Tender For Addn / Altn And special Repair Of Street Light And Connected Works At Nad Dollygunj And Requirement Of Installation Of Automatic Opening And Closing System For Main Entrance At Sdc / Ncn Under Age E/M-Ii Of Ge Minniebay, Sri Vijaya Puram (
Tender Overview
Project Description
Tender for Addn / Altn And special Repair Of Street Light And Connected Works At Nad Dollygunj And Requirement Of Installation Of Automatic Opening And Closing System For Main Entrance At Sdc / Ncn Under Age E/M-Ii Of Ge Minniebay, Sri Vijaya Puram (8861/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in soft / loose soil not exceeding 1.5 mtr wide and n exc 1.5 mtr depth and getting out incl forming of bottom for laying UG cabe complete all as specified and directed. |
| 2 | Returning filling using excavated soil including spreading levelling, watering and well ramming in layers n exc 25 Cm as in soft / loose soil complete all as specified and directed. |
| 3 | Removal of surplus excavated material (soil of any type) n.exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtrs above the starting point complete all as specified and directed. |
| 4 | Supplying and laying of GI tubing light grade for cable protection in trenches/duct/fixing to pole/wall or in such similar position of 50 mm dia complete all as specified and directed. |
| 5 | Taking up old unserviciable LT UG cables from trench/poles/wall etc of 16 Sqmm 2 Core complete all as specified and directed. Note : Excavation, returning filling and removal of surplus soil shall be measured and paid separately under relevant item of this schedule |
| 6 | Taking up old unserviciable LT UG cables from trench/poles/wall etc of 25 Sqmm 3.5 core complete all as specified and directed. Note : Excavation, returning filling and removal of surplus soil shall be measured and paid separately under relevant item of this schedule. |
| 7 | Taking up old unserviciable LT UG cables from trench/poles/wall etc of 35 Sqmm 3.5 core complete all as specified and directed. Note : Excavation, returning filling and removal of surplus soil shall be measured and paid separately under relevant item of this schedule. |
| 8 | Supply and laying LT UG cable XLPE insulated armoured and PVC sheathed 1100 volts grade with aluminium conductor of 16 Sqmm 4 core with cable lugs including takeing down old unserviceble cables complete all as specified and directed. Note : Earth works excavation, returning filling, removal of surplus soil shall be measured and paid under relevant of this item. |
| 9 | Supply and laying LT UG cable XLPE insulated armoured and PVC sheathed 1100 volts grade with aluminium conductor of 25 Sqmm 3.5 core with cable lugs including takeing down old unserviceble cables complete all as specified and directed. Note : Earth works excavation, returning filling, removal of surplus soil shall be measured and paid under relevant of this item. |
| 10 | Supply and laying LT UG cable XLPE insulated armoured and PVC sheathed 1100 volts grade with aluminium conductor of 35 Sqmm 3.5 core with cable lugs including takeing down old unserviceble cables complete all as specified and directed. Note : Earth works excavation, returning filling, removal of surplus soil shall be measured and paid under relevant of this item. |
| 11 | M&L for fixing straight through jointing kits heat shrinkable type LT UG XLPE cable heavy duty armoured sheathed and making the disturbed surface after relaying the cable and making joints suitalbe for aluminium conductor of 16 to 25 Sqmm 3.5 core complete all as specified and directed.Note : Taking up cable, excavation, returning filling and removal of surplus soil upto 1 Cum shall be included in the qouted rate. More than 1 cum shall be measured and paid separately under relevant items of this schedule. |
| 12 | Supply & laying DWC (Double Wall Corrugated) HDPE pipe ISI marked of outer dia of 50 mm and inner dia 38 mm polethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable complete all as secified and directed . |
| 13 | Material and labour for earthing complete with Glavnised iron plate 60x60 cm x 6 mm thick electrode buried directly in ground (earth pit no less than 2.25 Mtrs deep below ground level) with top edge of the plate not less than 1.5 Mtrs below normal ground level connected to glavnasied earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers all as shown in electrical plate no. 5 connected to earth test point and provn of GI pipe 20 mm dia medium grade for watering, GI pipe 40 mm dia light grade for earth strip protection all as specified and including excavation, earth work provn of earth pit, pit cover, CI funnel, wire mesh etc complete and testing on completion. |
| 14 | M&L for providing cement concrete Type D2 1:4:8 using 40mm graded stone aggregate in foundation filling and mass concrete for foundation for pole etc complete all as specified and directed. |
| 15 | M&L for providing cement concrete Type C1 1:3:6 using 20mm graded stone aggregate mass concrete for coping of pole etc complete all as specified and directed. |
| 16 | M&L for taking down unserviceable submain wiring of any type/size complete all as specified and directed |
| 17 | M&L for fixing submain wiring for two single core PVC insulated unsheathed , 1100 Volts grade, copper cable 1.5 Sqmm multistranded conductor and drawing through and including rigid PVC conduit of suitable size but not less than 20mm dia with conduit accessories etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 1.5 Sqmm copper conductor fixed to poles with saddles and screws complete all as specified and as directed Note :- One run of PVC conduit, two runs of cable1.5 Sqmm and one run of earth wire 1.5 Sqmm shall be measured and paid as one unit. |
| 18 | M&L for taking down transporting of unserviceable / damaged steel tubular pole / RCC pole for any type/size complete all as specified and directed. Note : Excavation/earth work etc shall be measured and paid for separately under relevant item of this Schedule . |
| 19 | Supply & Fixing HDGI Hexogonal/Octagonal pole 07 meter having top dia 70mm and bottom dia 135mm and thickness 3mm,including GI heavy duty light mounting bracket with nuts & bolts 4 Nos \\"J\\" type foundation bolts of dia 20mm and 600mm long with base plate of size 220mmx220mmx12mm Poles complete with 45 degree single curve type at the top for fixing of street light fitting complete all as specified and as directed by Engr-in-Charge. Note : Earth works excavation, returning filling, removal of surplus soil and PCC foundation shall be measured and paid under relevant of this items complete all as specified and as directed by Engr-in-Charge. |
| 20 | S&F of Street light fitting warm white LED type, warm white 90 Watts 240 Volts high luminous, energy efficiency not less than 100 lm/Watt, including SPD fitting before placing the street light and accessories complete connection complete all as specified and as directed by Engr-in-Charge. |
| 21 | M & L for painting RCC/steel tubular poles 9/11 Mtr long including cross arms etc. with one coat of white paint including preparation of surfaces and writing feeder name and pole number on the pole complete all as specified and directed by Engr-in-Charge |
| 22 | S & F of outdoor type water proof LED Tricolour (Orange+ White+Green) in single strip for decorative illumination 18 mtr long IP 65 , waterproof,dustproof, weather resistance (UV,water temprature) including power adopter ,drivers. The materials used for fixing on poles fastners, clips,clamp, Adhesive double sided tape etc all as specified and as directed by Engr in Charge. |
| 23 | Supply and Fixing automatic operation Astronomical street light timer panel,switch having lighting control (ON-OFF) through sun rise/sun set by setting date,time and degree of longitude and latitude without separate light sensors and pre-wired with suitable size copper conductor single core PVC sheathed cable cubical outdoor type enclosure (Box type) made out of CRCA sheet thick totally enclosed with front opening, and vermin proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, and the nuts/ bolts etc used are to be made of rust proof material with necessary arrangement fincluding under and over voltage protection relay, contractor MCB 65A TPN, 230 volts, complete all as specified and directed. |
| 24 | Supply and Fixing ACP (Aluminium composite panel) LED display board with Acrylic projected letters, thickness 2mm LED lights inside mounted on ACP box, Size 12.5 x 4.5 ft high quality weather protected transparent sheet. Fixing in wall/floor/gate with suitable tools and plants, painting complete, along with pipe bracket with accessories including light grade GI pipe duly grouted/frame work for main gate including PCC type B2 (1:2:4, using 40mm graded crushed stone aggregates) including all necessary fixing arrangement as per site, including taking down old unserviceable board complete. Note: details specifications for ACP boards is submit with computer design sample for approval by Engr in Charge. |
| 25 | S&F energy efficient post top light fitting warm white on wall/gate light with IP 65 protection high quality integrated LEDs assuring soothing warm white light 60 Watt cat no- LPTO-60-WW-M black case aluminuim, including all necessary wiring , clamps, nut and bolts mounting accessories etc all as specified and directed. Make - CG/Havells/ Philips |
| 26 | S&F of Flood light fitting LED type, warm white 200 Watts 240 Volts lumen efficiency not less than 100 lm/Watt , PDC housing with IP 65 flood light opties , efficient housing output LED sleek and robust design for better aesthetics , highly efficient reliable and sturdy, mounted on polel,connection complete all as specified and directed by Egineer-in-Charge |
| 27 | S&F Steel tubular swaged Poles complete with cast iron base plate, finial taper plug,bolts,nuts & screws as specified type 410 SP-55 (11.0 Mtrs long) with single curve at the top to make a iron angle frame sqare shape for fixing of street light fitting complete all as specified and directed by Egineer-in-Charge |
| 28 | Sup & Fix Junction box ISI marked, with suitable hosing for MCB SP 6A including nut bolts washer clamps etc complete to be fixed on the steel tubular all as specifed and as directed by Egineer-in-Charge. |
| 29 | S&F energy efficient warm white LED bollard outdoor garden light 10 watt height 800mm IP-65 rated inverted pyramid Tripod type fitting with soft 360 degree light distribution.All necessary wiring, clamps, nut and bolts mounting accessories etc all as specified and directed by Engineer-in-Charge.Make- Crompton/Philips/Luker or Equivalent. |
| 30 | Design, install, testing and commissioning sliding gate electric motor 230V, AC 50 Hz, suitable for sliding gate of capacity 2500 Kg including all connected accessories controller, safety sensor, push button, remote and GI rack complete all as directed by Engineer-in-Charge. |
| 31 | Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 50 Sqmm 3.5 core in duct / floor / wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engineer-in-Charge. |
| 32 | Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 10 Sqmm 3 core in duct / floor / wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engineer-in-Charg |
| 33 | Supply, laying of Telerx DWC (Double Wall Corrugated) HDPE pipe ISI marked of outer dia of 40mm polethylene including couplers, bends, cap etc., with smooth internal and pforiled external surface for non pressure under ground cable complete all as specified and directed. Make :- Gemini / Rex Polyextrusion Ltd or equivalent. |
| 34 | Supply, laying of Telerex DWC (Double Wall Corrugated) HDPE pipe ISI marked of outer dia of 63mm polethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable complete all as specified. Make :- Gemini / Rex Polyextrusion Ltd or equivalent. |
| 35 | Material and labour for earthing complete with galvanised iron plate 60xm x 60cm x 6mm thick electrode buried directly in ground (earth pit no less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead GI strip 32 x 6mm by means of bolts, nuts, check nuts and washers all as shown in electrical plate No 5 connected to earth test point and provn of GI pipe 20mm dia medium grade for watering, GI pipe 40mm dia light grade for earth strip protection all as specified and including excavation, earth work, provn of earth pit, pit cover, CI funnel, wire mesh etc complete and testing on compeltion all as directed at site by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender