Tender For Maintenance Of Imc Hatchery At Avanga Fsc Along With Construction Of Wash Room At Avanga Fsc Under S.F. Kamalpur, Dhalai Tripura District
Tender Value
5.71 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
3 days left
EMD
11432
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhalai → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Imc Hatchery At Avanga Fsc Along With Construction Of Wash Room At Avanga Fsc Under S.F. Kamalpur, Dhalai Tripura District
BOQ
| Sl. No. | Item Description |
| 1 | Item Description |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.-All kinds of soil . |
| 3 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level:1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level:1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) . |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply. |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 11 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 12 | 15mmcementplasterontheroughsideofsingleorhalf brick wall of mix: Cement mortar 1:3 (1 cement: 3 fine sand) |
| 13 | Finishing walls with water proofing cement paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer : New work ( two or more coats applied @ 3.84 kg/10 sqm) |
| 14 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 15 | Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requiredOne urinal basin with 5 litre white P.V.C. automatic flushing cistern. |
| 16 | Providing and Fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever requiredSingle half stall urinal with 5 litre P.V.C. automatic flushing cistern. |
| 17 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 18 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings i/c fixing the pipe withclamps at 1.00 m spacing. This includes jointing ofpipes & fittings with one step CPVC solvent cementand the cost of cutting chases and making goodthe same including testing of joints complete as perdirection of Engineer in Charge.Concealed work including cutting chases and makinggood the walls etc.15 mm nominal outer dia .Pipes. |
| 19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings including fixing the pipe withclamps at 1.00 m spacing. This includes jointing ofpipes & fittings with one step CPVC solvent cementand testing of joints complete as per direction ofEngineer in Charge.Internal work - Exposed on wall50 mm nominal outer dia .Pipes. |
| 20 | Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end):80 mm nominal bore. |
| 21 | First class brick work in foundation and plinthIncluding cost of all materials as required complete: -In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 22 | Half brick masonry work with first class bricks infoundation and plinth including cost of all materials asrequired complete:- In cement mortar 1:3 ( 1 cement : 3 fine sand ). |
| 23 | Half brick masonry work with first class bricks insuperstructure upto floor five level including cost ofall materials as required completeIn cement mortar 1:3 ( 1 cement : 3 fine sand ). |
| 24 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position : Local Teak Wood . |
| 25 | Providing and fixing factory made UPVC door framemade of UPVC extruded, section having an overalldimension, as below (tolerance +/- 1mm) with wallthickness 2.0mm+/- 02mm. corners of the door frameto be jointed with galvanized brackets and stainlessscrews, joint mitred and plastic wilded. The hinge sidevertical of the frames reinforced by galvanized MStube of size 19 × 19 mm and 1 mm +/- 0.1 mm wallthickness and 3 nos stainless steel hinges fixed to theframe complete as per manufacturers specificationand direction of Engineer-in-Charge.Extruded section Profile size 48x40 mm |
| 26 | 24 mm thick factory made PVC door shutters made ofstyles and rails of a UPVC hollow section of size 59x24mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred andjoined at the corners by means of M.S. galvanised/plastic brackets of size 75×220 mm having wallthickness 1.0 mm and stainless steel screws. The stylesof the shutter reinforced by inserying galvanised MStube of size 20×20 mm and 1 mm ± 0.1 mm wallthickness. The lock rail made up of \\"H\\" Section, a UPVChollow section of size 100×24 mm and 2 mm ± 0.2 mmwall thickness fixed to the shutter styles by means ofplastic /galvanised MS \\"U\\" cleats. The shutter framefilled with a UPVC multi-chambered single panel of sizenot less than 620 mm, having overall thickness of 20mm and 1 mm ± 0.1 mm wall thickness. The panelsfilled vertically and tie bar at two places by insertinghorizontaly 6 mm galvanised MS rod and fastened withnuts and washers, complete as per manufacturer'sspecification and direction of Engineer-In-Charge. (forW.C. and Bathroom door shutter). |
| 27 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 markedwith cover and suitable locking arrangement andmaking necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for Tank. |
| 28 | Providing structural steel work riveted, bolted or weldedin built up sections, trusses and framed work, includingcutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender