces complete all as specified and directed |
| 87 | M & L 25mm thick Plain Cement concrete type B-0, 1:2:4 (12mm graded aggregate) Laid in sub flooring complete all as specified and as directed. |
| 88 | M & L for for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as direcetd. |
| 89 | M & L for precast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), sting ourses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etcset in CM 1:6. including all necessary form work etc complete all as specified and as directed |
| 90 | M & L for Mild steel TMT bars 6 mm to 8 mm dia and ., cut to length, bent to shape required including crancking , bendding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as speified and as directed . |
| 91 | Supplying and laying 20mm bore of CPVC pipes with SDR 13.5 pipes & plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors etc. in repairs including concealed piping after cutting in brick work/ stone masonry walls where ever required complete all as specified and as directed. |
| 92 | All as per item No.93 above but 25mm bore. complete all as specified and as directed. |
| 93 | S & F 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position complete all as specified and as directed. |
| 94 | S & F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) complete all as specified and as directed. |
| 95 | S & F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe complete all as specified and as directed. |
| 96 | S & F for vitreous china, half stall urinal white with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) incl. providing and fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed |
| 97 | S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed. |
| 98 | S & F Vitreous China Urinal, Squatting plate, white (excluding flushing cistern, flush pipe and waste pipe with grating and union for discharge pipe incl urinal spreader and waste pipe )but incl urinal spreader complete as specified and as directed. |
| 99 | S & F in repair WHB vitreous china (flat back or angle back type ) any size ,including cutting for pinning in ends size 550x400 mm including brackets ,out let pipe ,coupling ,connection pipe 450mm and CP piller taps complete all as specified and as directed. |
| 100 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 101 | S & F angle valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 102 | S & F Tubular towel rail, 20mmdia, D type, 60cm long between flanges complete all as specified and as directed. |
| 103 | S & F in 15 mm bore fancy type long body Bib tap crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as direcetd. |
| 104 | S & F in repair 2 Way Bib Tap with Wall Flange complete with and including all fixing accessories all as specified and as directed |
| 105 | S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 106 | S & F Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) and fixed in repairs complete all as specified and as directed. |
| 107 | S & F solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube S & F in opening as per specification complete all as specified and as directed |
| 108 | S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed |
| 109 | S & F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for PVC door frame complete all as specified and as directed. |
| 110 | S & F 150 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed |
| 111 | S & F 125 mm size extruded aluminium door handles fabricated type complete all as specified and as directed |
| 112 | S & F ing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame andmullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all (Glass shall be paidseparately). complete all as specified and as directed. |
| 113 | S & F 5.5mm thick plain sheet glass glazing any size with rubber packing where ever required complete all as specified and as directed. |
| 114 | Removing excavated soil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed. |
| 115 | Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out hard/dense soil complete all as specified and directed. |
| 116 | M & L for broken stone boulder Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 117 | M & L for 75mm thick PCC 1:3:6 type D-2 (using 40mm graded crushed stone aggregate) as in sub base. complete all as specified and as directed. |
| 118 | M & L for rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry with grey cement and pigments in floors over a15mm thick screed bed in CM 1:4. complete all as specified and as directed. |
| 119 | Removing excavated materials (soil) to a distance exc 250 m and n.exc.500 m and depositing where directed at a level. N.exc. 1.5mtr above the starting point complete all as specified and as directed. |
| 120 | M & L for two coat of synthetic enamel paint over a coat of primer including preparation newly concrete surfaces over 10 cm width or girth complete all as specified and as directed. |
| 121 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 122 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 123 | Excavation in post holes each n.exc 0.50 cum getting out. Returning filling in layers n.exc 25cm etc removal at surplus soil to a distance n.exc 50 mt and making good surface in hard/ dense soil complete all as specified and as directed. |
| 124 | S & F Steel work as in tubular / L post, trusses,plates, purlins including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St 240 complete all as specified and as directed. |
| 125 | M & L 100mm thick PCC 1:3:6 type D-2 (using 40mm graded crushed stone aggregate) as in sub base. complete all as specified and as directed. |
| 126 | M & L for rubber moulded Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in near cement slurry with grey cement and no pigments in floors over a 20mm thick screed bed in CM 1:4. complete all as specified and as directed. |
| 127 | M & L for PCC type B1 1:2:4 (20mm graded aggregate) as in copings, plinth courses, bed plates, kerbs incl necessary formwork etc complete all as specified and as directed. |
| 128 | M & L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 150mm dia pipe. complete all as specified and as directed. |
| 129 | M & L for SWG drain pipes grade 'A' of 150mm internal dia laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed. |
| 130 | M & L for rendering 15mm thick on concrete or brick work in CM 1:4 finished even and smooth without using extra cement complete all as directed and as specified. |
| 131 | M & L for pre-cast reinforcement cement concrete (1:2:4) Type B-1, using 20 mm graded crushed stone aggregate as in cover slab for manholes etc.and set in cm 1:6 complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 132 | M & L for pre-cast reinforcement cement concrete (1:2:4) Type B-1, using 20 mm graded crushed stone aggregate as in cover slab for manholes etc.and set in cm 1:6 complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender