Tender For Repair Maintenance And Cleaning Of Drainage System At Inhs Asvini Under Age (I) Asvini, Colaba, Mumbai
Tender Value
30 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
10 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Maintenance And Cleaning Of Drainage System At Inhs Asvini Under Age (I) Asvini, Colaba, Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | M & L for Systematic cleaning/desilting of drainage lines/storm water drains of any size and depth by manual means using shovels, picks, bamboo rods, buckets, ropes, push carts and other required tools & tackles with all safety mesaures including removal of silt, sludge, mud, garbage, vegetation and debris from the drain, maintaining free flow of drainage during operation, taking all necessary safety precautions, providing barricading, caution boards, PPE, gas testing wherever required, loading, transportation and disposal of excavated/de-silted material outside departmental/M.D. limits at approved dumping locations, complete in all respects as directed by the Engineer-in-Charge. |
| 2 | M & L for Cutting into existing manholes for connecting new drains, making good to pipe & rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2 :4 type B-1 smooth finished, & reforming benching as required, internal dia of pipe 150mm complete all as specified and directed by the Engineer-in-Charge. |
| 3 | Supply & Fixing in repairs cast iron work grade FG 150, articles exc 5 kg each unmachined, in brackets, gully traps/covers, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles |
| 4 | Material & Labour for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, bed plates, kerbs etc. and similar work including necessary formwork weathring slightly rounded or chamfered complete all as specified & directed |
| 5 | Demolition of RCC cover slab of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition and separating, scraping and cleaning of reinforcement and removing debris outside MD land.Note: The place of disposal shall be find out by the contractor. |
| 6 | Material & Labour for providing precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) in cover slabs for manholes, etc and similar articles with plain fair faces including chamfers, weathering, throating etc and setting in cement mortar (1:4) with joints to match. Note:- (i) Precast cement concrete cover shall be reinforced. Reinforcement shall be measured and paid separately. |
| 7 | Material & Labour for TMT (CRS) bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips. |
| 8 | Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. |
| 9 | Material & Labour for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified. |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for . |
| 11 | Material & Labour for MS framed work such as grills, gratings etc with ends of bars shouldered and or rivated or forged into spikes, framed guard bars and similar work as in drain cover conforming to Fe 410 or Fe 310-0 complete all as specified. |
| 12 | S&F for Fe-410-W (Gde-E-250)quality-A plates (plain and chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment in drain cover, manholes cover etc including all necessory drilling, bolting,riveting or welding complete all as specified and directed. |
| 13 | Material & Labour for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of black japan over a coat of red oxide primer paint complete all as specified. |
| 14 | Taking down cement plaster of any description and in any position including raking out joints, hacking for key scrubbing down with water etc and removing of debris outside MD land complete all as specified.Note: The place of disposal shall be find out by the contractor. |
| 15 | Material & Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finished even & smooth without using extra cement complete all as specified. |
| 16 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and removing debris outside MD land complete all as specified.Note: The place of disposal shall be find out by the contractor. |
| 17 | Material & labour for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified |
| 18 | M&L for cement concrete 1:3:6 type C2, using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed by Engineer-in-Charge. |
| 19 | M & L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc complete all as specified and directed by Engineer-in-Charge. |
| 20 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and removing debris outside MD land complete all as specified. |
| 21 | M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) filling as sub base in floors,paving, sub floor etc finished even and finished fair and even complete all as specified. |
| 22 | M&L for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified . |
| 23 | M&L Colured 40 cm x 40 cm x 10-12 mm thick Non skid (Hi Traffic grip tiles) set jointed and pointed in neat cement slurry in floors over 20mm of screed bed in CM 1:4 including coping at edges in PCC Type B1 (1:2:4)(Rates of dismantling of stone slabs and tiles are included complete all as specified and directed by Engineer in Charge). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender