Tender For Addn/ Altn/ Improvement To Omqs At Afs Under Ge (Af) Jorhat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Oct 2026
19 days left
EMD
87360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jorhat → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addn/ Altn/ Improvement To Omqs At Afs Under Ge (Af) Jorhat
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sq.m on plan and n. exc. 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil complete all as specified and as directed. |
| 3 | Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.50m above the starting point in soft/loose soil complete all as specified and as directed. |
| 4 | Material and labour for hardcore of gauge not exc. 63mm of broken stone boulders, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 5 | Material and labour for plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 6 | Material and labour for brickwork (old size) with sub-class ‘B’ bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed. |
| 7 | Material and labour for rendering 15mm thick in cement and sand mortar (1:4) on fair faces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and as directed. |
| 8 | Material and labour for preperation of new surfaces with finishing the exterior rough plasters surface to a smooth finish and applying two coats of exterior emulsion paints by use of mechanical equipments through authorised applicators as per manufacuterer's instructions over one coat of exterior wall primer complete all as specified and as directed. |
| 9 | Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in copping including necessary formwork complete all as specified and as directed. |
| 10 | Material and labour for dismantling posts or struts (wood, steel or R.C.C.) any section Posts embedded in Concrete, brick work, masonry, etc., including taking out embedded portion and making good disturbed ground complete all as specified and as directed. |
| 11 | Material and labour for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundations, filling, etc. complete all as specified and as directed |
| 12 | Materials, labour, fabrication and installation of mild steel fencing posts, straining or terminal posts, struts, etc. fo chain link fencing,made with 65x65x5mm angle iron with or without chamfered angles and flat, splayed, rounded or mitred topsand similar work conforming to Fe-290 Gde E-165, including bending, drilling holes for bolts, etc. and grouting in natural ground or concrete complete all as specified and as directed. |
| 13 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 14 | Supply and fix for 11 to 15mm dia shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm not exc. 10cm long complete all as specified and as directed |
| 15 | Excavating in post holes (or similar holes) each not exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed. |
| 16 | Material and labour for preparation of new steel surfaces of any description over 10cm girth or width and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed. |
| 17 | Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 18 | All as per Serial item No. 17 here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, etc. |
| 19 | Dismantling old chain link fencing of any description complete all as specified and as directed. |
| 20 | Material and labour for providing and fixing chain link fabric fencing made of GI wire of 3.15 mm dia of required width in mesh size 50x50mm including strengthening with 4mm dia 6 Nos wire and nuts, bolts and washers as required complete all as specified and as directed. Note : The work shall be carried out as per IS 4996. |
| 21 | Supply and fix roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-290, Gde E-165 complete all as specified and as directed. |
| 22 | Supply and fix framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and as directed. |
| 23 | Supply and fix pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, etc., AZ150 fixed with self tapping screw complete all as specified and as directed. |
| 24 | Material and labour for endura rustic tiles of size 300x300x10mm thick as in floor, etc., set and jointed in neat cement slurry and pointed in white or colured cement to match over and including 20mm thick screed bedding layer in cement mortar (1:6) complete all as specified and as directed. |
| 25 | Material and labour for plain cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 26 | Material and labour for preperation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over one coat of pink primer when unconnected with other painting or when painted in different tint complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender