Tender For Repair Of Evm Ware House In Chaibasa Under Sadar Chaibasa Block
Tender Value
16.83 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
12 days left
EMD
34000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
West Singhbhum → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Evm Ware House In Chaibasa Under Sadar Chaibasa Block
BOQ
| Sl. No. | Item Description |
| 1 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I 5.8.18 |
| 2 | New work (Two or more coats applied @1.43 ltr / 10sqm. Over and including base coat of water proofing cement paint Snowcem Plus or equivalent applied @ 2.20 kg./10 sq.m. ) |
| 3 | Providing applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth copmlete .D.S. R. 13.26. |
| 4 | Providing 2 coats of SYNTHETIC ENAMEL PAINT of approved shade and make over STEEL SURFACE grills& railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I. 5.8.45 |
| 5 | Providing & Laying single layer of tar felt of standard make including cleaning the surface with bruses & cloth soaked in k oil laying 1st layer of tarfelt of hot bitumen a/r 1.5 kg . per M2 2nd layer of tar felt and 3rd layer of hot bitumin a/r 1kgper M2 . all complete as per building specification dirction of E/I.5.9.12 |
| 6 | Providing two coats of SYNTHETIC ENAMEL PAINT of approved shade and make over OLD WOODEN surface including cleaning the surface after removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification dirction of E/I.5.8.32 |
| 7 | Providing & fixing . 100 mm dia pipe D.S.R 7757 |
| 8 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer of 1st quality conforming to IS: 15622 of approved make in colours such as white lvory Grey Fume Red Brown laid on 20 mm thick cement mortar (1:4) jointing with grey cement slurry @ 3.3 kg/sqm including pointed the joint with white cement and matching pigment etc. complete including cost of curing, taxes and royalty as per building specification Engineer in charge DSR 11.37 |
| 9 | Providing & fixing on wall face unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socket ed pipes. 110 mm dia D.S.R 12.41.2 |
| 10 | SHOE - 110MM DSR 12.42.62 |
| 11 | Coupler - 110 MM DSR 12.42.1.2 |
| 12 | BEND - 110 MM DSR 12.42.5.2 |
| 13 | Providing and placing on terrace ( at all floor levels ) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (SINTEX, ELECTROPLAST, STAR, LOTUS OR EQUIVALENT having valid I.S.I. licence). DSR 18.48 |
| 14 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled devicde (handle lever), conforming to IS:7231, parryware/Hindware/with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid.D.S.R 17.2.1 |
| 15 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap, 10 litre low level white P.V.C. Flushing cistern with munally controlled device (handle lever) conforming to IS:7231 Parryware/ Hindware with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.17.1.1 White Vitreous China Orissa pattern W C pan of size 580 X 440 mm with integral type foot rest. |
| 16 | Providing and fixing C.P. brass bib cock of approved conforming to IS 8931 18.49.1 15mm nominal bore approved brand C.P. fittings |
| 17 | Providing and fixing C.P.brass long body bib cock of approved quality conforming to standard and weight not less thain 690gms.18.51.1 |
| 18 | Providing and fixing C.P Soap Dish Holder having length of 138 mm breadth 102 mm, height of 75mm with concealed fitting arrangements, weighing not less than 110 gms 18.65 |
| 19 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings18.53. |
| 20 | Providing and fixing C.P. extentsion Nipples 15mm size with 12” BSP threads, 70mm length and 30 mm bredth and weight not less than 18gms 18.75.1 |
| 21 | Providing and fixing Mirror thickness required shape and size with plastic moulded frame of approved make and shade with 6mm thick Aluminum.17.32.2 |
| 22 | Providing and fixing Wash basin with C.I/M.S brackets, 15mm C.P. pillar cock 32mm C.P brass waste of cutting and making good the wtherever require. 17.7 Falt back wash basin size550x400mm with single 15mm pillar tap17.7.3. |
| 23 | Providing and fixing unplasticised P.V.C. connection pipe with c.p. nuts collar and bush of approved quality.18.74.2 15 mm nominal bore with 45 cm length. |
| 24 | Providing And fixing 32 mm waste pipe for sink or wash basin including P.V.C. waste fittings complete.17.28.2.1 Flexible Pipe |
| 25 | provding and laying of 110mm dia. P.V.C. pipe for outlet of water to outlet drain including all accessories ,I.e lubricants, solventcement, clamp, ring, sockets etc.(SUPREME S.W.R.)M.R. |
| 26 | Providing and fixing PVC Pipe fittings with all accessories (supreme make)MR. i) 110 mm Plaine Tee (Supreme) P.V.C.12.42.4.2 |
| 27 | ii) 110 mm Door Tee (Supreme) P.V.C.12.42.3.2DSR |
| 28 | iii) 110 mm Plaine Bend (Supreme) P.V.C.12.42.5.2DSR |
| 29 | iv) 110 mm Door Bend (Supreme) P.V.C. |
| 30 | v) 110 mm 45 degree offset (Supreme) P.V.C. |
| 31 | vi) 110 mm Cowel (Supreme) P.V.C. |
| 32 | vii) 110 mm Plaine Trap (Supreme) P.V.C. |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL)18.8 Concealed work including cutting chases and making good the wall etc. 15mm dia.18.8.1 |
| 34 | 20mm dia18.8.2 |
| 35 | Exposed on Wall 25mm dia18.9.3 |
| 36 | 32 mm dia.18.9.4 |
| 37 | 40mm dia.18.9.5 |
| 38 | Supplying 100 mm dia Submersible pump sets confirming to 8034 and motor confirming to IS: 9283 pump shell be suitable for various delivery head and discharge with stainless steel pump sheft and polypropylene/ noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/ fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/ double run shell be provided with each pump. Submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 2HP S.Pump.19P.P-66 IN M-1055 |
| 39 | Supllying and matarials with lobour for construction inspection chamber of designation class 75b brick deep 600x450 internal diamention having 250mm wall thickness in cement morter(1:6)including 12mm cement plaster (1:4)with punning on inside and cement plaster (1:6)with 600x450mm G.I. cover with frame (weight not less than 36k.g)in foundation and refilling all complete as per specification and direction of E/I. 3.3.8/ S.O.R. |
| 40 | Proving 250mm wide drain in cement mortar (1:6) with approved 150mm clear depth and 250mm apron including cost of earthwork involved with 75mm flat soling in proper in CM (1:3) with slope at the base the drain dily plastered in CM (1:6) with punning over exposed surface all complete as per building specification and direction of E/I 5.10.33 |
| 41 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) 5.1.10 |
| 42 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made bytable vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern. DSR 16.91.2 |
| 43 | Cement Concret Pavment (Construction of PCC M 20 in road construction using batching plant transit mixer and manual placing as per drawig and technical specification . Expansion joint @ 15.0M SOR ITEM NO 12.08 CASE(ii) ( B) P.C.C- M20 |
| 44 | Providing concertina wire single layer blade profile BTO -10 & 22 coil dia 600 mm ….do… E/I . NSI |
| 45 | CARRIAGE(A) Cement & steel |
| 46 | (b) Sand |
| 47 | c)Stone chips |
| 48 | G.S.T @ 18% |
| 49 | Labour Cess 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender