Tender For Special Repairs To Kallanai Anicut In North Devathanam Village Of Rajapalayam Taluk In Virudhunagar District.
Tender Value
4.49 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
10 days left
EMD
4620
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Virudhunagar → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Kallanai Anicut In North Devathanam Village Of Rajapalayam Taluk In Virudhunagar District.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size of boulders hard gravelly soil inclusive of shoring to full depth strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated soil other than sand in layers of not more than 15 cm thick, well rammed, consolidated and depositing the surplus earth in places as shown by the departmental officers with an initial lead of 10 metres and initial lift of 2 metres and clearing, levelling the site etc., complete complying with standard specification and as directed by the departmental officers. |
| 2 | Providing Steel centring for RCC Slabs, beams or plain surfaces including strutting upto 3.29 m high using MS sheets, 10 guage thick of size 90cm x 60cm, Stiffened with Ms angles of size 25mm x 25mm x 3mm laid over silver oak joists of size 10 cm x 6.5 cm spaced at 90 cm c/c and supported by casurina props of 10 cm to 13cm dia spaced at 75 cm c/c and removing the centring and shuttering after specified period without damaging the concrete laid, etc., complete complying with standard specification and as directed by the Departmental Officers. (For Retaining walls and Sluices) With strutting |
| 3 | Below Ground Level without strutting |
| 4 | Above Ground Level with strutting |
| 5 | Supplying, fabricating and placing in position of HSD (high Yield Strength) bars for all reinforced cement concrete works including cost of binding wire, steel rods, conveyance charges and labour charges etc., complete complying with standard specification and as directed by the Departmental Officers. cutting, bending and tying the grills complete complying with standard specification. Steel and binding wire will be at the contractor's own cost. |
| 6 | Providing and laying in position,standardised concrete mix M20 grade in accordance with IS 456-2000,using 20 mm and down graded hard broken granite stone jelly for all RCC items of work with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55,including admixture (plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability with about (5 cum) 7730 kg of 20 mm machine crushed stone jelly and with about (3.3 cum ) 5156 kg of 10-12 mm machine crushed stone jelly and with about (4.79 cu.m)7670 kg of CS sand but excluding cost of reinforcement grill and fabricating charges,centering and shuttering and also including laying,vibrating with machanical vibrators,finishing,curing,etc. complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS standards (No separate payment will be made by the department for the excess usage of materials) |
| 7 | Drilling holes 50mm dia in existing body wall for placing anchor rods etc. complete etc., complying with standard specification and as directed by the departmental officers |
| 8 | Grouting the holes of 50mm dia with C.M 1:2 w/c ratio of 0.33 in the existing anicut body wall provided at a spacing of 70 cm c/c in a staggered manner in the vertical surface for fixing anchor rod of 16 mm dia RTS rod of 1m length in a such position that 60 cm length embeded into the masonry wall at a downward inclinations of 5 degree to horizontal and 40 cm length projected and bend out side the wall including cleaning the drilled hole fixing the rod and other incidential charges etc. complying with standard specification and as directed by the departmental officers. |
| 9 | Plastering with Cement Mortar 1:4 (One cement and Four sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 10 | Pointing with CM 1:3 over the old revetment and retaining wall portion including curing and removing weeds in the old revetment and retaining wall portion and clean removal plaster from wall and revetment in hanging condition etc., complete complying with standard specification and as directed by the engineer in charge of work. |
| 11 | Earth work deploying earth moving machinery for desilting channel and forming bund on either side and depositing the earth on banks including sectioning and jungle clearance etc complete complying with standard specification and as directed by the departmental officers. Width more than 10 m |
| 12 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender