Tender For Sfc (Dpt) 2026-27 Dindigul Block Tn-05-03 Of 1 Works - Dindigul District - Repairs To Anganwadi Centre Building @ Bharathipuram Head Of A.Vellodu
Tender Value
3 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
9 days left
EMD
3000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dindigul → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Sfc (Dpt) 2026-27 Dindigul Block Tn-05-03 Of 1 Works - Dindigul District - Repairs To Anganwadi Centre Building @ Bharathipuram Head Of A.Vellodu
BOQ
| Sl. No. | Item Description |
| 1 | Part 1 : Repairs to Anganwadi Centre Building @ Bharathipuram H/o AdiyanuthuEstimate Amount Rs.3.00 lakhs |
| 2 | Dismantling the existing damaged one course of pressed tile roof finish in cement mortar including all labour charges etc., complete and carefully stacking the usefull tiles for re-use., as per standard specification |
| 3 | Dismantling completely demaged cement concrete flooring including cost and conveyance of all material to site and all labour charges etc,completed |
| 4 | Clean and Removal of Cement Plaster Wall surface including all labour charges |
| 5 | Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete |
| 6 | Towards supply and delivery of Cutstone Pillar size of 0.15 x 0.15 x 2.10 including cost and conveyance etc.,complete as per std. Specification |
| 7 | Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification |
| 8 | Brick work using country bricks of size 83/4\\"x41/4\\"x23/4\\" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction. |
| 9 | Finishing the top of roof with one course of machine pressed tiles of size 20cmx20cmx20mm of approved quality laid in cement mortar 1:3 mix to 12mm thick mixed with water proofing compound confirming to ISS by 2% weightof cement used and the joint pointed |
| 10 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 11 | Plastering with cement mortar 1:5 mix to 12mm thick including curing, cost and conveyance of all materials & all labour charges etc., complete. |
| 12 | Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) |
| 13 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 14 | Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 15 | Distembering two coats with best quality of distember and the colour approved by the departmental officers including cost & conveyance of all materials to site and all labour charges etc., complete. |
| 16 | Painting two coats with ready mixed Plastic emulsion of first class quality paint and of approved colour over a priming coat including through scrapping clean removal of dirt etc. complete and including necessary plaster of paris, putty wherever required. |
| 17 | Painting two coats with quality synthetic enamel paint over the existing priming coat including cost & conveyance of all materials to site and all labour charges etc., complete. |
| 18 | Painting two coats with approved Black Oxide for Old Black board |
| 19 | Supply and Fixing of Chain Link - 2\\" x 2\\" using 10 gauge Galvanised Iron Wire (of all sizes) including all materials etc., complete. |
| 20 | Supply and Fixing of Barbed Wire - 20 gauge - Two Ply and Four Pronged (Galvanised) (1kg = 6m) Galvanised Iron Wire (of all sizes) including all materials etc., complete. |
| 21 | Supply and Fixing of New Steel Window Size of 1.50 x 1.20 m including cost and all labour charges |
| 22 | Supply and Fixing of New Steel Window Size of 0.90 x 1.20 m including cost and all labour charges |
| 23 | Supply and Fixing of Cadhappa slab size of 0.90 x0.45 including cost and all labour charges |
| 24 | Wiring with 2 x 1.5 sq.m (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light point/fan point(for electronic regulator) - S.D.No: 17 |
| 25 | Wiring with 2 x 1.5 sq.m (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150 x 100 x 113 TW switch box for 5A 3pin non inter locking CS plug with painting of suitable colour with continuos earth wire connection of 14 SWG TC wire for open PVC plug - S.D.No: 36 |
| 26 | Supply and fixing of 11 w CFL Light Fitting Arrangement |
| 27 | Supply and fixing of single box type 4'40 W LED fitting complete TW round blocks on wall or ceiling with LED with PVC unsheathed copper leads from terminals to the fitting - S.D.No: 88 |
| 28 | Supply and fixing of 1200mm (48\\") AC ceiling fan with stepped electronic 300 W regulator with 1 meter down rod on the existing clamp. - S.D.no: 106 |
| 29 | Supply and fixing of PVP pipes and specials |
| 30 | 500 lit HDPE Tank |
| 31 | 32mm dia PVC pipe |
| 32 | 32mm dia PVC Bend |
| 33 | 32mm dia PVC Tee |
| 34 | 32mm PVC Gatevalve |
| 35 | 63 x 23 PVC Saddle Piece |
| 36 | 15mm PVC Tap |
| 37 | Supply and Fixing of 110mm PVC Rain water Pipe Arrangement |
| 38 | Repairs to Existing Demaged Door and Toilet Door |
| 39 | Name Board Painting and lettering the scheme details with approved colour and quality of paint on the exterior surface etc. complete and as directed by the departmental Officers. |
| 40 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender