Tender For Construction Of Sluice Gate On Pokoria R/B Embankment From Teteliguri To Patekibori.
Tender Value
6.74 Crore
Estimated cost
Bid Submission
14 Oct 2026
17 days left
EMD
13.49 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Marigaon → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Sluice Gate On Pokoria R/B Embankment From Teteliguri To Patekibori.
BOQ
| Sl. No. | Item Description |
| 1 | Plain/reinforced cement concrete in substructure complete as perdrawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204A) With Crushed StoneII) P.C.C. grade M 20(i) Nominal mix (1:2:4) |
| 2 | Plain/Reinforced cement concrete, in sub structure complete as per drawing and technical specification and steel shuttering formworkP) With plasticiser (Masterplast PL-1/SPL-2 or equivalent), air entraining and water reducing plasticiser (Masterplast PAE or equivalent) and accelerating plasticiser (Masterplast ACPL or equivalent) conforming to IS-9103-1999(F) RCC Grade M 25(a) for height upto 5m. Case I: Using Concrete Mixer |
| 3 | Supplying, fitting and placing TMT (Fe-500 D) reinforcement bar (From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 |
| 4 | Providing and laying flooring laid over cement concrete bedding complete as per drawing and technical specification Clause 1303III) Brick on edge laid in cement mortar (1:3) |
| 5 | Excavation for StructuresEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.V) Marshy soil |
| 6 | Supplying and Driving of NSZ801 Type Vertical Steel Piles (t=8mm, s=8mm, w=690mm) complete as per Drawing and & Technical Specification. |
| 7 | Bored cast-in-situ M35 grade R.C.C. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m including providing plasticiser (Masterplast PL-1/SPL-2 or equivalent), air entraining and water reducing plasticiser ( asterplast PAE or equivalent) and accelerating plasticiser (Masterplast ACPL or equivalent) conforming to IS-9103-1999 (Pile diameter-750 mm) |
| 8 | Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification. Sandy Material |
| 9 | Dewatering by 5 H.P. water pump including supply of necessary fuel, engine oil and pump operator etc. complete as directed. |
| 10 | Construction of Apron with boulder |
| 11 | Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications Clause 1301 |
| 12 | Fabrication of shutter's, Platform and Ladder |
| 13 | M.S. Plate 6mm thickness for skin plate, platform floor etc. |
| 14 | M.S.Channel 175 x 90mm for shutter vertical & horizontal stiffeners, frame etc. |
| 15 | M.S.Flat 50 X 6 mm for rubber seal fitting. |
| 16 | \\"J\\" type rubber seal 125mm. |
| 17 | M.S. Joist 125 x 70 mm for cross-members of platform etc. |
| 18 | M.S. Angle 75x75x6 mm for platform floor frames, post and ladder etc. |
| 19 | M.S. Angle 50x50x6mm for platform railings |
| 20 | M.S.Electrode 8 swg. |
| 21 | M.S.electrode 10 swg. |
| 22 | Antisol red oxide paint |
| 23 | Red oxide primer. |
| 24 | Turpentine oil. |
| 25 | Painting brush 3\\"11 |
| 26 | Steel wire Brush. |
| 27 | Filled Oxygen Gas |
| 28 | Filled D.A. Gas |
| 29 | Waste cotton |
| 30 | Fabrication & Installation of operating and lifting system |
| 31 | M.S. Shaft(best quality)of 63mm dia |
| 32 | Thread cutting (Square) 1 TPI/2TPI including fine finishing and making hole in one end as per direction for size of 63mm |
| 33 | C.I. Boss with internal thread cutting 1 TPI/2 TPI, making groove for bearing slot for lock plate and 1.5\\" drill for providing handle as per direction for the following sizes: (dia. × height)of size 125 mm × 175 mm |
| 34 | H.D.Thrust ball bearing(best quality) ISI specified a)65mm. |
| 35 | M.S. base plate 300 mm × 300 mm as per direction including supply of materials. (Machine finished)of size 12 mm thickness |
| 36 | M.S. lock plate 300 mm × 300 mm as per direction including supply of materials. (Machine finished)of size 10 mm thickness |
| 37 | Clamp for lock plate. |
| 38 | M.S.Electrode 8 swg. |
| 39 | M.S.electrode 10 swg. |
| 40 | Shaft pin with length up to 150 mm for the following diameters b) 16 mm |
| 41 | Distant tube with pin of size a) 75 X 12mm |
| 42 | G.I. pipe a)25 mm dia |
| 43 | C.C. counter weight circular type 400 mm dia around 100 mm thick with 25 mm dia. hole at centre & two handles for carrying weight of 30 Kg each as per direction (Machine finished) |
| 44 | Counter weight holder |
| 45 | Pulley stand made of 100x50 mm channel for a) 125mm |
| 46 | Pulley stand made of 100x50 mm channel for a) 150mm |
| 47 | Pulley pin 16 mm dia |
| 48 | C.I. Pulley 16mm to 25mm dia with centre hole as per direction (machine finished) a) 125 mm |
| 49 | C.I. Pulley 16mm to 25mm dia with centre hole as per direction (machine finished) a) 150 mm |
| 50 | Steel wire rope 16 mm |
| 51 | Making & supply of C.I. roller with suitable collar 10 - 12 mm & centre hole 10 - 20 mm as per direction (Machine finished), size (dia. × height) a) 100 mm × 150 mm |
| 52 | C.I. roller pin of length 150 mm to 250 mm dia. (Machine finished) of 16 mm |
| 53 | F' shaped roller bracket made of 10 mm thick plate of size 75 × 200 mm with hole as per direction to accommodate with the roller size: (Machine finished)a) 100 mm × 150 mm |
| 54 | Fabrication and installation of Guide channel, Top and Bottom channel of the sluice |
| 55 | M.S. Channel 175 X 75 mm for installation of guide pairs for two openings. |
| 56 | M.S Channel 175 X 75 mm for top and bottom channel. |
| 57 | M.S. plate 10 mm for Guide channel, Tool Post bottom support. |
| 58 | M.S. Plate 6 mm for Platform top covering of sluice |
| 59 | M.S.Angle 75 X 75 X 8 mm for Tool post,anchoring. |
| 60 | Filled Oxygen Gas |
| 61 | Filled D.A. Gas |
| 62 | MS Rod |
| 63 | Seperator stud with nut on both end with tube of lenghth 250 mm to 460mm |
| 64 | M.S.Electrode 8 swg. |
| 65 | M.S.Electrode 10swg. |
| 66 | Fabrication charges & Commissioning items for the work |
| 67 | Skilled labours to be engaged for fabricarion , Arc welding works & Gas cutting, Measuring & fine finishing during fabrication & installation of the mechanical part of sluice gate |
| 68 | Ordinary labour to be engaged for carrying & handling of sluice gate materials, various assisting works during fabrication & installation etc. |
| 69 | Arc welding holder 600 Amp. |
| 70 | Arc welding mask. |
| 71 | Arc welding dark glass. |
| 72 | Arc welding cable 600 Amp. |
| 73 | Lubricating oil |
| 74 | Gas cutting hose, 12 mm dia.(Black & Red). |
| 75 | W.B. Grease |
| 76 | Nuts and Bolts (3/8\\", 5/8\\",7/8\\"). |
| 77 | M.S.Washer. |
| 78 | Leather hand gloves |
| 79 | Nylon rope 16mm to 20mm. |
| 80 | Matured full length bamboo b) Jati for camping |
| 81 | Matured full length bamboo a) Bhaluka |
| 82 | Antisol red oxide paint for guide channel & other iron structures etc. |
| 83 | Red oxide primer for guide channels& other iron structures etc. etc |
| 84 | Turpentine oil. |
| 85 | Gas cutting kit (including oxygen meter, acetylene meter, cutting torch, regulator etc.) |
| 86 | G.I. wire 22 SWG |
| 87 | M.S. Chain of size 8 mm |
| 88 | Lock & Key , 55 mm |
| 89 | Hacksaw blade 1.5\\" X 12\\" double ended |
| 90 | Gas cutting nozzle. |
| 91 | Hire charge of diesel truck of 2 ton capacity with driver and helper but excluding fuel and lubricant for carrying of various sluice gate materials from workshop to site and vice-versa. |
| 92 | Hire charge of Crane with capacity 3 ton with operator excluding fuel & lubricant. |
| 93 | Hire charge of 25 KVA Diesel Generating Set. With operator and P.O.L. |
| 94 | First Aid kit (comprising of items like Band-Aid, Dettol 100ml, Iodine solution, Antiseptic cream, Scissor, Cotton, Bandage, Burnol, Spray etc. complete). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender