Tender For Construction Of Special Prison For Women And Prison Staff Quarters ( 6 Nos Of Deputy Jailor, 10 Nos Assistant Jailor, 220 Nos Of Jail Warder Quarters) With Development Works And Security Perimeter Wall (Phase Ii & Iii) At Bilichi Village,
Tender Value
115.09 Crore
Estimated cost
Bid Submission
28 Oct 2026
26 days left
EMD
57.64 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Special Prison For Women And Prison Staff Quarters ( 6 Nos Of Deputy Jailor, 10 Nos Assistant Jailor, 220 Nos Of Jail Warder Quarters) With Development Works And Security Perimeter Wall (Phase Ii & Iii) At Bilichi Village, Coimbatore North Taluk In Coimbatore District.
BOQ
| Sl. No. | Item Description |
| 1 | EW-AS-NC-IR : Earth work excavation in all soils (including refilling) EW-AS-NC-IR-2ma) 0 to 2m depth. |
| 2 | EW-AS-NC-IR-3mb) 2 to 3m depth. |
| 3 | EW-DMR-NC-IREarth work excavation for foundation in soft disintegrated rock, soft laterite rock or Kankar soft rock not requiring blasting (including refilling) EW-DMR-NC-ER-2ma) 0 to 2m depth. |
| 4 | EW-DMR-NC-ER-3mb) 2 to 3 m depth. |
| 5 | EW-AS-OC-EREarth work excavation for Open Foundation in all soils and sub-soils to the required depth (Excluding Refilling).EW-AS-OC-ER-2ma) 0 to 2m depth. |
| 6 | EW-AS-Dr-EREarth work excavation for Open Foundation for drains in all soils and subsoils to the required depth (Excluding Refilling) (Drain having bed width upto 1.25 metre).EW-AS-Dr-ER-2ma) 0 to 2m depth. |
| 7 | EW-DMR-OC-EREarth work excavation for Open foundation in soft disintergrated rock, laterite Kankar or soft rock not requiring blasting . (Excluding Refilling).EW-DMR-OC-ER-2ma) 0 to 2m depth. |
| 8 | ST-FB&S-PC-ATProviding pre-constructional Antitermite treatment |
| 9 | Breaking, removing and stacking for pre measurements of hard rock requiring blasting by the way of silent blasting using approved rock disintegrating chemicals/ rock splitting materials by drilling holes to appropriate |
| 10 | FL-FB-SCSsupplying and filling in foundation and basement with filling crushed stone sand in layers of 150 mm thickness well watered, rammed and consolidated complying with relevant standard specification |
| 11 | Granular Sub-base with Graded Material (Table:- 400-1) - Plant Mix Method |
| 12 | Wet Mix Macadam (Table 400-13) (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification |
| 13 | FL-FB-EAFilling in foundation and basement and other similar works with Excavated earth in layers of 150mm thick well watered rammed and consolidated complying with relevant standard specification etc., |
| 14 | FL-FB-SDsupplying and filling in foundation and basement with Stone dust in layers of 150 mm thickness well watered, rammed and consolidated complying with relevant standard specifications etc., |
| 15 | FL-FB-GRsupplying and filling in foundation and basement with gravel in layers of 150 mm thickness well watered, rammed and consolidated complying with relevant standard specifications (including tax collected by Govt.) |
| 16 | CN-FB-PCC-1:5:10Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement |
| 17 | CN-FB-PCC-1:2:4Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) |
| 18 | CN-FB-PCC-1:8:16Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge broken Brick Jelly |
| 19 | CN-FB-PCC-1:4:8Plain cement concrete 1:4:8 (one of cement, four of crushed stone sand and eight of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40mm gauge hard broken jelly |
| 20 | CN-F&S-PCS-M20-20/40-(5F)Providing precast concrete slab for cupboard ward robes shelves, in Standardised concrete mix M20 for the following thickness excluding in the following floors (Measurement will be taken including bearing in wall also)CN-SS-PCS-M20-20I. 20mm thickCN-SS-PCS-M20-20-(GF)a. In Ground floor |
| 21 | CN-SS-PCS-M20-20-(1F)b. In First floor |
| 22 | CN-SS-PCS-M20-20-(2F)c. In Second Floor |
| 23 | CN-SS-PCS-M20-20-(3F)d. In Third Floor |
| 24 | CN-SS-PCS-M20-20-(4F)e. In Fourth Floor |
| 25 | CN-SS-PCS-M20-20-(-(5F)f. In Fifth Floor |
| 26 | CN-F&S-PCS-M20-40II. 40mm thickCN-FB-PCS-M20-40a. In Foundation & basement |
| 27 | CN-SS-PCS-M20-40-(GF)b. In Ground floor |
| 28 | CN-SS-PCS-M20-40-(1F)c. In First floor |
| 29 | CN-SS-PCS-M20-40-(2F)d. In Second floor |
| 30 | CN-SS-PCS-M20-40-(3F)e. In Third Floor |
| 31 | CN-SS-PCS-M20-40-(4F)f. In Fourth Floor |
| 32 | CN-SS-PCS-M20-40-(-(5F)g. In Fifth Floor |
| 33 | CN-SS-JV-M20-50Precast cement concrete Jally ventilator using standardised concrete mix M20 (without vibrating charges) using 20mm gauge hard broken stone jelly for the following thickness, complete in the following floors. 50mm thickCN-SS-JV-M20-50-(GF)a. In Ground Floor |
| 34 | CN-SS-JV-M20-50-(1F)b. In First floor |
| 35 | CN-SS-JV-M20-50-(2F)c. In Second floor |
| 36 | CN-SS-JV-M20-50-(3F)d. In Third floor |
| 37 | CN-SS-JV-M20-50-(4F)e. In Fourth floor |
| 38 | CN-SS-JV-M20-50-(5F)f. In Fifth Floor |
| 39 | CN-SS-JV-M20-50-(6F)g. sixth floor |
| 40 | CN-F&S-RCC-M30Providing and laying in position, Standardised Concrete Mix M-30 Grade in a accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for the all RCC items of worksCN-FB-RCC-M30a. In Foundation and basement |
| 41 | CN-SS-RCC-M30-(GF)b. In Stilt /Ground Floor |
| 42 | CN-SS-RCC-M30-(1F)c. In First Floor |
| 43 | CN-SS-RCC-M30-(2F)d. In Second floor |
| 44 | CN-SS-RCC-M30-(3F)e. In Third Floor |
| 45 | CN-SS-RCC-M30-(4F)f. In Fourth Floor |
| 46 | CN-SS-RCC-M30-(-(5F)g. In Fifth Floor |
| 47 | CN-SS-RCC-M30-(-(6F)h. In Sixth Floor |
| 48 | CN-RWH-P/AG-M20Providing Rain water harvesting pit CN-RWH-P-M20a. Providing pit |
| 49 | CN-RWH-AG-M20b. Augering 30cm dia |
| 50 | CN-FPS-1:3:6-50mmSupplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 (one of cement,three of crushed stone sand and six of 20mm hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) |
| 51 | BW-PW 50mm-KB-CM 1:4Brick partition walls 50mm thick using kiln burnt country bricks of size 8¾”x4¼”x2” (22x11x5cm) in cement mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) for super structure in the following floorsBW-PW 50mm SS-KB-CM 1:4-(GF)b. In Ground Floor/Stilt floor |
| 52 | BW-PW 50mm SS-KB-CM 1:4-(1F)c. In First Floor |
| 53 | BW-PW 50mm SS-KB-CM 1:4-(2F)d. In Second Floor |
| 54 | BW-PW 50mm SS-KB-CM 1:4-(3F)e. In Third Floor |
| 55 | BW-PW 50mm SS-KB-CM 1:4-(-(4F)f) In Fourth Floor |
| 56 | BW-PW 50mm SS-KB-CM 1:4-(-(5F)g) In Fifth Floor |
| 57 | BW-FB-FLB-CM 1:5Brick work in cement mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm in foundation and basement |
| 58 | BW-MW-FLB-CM 1:6Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floorsBW-SS-FLB-CM 1:6-(GF)b. In Ground Floor/Stilt floor |
| 59 | BW-SS-FLB-CM 1:6-(1F)c. In First floor |
| 60 | BW-SS-FLB-CM 1:6-(2F)d. In Second floor |
| 61 | BW-SS-FLB-CM 1:6-(3F)e. In Third Floor |
| 62 | BW-SS-FLB-CM 1:6-(-(4F)f) In Fourth Floor |
| 63 | BW-SS-FLB-CM 1:6-(-(5F)g) In Fifth Floor |
| 64 | BW-SS-FLB-CM 1:6-(-(6F)h) In Sixth Floor |
| 65 | BW-PW 110mm-FLB-CM 1:4Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floorsBW-PW 110mm FB-FLB-CM 1:4a. In Foundation and basement |
| 66 | BW-PW 110mm SS-FLB-CM 1:4-(GF)b. In Ground Floor/Stilt floor |
| 67 | BW-PW 110mm SS-FLB-CM 1:4-(1F)c. In First floor |
| 68 | BW-PW 110mm SS-FLB-CM 1:4-(2F)d. In Second floor |
| 69 | BW-PW 110mm SS-FLB-CM 1:4-(3F)e. In Third Floor |
| 70 | BW-PW 110mm SS-FLB-CM 1:4-(-(4F)f) In Fourth Floor |
| 71 | BW-PW 110mm SS-FLB-CM 1:4-(-(5F)g) In Fifth Floor |
| 72 | BW-PW 110mm SS-FLB-CM 1:4-(-(6F)h) In Sixth Floor |
| 73 | BW-PW 70mm-FLB-CM 1:4Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors BW-PW 70mm SS-FLB-CM 1:4-(GF)b. In Ground Floor/Stilt floor |
| 74 | BW-PW 70mm SS-FLB-CM 1:4-(1F)c. In First floor |
| 75 | BW-PW 70mm SS-FLB-CM 1:4-(2F)d. In Second floor |
| 76 | BW-PW 70mm SS-FLB-CM 1:4-(3F)e. In Third Floor |
| 77 | BW-PW 70mm SS-FLB-CM 1:4-(4F)f. In Fourth Floor |
| 78 | BW-PW 70mm SS-FLB-CM 1:4-(-(5F)g) In Fifth Floor |
| 79 | FA-EJ-FP-BitSupplying and fixing of 20mm thick bituminous expansion joint filler pad of approved quality and make inclusive of conveyance charges, cutting the pad to the required size, cost of materials and labour charges for fixing in position wherever necessary for all floors etc., |
| 80 | CN-FL-PCC-1:5:10Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly |
| 81 | PL-FL-CM 1:4-20mmPlastering the top of flooring in cm 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick |
| 82 | CN-FL-Ellis-ChipFinishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand) |
| 83 | CN-TEC-WC-NSWeathering Course with concrete broken brick jelly 20mm gauge in pure burnt lime stone slaked and screened (No Sand) |
| 84 | TL-RO-PT-CM 1:3Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2% |
| 85 | TL-WL-GZT-CM 1:2Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) |
| 86 | TL-FL-CT-CM 1:3Supplying and fixing of colour Ceramic Tiles Anti skid over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick |
| 87 | TL-FL-GS-D-Nosproviding double nosing to the edges of granite slab of 20mm thick including labour, power consumption, tools & plants required, true to horizontal etc., for kitchen platform and other similar works in all floors |
| 88 | TL-FL-SSL-CM 1:3Supplying and laying of polished shahabad slab /stone, 20mm thick with machine cut edges of size 2'x'2' below (Grey colour) of approved qualty for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) |
| 89 | TL-FL-NVT-CM 1:3Supplying and fixing of Stain free Nano polish Vitrified Tiles of size (600x600x8mm) for flooring and other similar works in cement mortar 1:3 (one of cement and three of crushed stone sand, including Mortar Plasticizer (Liquid) at 200ml per bag) |
| 90 | TL-FL-CDT-CM 1:3Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) |
| 91 | TL-FL-Kota-CM 1:3Supplying and laying of Rajasthan Kota stone, 20mm thick with Machine Cut Edges of size below 2'0\\" x 2'0\\" for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) |
| 92 | W-FW-WOS-RCCProviding Form work and centering for reinforced cement concrete works including supports and struttinga. For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc., |
| 93 | FW-SS-WS-PSb.Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works |
| 94 | FW-SS-WS-COc.For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works. |
| 95 | FW-SS-WS-VWd.For vertical walls |
| 96 | FW-SS-WS-CCe.Circular columns |
| 97 | FW-SS-WS-CSf.Curved surface |
| 98 | FW-SS-AHS-1m htProviding additional Strutting to centering of R.C.C slab and beams of all surfaces or any other form works required at site during execution of work |
| 99 | FW-SS-AHS-2legProviding two legged scaffolding using 15cm diameter casurina props or best quality bamboo posts FW-SS-AHS-5.5mb).5.50 m height in addition of 2.5m ht |
| 100 | PL-OU-CM 1:5-12mmPlastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick |
| 101 | PL-IN-CM 1:4-12mmPlastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick |
| 102 | PL-CL-CM 1:3-10mm thickSpecial ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) |
| 103 | PL-WPC-CM 1:3-12mmPlastering in cm 1:3 (one of cement and three of crushed stone sand (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk |
| 104 | PL-OU-CM 1:5-BorPlastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick for border finish in all floors for elevation purposes,PL-OU-CM 1:5-150mma) 150mm wide border |
| 105 | PL-OU-CM 1:5-75mmb) 75mm wide border |
| 106 | PL-OU-CM 1:5-50mmc) 50mm wide border |
| 107 | PA-CE-WW-SL 3CWhite washing three coats using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding etc., |
| 108 | PA-IN-WP-2C BPCPainting the new wood work with two coats of approved first class synthetic enamel ready mixed paint including to one coat of primer |
| 109 | PA-Ex-IW-2C EPPainting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats of approved first class synthetic enamel ready mixed paint |
| 110 | PA-IN-WP-2CP BWPSupplying and applying of Full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls |
| 111 | PA-IN-PEP-2C BPCPainting the false ceilling / New walls with two coats of 1st class ready mixed PLASTIC EMULSION PAINT of best approved quality colour and shade including a priming coat |
| 112 | PA-Ex-EEP-2C BPCPainting the new walls with two coats of approved best Exterior Emulsion paint of best approved quality color and shade including to one coat of approved primer paint |
| 113 | PA-IN-MP-2C EPThe new wood work with two coats of best melamine polish/varnish of approved quality and brand including preparation of surface etc. |
| 114 | N-WR-TWF-WRFSupplying and fixing of Teak Wood wrought and put up JN-WR-TWF-A 2m Fa. Teak wood over 2.00 metre and below 3 metre length |
| 115 | JN-WR-TWF-B 2m Fb. Teak wood below 2.00 metre length |
| 116 | JN-D-DC-MSupply and fixing of best approved superior variety magnetic door catches suitable for doors |
| 117 | JN-GP-PHG-TkSupplying and fixing of following thick pin headed Glass panels with aluminium anodised ‘U’ shape beedingJN-GP-PHG-4mmb. 4mm thick |
| 118 | JN-D-MS-HFSupplying of mild steel hold fasts horizontally twisted of size 230x40x4mm with pair of suitable iron screws. |
| 119 | JN-PVC D-SL-LProviding and fixing factory made polyvinyl chloride ( PVC ) Door Frame of size 50X47mm with a wall thickness of 5mm, made out extruded 5mm rigid UPVC foam sheet, mitred at two corners and joined with 2 nos of 150mm long brackets of 15X15mm M.S square tube. |
| 120 | JN-V-UPVC-LVUPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. |
| 121 | JN-UPVC W-UPVC-OP WUPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. |
| 122 | JN-BWR D-SL-Ply-2.1HSupplying and fixing of single leaf door shutters by using Best Indian T.W. door shutters with 9mm thick phenol bonded BWR grade plywood as per IS 303-1989 (General) with IS 5539-1969 (for preservative treatment) and IS 848-1974 (for adhesives) with relevant IS specificationsJN-BWR D-SL-Ply-0.75x2.1a.750mm x 2100mm |
| 123 | JN-TWPD-SL-125mm S-BF-2.1HSupplying and fixing of Best Indian Teakwood Panelled door shutters Single leafJN-TWPD-SL-125mm S-BF-1x2.1c.1000mm x 2100mm |
| 124 | JN-TWPD-SL-125mm S-BF-2.4HSupplying and fixing of Best Indian Teakwood Panelled door shutters Single leafN-TWPD-SL-125mm S-BF-1.2x2.4d.1200mm x 2400mm |
| 125 | JN-TWPD-SL-125mm S-BF-1.5x2.4e.1500mm x 2400mm |
| 126 | JN-SC D-SL-FLS-2.1HSupplying and fixing of Single leaf Solid core flush door shutters using boiled water resistance (BWR) JN-SC D-SL-FLS-0.9x2.1b.900mm x 2100mm |
| 127 | JN-SC D-SL-FLS-2.4HSupplying and fixing of Single leaf Solid core flush door shutters using boiled water resistance (BWR) JN-SC D-SL-FLS-0.9x2.4b.900mm x 2400mm |
| 128 | JN-SC D-DL-FLS-1x2.4c.1000mm x 2400mm |
| 129 | JN-SC D-DL-FLS-1.2x2.4d.1200mm x 2400mm |
| 130 | MW-MS-GR-WManufacturing and supplying windows conforming to IS 1038/1983 specification with steel sections used for the fabrication of windows |
| 131 | MW-MS-GRSupplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate including one coat of primer and labour for fixing in position etc. all complete |
| 132 | MW-HR-SS-SHManufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level |
| 133 | MW-RS-PP-MOSupplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etcMW-RS-PP-8 Sqma) Manually Operated (up to 8 sqm. Area) |
| 134 | RE-RTS-Fe-NCSupplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry) |
| 135 | Supplying and laying of following colour Granite slabs (superfine polished with machine cut edges) of size 4'-0'x 2'-0' of 18 to 20 mm thick for kitchen arrangements Jet blocka. In Ground floor |
| 136 | b. In First floor |
| 137 | c. In Second floor |
| 138 | d. In Third floor |
| 139 | e. In Fourth floor |
| 140 | f.Fifth floor |
| 141 | T.W. frame & TW styles & rails with BWR double leaf shutters for cup board/ ward robes including two coat enamel paint & one coat primer. |
| 142 | RW-KS-CC 1:3:6-PCSupplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6 (One of cement, three of crushed stone sand and six of hard broken stone jelly) using 20mm size hard broken stone jelly including Cost of Mortar Plasticizer (Liquid) at 200ml per bag, |
| 143 | WS-EX-RWD-PVCSupplying and fixing of following dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipeWS-EX-RWD-PVC 110b. 110mm dia PVC SWR pipe |
| 144 | WS-IN-S-CISupplying and fixing of C.I. steps of approved quality and brand (not less than 5kg each) |
| 145 | WS-IN-HCP-LBTSupplying and fixing of 15mm dia half turn C.P Tap (Long body Tap) of Best quality |
| 146 | WS-IN-HCP-SBTSupplying and fixing of 15mm dia half turn C.P Tap (Short body Tap) of Best quality |
| 147 | WS-EX-WST-HDPESupply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of following litresWS-EX-WST-700 lt(a)700 litres |
| 148 | WS-EX-WST-1000 lt(c)1000 litres |
| 149 | WS-EX-CI-Man-60 x 60Supplying and fixing of C.I man hole cover with locking arrangements of approved quality and brand of size 0.6m x 0.6m (50Kg) as per standard specifications including cost of material, labour charges for fixing etc., |
| 150 | SA-IN-CS-SSupply, delivery and fixing of cuddappah sink of size 600mm x 600mm x 200mm thick |
| 151 | WS-EX-ASTM-PVCSupplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of suitable schedule (40/60/80) of wall thickness WS-EX-ASTM-32 PVCa) 32mm dia. |
| 152 | WS-EX-ASTM-25 PVCb) 25mm dia |
| 153 | WS-IN-ASTM-20 PVCc) 20mm dia |
| 154 | WS-IN-HW-20 FCSupplying, laying and fixing of the following Pipe of best approved quality for Hot water line fully concealed in walls WS-IN-HW-20 GIa. 20mm dia G.I. pipe |
| 155 | SA-IN-PVC EC-32Supplying and fixing of 32mm dia PVC Tee with end cap of best approved quality with IS, |
| 156 | SA-IN-WB-PSupplying and fixing of following porcelin wash hand basin , superior variety of size 550x400mm SA-IN-WB-WWOPb).White without pedastal wash hand basin |
| 157 | SA-IN-GT-CBSupplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in CC 1:8:16 |
| 158 | SA-IN-NT-PVCSupplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) |
| 159 | SA-IN-IWC-GFSupplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark with PVC SWR grade 'P' or 'S' trap In Ground floor. |
| 160 | SA-IN-IWC-OGFSupplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark with PVC SWR grade 'P' or 'S' trap (Other than ground floor) |
| 161 | SA-IN-EWC-WSupplying and fixing EWC superior variety (white) 500mm with PVC SWR grade `P` or `S` trap |
| 162 | SA-Ex-SWR P-DiaSupplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type `B` for soil line with relevant specials confirming to IS 14735 SA-Ex-SWR P-110a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete., |
| 163 | SA-Ex-SWR P-75b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete., |
| 164 | SA-Ex-SWR P-50Supplying,laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark conforming to IS 13952:1992- type `B` for waste water line with relevant specials conforming to IS 14735 |
| 165 | SA-Ex-SN8-DiaSupplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003, superior variety and tested with water,SA-Ex-SN8-110a. 110 mm UPVC Non Pressure pipe |
| 166 | SA-Ex-SN8-160b. 160 mm UPVC Non Pressure pipe |
| 167 | SA-Ex-PVC B-DiaSupplying and fixing of following dia PVC Bend as per IS 10124/1982 Part II with superior varietySA-Ex-PVC B-110a. 110 mm dia PVC bend 6 KSC |
| 168 | SA-Ex-PVC B-160b. 160 mm dia PVC bend 6 KSC |
| 169 | SA-Ex-PVC T-DiaSupplying and fixing of following dia PVC Equal tee as per IS 10124/1982 Part II with superior variety SA-Ex-PVC T-110a. 110 mm dia PVC Equal Tee |
| 170 | SA-Ex-PVC T-160b. 160 mm dia PVC Equal Tee |
| 171 | SA-IN-SS-SSupply, delivery and fixing of Stainless steel sink following size in all floors.SA-IN-SS-600 x 600 x 200c) 600mm x 600mm x 200mm |
| 172 | IN-FT-RR-MSupplying and fixing of following rooms fittings including cost of materials with screws, TW plugs and labour charges for fixing in position etc.IN-FT-Alu HR-20mma) 20mm dia Aluminium hanger rod |
| 173 | IN-FT-Alu TR-75cma) 75cm long Aluminium Towel Rail |
| 174 | IN-FT-Alu CS-5Pa) Aluminium plate with five pins for coat stand |
| 175 | IN-FT-IC PH-8 Ga) Iron chromium plated 8 gauge Picture hooks |
| 176 | IN-FT-BM-PVCsupplying and fixing of BEVELED EDGE MIRROR of approved quality and brand of following size IN-FT-BM-500x400a) 500x400x5.5mm shelf type mounted |
| 177 | DW-CS-C-SJClearing Scrub Jungle Clearing the scrub jungle available in the site and removing the same and disposing off as directed by the departmental officers. |
| 178 | LW-TP-TP-TSupply and planting of avenue trees |
| 179 | LW-TP-TG-Tri SSupplying and fixing of triangular shape chicken mesh tree guard |
| 180 | EL-IN-EP-LPWiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable EL-IN-EP-WCRa) Light point with ceiling rose |
| 181 | EL-IN-EP-WOCRb) Light point with bakelite pattern type holder |
| 182 | EL-IN-EP-CBc) Point wiring for calling bell/ buzzor with push type switch |
| 183 | EL-IN-EP-FPWiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable for FAN POINT |
| 184 | EL-IN-EP-SLPWiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable, for Stair case light point |
| 185 | EL-IN-EP-SBIWiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable for 5 amps. 5 pin plug socket point at Switch Board Itself |
| 186 | EL-IN-EP-CPWiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable for 5 amps. 5 pin plug socket point at convenient places |
| 187 | EL-IN-EP-PSSupplying and fixing 15amps 3 pin plug type socket |
| 188 | EL-IN-EF-ESProviding Earthing Station using Pipe electrode as per IS 3043 |
| 189 | EL-IN-EF-FHSupply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook |
| 190 | EL-IN-EF-ACCharges for assembling and fixing of ceiling fan |
| 191 | EL-IN-EF-FSupply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etcEL-IN-EF-48\\"Fa) 48\\" Electric fan 1200mm sweep |
| 192 | EL-IN-EF-EFSupplying and fixing of following dia sweep AC exhaust fan of approved ISI Quality EL-IN-EF-EF225a) 225 mm dia sweep AC exhaust fan |
| 193 | EL-IN-EF-EF300b) 300 mm dia sweep AC exhaust fan |
| 194 | Supplying, installting, testing and commissioning of pulsating arrangement power fencing with Energiaer System comprising of Energizer SF 3000 with alarm, solar panel 150 watts, Solar charge controller 10Amps, Exide 12V 105 Ahr Battery, Siren, Fence Lighting, Enclosure Box, Soft Cable for siren and Stroe, DI cable, solar panel stand etc |
| 195 | EL-IN-LED.F-LBSupplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite pattern holder of best approved variety EL-IN-EF-9Wa) 9 watts LED bulb |
| 196 | EL-IN-EF-LED-ROU-18WSupply and fixing of 18W comet surface Round type |
| 197 | EL-IN-LED.F-TLSupply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark |
| 198 | EL-IN-EF-BHSupplying and fixing of water tight Bulk head fitting suitable for LED with guard, including ncessary connections, cost of materials etc |
| 199 | EL-EX-EF-SLSupply and fixing of LED Street lighting luminaries suitable for fixing LED Street Light Fitting with LEDEL-EX-EF-SL-25W25W LED Street Light Fitting with LED |
| 200 | EL-IN-LED.F-LBSupplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite pattern holder of best approved variety EL-IN-EF-12Wb) 12 watts LED bulb |
| 201 | EL-IN-EF-TPNSupply and fixing of follwing Triple pole main switch with fuse and neutral link on a suitable well varnished teak wood board EL-IN-EF-TPN-32aa)32 amps triple pole main switch with fuse and neutral link |
| 202 | EL-IN-EF-TPN-63ab)63 amps triple pole main switch with fuse and neutral link |
| 203 | EL-IN-EP-ELCB-TPSupply and fixing of electro mechanically operated three phase earth leakage circuit breaker/residual current circuit breaker (ELCB/RCCB) |
| 204 | EL-IN-WR-2x1.5m2Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, |
| 205 | EL-IN-WR-2x2.5m2Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, |
| 206 | EL-IN-WR-2x4m2Run of main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, |
| 207 | EL-IN-WR-4x4m2Supply and Run off main with 4 wires of 4 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, |
| 208 | EL-IN-WR-4x10m2Supply and Run off main with 4 wires of 10 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, |
| 209 | EL-IN-OEP-OLPWirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable confirming to IS 694 / 1980 with ISI mark (Open wiring)EL-IN-OEP-WCRa. Light point with ceiling rose |
| 210 | EL-IN-OEP-WOCRb. Light point without ceiling rose |
| 211 | EL-IN-OEP-SBIWirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 amps. 5 pin plug socket point at Switch Board Itself (Open wiring) |
| 212 | EL-IN-OWR-2x1.5m2Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,. [Open wrining] |
| 213 | Run of main with 4 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, [Open wrining] |
| 214 | EL-IN-EF-AC Plug - 20ASupply and fixing of 20A Flush type Wall Socket, 20A DP MCB and 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) |
| 215 | EL-IN-EF-TWPSupplying and fixing of 1 no of following thick TW plank varnished with 1 no of 25 amps 250 volts fuse unit and 1 no copper earth plate of suitable size bolts and nuts on wall for EB service connections EL-IN-EF-TW P-450x300x20b)1 no of 450x300x20mm thick TW plank |
| 216 | EL-IN-EF-8 SWGSupplying and laying of 8SWG GI wire on wall below ground levels with necessary ‘U’ Nails, earth work excavation and refilling etc. |
| 217 | EL-IN-AEP-AEPWiring with 1.5 sq.mm copper PVC insulated unsheathed single 1.1 KV grade core / cable with continuous earth by means of 1.5 sq.mm copper PVC insulated unsheathed single core 1.1 KV grade core / cable for Administrative block and community center EL-IN-AEP-WCRa. Light point with ceiling rose |
| 218 | EL-IN-AEP-WOCRb. Light point without ceiling rose |
| 219 | EL-IN-AEP-FPWiring with 1.5 sq.mm copper PVC insulated unsheathed single 1.1 KV grade core / cable for FAN POINT sheet for Administrative block and community center |
| 220 | EL-IN-AEP-SLPWiring with 1.5 sq.mm copper PVC insulated unsheathed single 1.1 KV grade core / cable for Stair case light point sheet for Administrative block and community center |
| 221 | EL-7S-4w MCB-WO ELCB-OWSupply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one No 4 pole incoming MCB / Isolator |
| 222 | EL-7S-6w MCB-WO ELCB-OWSupply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one No 4 pole incoming MCB / Isolator |
| 223 | EL-IN-EP-CuPlate earthing with copper plate of size 600 x 600 x 3mm as per the ISI specification with an earth electrode of 2.1 m. Class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonary work and with 38mm RCC cover slab for brick masonary etc. |
| 224 | EL-EX-LTUG-BGSupplying and laying of following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 m putting 0.15m layer of sand and covering the cable completely with bricks and sand refilling the earth Below Ground Level.EL-EX-LTUG-BG-3.5C95j). 3.5 core 95 sq.mm. |
| 225 | EL-EX-LTUG-BG-3.5C120k). 3.5 core 120 sq.mm. |
| 226 | EL-EX-Br CG-S&DSupplying and delivery of following brass cable gland suitable for following core sqmm PVC armoured LTUG cable with earth strip around the gland EL-EX-Br CG-S&D-3.5C95j). 3.5 core 95 sq.mm. |
| 227 | EL-EX-Br CG-S&D-3.5C120k).3.5 core 120 sq.mm. |
| 228 | EL-EX-ET-S&FSupply and providing cable end termination of following core and sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. EL-EX-ET-S&F-3.5C95j). 3.5 core 95 sq.mm. |
| 229 | EL-EX-ET-S&F-3.5C120k).3.5 core 120 sq.mm. |
| 230 | EL-V DB-4w MCB-63A,Iso IFSupply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only (Higher end) |
| 231 | IN-FC-GAL-0.47supplying and fixing in position of colour galvalume sheet of 0.47mm thick as ridge piece inclusive of overlap length labour charges and nut, bolts etc., |
| 232 | MW-SNB-MS-N&LO BSupplying, fabrication and erection in position of M.S. scheme name and layout board |
| 233 | Supply, Erection and Commissioning of 1No of Passengers lift (13 Persons - 884 Kgs.) For (G+2) at site according to the following specification Number of lifts / Type of lift: ONE / MACHINEROOMLESS ELEVATOR – PASSENGER Load / Speed : 13 Persons (884Kags.) |
| 234 | Supply, Erection and Commissioning of 1No of Passengers lift (13 Persons - 884 Kgs.) For (Stilt+5) at site according to the following specification Number of lifts / Type of lift: ONE / MACHINEROOMLESS ELEVATOR – PASSENGER Load / Speed : 13 Persons (884Kags.) |
| 235 | Supplying and fixing of GA FOR 24 SERVICE EB METERING PANEL TYPE OF PANEL: INDOOR FLOOR MOUNTING SINGLE FRONT. |
| 236 | WS-IN/EX-PVC/UPVC/CPVC/GI/CI/-AGLSupplying, laying and jointing the following dia of (PVC Pipes (WITH ISI MONOGRAM)/(6 kg. per cm2)/(10 kg. per cm2) /UPVC Pipe (Un-Plasticized Polyvinyl Chloride) (Schedule-40 / Schedule-80)/ CPVC Pipe (Chlorinated Poly Vinyl Chloride) / GI Pipes) Pipes with ISI mark of best approved quality . for Above Ground Level 25mm Dia PVC pipe |
| 237 | EL-IN-EF-25mm x 3mmSupply and run of 25mm x 3mm tin coated copper flat with necessary clamps / supports on wall / floor/ground for earth connection etc |
| 238 | Supply and fixing of 65 mm dia. (2 -1/2\\") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box |
| 239 | WS-IN/EX-PVC/UPVC/CPVC/GI/CI/-BGLSupplying, delivery laying and testing of following dia (PVC Pipes (WITH ISI MONOGRAM)/(6 kg. per cm2)/(10 kg. per cm2) /UPVC Pipe (Un-Plasticized Polyvinyl Chloride) (Schedule-40 / Schedule-80)/ CPVC Pipe (Chlorinated Poly Vinyl Chloride) / GI Pipes) pipes of approved ISI quality Below Ground Level 25mm dia GI pipe |
| 240 | WS-Ex-DBW-HRDrilling of (150mm) vertical bores in hard rock area to any required depth as desired by TNPHC officials including labour charges for grouting the casing pipe after inserting the casing pipe in the drilling hole etc., Upto 150mm dia |
| 241 | from 150mm dia to 180mm |
| 242 | from 180mm dia to 210mm |
| 243 | WS-Ex-PVC EC-160supplying and fixing of 160mm dia pvc end cap for borewell casing pipe of approved brand etc., |
| 244 | FA-SO P-O G-kWpSOLAR PV PLANT On Grid Solar PV Plant comprising of: i) Solar panels of type Mono Crystline, PERC, etc. ii) Power Conditioning Unit (PCU)with MPPT, Inverter, Controls, Protection Devices, Interconnecting D.C. cables, Connectors, Junction Boxes and accessories. iii) D.C. D.B iv)A.C. D.B v) A.C. cables and accessories. vi) Lightning arrestor, earthing, etc. vii) Module Metallic Mounting Structures. viii) Installation, Testing and Commissioning corresponds to BIS and IEC requirements with 3 years warrenty:FA-SO P-O G-11-100 kWp11 kWp to 100 kWp |
| 245 | supplying and fixing of following size Numbering and letter including and labour for fixing etc., all complete 10\\"dia brass letters in Tamil |
| 246 | 10\\"dia brass letters in English |
| 247 | supplying and fixing of following size Emblem including and labour for fixing etc., all complete 15\\"dia Stainless steel Emblem |
| 248 | Steam Generator: Operated by LP gas including all materials etc., all complete |
| 249 | RICE COOKER-25 Kg CapacityCapacity 150 Ltrs. Operated by Steam. It is a cylindrical type vessel, fabricated with 16 Gauge 304 grade Stainless Steel Sheets, |
| 250 | MILK BOILER:Capacity 75 Litres. Operated by Steam. It is a cylindrical type completely jacketed double walled unit, fabricated with 16 Gauge 304 grade Stainless Steel Sheets. |
| 251 | IDLY COOKING UNIT:Capacity 300 Idlies per charge. Operated by Steam. It is a rack model unit, fabricated with 16, 18 & 20 Gauge 304 grade Stainless Steel Sheets. For Operational convenience, the unit is divided into 3 chambers and each chamber consists of 5 Nos. Idly Trays of 20 Idlies in each tray. |
| 252 | WORK TABLE WITH BS &MS-44”x24”x34”hThe Table Top is made of 16 gauge SS Sheets, middle and bottom shelf are fabricated with 18 Gauge 304 grade Stainless Steel Sheets and mounted on Stainless Steel Tubular Legs with adjustable nylon bullet feet |
| 253 | SINGLE BURNER RANGEOverall Size: 30” x 30” x 18” Height. Inner Frame is made of sturdy MS angles and the top is provided with heavy duty cast iron pan support. The remaining portion of the top is covered with 16 Gauge 304 grade Stainless Steel Sheets. All the 4 sides of the unit are given paneling with Stainless Steel Sheets. The unit is fitted with Stainless Steel Tubular Legs with Stainless Steel Tubular cross bracings and adjustable nylon bullet feet. The unit is fitted with 1 No. High Pressure LP Gas Burner, 1 No. Needle Control Valve and 1 No. Burner Pigtail Connection |
| 254 | DOSA MAKING UNIT-60”x30”x33”hThe base frame is made of sturdy MS angles and top is fitted with 20 mm thick tested steel plate for baking Dosa or Chappathi. The unit is provided with Stainless steel skirting with waste water drain trough on 3 sides at the top and the front portion facing the cook is given glass wool insulated Stainless steel front panel to avoid heat radiation. |
| 255 | ATTA KNEADER :Capacity 25 Kg. per charge of 15-20 minutes. Base Frame is made of Ms angles and steel sheets and painted. The unit is fitted with heavy duty reduction gear box, stainless steel heavy duty double arm and heavy gauge stainless steel mixing bowl, 2 HP three phase electrical motor and V-belts. |
| 256 | KNEADING TABLE WITH &MS-44”x24”x34”h+6”The Table Top is made of 16 gauge SS Sheets, middle shelf is fabricated with 18 Gauge 304 grade Stainless Steel Sheets and mounted on Stainless Steel Tubular Legs with adjustable nylon bullet feet |
| 257 | TILTING WET GRINDER-20 LtrsBody made of 20 SWG SS sheet and provided with gear box and 2 HP 3 phase motor |
| 258 | TILTING WET GRINDER -5 LrsBody made of 20 SWG SS sheet and provided with gear box and 0.5 HP single phase motor |
| 259 | VEGETABLE CUTTER: It is a compact unit provided with a set of sieves and blades (11 Nos.) suitable for slicing and cutting of various vegetables into cubes and slices. The unit is fitted with 0.5 HP Electrical Motor. |
| 260 | POTATO PEELER :15 Kg capacity. It is made of SS body provided with peeling chamber and rotary disc with fused Granules for peeling the potatoes. The unit is provided with 0.5 HP single phase Electrical Motor and SS Legs |
| 261 | WORK TABLE WITH BS &MS -60”x24”x34”hThe Table Top is made of 16 gauge SS Sheets, middle and bottom shelf are fabricated with 18 Gauge 304 grade Stainless Steel Sheets and mounted on Stainless Steel Tubular Legs with adjustable nylon bullet feet |
| 262 | WORK TABLE- 92”x44”x34”hThe Table Top is made of 16 gauge 304 grade SS Sheets, and mounted on Stainless Steel Tubular Legs with adjustable nylon bullet feet |
| 263 | PLATFORM TROLLEY-48”x30”x42”The base frame is made of sturdy MS angles and the platform is covered with 16 guage 304 grade SS Sheets. The trolley is provided with SS tubular handles and quality castor wheels. |
| 264 | Steam Pipeline Connections with “C” class Steel Pipes, SS Steam Valves, forged steel fittings and lagging with 6 mm dia asbestos rope and to connect the steam cooking equipment to the steam boiler |
| 265 | L.P.Gas Pipeline Connection with 6x2 Manifold, H.P.Regulator, cylinder pigtails, click on adopters, Pipes and fittings, main valves and other accessories |
| 266 | Fitting Charges for the kitchen items |
| 267 | Freight Charges for the kitchen items |
| 268 | NS-PAS-UnA-TCSupply and laying of ISI standard Unarmoured 0.50mm following Pair telephone Cable below ground level NS-PAS-UnA-TC2Pa) 2 Pair |
| 269 | NS-PAS-UnA-TC4Pb) 4 Pair |
| 270 | NS-PAS-UnA-TC20Pd) 20 Pair |
| 271 | NS-PAS-A-JTCSupply and laying of ISI standard Armoured 0.50mm following Pair Jelly filled telephone Cable below ground level NS-PAS-A-JTC-10Pa) 10 Pair |
| 272 | NS-PAS-A-JTC-20Pb) 20 Pair |
| 273 | NS-CCTV-AC-CSupply and Installation of Accessories for CCTV like connectors and cable including cost of materials and labour charges for fixing etc., all complete NS-CCTV-UALC-CAT-6e) CAT-6 -UNARMOURED LAN & CCTV CABLE |
| 274 | NS-CCTV-ALC-CAT-6f) CAT-6 - ARMOURED LAN & CCTV CABLE |
| 275 | NS-CCTV-OFC-6C Oh) 6 Core Outdoor -OFC CABLE |
| 276 | NS-CCTV-OFC-12C Ii) 12 Core Indoor -OFC CABLE |
| 277 | NS-CCTV-SW-PPoESupply and Installation of following Port PoE unmanaged switchs for CCTV IP camera including cost of materials and labour charges for fixing etc., all complete NS-CCTV-SW-4PPoE a) 4 Port PoE (Higher end) |
| 278 | NS-CCTV-SW-8PPoEb) 8 Port PoE (Higher end) |
| 279 | NS-CCTV-SW-24PPoEc) 24 Port PoE (Higher end) |
| 280 | NS-LAN-10/100/1000-PSupply and Installation of LAN Network Switches for following 10 / 100 / 1000 port with support for auto LAN WAN and support features like IP,QOS with accessories including cost of materials and labour charges for fixing etc., all complete NS-LAN-10/100/1000-8P-F-M-2L-1Ge) 8 Port Fully Managed 10 / 100 / 1000 Layer-2 with 1G Uplink (Higher end) |
| 281 | NS-LAN-10/100/1000-24P-F-M-2L-1Gf) 24 Port Fully Managed 10 / 100 / 1000 Layer-2 with 1G Uplink (Higher end) |
| 282 | NS-LAN-10/100/1000-48P-F-M-2L-1Gh) 48 Port Fully Managed 10 / 100 / 1000 Layer-2 with 1G Uplink (Higher end) |
| 283 | Supply, delivery and fixing of Outlet socket following made of aproved make (ISI) etc. to complete and as directed by the departmental officers.(Higher end)Socket RJ-45 |
| 284 | NS-LAN-PVC-MB-CAT 6Supply, delivery and Installtion of CAT 6 PVC Module Box with ISI mark etc., all complete (Higher end) |
| 285 | NS-PAS-FPS-FPSupply of Information Outlet socket following made of aproved make (ISI) with Back box & Face Plate, etc. to complete (Higher end)NS-PAS-FPS- SSa) Face Plate Single Socket RJ-45 |
| 286 | NS-PAS-FPS- DSb) Face Plate Dual Socket RJ-45 |
| 287 | NS-PAS-FPS-QSc) Face Plate Quad Socket RJ-45 |
| 288 | NS-CCTV-HD-TBSupply and Installation of following TB Hard Disk for NVR including cost of materials and labour charges (Higher end)NS-CCTV-HD-4TBb) 4 TB |
| 289 | NS-LAN-RA-USupplying and fixing of following RACK with accessories (POWER MANAGER Mounting accessories Etc.,) (Higher end)NS-LAN-RA-12Ue) 12U Rack |
| 290 | NS-LAN-RA-36Uf) 36U Rack |
| 291 | NS-LAN-RA-42Ug) 42U Rack |
| 292 | NS-LAN-PAC-LSupplying and fixing of following PATCH CORD with ISI mark including cost all materials and fixing labour charges etc., all complete (Higher end)NS-LAN-PAC-1mLa) 1 Metre Length |
| 293 | NS-EPABX-HY-IPSSupply,delivery and installation of following HYBRID IP EPABX SYSTEM & Telephone including cost of materials and labour charges for fixing etc., all complete NS-EPABX-HY-3T-112 IPa) 3 Trunk + 16 Analog Extensions. Expandable Up to 96 Analog Extension & 112 IP Port |
| 294 | NS-EPABX-Oph-24 Keyi) 24 Key Digital phone - Operator phone |
| 295 | NS-EPABX-Ex CL-8Pj) 8-Port Analog Extension Card with port License |
| 296 | NS-EPABX-B-Tel-Ph-WCIDk) Basic Telephone without Caller ID |
| 297 | NS-EPABX-B-Tel-Ph-CIDl) Caller ID Telephone with Speaker |
| 298 | NS-EPABX-Basic-IP Pho) Basic IP Phone |
| 299 | Supplying delivery and fixing of Network Switch, Network Accessories, Cables 16 Port Gigabit Unmanaged Network Switch with 2 SFP (Including Module & Pigtail) including all materials etc., all complete |
| 300 | NS-CCTV-Cam-IP BSupply and Installation of following MP fixed Bullet / Dome Network Color Camera with SD card support, High quality image with , 1/3 progressive scan.,Up to 30 m IR range.,PoE (Power over Ethernet) H.265+DWDR and IP 66-67 including cost of materials and labour charges for fixing etc., all complete NS-CCTV-Cam-4MP-IP Ba) 4MP IP Bullet / Dome Camera. |
| 301 | NS-CCTV-Cam-5MP-V IPc) 5MP Varifocal Motorized Dome IP Camera |
| 302 | Supplying delivery and fixing of IP CCTV CAMERA WITH POE, WDR, 80-Ch IP NVR Input, resolution up to 12MP, Dual RJ45 port, 8 SATA(up to 10TB), 2 HDMI&VGA, 2USB, Alarm I/O including all materials etc., all complete |
| 303 | Supply of Early Streamer Emission Air Terminal (ESEAT). Model: L The ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere. |
| 304 | Supply of Standard / Special Mounting Structure of height 4.5 mts. pipe, and 300 x 300 x 8mm MS plate, 3 mts. 48mm OD class C GI outer pipe,1.8 mtr, 38mm OD inner pipe, for roof mounting on concrete base and with FRP adapter |
| 305 | Supply of down conductor copper cable for lightning current dissipation etc all complete |
| 306 | Supply of Spark safe earthing electrode long life maintenance free etc all complete. |
| 307 | Installation charges for ESE lightning rod with all accessories |
| 308 | GS-W AMF-DG-125 KVASupply, installation, testing and commissioning of 125KVA Diesel Generator set with AMF panel of approved makes like Kirloskar / equivalent as per the new CPCB norms complete with all accessories like engine, alternator, batteries with leads, control panel, base frame, antivibration mounts, residential silencer, 200 liters fuel tank, intake and exhaust piping, fuel oil hand operated pump, other miscellaneous accessories for the total set including test trial run at load for 6 hours. (Including Supply of Diesel for Test run and consumable oil etc contractor scope.,) control wiring, annunciation etc., |
| 309 | GS-W AMF-DG-SilenInsulation for the residential silencer (supply of residential silencer to be included under item for DG Sets) etc., all complete complying with relevant standard specifications |
| 310 | Supply and installation of M.S. cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator |
| 311 | Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer complete with necessary supports, brackets etc. The supports shall have at intervals of not more than 2.5m. |
| 312 | Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool as per IS 3677 / 1973 reinforced with chicken mesh and cladded with aluminium sheet of 26 SWG and 50mm thick with 64 Kg/Cu. Mtr. Density |
| 313 | Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe to prevent rain water entry to exhaust pipe with provision of drain plug in the system. |
| 314 | GS-CEIG-DG-SCAPPROVAL FROM CEIG / CEA: Preparation of necessary drawings for DG sets for approval by Chief Electrical Inspector to Government / CEA, obtain approval for the same, arrange for the inspection by the Electrical Inspectorate / CEA Officials and obtain safety certificate from them for commissioning the DG set (This building is fed by HT power supply) etc., |
| 315 | NS-PAS-AMP-PASupply delivery and Installation following Two Zone PA Amplifier and wide range of power with ISI mark etc., all completeNS-PAS-AMP-120Wa) PA Mixer Amplifier 120W |
| 316 | NS-PAS-SPKR-W-CSupply and Installation of following 2-way wall mount / Ceiling Speaker with ISI mark etc., all complete NS-PAS-W-SPKR-15Wa) Wall Speaker 15W |
| 317 | NS-PAS-Mic-CLMSupply and Installation of Cordless Mic UHF with ISI mark etc., all complete |
| 318 | NS-PAS-U/C-INSupply, delivery and Installtion of following Unit/Controller including all materials ISI mark etc., all complete NS-PAS-U/C-CUa) Chairman Unit |
| 319 | NS-PAS-U/C-CCc) Conference Controller |
| 320 | NS-PAS-Mic So-8 PinSupply and Installation of 8 Pin Conference Mic Socket with Modular Box and Front Plate with ISI mark etc., all complete |
| 321 | NS-PAS-SPKR C-Supply and laying of following (Shielded Copper,Unarmoured,Armoured ) speaker cable with PVC pipe and accessories etc., all complete NS-PAS-Cu-SPKR-C-2 C 1.5a) 2 Core 1.5 sq.mm Shielded Copper Speaker Wire |
| 322 | NS-PAS-Cu Con C -8 C 1.5Supply and laying of 8 Core 1.5 sq.mm PVC Copper Conference C cable with ISI mark etc., all complete |
| 323 | NS-PAS-Proj-LSupply and Installtion of following projector Model, Lumens with ISI mark etc., all complete NS-PAS-Proj-3600Lc) 3600 Ansi Lumens Projector, XGA (1024X 768 ) Resolution, Contrast Ratio: 20000:1 |
| 324 | NS-PAS-Mot S-SSupply and Installtion of following Motorized Screen with ISI mark etc., all complete NS-PAS-Mot S-10` x 8`c) 10` x 8` Motorized Screen |
| 325 | NS-PAS-HDMI -20mSupply and laying of 20 Metre HDMI Cable with ISI mark etc., all complete |
| 326 | NS-PAS-Proj C-3 C 1.5Supply and laying of following 3 Core 1.5 sq.mm. PVC Power Cable for Projector with ISI mark etc., all complete |
| 327 | NS-PAS-SPKR C-Supply and laying of following (Shielded Copper,Unarmoured,Armoured ) speaker cable with PVC pipe and accessories etc., all completeNS-PAS-A-SPKR-C-2 C 2.5e) 2 Core - 2.5 sq.mm Armoured Speaker Cable Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender