Tender For Certain Repairs To Joinery, Flooring, Roof, Wall Seepage And Connected Civil Works In Certain Buildings Of At Dlrl, Ngram Area & Dsc Complex Under Age B/R-I , Hyderabad.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
15 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs To Joinery, Flooring, Roof, Wall Seepage And Connected Civil Works In Certain Buildings Of At Dlrl, Ngram Area & Dsc Complex Under Age B/R-I , Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs etc and holding if required reconnection and refixing in position, capacity of tank exc 250 & n.exc 500 Ltrs capacity complete all as specified. |
| 2 | All as item No.01 above but for capacity of tank exc 500 & n.exc 1000 Ltrs capacity complete all as specified. |
| 3 | Cutting /removing of plants and grass growth on bldg's roofs, chajjas and edges on bldgs,work shop, hangers (at any floor and any height) including spreding chemicals at plant roots area and finished the damaged area with PCC 1:2:4/ Cement plaster in CM 1:4 as required and remove the waste to distance n exc 50m, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Demolition of cement concrete in any position incl removal of any type of old treatment, tarfelt & debries etc complete all as specified & directed by Engr-in-Charge. |
| 5 | M&L for roof padding concrete in B0 (1:2:4) using 12.5mm aggregate for levelling complete all as specified. |
| 6 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3complete all as specified. |
| 7 | M&L for rendering 10mm thick in CM 1:3 over concrete surfaces on RCC roof slab and parapets mixed with WPC @3% by weight of cement shall be carried out complete all as specifed and directed by Engr-in-Charge. Note : WPC will be measured under separate item of this schedule. |
| 8 | Supply only intergal water proofing compound complete all as specified. |
| 9 | M&L for brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified. |
| 10 | M&L water proofing treatment with polymeric standard membrane of weight not less than 3.50 kg per sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150gms/sqm) laid over primed surface by forced application complete. Shall be fused uniformly by LPG torch flame on horizontal/vertical/slope surface on roof complete all as specified and directed by Engr-in-Charge.Course roof treatment consist of as under :-(i) Applying one coat of bituminous primer conforming to IS-3384 @ 0.3 Ltr per sqm(ii) Laying of APP based membrane as specified thickness and weight(iii) Applying one coat bitumen grade 85/25 @ 1.2 Kg/Sqm(iv) Applying two coat of aluminium paint @ 100 ml/sqm. Complete all as specified. |
| 11 | (a) M&L for mechanical cleaning of surface to make it free from any bituminous residue/dirt, oil and grease etc all as directed by the GE/Engr-in-charge.(b) M&L for cracks treatment by cutting open cracks and cleaning it from dirt, loose materials etc and filling with polyurethane based sealant with and including application of PU based primer all as directed by GE/Engr-in-charge.(c) M&L for applying water based polyurethane modified dispersion (single component cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of primer of same material after dilution of water at 50% or specific primer matching same material as per manufacturer specification and as directed by GE/ Engr-in-charge.(d) Apply the 1st coat using a brush or roller while the primer is still tacky, lay down a 45 GSM non-woven geo-textile or fiber glass tissue with 50 mm overlaps in both directions.Allow the first coat to dry completely for 10 to 12 hours and then Apply the 2nd coat to achieve a total Dry Film Thickness (DFT) of 1000 microns (1 mm) across two coats.Allow a final curing period of 36 hours before allowing any foot traffic or subsequent work. |
| 12 | Properties of poly urethane based chemical shall confirm to following Technical Parameters:(i) Highly elastic.(ii) UV resistance.iii) Adhesion to concrete > 1N/Sqmm.(iv) Tensile strength not less than 2.0N/Sqmm for free film.(v) Elongation – not less than 300%(vi) Solid content by weight – not less that 60%.(vii) Air/water permeability BSEN 12390 at 5 bar-72 hours should be NIL and minimum dry film thickness of water proofing membrane must be 1.0mm.(viii) Accelerated weathering (ASTM 453): Pass 1000 hours.(ix) Reaction to fire – non inflammable.Make: Bostik, Berger, Fosroc, Sika, Asian or any other make approved by E-in-C’s Branch for PU based water proofing treatment. |
| 13 | Dismantling of existing AC (corrugated, semi corrugated etc) roof covering sheet complete all as specified and directed. |
| 14 | M&L Pre-painted galvalume aluminium zinc coating GI based corrugated /trepezoidal steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 15 | M&L Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in ridges fixed with self tapping screws complete all as directed. |
| 16 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid on and including 15mm thick screed bed in cement mortar 1:6 including taking down existing stone slab/ tile complete all as directed. |
| 17 | M&L for 75mm thick plain cement concrete1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection including providing 10mm thick joints filled with bituminous & sand mixture (1:7) at not exc 3.00 mt intervals & at corners and finished even and smooth without using extra cement including demolition of existing concrete complete all as directed. |
| 18 | M & L for plain cement concrete(1:3:6) type C-2 (using 40 mm graded stone aggregate) of 100 mm thick as in Path / PCC floor, finished even and fair including demolition of existing concrete complete all as directed. |
| 19 | M&L for coloured chequered cement concrete tiles 25mm thick,of any shape and size not less than 0.09 sqm in each tiles, set and jointed, pointed in neat cement slurry in floors with grey cement and pigment over 15mm thick screed in cement mortar (1:6) including dismantiling of existing tiles complete all as directed. |
| 20 | Taking down cement plaster including raking out joints,hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 21 | Material and labour 10mm thick rendering on other than faces of brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cement complete all as specified and directed. |
| 22 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces and finished even and smooth without using extra cement complete all as directed. |
| 23 | M&L for preparation of new plastered surfaces of wall applying two coats of oil bound distemper over primer and 3mm wall care putty complete all as directed. |
| 24 | M&L for Preparation of new plastered surfaces and applying two coats of weather proof antifungal Acrylic Exterior emulsion paint of Apex Ultima and shade over a coat of approved primer as recommended by the manufacturer over a coat of putty to make surfaces smooth all as required and as directed. |
| 25 | S & F 10 mm thick Aluminium grill of make \\"Deco grill\\" ,DG - 104 model or any other equivalent approved make fitted in to suitable Aluminium channel , 'F' section and fixed to windows/ ventilators complete all as approved and directed. |
| 26 | S&F aluminium anodised snap grid frame work for false ceiling grid size 605x605 mm with runners aluminium anodised main Tee of section 35x35x1.5 mm thick, cross Tee of section 25x25x1.5 mm thick and aluminium anodised angle of size 25 mm x 1.5 mm thick section fixed along side of wall including hanging from ceiling with 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete incl dismantling old false ceiling all as specified |
| 27 | M&L for providing 12mm thick Gypsum board as in ceiling fixed with screw as per manufacturers instructions and finished with two coats of plastic emulsion paint over a coat of primer on exposed surfaces complete all as specified. |
| 28 | M&L for providing 10 mm thick PVC insulation false ceiling tiles with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling grid made suitable to fix tiles as per manufacturer's instructions, fixed at any height complete all as directed. Please Enable Macros to View BoQ information |
| 29 | M&L for providing 10 mm thick PVC insulation false ceiling tiles with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling grid made suitable to fix tiles as per manufacturer's instructions, fixed at any height complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender