Heavy Industries and Public Enterprises Government Departments Closing in 1 days TDR #57698817

Tender For Annual Maintenance Works Of Different Kinds At I.A. Dibyapur,Distt-Auraiya.

Issued by Government Departments · Auraiya, Uttar Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Oct 2026
1 days left
EMD
1.92 Lakhs
Bank guarantee accepted
Document Fee
3497
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Auraiya → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Annual Maintenance Works Of Different Kinds At I.A. Dibyapur,Distt-Auraiya.

BOQ

Name of Work:- Annual Maintenance works of different kinds at I.A. Dibiyapur,Distt.-Auraiya
Sl. No. Item Description
1Cleaning Jungle including uprouting of trunk vegetation grass, bush, wood, tries & saplings of girth upto 30 cm. measured at a height of 1 meters above grund level & removal of rubbish upto a distance of 50 meters out side the periphery of area cleared.
2Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
3Desilting of Drains in or under foul condition , loame , clay or sand including lift upto 1.5M & lead 30M including disposal of surplus earth as directed by the engineer in charge upto a distance of 30M. and inciuding all labours T&Ps etc. :-
4Cartege of Ballast, Kankar,coal,grit or sand earth etc.including loading and unloading but excluding stacking on pucca road(3Km).SOR (231(a), ch 3)
5Road marking with hot applied thermoplastic compound with reflectrorising glass beads on bituminous surface - paroviding and laying of hot applied thermoplastic compound 2.5mm thick including reflectrorising glass beads 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level uniform and free from streaks and holes.
6Class-150 brick work in 1:6 cement and coarse sand of 1.25 fineness modulous motar in fondation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work
712 mm thick Plaster with cement motar in proportion of 1:2 cement and coarse sand.
8First class brick work in 1:6 cement and fine sand of 1.25 F.M. mortar in the super-structure including necessary cutting and moulding of bricks as required and also including honey comb brick, but for wall of one brick thick including supply of all materials, labour and T&P etc required for proper completion of the work.
9Providing and laying cement concrete 1:4:8 (1 cement, 4 coarse sand, 8 graded stone ballast 40 mm nominal size) including supply of all materials labour and T&P etc. required for proper completion of the work and curing complete, also including cost of form work in foundation and floors.
10R.C.C. work with cement approved coarse sand and 2 cm. (3/4\\") gauge approved stone ballast in the proportion of 1:1-1/2;3, for the R.C.C T-beam and slab roofs & R.C.C. columns excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T&P etc. required for proper completion of the work binding wire cost being included in the item.
11Providing and laying cement concrete 1:2:4 (1Cement.2 coarse sand, 4graded stone ballast 20mm. Nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete also including cost of from work in foundation & floors.
12Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates) brought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & over lapping & hooks.
13Painting or varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of work. Paint to be used should confirm to the ISI No. 103. 1950
14Finishing wall with Acrylic smooth exterior paint with silicone additives of required shade New work(Two or more coats applied @1.43ltr/10sqm over and including priming coat of exterior appllied @2.20kg/10sqm) (apex ultima, weather coat All quard) Asian , berger.
15Providing wheeled excavator cum loder including POL and Driver (JCB)
16Supply of Tractor & trrolly include driver & POL
17Supply of Beldar (unskilled) Granolethic cutter / collie / mazdor
18Supply of mate
19Providing Sweeper for sweeping Roads including Miscellaneus charges ( uniform ,Jackets,shoes ,gloves,mask,caps etc
20Construction of Granular sub base by providing Coarse gradede material spreading in uniform layers with layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting Vibratory roller to achieved the desired density complete as per clause 401 .
21Provinding and applying tack coat with bitumen (VG-10) using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminos / granular surface cleaned with mechanical broom.
22Providing and laying 40 MM thick Bituminous Concrete with 100-120 P TPH batch type HMP prouding an average output of 75 tonnes per hour using crushed aggregate of specified grading, premixed with Bituminous binder @ 5.4 percent of mix and filler, tronsporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem roller, to achieve required compaction as per MORTH Specificatio Clause no -509, including tack coat complete in all respect, including supply of all material, labour, T&P etc. as required for proper completion of the work.
23Providing and laying rubber moulded reptective Zig-Zag 80 mm thick interlocking tiles of precast compressed cement concrete of 30 mpa (M-30) compressive strength ISI Marked made by table vibratory method, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with ganga sand and cutting of paver blocks as per required size and pattern,finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer’s specifications & direction of Engineerin-Charge including supply of all material, labour, T&P etc. as required for proper completion of the work.
24Lettering with black Japan paint of approved brand and manufacture.
25Tractor with water tanker with including Driver and POL.
26Dewatering works (1 pump) Hire charges of pump set for 4000 Lt/Hr. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57698817
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 15-10-2026
Authority
Authority Name Uttar Pradesh State Industrial Development Corporation Limited
Work Description Tender For Annual Maintenance Works Of Different Kinds At I.A. Dibyapur,Distt-Auraiya.
Basic Detail
Tender No cd_tgc_228_dt_14092026
Bidding Type Tender
Location
City Auraiya
State Uttar Pradesh
Key Dates
Publish Date 24 Sep 2026
Submission Date 15 Oct 2026
Open Date 16 Oct 2026
Finance
Tender Value Ref. Documents
Tender Fee 3497
EMD 1.92 Lakhs
Exemption Not Available
Document List
5f60f8b3-678b-43b7-a07d-65916e888d23.html
BOQ_2241275.xls
etenderdocument.pdf
feeformatn.xls
Tendernotice_1 (76).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 24, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 15, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Oct 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
html

5f60f8b3-678b-43b7-a07d-65916e888d23.html

xls

BOQ_2241275.xls

pdf

etenderdocument.pdf

xls

feeformatn.xls

pdf

Tendernotice_1 (76).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender