Tender For Special Repairs To Married Accommodation Bldg No. P-585/01 To P-585/08 At Zorawar Marg Of Med Regt At Mil Stn Alwar.
Tender Value
42.82 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
20 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Married Accommodation Bldg No. P-585/01 To P-585/08 At Zorawar Marg Of Med Regt At Mil Stn Alwar.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for demolition of brickwork or stone/boulder masonry built in cement mortar, including quoins, arches, pillars and precast concrete masonry, getting out materials, sorting and stacking serviceable materials and removing unserviceable materials, complete all as specified and directed. |
| 2 | M&L for brickwork with sub-class ‘B’ bricks, straight or curved on plan to any radius, as in half-brick thick walls, built in cement mortar 1:4, complete all as specified and directed. |
| 3 | M&L for brickwork with sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 4 | M&L for taking down cement or cement-lime plaster of any description from brick or stone walls, including raking out joints, hacking for key and scrubbing down with water, complete all as specified and directed. |
| 5 | M&L for rendering 15 mm thick in cement mortar 1:4 mixed with approved waterproofing compound @ 3% by weight of cement on brick/stone masonry surfaces, finished even and smooth without using extra cement, including scaffolding and work at any height/location, complete all as specified and directed. |
| 6 | M&L for cement plaster 10 mm thick in cement mortar 1:6 on surfaces other than fair faces of brickwork or concrete, finished even and smooth without using extra cement, complete all as specified and directed. |
| 7 | M&L for rendering 5 mm thick in cement mortar 1:3 as on ceilings, finished even and smooth without using extra cement, complete all as specified and directed. |
| 8 | M&L for rough-cast plaster to external walls comprising undercoat of cement mortar 1:3 n less than 10 mm thick and, while in plastic state, applying rough-cast mixture consisting of crushed stone/fine gravel aggregate 6 mm to 12 mm mixed with coarse sand and cement in proportion 1:1:1, finished even, including preparation of surface and applying two coats of approved exterior emulsion/weatherproof paint, complete all as specified and directed. |
| 9 | M&L for preparing newly plastered wall surfaces and applying two coats of oil-bound distemper of approved shade/tint over and including one coat of suitable primer and 2 mm thick approved elastomeric wall-care putty, complete all as specified and directed. |
| 10 | M&L for preparing old plastered wall surfaces including removal of mortar droppings, smoke, soot, mould, moss, efflorescent salts, oil/grease spots and other foreign matter by mechanical grinding/approved means and applying two coats of oil-bound distemper of approved shade/tint over and including 2 mm thick approved wall-care putty and one coat of suitable primer, complete all as specified and directed. |
| 11 | M&L for preparing newly plastered surfaces of ceilings and applying three coats of whitewash, complete all as specified and directed. |
| 12 | M&L for preparing old plastered surfaces of ceilings and applying two coats of whitewash, complete all as specified and directed. |
| 13 | M&L for preparing newly plastered external wall surfaces and applying two coats of approved exterior emulsion paint over and including 2 mm thick exterior-grade wall-care putty, complete all as specified and directed. |
| 14 | M&L for preparing old plastered external wall surfaces and applying two or more coats of approved exterior-grade weatherproof emulsion paint over and including 3 mm thick exterior-grade wall-care putty and one coat of approved exterior primer, at any height up to fourth-storey level, complete all as specified and directed. |
| 15 | M&L for dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, sorting and removing serviceable tiles to store and removing rubbish off the premises, complete all as specified and directed. |
| 16 | M&L for first-quality coloured glazed ceramic tiles, 300 x 600 x 7 mm thick, as on vertical surfaces, laid over and including 10 mm thick rendering in cement mortar 1:3, set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tiles, complete all as specified and directed. |
| 17 | M&L for coloured non-skid ceramic tiles 7 mm to 8 mm thick, square/rectangular, area of each tile exc 0.06 Sqm but n exc 0.11 Sqm, as in floors, laid over and including 10 mm thick bedding/rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white/coloured cement to match the shade of tiles, complete all as specified and directed. |
| 18 | M&L for polished coloured vitrified tiles 8 mm to 10 mm thick, square/rectangular, area of each tile n exc 0.36 Sqm, as in floors, set and jointed in neat cement slurry and pointed with white/coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 19 | All as per preceding vitrified tile item but as in skirting/dado, laid over and including 10 mm thick cement mortar 1:4 backing, complete all as specified and directed. |
| 20 | M&L for PCC 1:2:4 Type B-0 using 12.5 mm graded aggregate, 25 mm thick, as in sub-base/levelling course to floors, including demolition of existing defective sub-base where required and finishing surface fair and even, complete all as specified and directed. |
| 21 | M&L for demolition of stone slabs and tiles of any description or thickness in floors, aprons and similar locations, laid, bedded and pointed in any mortar, including getting out, sorting and stacking serviceable material and removing unserviceable material, complete all as specified and directed. |
| 22 | M&L for 18 mm to 20 mm thick granite of approved type, shade and pattern, table-rubbed and polished, as in steps, jambs, pillars, window cills, cooking platforms and similar locations, set in cement mortar 1:4 over and including 15 mm thick screed/bedding in cement mortar 1:3, jointed and pointed in white cement 1:2 using marble dust and matching pigment, including cutting, grinding and polishing edges to curved profile and forming holes for LPG gas pipeline wherever required, complete all as specified and directed. |
| 23 | M&L for taking down chowkats/frames together with shutters without taking shutters off the frames, area n exc 1.50 Sqm each, including making good disturbed surfaces, complete all as specified and directed. |
| 24 | M&L for taking down chowkats/frames together with shutters without taking shutters off the frames, area exc 1.50 Sqm but n exc 4.00 Sqm each, including making good disturbed surfaces, complete all as specified and directed. |
| 25 | M&L for taking down shutters, area exc 1.00 Sqm but n exc 2.00 Sqm each, complete all as specified and directed. |
| 26 | S&F factory-made single-extruded WPC solid decorative flush door shutter, 30 mm thick, manufactured from virgin polymer of K-value 58–60, calcium carbonate, natural fibres and non-toxic additives, minimum density 650 Kg/Cum, screw withdrawal strength n less than 1800 N on face and 900 N on edge, minimum compressive strength 50 N/Sqmm and modulus of elasticity 850 N/Sqmm, Class-A resistance to spread of flame and termite/borer, water/moisture resistant and fire-retardant properties, laminated on both faces with approved PVC foil n less than 14 micron thick using hot-melt adhesive, including three SS butt hinges to each shutter with full-body threaded star-headed countersunk SS screws, complete all as specified and directed. |
| 27 | S&F factory-made single-extruded WPC solid door/window/clerestory-window frame/chowkat, section 45 x 70 mm, manufactured from virgin PVC polymer of K-value 58–60, calcium carbonate, natural fibres and non-toxic additives, minimum density 750 Kg/Cum, screw withdrawal strength n less than 2200 N on face and 1100 N on edge, minimum compressive strength 58 N/Sqmm and modulus of elasticity 900 N/Sqmm, Class-A resistance to spread of flame and termite/borer, water/moisture resistant and fire-retardant properties, fabricated with mitred joints using PVC solvent cement and SS screws, fixed in position with MS holdfasts/lugs or SS dash fasteners, including cutting holes and making good disturbed surfaces, complete all as specified and directed. |
| 28 | S&F powder-coated aluminium window comprising glazed shutter and fly-proof shutter, fabricated from aluminium sections 1.59 mm thick with powder coating n less than 50 micron, including necessary jointing cleats, glazing clips, neoprene/rubber packing, 4 mm thick glass, galvanised MS wire cloth 0.56 mm nominal wire dia with average aperture 1.18 mm, aluminium handles, hinges, tower bolts and 12 mm square MS guard-bar grill with flat-iron frame fixed to aluminium frame/wall, including making good disturbed surfaces, complete all as specified and directed. Outer main frame shall be 125 x 25 x 1.59 mm and shutter frame 44 x 25 x 1.59 mm. Overall opening shall be measured for payment. |
| 29 | S&F powder-coated aluminium frame of approved colour, powder coating n less than 50 micron thick, for doors, windows, partitions and ventilators, with one or more rebates, including jointing cleats and necessary fixing accessories, fixed complete all as specified and directed. |
| 30 | S&F stainless-steel wire cloth having 0.36 mm nominal dia wire and average aperture 1.40 mm, fixed to wooden/steel/aluminium frames with tinned tacks/galvanised staples and beading, complete all as specified and directed. |
| 31 | S&F ordinary-quality sheet glass 4.80 mm thick, size of individual pane n exc 2 Sqm, fixed with rubber beading and clips, complete all as specified and directed. |
| 32 | S&F anodised aluminium alloy sliding door bolt with hasp and staple, bolt type, 300 mm long and n less than 12 mm dia, including minimum six bolts and nuts, fixing clips, plates and all necessary fittings, fixed complete all as specified and directed. |
| 33 | S&F anodised aluminium barrel tower bolt of extruded section, 150 mm long, fixed complete all as specified and directed. |
| 34 | S&F extruded aluminium alloy handle, 125 mm long, fabricated type, anodised and ISI marked, fixed complete all as specified and directed. |
| 35 | S&F stainless-steel barrel tower bolt, 200 mm long, stove-enamelled black with bright bolt, fixed complete all as specified and directed. |
| 36 | S&F stainless-steel oval-type handle, 150 mm long, stove-enamelled black, fixed complete all as specified and directed. |
| 37 | S&F MS ordinary rat-tail rod-pattern door spring, 300 mm size, including roller, roller plate and screws/welding as required, fixed complete all as specified and directed. |
| 38 | S&F aluminium alloy floor door stopper, 140 mm long, comprising body and tongue, anodised, with hard-drawn steel spring and vulcanised rubber piece, fixed to floor complete all as specified and directed. |
| 39 | M&L for pressed-steel shutter fabricated from 1.00 mm thick sheet including pressed-steel frame fabricated from 1.25 mm thick sheet, 12 mm dia MS locking rod, two chromium-plated handles and one mortise-pattern lock, including one coat shop primer and two coats spray paint, Godrej pattern, complete as shown on Drawing No. TD/2004/29 Sheets 1/3 to 3/3 and all as specified and directed. |
| 40 | S&F in repairs stainless-steel drapery rod, 25 mm internal dia, of required length, including matching finials at both ends, pair of SS brackets, necessary fittings and steel screws fixed to walls/beams, including taking down existing U/S drapery rod, complete all as specified and directed. |
| 41 | S&F in repairs stainless-steel kitchen sink with drain board fabricated from 1.00 mm thick SS sheet, overall size n less than 915 x 460 mm with bowl n less than 410 x 330 x 160 mm, including plug, washer, waste, CI cantilever brackets, bedding in cement mortar on dwarf wall, connection to waste pipe, 32 mm dia polyethylene waste pipe and 32 mm bore CP brass waste fitting with long screwed shank, fly nut and flange, including making holes and fixing brackets in CM 1:3/PCC 1:2:4 Type B-0 and taking down existing old U/S sink, complete all as specified and directed. |
| 42 | S&F in repairs stainless-steel plate rack fabricated from 1.00 mm thick SS sheet, size 900 x 750 mm with shelves 230 mm deep and partitions for small/large plates, including necessary SS components, screws, rawl plugs and fixing to wall, all as per approved sample/design kept in GE's office, complete all as specified and directed. |
| 43 | M&L for demolition of reinforced cement concrete in landing slabs, chullah hoods, manhole covers, roofs, floors, chhajjas, beams, staircases, landings and similar suspended work, including cutting reinforcement as necessary to facilitate demolition, getting out materials and disposal as directed, complete all as specified and directed. |
| 44 | M&L for TMT steel reinforcement bars 10 mm dia and over, cut to required lengths and bent to shape, including cranking, bending spirally/hooping for columns, hooking ends and binding with annealed MS wire n less than 0.90 mm dia, complete all as specified and directed. |
| 45 | M&L for formwork to soffits of suspended slabs including roof slabs and similar work for rough-finished concrete surfaces, complete all as specified and directed. |
| 46 | M&L for formwork to sides of slabs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work, exc 100 mm but n exc 200 mm wide, for fair-finished concrete surfaces, complete all as specified and directed. |
| 47 | M&L for reinforced cement concrete 1:2:4 Type B-1, nominal mix, using 20 mm graded crushed stone aggregate as in roof/floor slabs supported on walls, excluding reinforcement and formwork unless otherwise specified, complete all as specified and directed. |
| 48 | M&L for demolition of unreinforced cement concrete in ground floor and paving n exc 150 mm thick, below or above ground level, including getting out and removing rubbish/unserviceable materials as directed, complete all as specified and directed. |
| 49 | M&L for cement concrete 1:3:6 Type C-2 using 40 mm graded crushed stone aggregate, 75 mm thick, as in plinth protection/path laid in panels, surface finished fair and even, complete all as specified and directed. |
| 50 | M&L for demolition/taking up existing roof treatment of any description including cement plaster, roof padding, APP membrane and cement tiles of any thickness from roof surfaces, including cleaning and preparing exposed roof surface for subsequent treatment and taking out and removing rubbish/debris outside MoD land, complete all as specified and |
| 51 | M&L for PCC 1:2:4 Type B-1 using 20 mm graded aggregate mixed with approved waterproofing compound as per manufacturer’s instructions, laid as padding over roof slabs to required thickness and slope, surface finished even and smooth without using extra cement, at any height up to four storeys, complete all as specified and directed. |
| 52 | M&L for 15 mm thick screed bed in cement mortar 1:4 mixed with approved waterproofing compound @ 3% by weight of cement on fair faces of concrete/brick surfaces, finished even and smooth to required slope for receiving APP-based polymeric membrane, complete all as specified and directed. Polymeric membrane and waterproofing compound shall be measured and paid separately. |
| 53 | Supply only approved liquid waterproofing compound, complete all as specified and directed. |
| 54 | M&L for waterproofing treatment to RCC roof slab including parapets comprising application of bituminous primer 85/25 @ 0.40 litre/Sqm over prepared plastered roof/parapet surfaces and laying one layer of APP-based polymeric waterproofing membrane of approved manufacture, 3 mm thick and weighing n less than 3.6 Kg/Sqm, torch applied, with minimum 75 mm side laps and 100 mm end laps; membrane turned up on parapets to minimum 600 mm height and tucked into groove and finished with membrane flashing, complete all as specified and directed. |
| 55 | M&L for PCC 1:2:4 Type B-0 as in roof kerbs/mud stops, rounded or chamfered on edges as required, complete all as specified and directed. |
| 56 | M&L for preparing newly or previously untreated surfaces of any description, over 100 mm width or girth, and applying two coats of aluminium paint, complete all as specified and directed. |
| 57 | M&L for taking down and removing loose/disintegrated concrete/plaster up to 50 mm depth, thoroughly cleaning loose dust and washing exposed surfaces with water and applying approved SBR bonding agent such as Nitobond AR or equivalent by brush to provide bond between existing substrate and new cement/polymer-modified plaster, concrete or screed, complete all as specified and directed. |
| 58 | M&L for applying 15 mm thick polymer-modified cement mortar 1:3 fortified with approved SBR bonding agent, using approximately 5 litres SBR per 50 Kg cement or as recommended by manufacturer, including necessary water and finishing repaired surface to match adjoining ceiling, beam or similar surfaces, complete all as specified and directed. |
| 59 | M&L for preparing corroded reinforcement by removing rust with wire brush/mechanical means, treating with approved rust remover, thoroughly cleaning, washing and air blowing and applying two or more coats of approved two-component zinc-based epoxy anti-corrosion primer to exposed reinforcement, complete all as specified and directed. Quantity of zinc-based epoxy primer shall be measured on actual consumption where stipulated. |
| 60 | M&L for taking down 15 mm bore steel tubing and connections, including disconnecting and cleaning for refixing or removal to store, complete all as specified and directed. |
| 61 | All as per preceding item but for 20 mm bore steel tubing and connections. |
| 62 | S&F 15 mm bore galvanised iron tubing, medium grade, including all necessary fittings and connections, fixed to walls/ceilings or laid/concealed in floors/walls, including cutting chases and making good disturbed surfaces in cement mortar to match existing, jointing and testing, complete all as specified and directed. |
| 63 | All as per preceding item but for 20 mm bore galvanised iron tubing. |
| 64 | S&F in repairs 20 mm bore cast copper-alloy gate valve, high-pressure pattern, with crutch/butterfly handle, screwed at both ends for iron pipe/unions, fixed complete all as specified and directed. |
| 65 | M&L for dismantling existing water storage tank of capacity exc 500 litres but n exc 1000 litres, including disconnecting connections, lowering and removing to store, complete all as specified and directed. |
| 66 | S&F rotational-moulded polyethylene water storage tank, cylindrical vertical closed-top type, 1000 litres capacity, hoisted and fixed in position including necessary connections, complete all as specified in MES SSR Part-I and as directed. |
| 67 | S&F in repairs 20 mm bore high-pressure brass ball valve complete with polyethylene float and fly nut, screwed to iron pipe and fixed complete all as specified and directed. |
| 68 | S&F in repairs vitreous china wash-down water closet pan, white, pedestal pattern, including plastic WC seat and cover, black/white, closed pattern with recessed bottom, CP/MS aluminised hinging device and health faucet/jet spray, including connection to drain and making good, but excluding flushing cistern and flush pipe, complete all as specified and directed. |
| 69 | S&F in repairs PVC low-level flushing cistern, 10 litre capacity, syphonic-action type, ISI marked, including inlet, ball valve, float, handle, brackets and polyethylene low/high-density flush pipe connected to WC, complete all as specified and directed. |
| 70 | S&F in repairs hand shower/health faucet complete with 1.00 metre long flexible tube, wall hook and NRV/backflow preventer, fixed complete all as specified and directed. |
| 71 | S&F in repairs 15 mm bore chromium-plated fancy stop valve/angle valve of copper alloy, high-pressure screw-down pattern with crutch/butterfly handle, screwed at both ends for iron pipe/union, complete all as specified and directed. |
| 72 | S&F in repairs chromium-plated fancy swivel shower rose, 125 mm size, with or without swivel joint, including fixing to steel pipe/union, complete all as specified and directed. |
| 73 | S&F in repairs looking mirror, 600 x 450 x 5 mm thick, selected-quality glass, mounted on 6 mm thick approved backing board/commercial plywood, including framing and fixing to wooden plugs with CP screws and cup washers and taking down existing old U/S mirror, complete all as specified and directed. |
| 74 | S&F in repairs vitreous china wash hand basin, flat-back type, size 580 x 450 mm, including brackets, waste pipe, SS/CP waste coupling, waste chain, plug/stopper, cutting/pinning ends of brackets and making good disturbed surfaces, complete all as specified and directed. |
| 75 | S&F in repairs 15 mm PVC flexible connection, 600 mm long, complete with PTMT nuts, fixed complete all as specified and directed. |
| 76 | S&F in repairs 20 mm dia CP brass tubular towel rail, D-type, 600 mm long between flanges, including brackets and necessary fittings, fixed complete all as specified and directed. |
| 77 | S&F in repairs floor drainer complete with collar and cockroach trap/jali, with or without waste hole as required, fixed complete all as specified and directed. |
| 78 | S&F in repairs CP brass soap dish, fixed complete all as specified and directed. |
| 79 | S&F in repairs CP brass towel ring including pair of CP brass brackets, fixed complete all as specified and directed. |
| 80 | S&F in repairs 15 mm bore fancy-type long-body bib tap, half-turn pattern, cast copper alloy, chromium plated, with wall flange and capstan head, screwed for iron pipe/brass ferrule, fixed complete all as specified and directed. |
| 81 | S&F in repairs glass shelf comprising 5.5 mm thick sheet glass, 120 mm wide and 600 mm long, complete with CP brackets, guard and railing, fixed complete all as specified and directed. |
| 82 | S&F in repairs 15 mm bore CP brass mixer for wash hand basin/sink/wall, suitable for hot and cold water, screw-down pattern for iron pipe connections fixed complete all as specified and directed. |
| 83 | S&F PVC (SWR) pipe, 75 mm nominal outside diameter, Type-B, wall thickness 3.20 mm to 3.80 mm, single-socketed in any length with rubber-ring joints, laid in trenches or floors, including dismantling and taking out existing old U/S PVC/CI pipe with fittings, jointing and testing, complete all as specified and directed. |
| 84 | S&F PVC (SWR) pipe, 110 mm nominal outside diameter, Type-B, wall thickness 3.20 mm to 3.80 mm, single-socketed in any length with rubber-ring joints, laid in trenches or floors, including dismantling and taking out existing old U/S PVC/CI pipe with fittings, jointing and testing, complete all as specified and directed. |
| 85 | S&F 75 mm bore PVC (SWR) pipe, single-socketed in any length, fixed to walls, including dismantling and taking out existing old U/S PVC/CI pipe with fittings, complete all as specified and directed. |
| 86 | S&F 110 mm bore PVC (SWR) pipe, single-socketed in any length, fixed to walls, including dismantling and taking out existing old U/S PVC/CI pipe with fittings, complete all as specified and directed. |
| 87 | S&F in repairs PVC (SWR) bend, 75 mm bore, of any required radius, complete all as specified and directed. |
| 88 | S&F in repairs PVC (SWR) bend, 110 mm bore, of any required radius, complete all as specified and directed. |
| 89 | S&F in repairs PVC (SWR) vent cowl, 110 mm bore, complete all as specified and directed. |
| 90 | M&L for demolition and breaking up existing 100 mm bore salt-glazed stoneware/AC/reinforced cement concrete drain pipe set in cement mortar, including breaking up PCC bed, packing and haunching, getting out materials and disposal as directed, complete all as specified and directed. |
| 91 | S&F 75 mm thick steel fibre reinforced concrete (SFRC) manhole cover with matching iron frame, medium duty, square/rectangular/circular as required, conforming to IS 12592, including setting frame in position and making good, complete all as specified and directed. |
| 92 | M&L for 150 mm bore reinforced cement concrete pipe, Class NP2, laid to required line and gradient and jointed in cement mortar 1:1 complete with collars, including demolition and breaking up existing old pipe, getting out and disposal of unserviceable materials, complete all as specified and directed. |
| 93 | M&L for PCC 1:4:8 Type D-2 using 40 mm graded stone aggregate as bedding to 100 mm bore drain pipes, including packing under and haunching against sides of pipes after laying and testing, complete all as specified and directed. |
| 94 | M&L for cutting into existing manhole/septic tank for connecting new 100 mm bore drain pipe, including making good around pipe and rendering, cutting out existing benching, forming branch channel half-round/three-quarter section in PCC 1:2:4 Type B-1, smooth finishing and reforming benching as required, complete all as specified and directed. |
| 95 | Excavation in trenches n exc 1.50 metre wide and n exc 1.50 metre deep for foundations, manholes and similar work n exc 10 Sqm on plan, getting out excavated material in hard/dense soil, complete all as specified and directed. |
| 96 | Returning, filling in excavated earth, including spreading, levelling, watering and well ramming in layers n exc 250 mm thick, complete all as specified and directed. |
| 97 | Removing excavated soil/material to a distance exc 50 metre and depositing where directed at a level n exc 1.50 metre above the starting point, complete all as specified and directed. |
| 98 | S&F framed steelwork such as grills, gratings, framed guard bars, barred iron doors, ladders, balusters, walkways, railings, ledgers, framework for water tanks and similar work, with ends of bars shouldered/riveted or forged into spikes as required, including hooks, hinges, steel hanging-door fittings, necessary nuts, bolts, welding, fastening and fixing, conforming to steel Grade Fe-290, E-165, complete all as specified and directed. |
| 99 | M&L for excavating post holes or similar holes, each n exc 0.50 Cum, getting out, returning, filling and ramming earth/broken rubble mixed with earth around in layers n exc 250 mm thick, watering and removing surplus soil to a distance n exc 50 metre, including PCC 1:3:6 Type C-2 using 40 mm crushed stone aggregate, size 450 x 450 x 600 mm, as foundation filling/mass concrete, and making good in hard/dense soil, complete all as specified and directed. |
| 100 | S&F welded steel wire fabric weighing n exc 4 Kg/Sqm, fixed complete to wood or steel members, including necessary tying/fixing, complete all as specified and directed. |
| 101 | M&L for preparing new steel surfaces or old previously untreated steel surfaces of any description, over 100 mm width or girth, and applying two coats of synthetic enamel paint of approved colour and shade over one coat of approved primer, complete all as specified and directed. |
| 102 | S&F pre-painted Galvalume aluminium-zinc coated GI-based corrugated steel sheet, 0.50 mm thick, of approved colour and having minimum tensile strength of 550 MPa, as in roof covering or wall cladding, fixed with approved self-drilling/self-tapping screws complete with necessary washers and accessories, including dismantling and taking down existing roofing/cladding sheets and making good disturbed surfaces, complete all as specified and directed. |
| 103 | M&L for vibrator-moulded coloured precast cement concrete interlocking paver blocks, 60 mm thick, Grade M-35, manufactured with grey cement and approved pigment, of any approved shape and size and conforming to IS 15658:2006, laid to required line, level and pattern, including dismantling/taking up existing paver blocks and disposal of unserviceable materials, complete all as specified and directed. |
| 104 | M&L for cement concrete 1:3:6 Type C-2 using 40 mm graded stone aggregate, 75 mm thick, as in paths, hardstandings, sub-base and similar work, including demolition of existing concrete, getting out and disposal of unserviceable materials and finishing surface fair and even, complete all as specified and directed. |
| 105 | M&L for sand filling under floors or in foundations, including spreading in layers, watering and consolidation, complete all as specified and directed. |
| 106 | S&F factory-made kitchen cabinet of overall size 1500 x 600 x 300 mm, fabricated from 18 mm thick PVC Celuka sheet of density n less than 650 Kg/Cum, manufactured by an ISO 9001:2015 certified manufacturer, termite-proof, waterproof and flame-retardant, with decorative laminate on exposed face and balancing laminate on reverse face, comprising cabinet carcass, 18 mm thick backing, one intermediate shelf and two-leaf shutters fabricated from 18 mm thick PVC Celuka board, all joints made with approved solvent-cement adhesive and screws, edges finished with 2 mm thick edge-banding tape or 90-degree edge-bent finish, including SS handles 75 mm long, CP piano hinges, magnetic catchers, brackets, screws, fixing lugs/fasteners and all necessary fittings and fixtures, fixed to wall complete as per approved drawing and manufacturer's specifications, including dismantling and taking down existing old kitchen cabinet of any description, complete all as specified and directed. |
| 107 | S&F in repairs factory-made PVC cabinet shutter, 18 mm thick, fabricated from PVC Celuka board of density n less than 600 Kg/Cum, pre-laminated on one face, cut to required size and fixed to existing/new cabinet framework as shutters to cabinet boxes above kitchen cooking platform or other platforms, including nickel-plated clip hinges, knobs, SS channels and all necessary fittings and fixtures, including dismantling/taking down existing boarding/shutter of any description fixed in any position, complete all as specified and directed. Measurement shall be on the front elevation area of shutters. |
| 108 | M&L for anti-termite treatment along external walls below existing concrete/masonry apron by treating soil with approved chemical emulsion @ 2.25 litres per linear metre, including drilling holes through apron at specified intervals, injecting chemical emulsion and plugging holes/making good disturbed surfaces to match existing, complete all as specified and directed. |
| 109 | M&L for anti-termite treatment of soil under existing floors by injecting approved chemical emulsion @ one litre per hole through 12 mm dia holes drilled at 300 mm centres, including drilling and subsequently plugging holes with cement mortar 1:2 to match existing floor finish, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 110 | M&L for anti-termite treatment of soil under existing floors by injecting approved chemical emulsion @ one litre per hole through 12 mm dia holes drilled at 300 mm centres, including drilling and subsequently plugging holes with cement mortar 1:2 to match existing floor finish, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender