Tender For Upgradation, Extention & Modernization Of The Existing Auditorium Of Kanglei Mime Theatre Repertory At Langthabal Kunja, Imphal West, Manipur.
Tender Value
5.21 Crore
Estimated cost
Bid Submission
16 Oct 2026
17 days left
EMD
10.42 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Imphal West → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation, Extention & Modernization Of The Existing Auditorium Of Kanglei Mime Theatre Repertory At Langthabal Kunja, Imphal West, Manipur.
BOQ
| Sl. No. | Item Description |
| 1 | Theatre: - |
| 2 | Earthwork in excavation by mrchanical means (hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm on plan ) including getting out and disposal of excavated earth, lead upto 50 mt and lift upto 1.5 m as directed by th engineer in charge. All kind of soil |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc., in layers not exceeding 20mm in depth consolidating each deposited layer by ramming and watering and lead upto 50m and lift of 1.5m. |
| 4 | Supplying and filling in plinth with sandy soil under floors i/c watering, ramming, consolidating and dressing complete. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto Plinth Level. 1 : 4 : 8 ( 1 cement:4 coarse sand:8 graded stone aggt. 40 mm nominal size ) |
| 6 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size). |
| 7 | Extra for providing and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement. |
| 8 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 9 | Providing & Laying in position specific grade of reinforced cement concrete excluding the cost of centering,shuttering, finishing and reinforcement-All worksupto plinth level.-1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 10 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth lvl upto floor five lvl excluding the cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 ( 1 cem : 1.5 c/sand : 3 graded stone aggregate 20 mm nominal size ) |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral staircase above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 12 | Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete up to plinth level. (a) Thermo-Mechanically Treated bars. |
| 13 | Centering and shuttering including strutting, propping etc and removal of form for: (a) Foundation, footings, bases of columns etc. |
| 14 | (b) Lintels, beams, plinth beams, girders,bressurmers and cantilevers, with waterproof ply 12 mm thick. |
| 15 | (c) Columns, Pillars,Piers,Abutments, Posts and Struts . |
| 16 | (d) Suspended floors, roofs, landings, balconies and access platform, with water proof ply 12mm thick |
| 17 | (e) Stairs, (excluding landings) except spiral-staircases |
| 18 | Brickwork with 1st class common burnt clay FPS (non modular) bricks in foundation and plinth - cement mortar 1:4 (1 cement : 4 coarse sand) |
| 19 | Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in Cement mortar 1:4( 1 cem : 4 c / sand ) |
| 20 | Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for seperately.- a) Local best quality Teak wood. |
| 21 | Providing and fixing panell or panelled and glazed shutter for doors, windows and clerestory windows including ISIS marked MS butt hinges of required size with necessary screws excluding panelling which will be paid for seperately, all complete as per direction of engineer in charge.- a) Local best quality Teak wood - 35 mm thick shutters |
| 22 | Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, squre or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/wooden frames with rawl plugs screws etc. |
| 23 | Providing 40x3 mm flat iron hold fast 40 cm long i/c fixing to frames with 10 mm dia bolt nuts & wooden plugs & embedding to cement concrete block 30x10x15 cm 1:3:6 (1 cement: 3 coase sand: 6 stone aggregate 20 mm nominal gauge) |
| 24 | Providing & fixing bright finished brass casement window fastener with necessary screws etc. complete. |
| 25 | Providing & fixing brass tower bolts (barrel type) with screws etc. complete. (a) 250x10 mm |
| 26 | Providing & fixing brass handles with necessary screws etc. complete (a) 125 mm |
| 27 | Providing and fixing precoated galvanised iron profile sheet ( size, shape and pitch of corrugation as approved by Enginner-in-charge) with zinc coating of 120 grams per sqmt as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 micron. Shet sholuld have protective guard film of 25 micron minimum to avoid scratces during transportation and should be supplied in single lenfth upto 12 mt or as desired by engineer in charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal / vertical or curve surface, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with. (a) precoated galvanised iron profile sheets 0.50 mm thick |
| 28 | Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel arade, 5-7 microns epoxy primer on both side of the sheet and Dolvester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L'hooks, bolts and nuts and or GL. seam bolts and nuts, G.!. plain and bitumen washers Complete: Ridges Plain (500-600mm). Precoated Galvanised iron profile sheets 0.50mm thick. (a) Ridges plain (500-600mm) |
| 29 | (b) Gutter (600mm over) Precoated galvanised iron profile sheets 0.50 mm thick |
| 30 | Steel work in built up tubular (round, square or rectangular tubes etc.) trusses et., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete.- Hot finished welded type tubes. |
| 31 | 52 mm thick cement concrete flooring with concrete hardener topping under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement harderner mix: 2 graded stone aggregate 6 mm nominal size) by volume hardening compound is mixed @ 2 litre per 50 kg of cement or as per manufacturers specificatios. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 32 | Cement plaster skirting (upto 30 cm height) with cement morter 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. 18mm thick |
| 33 | Providing & fixing sainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 34 | Providing & laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacture) of 1st quality conforming IS :15622 of approved make in all colours, shades, except white, lvory, Grey, Fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc. complete. |
| 35 | Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with: Makrana white second. |
| 36 | Tile work in skirting, risers of steps and dado (upto 2m hight) over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished) Raj Nagar. 8 mm thick. |
| 37 | Extra for prefinished nosing to treads of steps of marble stone. |
| 38 | Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections, power pressed from M.S sheet and galvanised with zinc coating of 120 gms/sqm (both sided inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm at 120mm centre to centre one flange fixing to the ceiling with dash fastener 12.5mm diax50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x25x0.55mm of required length with nuts and bolts of required size and the other end of the angle hanger fixed with intermediate G.I channels 45x15x0.9mm running at the spacing of 1200mm centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre, shall ber fixed in a direction perpendicular to G.I intermediate channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixing to wall/partition with the help of rawl plugs at 450mm centre, with 25mm long drive-all screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flish finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compund in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacture's specification and also including the cost of making openings for light fitting, grills, diffusers, cutouts made with frame of perimeter channels suitably fixing, all complete as per drawings, and specification and direction of the Engineer in charge but excluding the cost of painting with: 12.5mm thick tapered edge gypsum fire resistant board conforming to IS: 2095-Part I, |
| 39 | 12mm Cement Plaster of mix 1:4 (1cement: 4 find sand) |
| 40 | 15mm Cement Plaster on rough side of single or half brick wall mix 1:4 (1cement: 4 find sand) |
| 41 | 15mm Cement Plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand)mix 1:4 (1cement: 4 find sand) |
| 42 | 6mm cement plaster of mix: 1:3 (1 cement: 3 find sand) |
| 43 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over ansd including priming coat of whiting to give an even shade. |
| 44 | Finishing walls with water proofing cement paint of required shade: new work (two or more coats applied @ 3.84 kg/10 sqm) |
| 45 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer. |
| 46 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even smooth complete. |
| 47 | Applying ready mixed priming coat:- With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/litre. |
| 48 | Painting wood work with Deluxe Multi surface paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10sqm of approved brand or manufacture. |
| 49 | Providing and fixing 20mm plank as eave board with Uningthou wood. |
| 50 | Water Reservoir and Septic Tank: - |
| 51 | Earthwork in excavation by mrchanical means (hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm on plan ) including getting out and disposal of excavated earth, lead upto 50 mt and lift upto 1.5 m as directed by th engineer in charge. All kind of soil |
| 52 | Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc., in layers not exceeding 20mm in depth consolidating each deposited layer by ramming and watering and lead upto 50m and lift of 1.5m. |
| 53 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto Plinth Level. 1 : 3 : 6 ( 1 cement:3 coarse sand:6 graded stone aggt. 40 mm nominal size ) |
| 54 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral staircase above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 55 | Providing & Laying in position specific grade of reinforced cement concrete excluding the cost of centering,shuttering, finishing and reinforcement-All worksupto plinth level.-1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 56 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth lvl upto floor five lvl excluding the cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 ( 1 cem : 1.5 c/sand : 3 graded stone aggregate 20 mm nominal size ) |
| 57 | Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete up to plinth level. (a) Thermo-Mechanically Treated bars. |
| 58 | Centering and shuttering including strutting, propping etc and removal of form for: (a) Foundation, footings, bases of columns etc. |
| 59 | (b) Suspended floors, roofs, landings, balconies and access platform, with water proof ply 12mm thick |
| 60 | (c) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 61 | Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in Cement mortar 1:4( 1 cem : 4 c / sand ) |
| 62 | Brickwork with 1st class common burnt clay FPS (non modular) bricks in foundation and plinth - cement mortar 1:4 (1 cement : 4 coarse sand) |
| 63 | 15mm Cement Plaster on rough side of single or half brick wall mix 1:4 (1cement: 4 find sand) |
| 64 | Providing and fixing G.I pipes complete with G.I fittings including trenching and refilling etc. External work 80mm nominal outer dia pipes |
| 65 | Providing and fixing chorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plan & brass threaded fitting this includes jointing of pipes & fitting with one step CPVC solvent cement, trenching, refilling & tyesting of joints complete as per direction of Engineer in charge. External work. 32 mm norinal outer dia pipe. |
| 66 | Providing and fixing Motor pump (1H.P) i/c fitting. |
| 67 | Provision for water Supply and Sanitary Installation: - |
| 68 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests. |
| 69 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 70 | Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern. including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar taps |
| 71 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I trap with outlet grating and other couplings inC.P brass, including painting of fittings and cutting and making good the walls and floors wherever required : a) Single half stall urinal with 5 litre P.V.C automatic flushing cistern. |
| 72 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I/PVC flish pipe for back and front flush with standrad spreader pipes with fittings, G.I clamps and C.P brass couling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : a) Single half stall urinal with 5 litre P.V.C automatic flushing cistern |
| 73 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete. Flexble Pipe a) 32mm dia |
| 74 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 75 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. A) 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 76 | Providing and fixing toilet paper holder: C.P. brass |
| 77 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 m high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 78 | P/F C.P. brass bib cock of approved quality conforming to IS 8931 (a)15mm nominal bore |
| 79 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (a)15mm diameter. |
| 80 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : a) 25mm nominal bore |
| 81 | Providing and fixing gun metal non-return valve of approved quality (screwed end) :a) 25mm nominal bore Vertical code |
| 82 | Cutting holes up to 15x15 cm in R.C.C floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2;4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 83 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with One step CPVC solvent cement and the cost of cutting chases and direction making good of Engineer the same in Chargeincluding testing of joints complete as per Concealed work, including cutting chases and making good the wall etc a)32 mm nominal outer dia Pipes |
| 84 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with One step CPVC solvent cement and the cost of cutting chases and direction making good of Engineer the same in Chargeincluding testing of joints complete as per Concealed work, including cutting chases and making good the wall etc a) 62.50 mm nominal outer dia Pipes |
| 85 | Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length: 20 mm nominal bore |
| 86 | Providing and placing on terrance (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and the base support for tank. |
| 87 | Land Development: - |
| 88 | Earth work in rough excavation, banking excavated eart in layers not exeeding 20 cm in depth, breaking clods watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5m : All kinds of soil. |
| 89 | Boundary Wall: - |
| 90 | Earthwork in excavation by mrchanical means (hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm on plan ) including getting out and disposal of excavated earth, lead upto 50 mt and lift upto 1.5 m as directed by th engineer in charge. All kind of soil |
| 91 | Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc., in layers not exceeding 20mm in depth consolidating each deposited layer by ramming and watering and lead upto 50m and lift of 1.5m |
| 92 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto Plinth Level. 1 : 4 : 8 ( 1 cement:4 coarse sand:8 graded stone aggt. 40 mm nominal size ) |
| 93 | Providing & Laying in position specific grade of reinforced cement concrete excluding the cost of centering,shuttering, finishing and reinforcement-All worksupto plinth level.-1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 94 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth lvl upto floor five lvl excluding the cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 ( 1 cem : 1.5 c/sand : 3 graded stone aggregate 20 mm nominal size ) |
| 95 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral staircase above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 96 | Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete up to plinth level. (a) Thermo-Mechanically Treated bars. |
| 97 | Centering and shuttering including strutting, propping etc and removal of form for: (a) Foundation, footings, bases of columns etc. |
| 98 | (b) Lintels, beams, plinth beams, girders,bressurmers and cantilevers, with waterproof ply 12 mm thick. |
| 99 | (c) Columns, Pillars,Piers,Abutments, Posts and Struts . |
| 100 | Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in Cement mortar 1:4( 1 cem : 4 c / sand ) |
| 101 | Structural steel work in single section fixed with or without connecting plate including cutting, hosting, fixing in position and applying coat of approved steel primer all complete. |
| 102 | 12mm Cement Plaster of mix 1:4 (1cement: 4 find sand) |
| 103 | 15mm Cement Plaster on rough side of single or half brick wall mix 1:4 (1cement: 4 find sand) |
| 104 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer. |
| 105 | Finishing walls with water proofing cement paint of required shade : New work (two or more coats applied @ 3.84 kg/10 sqm) |
| 106 | Supplying and fixing galvanised steel barded wire weighing 9.38kg/100 m straining and fixing to any type of standard rail straining bolts i/c securing with and provision of galvanised mild steel wire, staples or steel pins etc as directed. |
| 107 | Gate & Security room: - |
| 108 | Earthwork in excavation by mrchanical means (hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm on plan ) including getting out and disposal of excavated earth, lead upto 50 mt and lift upto 1.5 m as directed by th engineer in charge. All kind of soil |
| 109 | Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc., in layers not exceeding 20mm in depth consolidating each deposited layer by ramming and watering and lead upto 50m and lift of 1.5m. |
| 110 | Supplying and filling in plinth with sandy soil under floors i/c watering, ramming, consolidating and dressing complete. |
| 111 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto Plinth Level. 1 : 4 : 8 ( 1 cement:4 coarse sand:8 graded stone aggt. 40 mm nominal size ) |
| 112 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size). |
| 113 | Extra for providing and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement. |
| 114 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 115 | Providing & Laying in position specific grade of reinforced cement concrete excluding the cost of centering,shuttering, finishing and reinforcement-All worksupto plinth level.-1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 116 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral staircase above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 117 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth lvl upto floor five lvl excluding the cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 ( 1 cem : 1.5 c/sand : 3 graded stone aggregate 20 mm nominal size ) |
| 118 | Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete up to plinth level. (a) Thermo-Mechanically Treated bars. |
| 119 | Brickwork with 1st class common burnt clay FPS (non modular) bricks in foundation and plinth - cement mortar 1:4 (1 cement : 4 coarse sand) |
| 120 | Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in Cement mortar 1:4( 1 cem : 4 c / sand ) |
| 121 | Centering and shuttering including strutting, propping etc and removal of form for: (a) Foundation, footings, bases of columns etc. |
| 122 | (b) Suspended floors, roofs, landings, balconies and access platform, with water proof ply 12mm thick |
| 123 | (c) Columns, Pillars,Piers,Abutments, Posts and Struts . |
| 124 | (d) Lintels, beams, plinth beams, girders,bressurmers and cantilevers, with waterproof ply 12 mm thick. |
| 125 | Steel work welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint. (a) Ingrating, framed guard bars, ladders, railings, brackets and similar works. |
| 126 | Structural steel work in single section fixed with or without connecting plate including cutting, hosting, fixing in position and applying coat of approved steel primer all complete. |
| 127 | Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for seperately.- a) Local best quality Teak wood. |
| 128 | Providing and fixing panell or panelled and glazed shutter for doors, windows and clerestory windows including ISIS marked MS butt hinges of required size with necessary screws excluding panelling which will be paid for seperately, all complete as per direction of engineer in charge.- a) Local best quality Tolhao wood - 35 mm thick shutters |
| 129 | Providing 40x3 mm flat iron hold fast 40 cm long i/c fixing to frames with 10 mm dia bolt nuts & wooden plugs & embedding to cement concrete block 30x10x15 cm 1:3:6 (1 cement: 3 coase sand: 6 stone aggregate 20 mm nominal gauge) |
| 130 | Providing & fixing brass tower bolts (barrel type) with screws etc. complete (a) 250x10 mm |
| 131 | Providing & fixing brass handles with necessary screws etc. complete (a) 125 mm |
| 132 | Providing & laying rectified Vitrified tiles in floor in different size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size. Size of tile 600x600mm |
| 133 | Providing & fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 )thickness to be specified by the manufacture of approved make in all colours, shade except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 134 | 12mm Cement Plaster of mix 1:4 (1cement: 4 find sand) |
| 135 | 15mm Cement Plaster on rough side of single or half brick wall mix 1:4 (1cement: 4 find sand) |
| 136 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer. |
| 137 | Finishing walls with water proofing cement paint of required shade: new work (two or more coats applied @ 3.84 kg/10 sqm) |
| 138 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even smooth complete. |
| 139 | Applying ready mixed priming coat:- With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/litre. |
| 140 | Applying ready mixed priming coat:- With ready mixed red oxid zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:- |
| 141 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth |
| 142 | Common Parking: - |
| 143 | Earthwork in excavation by mrchanical means (hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm on plan ) including getting out and disposal of excavated earth, lead upto 50 mt and lift upto 1.5 m as directed by th engineer in charge. All kind of soil |
| 144 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto Plinth Level. 1 : 4 : 8 ( 1 cement:4 coarse sand:8 graded stone aggt. 40 mm nominal size ) |
| 145 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto Plinth Level. 1 : 3 : 6 ( 1 cement:3 coarse sand:6 graded stone aggt. 40 mm nominal size ) |
| 146 | Centering and shuttering including strutting, propping etc and removal of form for: (a) Foundation, footings, bases of columns etc. |
| 147 | Supplying and Installation of Global solution Auditorium Chair with arms (Natural, Gs06) |
| 148 | IEI: - |
| 149 | Wiring for light point /Fan point /exhaust Fan point /call bell point with 1.5mm2 PVC insulated copper conductor single core cable in PVC casing & capping with modular type switch, modular plate suitable size G.I box and earthing the point with 1.5mm2 PVC insulated copper conductor single core cable etc. as reqd. |
| 150 | 1. Group A |
| 151 | 2. Group B |
| 152 | 3. Group C |
| 153 | Wiring for light point/power plug with 2x4mm2 PVC insulated copper conductor single core cable in PVC casing & capping along with 1 no. 4mm2 PVC insulated copper conductor single core cable for loop earthing etc. as reqd. |
| 154 | Wiring for circuit/sub-main wiring along with earth wire with (the following size of) PVC insulated copper conductor single core cable in PVC casing & capping etc. as reqd. |
| 155 | 1. 2x1.5mm2 + 1x1.5mm2 earth wire. |
| 156 | 3. 2x4mm2 + 1x4mm2 earth wire. |
| 157 | Supplying and fixing (following piano type switch/socket) on the existing switch board/ cover i/c connection etc as reqd. |
| 158 | 3 pin 5/6 amps socket outlet |
| 159 | 5/6 amps switch |
| 160 | 6 pin 15/16 amps socket outlet |
| 161 | 15/16 amps switch |
| 162 | P/F 400mm dia Wall mounting fan complete with all accessories i/c connection as reqd. |
| 163 | S/F 380 Sweep exhaust fan complete with all accessories i/c connections as reqd. |
| 164 | S/F Star Param Recessed backlit panel round LED 15 W Crompton |
| 165 | Supply of Indoor LED par 54 LED Par 200W, Voltage- 110V-250V/ 50-60Hz,lamp-TX high power LEDs; 3W x54 LED, 4 in 1 LED working position; LED Display,channel -4/5/7 CHS, Beam Angle-15/25/45/600, IP Grad-IP20, control mode-master/slave synchronization, DMX-512 control and automatic run function,Construction-Aluminium and plastic body,silver,white and black optional Make: TDH Lighting/DLMC/PLS |
| 166 | Supply of LED cube par 200W High Quality LED Parcan Light complete with, Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 95 DmX 512 dimming with 3 channel control Beam Angle of 12°/25°/45° Total Power Consumption of 165W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv & Film Cameras 11.7KHz Refresh Rate, Linear Dimming 0 – 100%Fuse and Internal safety protections Strobe option Adjustable 1-25 times/Sec Variable Fixture speed with Yoke of Manual Adjustment 3 Pin XLR for Dmx black powder coated body. Make: TDH Lighting/DLMC/PLS |
| 167 | Supply of 200W LED Fresnel Light having 3200K colour temperature High quality uniquely designed Fresnel Lens CRI,TLCI and R9 value above 96 LED COB based Source No Multiple Shadows – Single Source illumination Total Power Consumption of 210W Linear dimming 0 – 100% Adjustment Flicker Free for High FPS, Power AC90-260V, 50/60Hz Working Temperature +40° – -30° Active Cooling with Low Noise Fan Dmx Control/3pin xlr Black powder coated fabricated housing with normal yoke. Make: TDH Lighting/DLMC/PLS |
| 168 | Supply of LED Spot light 200W Flicker free LED Light Source: 1pcs 200watt COB LED (W/W/C/W) Zoom: DMX control Lamp average life time: 50,000 hours DMX Channel: 2 / 3 / 4 channel Control Mode: DMX512, software (connect to computer), manual control Dimmer: 100% linearly adjustable Angle: 15°-50° Voltage: AC90-260V 50/60Hz Power: 200W Working Environment: indoor -20°C 40°C IP Rate: IP20 Make: TDH Lighting/DLMC/PLS |
| 169 | Supply of led Profile spot 26\\" ULTRA BRIGHT specification Voltage: AC90-240V, 50/60Hz Power Consumption: 200W LED : 200W Warm White / 2 in 1 / 4 in 1 In Service Life: 60000 hours Lens Angle: 19/26/36° Optional Dimmer : 0-100% Linearly Adjustable Ambient Temperature: -25°C -45°C Control Signal DMX 512,Master-Slave, Sound, Auto/Control Channel : 1/3CH Single colour, 2/5CH (2in1)N.W 6 kg, G.W 7kg Dimensions 450280mm Packing Size 605300*300mm Make: TDH Lighting/DLMC/PLS |
| 170 | Supply of LED Blinder 4way 4x100w Voltage : AC90V - 245V Frequency : 50-60HzPower Consumption : 450W Light Color : White or warm White LED Control : Individual Controllable Lifetime : 60,000 hours DMX Channel : 6/12/2CHColor Temp : 2500K / 3200K / 6500K Warm White : 5600K - 6400K Cool White 2800K - 3200K Dimmer : 0-100% Linear Adjustable Beam Angle : 38 Degree Working Temperature : -30°C-50°C Control Mode DMX512, Master / Salve, Auto Run, Stand alone, Sound Active Strobe Effect : Variable Speed (1-30Hz) House Material : Metal House Color : Black IP Grade : IP20 Weight : 5.5 kg Make: TDH Lighting/DLMC/PLS |
| 171 | Supply of LED cyclorama light Source 18PCS 12W 4IN1 LEDs Lens angle : 25°(30°, 45°, 60° optional) Channel mode : 3 / 4 / 6 / 7 / 9DMX channel mode 0-100% linear dimmer Function: color mix, automatic color change, built in program and strobe effect with adjustable speed Sound controlled via built-in microphone Adjustable sound sensitivity LED Display, easy to control : auto, sound, active, DMX512, software(connect to computer) Overheating protection Voltage : 100-220V 50/60hz Power : 230W IP rating : IP20Make: TDH Lighting/DLMC/PLS |
| 172 | Supply of Digital Light Controller 1.Independent Intellectual Property Rights, Possessing Appearance Patents,Computer Copyright Registration Certificates, With CE, ROHS and related Test Reports. 2. Linux System, quad-core 64bit ARM processor. 3. 4 DMX512 Output, 2048 Channels. Can Expand to 8 DMX512 Output, 4096 Channels 4. Supports Multiple Formats Library: R20, D4 and xml 5. Art-Net Port 6. 10.4\\" TFT-LCD Capacitive Touch Screen 7. Built-in Multiple Language, Support Customized 8.12 Executor faders+8 Preset Faders, 100 Pages.Save MAX 1200 Playbgrak Program, run 20 programs simultaneously 9. 4 High-precision Photoelectric Encoder Wheels with Backlight 10.With Vector Light Layout Function, Simulating on-site Layout and Emission 11.Support for creating workspaces and quickly accessing interface 12.Supports naming functions such as text, handwritten graffiti, and outline color 13.Time code supports internal player, external MIDI, LTC time code triggering 14.Built-in music player, compatible with MP3,WAV, FLAC and APE 15.Independent CMY or RGB color mixing system 16.MAX 1000 fixtures and 600 fixture group 17.MAX 600 material and can be classified 18.MAX save 1000 lighting program 19.Support remote software update Make: TDH Lighting/DLMC/PLS |
| 173 | Supply of PLS 380W SHARPY with Out of light lens diameter: 155mm, Expected life of lamp bulbs: 2000 hours, Color temperature: 7800K, Voltage: AC100-240V 50/60Hz, X-axis/Y-axis: 16 bit precision scanning; photoelectric reset system is used for horizontal and vertical direction of X-axis 540° and Y-axis 270°. Accidental collision error can be automatically retrieved and reset, Color disc: One fixed color disc; a total of 13 kinds of colors (including white); the two-way rainbow effect can achieve half-color, panchromatic, single and double color gradient and slow motions in positive and negative directions. It also has Hall, magnet positioning and automatic error correction function in any angle. Make: TDH Lighting/DLMC/PLS |
| 174 | Supply of Cable Tray 40 x100 x16swg painted. (Customised) |
| 175 | Supply of Light socket box 4\\"x4\\" with 15 Amp multi socket Anchor/Dimond (Customised) |
| 176 | Supply of Side Light Ladder of 25mm x 50mm M.S.tube size (6'x2') Make : Customised |
| 177 | Supply of DMX Splitter 1 in 10 out the XLR connectors are mounted directly on the board.2. Connectors can be on the front or on the back. 3. Daisy chain of the input signal.4. Switch for DMX line termination.5. In 1 to 10 unit, Make: TDH Lighting/DLMC/PLS |
| 178 | Supply of DMX cable 20/0.12BC+PE1.8, for stage to control room(PLS/FBT/TASKER) or eq. |
| 179 | Supply of 6mm2 3 core PVC/XLPE insulated heavy duty armoured cable 1.1 KV grade |
| 180 | Supply of Customised MCB box having facility to connect the 58 nos,light point, with 58 MCB 25Amp & 1 Isolator 100Amp RYB Indicator frequency meter,Volt meter etc. Make: Custom |
| 181 | Supply of DMX point box Make: Custom |
| 182 | Supply of 50mm OD G I Pipe B.Class for lighting grid & lighting bar to be hang from top with support of 40x40x5mm M.S.Angle.(Make:- JINDAL/TATA/) or eq. |
| 183 | Earthing with copper plate 600 mm x 600 mm x 6 mm thick i/c accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.(but without charcoal or coke and salt) as reqd |
| 184 | Extra for using salt and charcoal for G.I or copper plate earth electrode as reqd. |
| 185 | P/L earth connection from earth electrode with 4 mm dia copper wire in 15 mm dia G.I pipe as reqd. |
| 186 | P/F 250 amp.TPN stand ground on load change overswitch (Compact design) 415/500 V including connection etc as reqd. |
| 187 | Fire Fighting |
| 188 | Spot Light: - |
| 189 | PC (Plano Convex) |
| 190 | Halogen Fresnel |
| 191 | PAR 64. |
| 192 | PAR 62. |
| 193 | Profile (HPL) |
| 194 | SH. Beam 5R |
| 195 | Batten Light ( CHAUVET Professional) |
| 196 | Smoke Machine |
| 197 | 201500011Fog Machine |
| 198 | HZ - 400 Professional Haze Machine |
| 199 | Console |
| 200 | Avolit 2020 |
| 201 | Mini Avolit 2020 |
| 202 | Stand |
| 203 | 8ft Lighting stand |
| 204 | 10ft Lighting stand |
| 205 | Heavy duty 14ft Lighting stand |
| 206 | Generators |
| 207 | 35 KVA Silent Diesel Generator |
| 208 | Honda Portable 3 KVA silent Generator |
| 209 | Air Conditioning System: - |
| 210 | Supply, installation, testing and commissioning of following type AC i/c connection etc.as reqd. |
| 211 | 1. 1.5 Ton |
| 212 | 2. 2 Ton |
| 213 | Supply, installation, testing and commissioning of Air Cooler 95 L Capacity i/c connection etc. as reqd. |
| 214 | S/F 48\\"Sweep (1200mm) A.C Ceiling fan i/c connections as reqd. |
| 215 | Installation of Sound System: - |
| 216 | Supply and fixing of PX 10 power amplifier i/c connection etc. as reqd. |
| 217 | Supply and fixing of Mpro DR3 amplifier i/c connection etc as reqd. |
| 218 | Supply and fixing of alto speaker tx-315 i/c connection etc as reqd. |
| 219 | Supply and fixing of studio Master monitor speaker i/c connection etc. as reqd. |
| 220 | Supply and fixing of mixer MG-16 XU i/c connection etc. as reqd. |
| 221 | Supply and fixing of SHURE SM-58 Microphone i/c coonection etc. as reqd. |
| 222 | Supply and fixing of SHURE SM-57 Microphone i/c coonection etc. as reqd. |
| 223 | Supply and fixing of Hawk Microphone Stand . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender