Tender For Provn Of 04 No Bore Wells For Water Supply In Aor Of Ge Minniebay, Sri Vijayapuram (8855/E8)
Tender Value
43.50 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
20 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 04 No Bore Wells For Water Supply In Aor Of Ge Minniebay, Sri Vijayapuram (8855/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Drilling trial bore with percussion/rotary/mechanical ring bore hole at the site from ground level to the depth 80 mt appro, suitable size 180 mm bore casing PVC pipes upto 20mtr appro complete all as specified and directed by Engr-in-Charge. Note:- PVC Casing 180mm shall be measured under relevant items of sch \\"A\\". Quantity catered below is meant for 4 in Nos bore wells. |
| 2 | Drilling bore hole vertically down suitable for lowering casing/ slotted pipe of size 180 mm bore initially up to a depth of 20 M approx. there after reduced to 140 mm bore up to a total depth of 100 M including necessary annular space for gravel packing using rigs and other machinery for rottery or DTH process or combination of both in/ through any strata such as loams and, red clay, moorum, weathered rocks, rock, hard rock, lightly fractured rock, top soil, sandy clay, debulled soil, loamy soil or any other geological formation and construction of pcc platform. Note :- Casing / slotted pipes and pee gravel will be measured and paid sperately. Quantity catered below is meant for 4 in Nos bore wells. |
| 3 | Supplying, lowering and fixing into bore hole PVC housing pipes jointed duly with socket and spigot of each casing pipe of size 180 mm nominal bore, of pressure rating 6 Kg/Sq cm complete all as specified and directed. Note : Depth of bore and depth of pipe can vary as per rqmt and availabilityof water |
| 4 | Supplying, lowering and fixing into bore hole PVC pipes perforated 140 mm nominal bore,of pressure rating 6kg/sqmm including making slot of suitable size throughout pipe complete all as specified and directed. |
| 5 | Developing the tube well by means of air compressor unit of adequate capacity not less than 250 PSI and over pumping with the help of suitable size of pump untill sand free water is obtained and accessories and sand by DG set in order to ensure continuous pumping for 02 hrs & yield test by 'V' notch method. Note :- Rate quoted will include provision of all T&P required for this test to be provided by the contractor for duration. |
| 6 | M&L for carrying chemical / bacteriological analysis and portability test of water obtained from bore well from Andaman state board/ MCD/ approved Micro Engineering and testing lab and submitting the report in duplicate to Engr-in-charge, complete all as specified and directed. |
| 7 | Supply & fixing HDPE heavy duty column pipe internal dia 50mm PN 16kq/Sqmm including necessary all fixings complete all as specified and directed. |
| 8 | Supplying, installation, commissioning and testing 3 phase submersible pump 5 HP 415 Volts AC 50 Hz 400 LPM, 100 mtr head and discharge suitable for 50 mm dia column pipe of bore well complete all as specified and directed. Make :- Kirloskar/ KSB/Crompton Greaves. Note:- Depth of lowering of pump shall be as recommended after yield test for safe yield. |
| 9 | Supplying, installation, commissioning and testing 3 phase submersible pump 3 HP 415 Volts AC 50 Hz 300 LPM, 100 mtr head and discharge suitable for 50 mm dia column pipe of bore well complete all as specified and directed. Make :- Kirloskar/ KSB/Crompton Greaves. Note:- Depth of lowering of pump shall be as recommended after yield test for safe yield. |
| 10 | Supply and fixing submersible cable 3 core flat of size 4 sqmm with multi stranded copper conductor cable complete all as specified and directed. |
| 11 | S&F MS well cap suitable for 140 mm dia casing pipe with 4 Nos 16 mm dia nuts , bolts and washers MS clamp fabricated from flat iron 50 x 6 mm thick duly drilled holes of suitable size including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 12 | Supply and fix 50mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed. |
| 13 | Supply and fixing of DI D/F Sluice valve of 80mm dia (Soft Sealed) Resilient Seated Soft Sealing gate valves( Sluice valves NON RAISING TYPE ) with body bonnet of ductile cast iron of grade GGG-40/SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per IS 3896 - Part 2- 1985 and subsequent revisions, Wedge fully rubber lined with EPDM Food grade quality and Seals of NBR and the valve should be vacuum tight and 100 % leak proof with face to face dimension as per BS 5163-89/IS 14846-2000/DIN 3202 F 4. and Valves should be electrostatic powder coating both inside and outside pocket less body passage class PN 1.6 including all jointing materials viz., Gasket, Nut bolts etc., connecting and testing complete all as specified and as directed by Engr-In-Charge. |
| 14 | S&F gun metal non return valve 50mm dia, complete all as specified and directed. |
| 15 | Supply and fixing Non Return valve of size 80 mm dia, connecting & testing both ends flanged and drilled cast iron body class PN-1.6 confirming to IS- 14846/2000 complete with gun metal spindle including necessary nut bolt etc., complete all as specified and directed. Make: Kartar/Kalpana/Kirloskar |
| 16 | Supply and fixing Non Return valve of size 100 mm dia, connecting & testing both ends flanged and drilled cast iron body class PN-1.6 confirming to IS- 14846/2000 complete with gun metal spindle including necessary nut bolt etc etc., complete all as specified and directed. Make: Kartar/Kalpana/Kirloskar |
| 17 | Supplying & fixing DI fittings for spigot & socketed pipes such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc),tee pieces, single branch, 'Y' junction, double branch, cross collar, caps and plugs etc. suitable for spigot and socketed pipes upto 150 mm bore, complete, all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
| 18 | Supplying & fixing DI fittings for spigot & socketed pipes such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc),tee pieces, single branch, 'Y' junction, double branch, cross collar, caps and plugs etc. suitable for spigot and socketed pipes upto 150 mm bore, complete, all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender