Tender For Construction Of Medical Block, Emergency Ward Alongwith Operation Theatre At Phc Jahu In Tehsil.- Bhoranj, Distt. Hamirpur (H.P). (Part- I Civil Works, (Sub Head : -Civil Works I.E. Construction of Building Portion, W.S & S.I, Septic Tank,
Tender Value
5.40 Crore
Estimated cost
Bid Submission
01 Oct 2026
5 days left
EMD
10.80 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Medical Block, Emergency Ward Alongwith Operation Theatre At Phc Jahu In Tehsil.- Bhoranj, Distt. Hamirpur (H.P). (Part- I Civil Works, (Sub Head : -Civil Works I.E. Construction of Building Portion, W.S & S.I, Septic Tank, Rain Water Harvesting Tank, Boundary Wall And Gate.) Part - Ii :- Electrical Works I.E (Sh:- Providing electrical installation , 1 No Lift There In).
BOQ
| Sl. No. | Item Description |
| 1 | Part-I (Civil Work ) |
| 2 | Excavation work by mechanical means (hydraulic excavator)/ manual in foundation trenches or drains and overall areas in earth work of all kind of soil such as pick work, jumper work, blasting work, jumper blasting work soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting is prohibited, chiseling or any other mixed variety of soil, including shoring, strutting or bailing out water upto any depth or any height quantum of water including dewatering removal of slush and stacking the serviceable and unserviceable material clear from the edge of excavation and as per direction of Engineer-In-Charge and returning the stacked soil in 15 cm (Fifteen centimetre) layers, when required into plinths, side of foundation etcetera consolidating each deposited layer by ramming watering and then disposing of all excavated earth as directed by the Engineer-In-Charge, ( the unuseful material for disposing at dumping site ( to be arranged by the contractor) within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 3 | Supplying and filling in plinth with sand under floors,including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 4 | Providing and Filling in plinth with hard stone under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 5 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:1.5:3 (One cement : one point five sand : three graded stone aggregate 20mm (Twenty millimetre) nominal size) and curing complete excluding cost of form work in Retaining wall/return wall/ breast wall and foundation and plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 6 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in Retaining wall/return wall/ breast wall and foundation and plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 7 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:3:6 (One cement : three sand : six graded stone aggregate) 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in Retaining wall/return wall/ breast wall and foundation and plinth complete complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 8 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (One cement : four sand : eight graded stone aggregate) 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in Retaining wall/return wall/ breast wall and foundation and plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 9 | Providing and laying Damp Proof Course 50mm (Fifty millimetre) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded/crushed stone aggregate) 20mm (Twenty millimetre nominal size) and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 10 | Providing and applying a coat of residual petroleum bitumen of grade VG-10 (Viscosity grade-Ten) of approved quality using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 11 | Making plinth protection 50mm ( fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand : six graded stone aggregate) 20 mm ( twenty millimetre) nominal size) over 75mm( seventy five millimetre) thick bed of dry brick ballast 40 mm ( forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 12 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty five newton per square millimetre) with cement contents not less than @ 360 Per Kilogram / cubic metre (at the rate Three Hundred sixty kilogram per cubic metre) or as per approved design mix. All works above plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 13 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-30 (M-Thirty) design mix to obtain the minimum compressive strength of 30N/mm2 (Thirty newton per square millimetre) with cement contents not less than @ 400 Per Kilogram / cubic metre (at the rate Four Hundred per cubic metre) or as per approved design mix. All works upto plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 14 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-30 (M-Thirty) design mix to obtain the minimum compressive strength of 30N/mm2 (Thirty newton per square millimetre) with cement contents not less than @ 400 Per Kilogram / cubic metre (at the rate Four Hundred per cubic metre) or as per approved design mix. All works above plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 15 | Centering and shuttering including strutting, propping etcetraetera and removal of form work in Foundations, footings, bases for columns including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 16 | Centering and shuttering including strutting, propping etcetraetera and removal of form work for wall ( any thickness) including attached pilasters, buttersses, plinth and string courses etecetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 17 | Centering and shuttering including strutting, propping etcetraetera and removal of form work in Suspended floors, roofs, landings, balconies and access platform including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 18 | Centering and shuttering including strutting, propping etcetraetera and removal of form work for Shelves (Cast in situ) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 19 | Centering and shuttering including strutting, propping etcetraetera and removal of form work in Lintels, beams, plinth beams, girders, bressumers and cantilevers including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 20 | Centering and shuttering including strutting, propping etcetraetera and removal of form work in Columns, piers, abutments, pillars, posts and struts including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 21 | Centering and shuttering including strutting, propping etcetraetera and removal of form work in Stairs, (excluding landings) except spiral stair cases including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 22 | Centering and shuttering including strutting, propping etcetra. and removal of form work for Small lintels not exceeding 1.50 mtr. ( one Point five zero metre ) Clear span modelling as in cornies window sills, string coures, bands, coping, bed plates, anchor blocks and the like including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 23 | Centering and shuttering including strutting, propping etcetraetera and removal of form work in edges of slabs and breaks in floors and walls under 20 cm (twenty centimetre) wide including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 24 | Providing and erection of Tor steel reinforcement Thermo Mechanically Treated bars of grade Fe-550D (five Hundred fifty -D ) of (Sail / TATA Tiscon) for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per approved specifications, drawing, design, as per entire satsfaction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 25 | Providing and construction of square rubble masonry with hard stone in foundation, plinth, retaining or returning/breast walls and other similar works including levelling up with cement concrete 1:6:12 (one cement isto six coarse sand isto twelve graded stone aggregate) 20 mm (twenty millimetre) nominal size) upto plinth level with Cement mortar 1:6 (one cement isto six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 26 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in foundation and plinth above plinth level upto all floor levels, in Cement mortar 1:4 (one cement : four coarse sand) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 27 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure upto all floor levels, in Cement mortar 1:6 (one cement : six coarse sand) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 28 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to all floor level in cement mortar 1:4 ( one cement : four coarse sand) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 29 | Providing and fixing 18 mm (eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetra. complete at all levels. Granite of any colour and shade on Area of slab over 0.50 sqm (zero point five zero square metre) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 30 | Providing and fixing 20mm (twenty millimetre) diametre chromium plated brass Curtain Rod with Knobs at ends having wall thickness of 1.25mm ( one point two five millimetre) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etcetraetra wherever necessary complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 31 | Providing 40x5 mm (forty into five millimetre) flat iron hold fast 40 cm (forty centimetre) long including fixing to frame with 10 mm (ten millimetre) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimetre) 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate 20mm (twenty millimetre) nominal size) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 32 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 Per Kilogram to 80 Per Kilogram (thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (seven hundred one millimetre to one thousand millimetre), with double speed adjustment with necessary accessories and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 33 | Providing and fixing 300x16mm (three hundred into Sixteen millimetre) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 34 | Providing and fixing 250x16mm (two hundred fifty into Sixteen millimetres) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 35 | Providing and fixing aluminium 250x10mm (Two hundred fifty into Ten millimetre) nominal size Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 36 | Providing and fixing aluminium 200x10mm (Two hundred into Ten millimetre) nominal size Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 37 | Providing and fixing 125mm (One hundred twenty five millimetre) nominal size aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 (ten) as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 38 | Providing and fixing 100mm (One hundred millimetre) nominal size aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 (ten) as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 39 | Providing and fixing aluminium hanging floor Single door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 40 | Providing and fixing 19mm (ninteen millimetre) thick water proof termite resistant ply wood of Uniply/ Greenply or Century Ply including shelves and shutters CUP BOARD / KITCHEN CABINATS.The back side of cup boar/cabinet shall be 8mm (eight millimetre) thick waterproof ply as per detail in drawing .All internal surface of Cup board shall be laminated with 1mm (one millimetre) mica of approved shade and cabinets from finished with synthentic enamel paint of approved shade and sample etcetra, complete upto floor all level including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 41 | Providing and fixing 50mm (Fifty milllimetre) special quality bright finished brass cup-board locks or ward robe locks with four levers of approved quality including necessary screws etcetra (Indian make of approved quality) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 42 | Providing and fixing 50mm (Fifty milllimetre) bright finished brass cup-board or ward robe knobs of approved quality including necessary screws etcetra (Indian make of approved quality) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 43 | Prividing and fixing factory made high grade stabilized lead free uPVC profile, multichambered design make VEKA/ FENESTA for thermal and sound insulation with 1.2mm to 1.5mm G.I. (one point two millimetre to one point five millimetre galvanised iron) corrosion resistant galvanised steel reinforcment for strength high quality hardware included rollers , handles, and friction stays, weather resistant termite proof , and low maintenance , dual layer EDPM gaskets for airtight and watertight proformance uPVC white colour casement / casement cum fixed glazed door comprising of uPVC multichambered frame , sash and mullion(wherever required) extruded profile duly reinforced with 1.60 ± 0.2mm (one point six zero pluse minus zero point two millimetre) thick galvaised steel section made from roll forming process of required lengthe(shape and size according to uPVC profile) uPVC extruded glazing beads of appropriate dimension, zink alloy(white powder coated) 3 D (three) hinges and one handle on each side of pannel alongwith zinc plated mild steel multi point locking having transmission gear , cylinder with keeps and one side key , GI fasteners 100x8mm (one hundred into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screw etcetra. Profile of frame and sash shall be mitred cut and fusion at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing wardware's and drainage of water etcetra. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge. Including single/ double glass panes with arogan gas fitted and silicon sealant & including all type of accesories & uPVC pannel shutter & glass shutter in Door. Casement door with top hung ventilator with 3D and S.S friction hinges (400x19x1.9mm) (four hundred into ninteen into one point nine millimetre) made of (big series) frame 67x64mm (sixty seven into sixty four millimetre), sash 67x110mm (sixty seven into one hundred ten millimetre) and mullion 67x80mm (sixty seven into eighty millimetre) all having wall thickness 2.3±0.2mm (two point three plus minus zero point two millimetre) and single glazing bead/ double glazing bead of appropriate dimension with necessary screws and accessories etcetra. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 44 | complete as per approved drawing and direction of Engineer- in -Charge. Including single/ double galss panes with arogan gas fitted and silicon sealant and including all type of assesories and uPVC pannel shutter and glass shutter in Door, Casement door with top hung ventilator with 3D and S.S frictioin hinges ( 400x19x1.9 mm) (four hundred into nineteen into one point nine millimeter) made of big series) frame 67x64mm ( sixty seven into sixty four millimeters) 67x110xmm ( sixty seven into one hundred ten milimeter) and window 67x80 mm ( sixty seven into eighty milimeter all heaving wall thickness 2.3+ -0.2mm ( two point three plus minus zero point two milimeter) and single glazing bead/ double glazing bead of appropriate dimension with necessary srews and acdessories etcetra. complete upto floor all level including entire carriage of material in all lead and lift and as per drawing and technical specifications as per the direction of Engineer-in- charge including all incidentals . he rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 45 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows make of VEKA / FENESTA comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm (one point six zero pluse minus zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm (one hundred into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etcetra. Profile of frame and sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etcetra. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge. This is including of fly wire mesh, S.S solid square bar grill and double glass unit (DGU)of 20mm (twenty millimetre)thick (6+8+6) (six plus eight plus six) and all fittings / accessories. For uPVC frame, sash and mullion extruded profiles minus 5% (five percent) tolerance in dimension i.e. in depth and width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) (three hundred into ninteen into one point nine millimetre) made of (small series) frame 47 x 50 mm (forty seven into fifty millimetre), sash 47 x 68 mm (forty seven into sixty eight millimetre) and mullion 47 x 68 mm (forty seven into sixty eight millimetre) all having wall thickness of 1.9 ± 0.2 mm (one point nine plus minus zero point two millimetre) and single glazing bead of appropriate dimension with necessary screws and accessories etcetra. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 46 | Providing and fixing Second class teak wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diametre and length , including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 47 | Providing and fixing 40mm (Forty millimetre) thick both side commercial phenol bonded ISI Marked flush door shutter of CENTURY/ALPRO/ DURO PLY / GREEN PLY No.1S-2202 non-decorative type, core of block board construction to be finished with mica lamination of approved shade with frame of 1st (first) class hard wood and well matched ply veneering with vertical grain or cross bands and face veneering on both faces of shutters including black enameled Stainless steel butt hinges with necessary screws etcetera complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 48 | Providing and fixing 12mm (Twelve milimetres) thick Phenol bonded (both Side ) prelaminated BWP grade particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 of Action Tesa / Century / Greenlam / Merinolam / Kitlam / Vista of approved shade Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-In-Charge. .The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 49 | Structural steel work (TATA/Apollo/JSW Make ) welded in single / built up section, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete In trusses and trussed purlins in building complete upto floor all level including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-In-Charge. .The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 50 | Providing and fixing M.S. (mild steel) fan clamp type I or II of 16 mm (sixteen millimetre) dia M.S. (mild steel) bar, bent to shape with hooked ends in R.C.C. (reinforced cement concrete) slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-In-Charge. .The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 51 | Providing, fabrication and erection in position structural steel work of Tata / Sail Steel work welded in built up sections, in railling, brackets, gates, gratings framed guard bars, stringers, treads, landings etcetera of stair cases, including use of chequered plate and other similar works wherever required including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetera as required and works as per approved make all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 52 | Providing and fixing MS railing for stair case having balluster of 19mm x19mm (Ninteen millimetre into ninteen millimetre) square bar with a clear height of 85cm (Eighty five centimetre) embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mm x 6mm (Forty millimetre into six millimetre) size complete with a applying priming coat of red lead paint complete (Apollo/Jai Bharat/Tata) including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-In-Charge. .The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 53 | Providing and fixing 50mm (Fifty millimetre) diametre SST (Stainless steel) pipe Of KICH/Nipun/Jindal handrail slip resistant in ramp at two level, having 75cm (Seventy five centimetres) and 90cm (Ninety centimetre) height welded with 25mm (Twenty five millimetres) diametre Stainless steel hollow pipe balusters embedded in cement concrete 60cm (Sixty centimaters) centre to centre and jointing with electrical gas welding at top alongwith hand rail of hollow Stainless steel pipe of 50mm (Fifty millimetres) diametre. It should extend 30cm (Thirty centimetres) beyond top and bottom of the ramp complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 54 | Providing and laying mirror polished 25mm (Twenty five millimetre) thick Kota stone minimum Size 55x55cm (Fifty five into Fifty five centimetre) of uniform colour with 7.5cm (Seven decimal five centimetre) wide black granite band of same shade that of flooring of approved shade as per detail slab flooring over 20 mm (twenty millimetre) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (One cement isto Four coarse sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 55 | Providing and laying Kota stone slabs 20mm (Twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement isto Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 56 | Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 57 | Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 metre including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 58 | Providing and laying exterior graded antiskid vitrified floor tiles of size 45x45cm (forty five into forty five centimetre) minimium thickness 10mm ( ten millimetre) of RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/ JOHNSON of approved shade, laid on 20 mm (twenty millimetre) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with greycement slurry @ 3.3 kg/sqm (at the rate three point three kilogram per square metre) including pointing the joints with white cement and matching pigment etcetra., complete upto floor all level including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 59 | Providing and laying 19 mm (ninteen millimetre) thick Sadar Ali / Red lakha Granite stone flooring in combination with 10/15cm (ten oblique fifteen centimetre) wide flamed Granite band as per pattern and detail laid over 20mm(Twenty millimetre) thickness base of cement mortar 1:4 (One cement : four sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing, etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 60 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300mm (three hundred into three hundred millimetre) minimium thickness 10mm ( ten millimetre) of RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT and BELL/ SIMPOLO/ JOHNSON of approved shade, having with water absorption less than 0.5% (zero point five percent) and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etcetra., laid on 20mm (twenty millimetre) thick base of cement mortar 1:4 (one cement : four coarse sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etcetra. all complete upto floor all level including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 61 | Providing and fixing 2 mm (two millimetre) thick seamless anti dissipative homogenous VIP conductive ESD control vinyl tile flooring of size 600 x 600 mm (six hundred into six hundred millimetre) (thickness to be specified by the manufacturer) of RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT and BELL/ SIMPOLO/ JOHNSON of approved shade of LG hausys with polyurethane conductive adhesive. The joints of the tile floor shall be given U shaped groove with grooving machine to insert welding bars. the tile joints shall be welded by heat fusion process to get seamless floor. all complete upto floor all level including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 62 | Providing and laying 600x600 mm (Six hundred into six hundred millimetres), 10mm (ten millimetre) thick Full body anti skid and high quality germfree Vitrified tiles of Nitco /Kajaria / Simpolo /Johnson / Somany of approved shade and design, in flooring laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement : four sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 63 | Providing and laying 600x 600mm (Six hundred into six hundred millimetre), 10mm (ten millimetre thick) Double Charge vitrified tiles of Nitco /Kajaria / Simpolo /Johnson / Somany of approved shade and design, in flooring laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 64 | Providing and laying 400x400 mm (Four hundred intoFour hundred millimetres), 10mm (ten millimetre) thick Full body anti skid Vitrified tiles of Nitco /Kajaria / Simpolo /Johnson / Somany of approved shade and design, in flooring laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 65 | Providing and laying 300x300 mm (Three hundred into Three hundred millimetres), 10mm (ten millimetre) thick anti skid Ceramic glazed matt finished floor tiles of Nitco /Kajaria / Simpolo /Johnson / Somany of approved shade and design, in flooring laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 66 | Providing and laying 20mm (twenty millimeter) thick rough finished Granite stone (80% (eighty percent) polished and 20% (twenty percent) unpolished) of approved shade, with 5cm (five centimetre) wide flaming band near semi round nosing of treads all complete as per the architectural drawings with 20 mm (twenty millimetre) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etcetra. complete upto floor all level including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 67 | Polished Granite 20 mm (twenty millimetre) thick in walls, risers of steps, skirting, dado and pillars laid on 12 mm (twelve millimetre) (average) thick cement mortar 1:3 (one cement : three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 68 | Providing and laying 600x600 mm (Six hundred into six hundred millimetres), 10mm (ten millimetre) thick vitrified tile of Nitco /Kajaria / Simpolo /Johnson / Somany as per approved shade and design of the office and thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand) jointing with grey cement slurry @ 3.3 Kilogram/ Square metre (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 69 | Providing and laying 300x600mm (Three hundred into Six hundred millimetre), 10mm ( ten millimetre) thick first quality ceramic wall tiles of Nitco /Kajaria / Simpolo /Johnson / Somany in skirting risers of steps and dados with cement mortar 1:3 (One cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 70 | Providing and fixing Armstrong tile of size 600x600x0.50mm (six hundred into six hundred into zero point fifty millimetre) ceiling cassade in power coated G.I frame work as per direction of Engineer-in-Charge (frame work and cover fillets to be measured and paid for separately) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 71 | Providing and fixing kolemetal or equal pre-painted single skin trapezoidal profile sheeting 0.60 mm (zero point sixty millimetre) thickness having the 1060 mm (one thousand sixty millimetre) cover width (over all width 1126mm(one thousand one hundred twenty six millimetre) 28 mm (twenty eight millimetre) crest depth at 353+2 c/c (three hundred fifty three plus two centre to centre) crest distance.there will be two ribs at the centre for stiffening having crest depth of 2.5 mm (two point five millimetre).the main crest width at the top of 25 mm (twenty five millimetre) and at lower 81 mm (eighty one millimetre) base metal of cold rolled steel coil with zinc coating. top coat with regular modified polyester coating of approved shade and balanced revers coat with polyester paint. Fixing of sheet shall be of self drilling and self tapping screw of size 5.5mm (five point five millimetre) (dia) and 5.5mm (five point five millimetre) (length) with EDPM seal. The material supply will be accompanied by test certificate and 20 (twenty) years warranty from company against corrosion fading of colour and manufacturing defects complete in all heights with all accessories as required as per the direction of Engineer-in-Charge and technical specification including carriage of material within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 72 | Providing and fixing factory made ridges or hips having proper gola shape 60 cm (Sixty centimetres) overall with 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheets of Tata Durashine / Sail / Reliance / JSW colouron in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) dia and prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 73 | Providing and fixing valley 60cm (Sixty centimetres) overall 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine / Sail / Reliance / JSW colouron in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) dia with prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 74 | Providing and fixing 30cm.( thirty centimetre) Wide 30cm. (thirty centimetre) Overall semi-circular plain G.I sheet gutters with iron brackets, 40x3 mm (Forty into three milimetre) size bolts and nuts and washer etcetraetera including making necessaary connections with rain-water pipe complete as per the direction of Engineer-in-Charge and technical specification including carriage of material within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 75 | Providing and fixing M.S. B.P. sheet 2.0mm (Two point zero millimetres) thick eaves board/facia/soffits/ceiling of TATA / Jindal / Sail including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-In-charge, (Base members of steel work shall be measured and paid separately) including fixing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 76 | Providing and fixing flushing 38 cm (Thirty eight centimetres) overall with 0.60 mm (Zero point sixty millimetres) thick prepainted sheet of Tata Durashine / Sail / Reliance / JSW colouron in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating and back coat of polyester of 5 microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diameter and prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 77 | Providing and fixing Single socketed pipes 75mm ( seventy five millimetre) diametre having pressure 6.00 kg/cm2 (six kilogram per centimetre square) of Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 (indian standrad:thirteen thousand five hundred ninty two) Type A, including jointing with seal ring conforming to IS : 5382,(indian standrad:five thousand three hundred ninty two) leaving 10 mm ( ten millimetre) gap for thermal expansion complete upto floor all level including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 78 | Providing and fixing Single socketed pipes 110mm ( one hundred ten millimetre) diametre having pressure 6.00 kg/cm2 (six kilogram per centimetre square) of Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 (indian standrad:thirteen thousand five hundred ninty two) Type A, including jointing with seal ring conforming to IS : 5382,(indian standrad:five thousand three hundred ninty two) leaving 10 mm ( ten millimetre) gap for thermal expansion complete upto floor all level including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 79 | Providing and fixing Coupler of 110mm(One hundred ten millimetre) Size diametre having pressure 6.00 kg/cm2 (six kilogram per centimetre square) Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised - PVC (Polyvinyl chloride) (Polyvinyl chloride)moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standard Thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand three hundred eighty two ), leaving 10 mm (ten millimetre) gap for thermal expansion complete upto floor all level including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 80 | Providing and fixing Single Pushfit Coupler of 110mm (One Hundred ten millimetre) diametre having pressure 6.00 kg/cm2 (six kilogram per centimetre square) Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised - PVC (Polyvinyl chloride) (Polyvinyl chloride)moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standard Thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand three hundred eighty two ), leaving 10 mm (ten millimetre) gap for thermal expansion complete upto floor all level including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 81 | Providing and fixing Bend 110mm(One hundred ten millimetre) diametre having pressure 6.00 kg/cm2 (six kilogram per centimetre square) Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised - PVC (Polyvinyl chloride) (Polyvinyl chloride)moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standard Thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand three hundred eighty two ) , leaving 10 mm (ten millimetre) gap for thermal expansion complete upto floor all level including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 82 | Providing and plastering 20mm (Twenty millimetres) thick cement plasters in single coat on rough side of brick/concrete/ stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 83 | Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on rough side of brick/concrete/ stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:4 (One cement isto four sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 84 | Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 85 | Providing and plastering 6mm (Six millimetres) thick cement plaster to ceiling in cement mortar 1:3 (One cement : three sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 86 | Finishing walls with apex weather proof exterior emulsion of approved brand and manufacture on portion of plastered surfaces : two coat including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 87 | Finishing walls with 100%(Hundred percent) Premium acrylic emulsion paint having VOC less than 50 gm/litre ( (fifty gram per litre) and UV resistance as per IS 15489:2004 (indian standard fifteen thousand four hundred eighty nine : two thousand four), Alkali and fungal resistance, dirt resistance exterior paint (ASIAN- APEX ULTIMA /NEROLAC- Wheather Shield) of required shade (Company Depot Tinted) with silicon additives on new work (Two or more coats applied @1.43 litre/ 10 sqm (One point forty three litre per ten square metre) over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm(zero point ninety litre per ten square metre) complete upto floor all level including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 88 | Distempering with synthetic Washable Distemper of approved brand and manufacture to give an even shade on new work (two or more coats) over and including water thinnable priming coat with cement primer of ASIAN/NEROLAC/ICI-DULUX complete upto all floor level including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 89 | Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm) (at the rate three point eighty four kilograme per ten square metere)complete upto all floor level including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 90 | Providing and applying Birla / J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface upto floor all level complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 91 | Providing, laying and jointing glazed stoneware pipe of 250 mm (two hundred fifty millimetre) diameter class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (one cement : one fine sand) including testing of joints etcetra. complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 92 | Painting Wood work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.75 ltr/ 10 sqm (at the rate of zero point seventy five litre per ten square metre) of approved brand and manufacture ( ASAIN/NEROLAC/ICI-DULUX ) complete upto all floor level including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 93 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate of zero point eighty litre per ten square metre) of approved brand and manufacture ( ASAIN/NEROLAC/ICI-DULUX ) complete upto all floor level including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 94 | Providing and fixing 40mm (forty millimetre) wide 20 mm (twenty millimetre) thick granite stone strip moulding above panneling work / tile work / other similar work, including machine polishing to edge to give high gloss finish etcetra complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 95 | Providing and fixing powder coated/anodised aluminium work for frame of doors, windows, ventilators and glazed partitions of Jindal / Hindalco aluminium with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera (Section No. 14081 of Jindal / Hindalco etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 96 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket etcetra complete (JINDAL/HINDALCO/BALCO) as per the architectural drawings and the directions of engineer- in-charge . With float glass panes of 5.00 mm (five millimetre) thickness weight not less than 12.50 kg / sqm (twelve point fifty kilogram per square metre) complete upto floor all level including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 97 | Providing and laying cement concrete in parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etcetra., up to floor five level, excluding the cost of centering, shuttering and finishing :1:1½:3 (one cement : one and half coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size) complete upto floor all level including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 98 | Extra for plastering done on moulding, cornices or architraves including neat finish to line and level : In one coat complete upto floor all level including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 99 | Providing and laying 60mm (Sixty millimetre) thick factory made cement concrete interlocking paver block of NTC make of M-40 (M-forty) grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern of NTC make or its equivalnent and including 50mm (fifty millimetre) thick compacted bed of coarse sand, filling the joints with fine sand etcetera all complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 100 | Providing and laying water proofing treatment made of pidilite/ Asian in sunken portion of WCs, bathroom etcetera, by applying cement slurry mixed with water proofing cement compound consisting of applying:i) Ist course of applying cement slurry @ 0.488 kg/sqm (at the rate zero decimal four eight eight kilogram per square metre) mixed with water proofing compound @ 0.253 Per Kilogram/ Per square metre (at the rate zero decimal two five three kilogram per square metre). This layer will be allowed to air cure for 4 (four) hours. ii) Second layer of slurry of cement @ 0.242kg/sqm (at the rate zero decimal two four two Kilogram Per square metre) mixed with water proofing cement compound @ 0.126kg/sqm (at the rate zero decimal one two six Kilogram/Per square metre). This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 101 | Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm (zero point fifty five millimetre) thick) having a knurled web of 51.55 mm (fifty one point fifty five millimetre) and two flanges of 26 mm (twenty six millimetre) each with lips of 10.55 mm (ten point fifty five millimetre), placed @ 610 mm C/C (at the rate six hundred ten millimetre centre to centre) in perimeter channel having one flange of 20 mm (twenty millimetre) and another flange of 30 mm (thirty millimetre) with thickness of 0.55 mm (zero point fifty five millimetre) and web of length 27 mm (twenty seven millimetre). Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C (at the rate six hundred ten millimetre centre to centre) with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm (twenty five millimetre) countersunk ribbed head screws @ 200 mm C/C (at the rate two hundred millimetre centre to centre), all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing: Unistone cladding complete upto floor all level including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 102 | Providing and fixing airport-type waiting chair, three-seater, made of powder-coated MS frame with perforated stainless steel/aluminium seats and backrest, complete with armrests, support legs, all fittings and accessories, finished in approved shade, including installation at site complete upto floor all level including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 103 | Constructing soak pit 1.20 x1.20 x1.20 x 1.25mm (One point two zero into one point two zero into one point two five millimetre) filled with brick bats including S.W. drain pipe 100mm (One hundred millimetre) and 1.20m (One point two zero metre) long as per design complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 104 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality LD-2.5 ( two point five) circular shape 450 mm (four hundred fifty millimetre) internal diametre complete complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 105 | Providing and construction of random rubble masonry with hard stone in foundation, plinth, retaining or returning/breast walls and other similar works including levelling up with cement concrete 1:6:12 (one cement isto six coarse sand isto twelve graded stone aggregate 20 mm (twenty millimetre) nominal size) upto plinth level with Cement mortar 1:6 (one cement isto six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 106 | SANITARY FITTINGS AND FIXTURES |
| 107 | Excavating trenches of required width for pipes, cables, etcetera including excavation for sockets, and dressing of sides, ramming of bottoms, upto any depth including getting out the excavated soil, then returning the soil as required, in layers not exceeding 20 cm (Twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etcetera and disposing of surplus materials/excavated soil as per specification, approved drawing, design, specification and as per the entire satisfaction of Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 108 | Providing and fixing water closet squatting pan (Indian type W.C. pan )White Vitreous china Orissa pattern W.C. pan no ECS-WHT-451, of size 440 x 575 x 250 mm (Four hundred forty into five hundred seventy five into two hundred fifty millimetre) with integral type foot rests with 100 mm (One hundred millimetre) sand cast Iron P or S trap, 10 litre (Ten litre) low level P.V.C. flushing cistern,of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 109 | Providing and fixing vitreous china pedestal type/wash down floor mounted water closet (WC) with size 475x370x420 mm (four hundred sevenety five into three hundred seventy into four hundred twenty millimetre) model no. 92076 white colour studio set along with 8mm (eight millimetre) diametre C.P/ S.S JET, SEAT COVER, Flushing CISTERN 10 ltr. (ten litre) capacity and twin flushing valves etcetera complete in all respect, water closet (European Type - WC pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 ( one cement, one sand) (with cistern, seat cover and flush fitting) Star White of Jaguar of snow white/star white shade / Hindware / Neyeer /Cera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 110 | Providing and fixing vitreous china pedestal type/wash down floor mounted water closet (WC) with size 475x370x420 mm (four hundred sevenety five into three hundred seventy into four hundred twenty millimetre) model no. 92076 white colour studio set along with 8mm (eight millimetre) diametre C.P/ S.S JET, SEAT COVER, Flushing CISTERN 10 ltr. (ten litre) capacity and twin flushing valves etcetera complete in all respect, water closet (European Type Single seat - WC pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 ( one cement, one sand) (with cistern, seat cover and flush fitting) Star White of Jaguar of snow white/star white shade / Hindware / Neyeer /Cera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 111 | Providing and fixing 565x450x195mm (Five hundred Sixty five into four hundred fifty into one hundred ninety five millimetre), having model no. CNS-WHT-811 pedestal type wash basin of Hindware/ Cera/ Jaquar as per details with C.P. brass pillar taps, 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 112 | Providing and fixing 600x400x185mm (Six hundred into four hundred millimetre into one hundred eighty five millimetre ), SLS-WHT-6601 counter top wash basin of Hindware/ Cera/ Jaquar as per details with C.P. brass pillar taps, 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 113 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin (CERA, Parryware, Hindware, Sanitaryware) of 430x260x350 mm ( four hundred thirty into two hundred sixty into three hundred fifty millimetre) and 340x410x265 mm (three hundred forty into four hundred ten into two hundredsixty five millimetre) sizes respectively with automatic flushing cistern with standard flush pipe and C.P. Brass spreaders with brass unions and G.I clamps complete, including painting offittings and brackets, cutting and making good the walls and floors whereve: One urinal basin with 5 litre (five liter) white P.V.C.(Polyvinyl chloride) automatic flushing cistern complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 114 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings of Jaquar/Parryware/Hindware make complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 115 | Providing and fixing Stainless Steel A ISI 304 (18/8) (three hundred four (eighteen/eight)) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm (forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen Sink with drain Board 510x1040 mm (five hundred ten into one thousand forty millimetre) bowl depth 250mm (two hundred fifty millietre) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 116 | Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1.00 (one) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make ( Jaquare Opal series) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 117 | Providing and fixing 32 mm (Thirty two millimetre) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings (Finolex/Supreme make) flexible pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 118 | Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass mounted on 6mm (Six millimeters) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 119 | Providing and fixing 600x120x5 mm (Six hundred into one hundred twenty into five millimetre) glass shelf of Jaquar / Hindware / Cera / Kerovite and Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm (Forty millimetre) long screws, rawl plugs etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 120 | Providing and fixing C.P. brass toilet paper Holder including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 121 | Providing and fixing 110mm (One hundred ten millimetre) diametre Finolex/Relpipe (Reliance)/Vectus pressure shall not be less than 6.00 kg/cm2 (six kilogram per centimetre square) PVC Spigot and Socket, waste and ventilating pipe ISI marked including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 122 | Providing and fixing 75mm (Seventy five millimetre) diametre Finolex/Relpipe (Reliance)/Vectus pressure shall not be less than 6.00 kg/cm2 (six kilogram per centimetre square) PVC Spigot and Socket, waste and ventilating pipe ISI marked including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 123 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter P.V.C clamps of Finolex / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 124 | Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter P.V.C clamps of Finolex / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 125 | Providing and fixing 110mm (one hundred ten millimetre) diametre P.V.C single equal branch with oval access door of Finolex / Vectus with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 126 | Providing and fixing 75mm (Seventy five millimetre) diametre P.V.C single equal branch oval access door of Finolex / Vectus with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 127 | Providing and fixing 110mm (one hundred ten millimetre) diametre P.V.C single equal branch plain of Finolex / Vectus with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 128 | Providing and fixing 75mm (Seventy five millimetre) diametre P.V.C single equal branch plain of Finolex / Vectus with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 129 | Providing and fixing 110mm (One hundred ten millimetre) diametre P.V.C double equal branch of Finolex / Vectus with insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 130 | Providing and fixing 75mm (Seventy five millimetre) diametre P.V.C double equal branch of Finolex / Vectus with insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 131 | Providing and fixing 110mm (One hundred ten millimetre) diametre P.V.C plain double equal branch with oval access door, of Finolex / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 132 | Providing and fixing 75mm (Seventy five millimetre) diametre P.V.C plain double equal branch with oval access door, of Finolex / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 133 | Providing and fixing 110mm (One hundred ten millimetre) diametre PVC door bend with oval access door, of Finolex / Vectus insertion rubber washer 3 mm (Three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 134 | Providing and fixing 75mm (Seventy five millimetre) diametre PVC door bend with oval access door, of Finolex / Vectus insertion rubber washer 3 mm (Three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 135 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter P.V.C cowl of Finolex / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 136 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter Plain bend ISI marked of Finolex / Vectus including fixing with approved adhesive complete. including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 137 | Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter Plain bend ISI marked of Finolex / Vectus including fixing with approved adhesive complete. including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 138 | Providing and fixing 110x75mm (One hundred into seventy five millimetre) nominal size ISI marked P.V.C floor trap of Finolex / Vectus of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 139 | Providing and fixing 600 mm (six hundred millimetre) long PTMT towel rail with total length of 645 mm,(six hundred fourty five millimetre) width 78 mm (seventy eight millimetre) and effective height of 88 mm,(eighty eigth millimetre) weighing not less than 190 gms.(one hundred ninety grams) PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. including necessary plaster and pointing in cement mortar 1:4 (one cement : four coarse sand) including cost of cutting and making good the walls and floors :complete upto floor all level including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 140 | Providing and fixing 1216 (16mm (sixteen millimetre) OD pipe Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C (Eighty degree celcius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 metre (One metre) spacing for concealed works, including cutting chases, testing the joint and making good the wall etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 141 | Providing and fixing 1620 (20mm (Twenty millimetre) OD pipe Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C (Eighty degree celcius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 metre (One metre) spacing for concealed works, including cutting chases, testing the joint and making good the wall etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 142 | Providing and fixing 15 mm (fifteen millimetre) nominal bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etcetraetera Internal work and Exposed on wall including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 143 | Providing and fixing 20 mm (twenty millimetre) nomina bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etcetra. Internal work and Exposed on wall including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 144 | Making connection of galvanized mild steel distribution branch with galvanized mild steel main 25mm to 40mm (Twenty five milimetre to Forty milimetre) nominal bore by providing and fixing tees including cutting and threading the pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 145 | Fixing water metre and stop cock 200 mm (two hundred millimetre) nominal bore in G.I. (Galvanized Iron ) pipe line including cutting and threading the pipe and making long screws etcetraetera complete ( cost of water metre and stop stop cock to be paid seprately) complete upto floor all level including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 146 | Providing and fixing 20mm (Twenty millimetre) size Ball Valve (brass) of approved quality, High or low pressure, with plastic floats complete of Jindal /Tata /Zoloto/ UNIK make including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 147 | Providing and fixing 25mm (Twenty five millimetre) size Ball Valve (brass) of approved quality, High or low pressure, with plastic floats complete of Jindal /Tata /Zoloto/ UNIK make including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 148 | Providing and fixing PVC connection pipe ISI marked 45cm (forty five centimetre) long and 15mm (fifteen millimetre) nominal bore with brass unions complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 149 | Constructing masonry Chamber 30x30x50 cm (thirty into thirty into fifty centimetre) inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm ( one hundred into one hundred into seventy five millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size including necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate 40mm (forty millimetre) nominal size and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm (twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (seven point five) including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 150 | Providing and fixing 15mm ( fifteen millimetre) nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etcetra. complete (New work) including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 151 | Providing and fixing 20mm (twenty millimetre) nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etcetra. complete (New work) including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 152 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of Finolex / Vectus/ Astral having tripple layer of IS No: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including fittings but excluding the base support for tank complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 153 | Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass bib cock of conforming to IS:8931 of Jaquar / Hindware / Cera / Kerovite and Jal of approved quality (superior or heavy type) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 154 | Providing and fixing 15mm (Fifteen millimetres) diametre PTMT Push cock tap of conforming to IS:8931 of Jaquar / Hindware / Cera / Kerovite and Jal of approved quality (superior or heavy type) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 155 | Providing and fixing 15 mm (Fifteen millimetres) nominal bore, C.P. brass long body bib cock with Mixer for kitchen sink of approved quality conforming to IS standards and weighing not less than 690 gms (Six hundred ninety grams) Jaquar / Hindware / Cera / Kerovite and Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 156 | Providing and fixing 15mm (Fifteen millimeter) diametre C.P. brass stop cock (concealed) of standard design and of approved make of Jaquar / Hindware / Cera / Kerovite and Jal conforming to IS:8931 including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 157 | Providing and fixing PTMT soap Dish Holder having length of 138mm (one hundred thirty eight millimetre), breadth 102mm (one hundred two millimetre), height of 75mm (seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 (one hundered six) gram of appro ved make of Jaquar / Hindware / Cera / Kerovite and Jal conforming to IS:8931 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 158 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 90x80 cm (ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg ( fifteen kilogram) With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 159 | Providing and fixing touch free Sensor pillar tap made of hindware or its equivalent standard design and of approved make conforming to IS:8931 including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 160 | Part-II (Electrical Work) |
| 161 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5(One point five square millimetre) sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed Heavy class PVC Conduit ISI marked , with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.(One point five square millimetre) FRLS PVC insulated copper conductor single core cable etc as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:- Anchor (Roma classic )/L&T(Entice)/Legrand(Myrius) as approved by Er-In-Charge.(five year warranty ) Group c |
| 162 | Wiring for twin control light point with 1.5 sq.mm (One point five square millimetre) FRLS PVC insulated copper conductor single core cable in surface / recessed Heavy class PVC Conduit having , 2 (two ) way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm(One point five square millimetre) . FRLS PVC insulated copper conductor single core cable etc as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Make:- Anchor (Roma classic )/L&T(Entice)/Legrand(Myrius) as approved by Er-In-Charge. (five year warranty ) |
| 163 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 (One point five square millimetre) sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit heavy duty ISI marked, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Make:- Anchor (Roma classic )/L&T(Entice)/Legrand(Myrius) as approved by Er-In-Charge. Group- c |
| 164 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. Including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. .Make :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge.(five year warranty ) |
| 165 | 5/6 amp ( five oblique six ampere) Modular switch |
| 166 | 5 pin 5/6 amp ( five oblique six ampere) socket outlet |
| 167 | Telephone socket |
| 168 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 5/6 amps ( five pin five oblique six ampere) modular socket outlet and 5/6(five oblique six ampere) amps modular switch, connection etc. as required. all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. .Make :-Anchor (Romaclassic),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge.(five year warranty ) |
| 169 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 amps ( three pin five oblique six ampere) modular socket outlets and 2 nos 5 pin 5/6 ( five pin five oblique six ampere) amps modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena as approved by Engineer-In-Charge. |
| 170 | Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps ( six pin five oblique six ampere and fifteen oblique sixteen ampere)modular socket outlet and 15/16 amps (fifteen oblique sixteen ampre ) modular switch, connection etc. as required.all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena as approved by Engineer-In-Charge . |
| 171 | Supplying and fixing suitable size GI box with modular plate and cover in FRLS on surface or in recess, including providing and fixing 2 (two) nos 6 pin 5/6 & 15/16 amps( six pin five oblique six ampere and fifteen oblique sixteen ampere) modular socket outlet and 2 nos , 15/16 (fifteen oblique sixteen ampre ) amps modular switch, connection etc. as required all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. .Make :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge.(five year warranty ) |
| 172 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 3 nos. 3 pin 5/6( three pin five oblique six ampere) amps modular socket outlets and 3 nos 5/6( five oblique six ampere) amps modular switches and 1 nos. 3 pin 15/16(fifteen oblique sixteen ampre ) amps modular socket outlets and 1 nos 15/16 amps modular switche , connection etc. as required. (For light plugs to be used in non residential buildings) all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. .Make :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge.(five year warranty ) |
| 173 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess i/c providing and fixing 25 amp modular socket outlet and 25 Amps modular SP MCB, “C” curve including connection, painting etc. as required.ll rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. .Make :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge.(five year warranty ) |
| 174 | Supplying and fixing Computer board comprising 3 nos 5 amp ( Three number five ampere ) modular switches and Sockets , G.I box 2 module for jack box and G.I Box 12 ( twelve) module for 5 amp ( five ampere) switchs and 5 amp ( five ampere) sockets comprising frame and cover plate for each 2 ( two) module metal box and 12 ( twelve) module metal box , one no computer jack (RJ-45) with shutter including connections etcetera as required all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 175 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class PVC conduit ISI markedas required all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. .Make:- Plaza/Anchor/Polycab/Finolex as approved by Engineer -in -charge . |
| 176 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire( two into one point five square millimetre plus one into one point five square millimeter ) |
| 177 | 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire( two into two point five square millimetre plus one into one point five square millimeter ) |
| 178 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire( two into four square millimetre plus one into four square millimeter ) |
| 179 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire(Two into six square millimetre Plus one into six square millimetre) |
| 180 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire(Two into ten square millimetre Plus one into six square millimetre) |
| 181 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire ( four into six square millimetre plus two into six square millimeter ) |
| 182 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire ( four into ten square millimetre plus two into six square millimeter ) |
| 183 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire( four into sixteen square millimetre plus two into six square millimeter ) |
| 184 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Including five year warrantyMake:- KEI/Anchor/Polycab/Finolex as approved by Engineer -in -charge . |
| 185 | 3 x 1.5 sq. mm(three into one point five square millimetre) |
| 186 | 3 x 2.5 sq. mm ( three into two point five square millimetre) |
| 187 | 3 x 4 sq. mm ( three into four square millimetre) |
| 188 | Supplying and fixing of following sizes of Heavy class FRLS PVC Conduit along with accessories in surface/recess including cutting the wall and making good as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make :- Diplast/BEC/Polyfit or as approved by Er-In-Charge(for Networking, CCTV, Fire alarm etc.) |
| 189 | 25 mm(twenty five millimeter ) |
| 190 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable,IS 7098 1.1 KV grade of following sizes on wall surface with appropriate size lugs, glund as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:-KEI,POLYCAB, havells ,finolex as approved by Er-in-charge.(five year warranty ) |
| 191 | 120 sqmm (3.5 core)(one hundred twenty square milimeter ) |
| 192 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:-KEI,POLYCAB, havells ,finolex as approved by Er-in-charge. (five year warranty ) |
| 193 | 120 qmm (3.5core)(one hundred twenty square milimeter ) |
| 194 | Supplying and fixing Ding Dong bell suitable for single phase, 230 volts, complete as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge (five year warranty ) |
| 195 | Providing, Installation, testing and commissioning of BLDC ceiling fan including five year warranty with socket type 2 module regulator,including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mmt win twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.Five star rating including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Make:- Usha (Technoaire BLDC without remote),Bajaj,Crompton as approved by Er-In-Charge(FIVE YEAR WARRANTY) |
| 196 | Ceiling Fan 1200 mm (one thousand two hundred millimeter ) sweep |
| 197 | Providing and installation exhaust fan of 300mm (L/D)(three hundred millimeter ) size in the existing opening,including making the hole to suit the size of the above fan, making good thedamages, connections, testing and commissioning etc. as required: including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Make:- Usha/Bajaj/Crompton as approved by Er-in-charge(Five year warranty) |
| 198 | Providing and installation exhaust fan with five year warranty of 300 mm (Plastic body) size in the existing opening,including making the hole to suit the size of the above fan, making good thedamages, connections, testing and commissioning etc. as required: including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:- Usha,Bajaj,Crompton as approved by Er-in-charge.(Five year warranty) |
| 199 | Supplying and fixing exhaust fan louver shutter for 300 mm.(three hundred millimeter )exhaust fan on the existing wall,painting etc, as required,including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. |
| 200 | Providing and Installation of 400 mm(four hundred millimeter ) air circulator metal body on wall with heavy duty motor Providing, Installation, testing and commissioning of wall fan of aluminium blades ,rust free, following size by means of suitable rag-bolt/ nuts, connections, testing and commissioning etc. as required complete in all respects to the best satisfaction of Engineer-in-charge .including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.(Five year warranty) |
| 201 | Supply and fixing of led downlighter in 12 W +/- 1 (plus oblique minus one )W LED Recess/surface Mounted Downlighter Round Shape with minimum system lumen efficacy of 110 lm/W and system lumen 1320lm with Pressure Die cast Aluminium Housing and HET diffuser and P.F.>0.95 (graeter point nine five )THD<10%(less ten percent ) CCT 5700K, CRI 80, IP20 optical compartement.The LED with Useful life of 50000 Hrs at L70. The Input voltage range shall be 150V to 270V (one hundred fifty volt to two hundred seventy volt ).Fixture have Surge Protection 2kV .Driver complete with all accessories, connections, testing and commissioning etc.as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Make:- Philips/Wipro/Trilux/LT as approved by Engineer-in-Charge.(five year warranty ) |
| 202 | Supply and fixing of led downlighter in 15 W +/- 1 W(plus oblique minus one ) LED Recess/surface Mounted Downlighter Round Shape with minimum system lumen efficacy of 110 lm/W and system lumen 1650lm with Pressure Die cast Aluminium Housing and HET diffuser and P.F.>0.95 (graeter point nine five ),THD<10%(less ten percent ) ,CCT 5700K, CRI 80, IP20 optical compartement.The LED with Useful life of 50000 Hrs at L70. The Input voltage range shall be 150V to 270V (one hundred fifty volt to two hundred seventy volt ).Fixture have Surge Protection 2kV .Driver complete with all accessories, connections, testing and commissioning etc.as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:- Philips, Wipro/LT as approved by Engineer-in-Charge. (five year warranty ) |
| 203 | Supply and fixing of backlit non slim surface/Recess led downlighter in 24 W +/- 1 (plus oblique minus one ) W in Round Shape with with minimum system lumen efficacy of 120 lm/W and minimum system lumens 2880 lumen with Pressure Die cast Aluminium heat sink with and HET diffuser and polycarbonate mounting box P.F.>0.95 (graeter point nine five ) ,THD<10%(less ten percent ) ,CCT 5700K/4000K, CRI 80,IP20 protection.The LED with Useful life of 50000 Hrs at L70. The Input voltage range shall be 150V to 270V (one hundred fifty volt to two hundred seventy volt ).Fixture have Surge Protection 2.5 (two point five )kV .Driver including ,hanging arrangement ,complete in all respect.all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:- Philips, Wipro/LT as approved by Engineer-in-Charge. (five year warranty ) |
| 204 | Supply and fixing of Led fixture 600mmX600mm (six hundred millimetre into six hundred millimetre 36W+/- 1 (plus oblique minus one watt )W Recess/Surface Mounted with HET diffuser with minimum system lumen efficacy of 120lm/W and system lumen of 4320lm with CRCA Housing and with P.F.>0.95(graeter point nine five ),THD<10%(less ten percent ) ,CCT 5700 K/4000K, internal surge protection 2.5KV with input voltage range of 150V-270V(one hundred fifty volt to two hundred seventy volt ),CRI 80.The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs at L70, connections, testing and commissioning etc as complete in all respectall rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Make Philips/Wipro/LT as approved by Engineer-in-Charge.(five year warranty) |
| 205 | Supply and fixing of IP20 Batten Led fixture 2FT 10 W+/- 1 (plus oblique minus one watt )W with Surface Mounted 4 Feet with aluminium housing and Polycarbonate diffuser,minimum system efficacy of 100lm/W with P.F.>0.95 with THD<20% (less twenty percent ) ,CCT6500 K,CRI 80,Surge Protection 2 Kv, IP20.The LED with Useful life of 50000 Hrs at L70. The Input voltage range shall be 150V to 270V(one hundred fifty volt to two hundred seventy volt ).including ,hanging arrangement ,complete in all respect all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.. Make Philips/Wipro/Jaquar/panasonic or or its equivalent as approved by Engineer-in-Charge.(five year warranty) |
| 206 | Supply and fixing of street light 60 W+/-1 (plus oblique minus one watt )W luminaire with Tiltable arrangement, DIE-CAST Aluminum extruded housing with powder coating, PC lens diffuser, minimum system lumen efficacy 145 lm/W and availability beam angle of 120 degree. The luminaire shall have IP66 protection. The LED shall be compliant with Useful L70B50 life of >75000 Hrs. Driver efficiency should be 85% in input voltage range of 140V to 280V(one hundred forty volt to two hundred eighty volt ) with 10KV external surge protection including ,hanging arrangement ,complete in all respect.all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:- Philips, Wipro/LT as approved by Engineer-in-Charge. (five year warranty ) |
| 207 | Supply and fixing of IP66 Bulkhead led fixture 10 W(+/- 5%)(plus oblique minus five percent ) Wall Mounted having system lumen output 1100 lumens minimum system lumen efficacy of 110 lm/W with Pressure Die Cast Aluminum housing, Polycarbonate Opal Diffuser and P.F.>0.95 with THD<10%(greater ten percent percent ) ,CRI 80.The LED shall be Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of 4000K \with CRI of minimum 80.The Input voltage range shall be 140V to 270V (one hundred forty volt to two hundred seventy volt )with 2.5 (two point five ) kV Surge Protection. including ,hanging arrangement ,complete in all respect. all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:- Philips, Wipro/LT as approved by Engineer-in-Charge. (five year warranty ) |
| 208 | Supply and fixing of IP20 Smart PIR Occupancy Sensor having 360 degree Detection Pattern with maximum dectection Diameter of 6 meters at maximum height of 4 meters haviing Power consumption of 1.8 (one point eight ) Watt with Off Delay Timing of 1-90 minutes complete with all accessories, connections, testing and commissioning etc.as required. complete with all accessories, connections, testing and commissioning etc.as required. all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:- Philips, Wipro/LT as approved by Engineer-in-Charge. (five year warranty ) |
| 209 | Providing and installation of stationary storage type Electric water heater (Geyser) WITH KNOB CONTOL of various sizes by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:-Usha,jaquar,Bajaj,Recold or as approved by Er-in-charge .( Five year warranty) |
| 210 | 15 Liter capacity water heater (Cat-A) |
| 211 | 25 Liter capacity water heater (Cat-A) |
| 212 | Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation made from (50 mm x 50 mm x 6 mm thick) (fifty millimeter into fifty millimeter into six millimeter) M.S. angle iron frame, covered with 1.6 mm (one point six millimeter ) thick M.S. sheet duly welded on five sides & front side hinged, complete with locking arrangement with sufficient No. vertical and horizontal intermediate switchgear supporting members each of M.S. flat 50mmx6mm ( fifty millimeter into six millimeter) thick of suitable length duly welded. The cubical pedestal shall have cable entry box at one or two sides and 4 No. legs of 50mmx50mmx6mm (fifty millimeter into fifty millimeter into six millimeter) thick M.S. angle iron each 60 cm long including, powder coated painting and bonding to the existing earth etc., the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 (fifteen centimeter )cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm(fifteen centimeter from the top of cement concrete plat-form:-The panel should be approved /Tested from the CPRI lab.& should confirmed to ISI: 64139 I)including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. |
| 213 | 300 mm (Three hundred millimeter ) deep. |
| 214 | Providing and fixing 315AMP (three hundred fifteen ) , four pole, 415 (four hundred fifteen ) volts, On-Load change over switch on open execution , front handle operation, including making connections, etc. as required. five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Make:- L&T, Legrand, Hager, ABB as approved by Er-In-Charge (five year warranty) |
| 215 | Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and including terminal spreaders in cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Make:- L&T, Legrand, Hager, ABB as approved by Er-In-Charge (five year warranty) |
| 216 | 32 amp -18KA (thirty two ) amp ,18 (eighteen ) KA. |
| 217 | 63 amp -18KA (sixty three ) amp ,18 (eighteen ) KA. |
| 218 | 80A 18 kA (eighty ) amp ,18 (eighteen ) KA. |
| 219 | 300 A, 36 KA (three hundred )amp ,(thirty six )KA |
| 220 | Supplying and fixing , 240/415 volts, 10 kA, “C” curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.)including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Make:- L&T Cat. No. (SL96072, Legrand, Hager, ABB as approved by Er-In-Charge (five year warranty) |
| 221 | Single pole 5-32 amp |
| 222 | TPN 40-AMP Beaking capacity 10 kA |
| 223 | Supplying and erection of 40/50/63 (forty oblique fifty oblique sixty three ) amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of double poles in the existing MCB DB complete with connections etc. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Make:- L&T, Legrand, Hager, ABB as approved by Er-In-Charge (five year warranty) |
| 224 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,10 KA residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:- L&T, Legrand, Hager, ABB as approved by Er-In-Charge (five year warranty) |
| 225 | 40 AMP |
| 226 | 63 AMP |
| 227 | Supplying and fixing of Segregated tripple pole and neutral surface/ recess mounting, 7 Segment 415volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, with provision to mount MCCB incomer, DP MCB/RCCB sub-incomer ineach phase and SP MCBs as outgoing (but without MCB ’s and incomer),complete with tinned copper din-bar, wire-set, neutral link, earth bar, detachable gland plate, cable interconnections, including earthing etc. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:- L&T, Legrand, Hager, ABB as approved by Er-In-Charge (five year warranty) |
| 228 | Segregated tripple pole and neutral 6 ways |
| 229 | Segregated tripple pole and neutral 8 ways |
| 230 | Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/recess, complete with tinned copper bus bar, neutral busbar, earth bar,din bar, detachable gland plate, interconnections, with appropriate rating copper lugs, gland , powder painted including earthing etc. as required. (But withoutMCB/RCCB/Isolator)including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:- L&T, Legrand, Hager, ABB as approved by Er-In-Charge (five year warranty) |
| 231 | MCBDB 8 WAY Double Door |
| 232 | MCBDB 12WAY Double Door |
| 233 | MCBDB 16WAY Double Door |
| 234 | Supplying and fixing copper strip bus-bars suitable for following size & cross sectional area 415 volts capacity 4 No. each in the existing enclosure with all accessories including connections etc. as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. |
| 235 | Copper Bus Bar 400 Amp (38.10mmx6.35mm) (Thirty eight point one millimetre into six point three five ) |
| 236 | Copper Bus Bar 100 Amp (25.4mmx3.17mm) (Twenty five point four millimetre into three point one seven ) |
| 237 | Copper Bus Bar 63 Amp (20.4x3.17mm)(Twenty four point four millimetre into three point one seven ) |
| 238 | Supplying and fixing of Ammeter L&T flush mounting 96x96 (ninety six into ninety six millimetre ) mm inbuilt selector switch CT/PT site programmabe accuracy Class 1.0,0.5 complete with connection,testing and commissioning etc as required(five year warranty) all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:-L&T,Legrand,Hagger , ABBr or its equivalent as approved by Engineer-in -charge. |
| 239 | Supplying and fixing of Voltmeter L&T flush mounting 96x96(ninety six into ninety six millimetre ) mm inbuilt selector switch CT/PT site programmabe accuracy Class 1.0,0.5 complete with connection ;testing and commissioning etc as required(five year warranty). all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:-L&T,Legrand,Hagger , ABB or its equivalent as approved by Engineer-in -charge. |
| 240 | S/F indicator set R Y & B with 3 (three )Nos Kit kat (LED type) to shown the three indicating in the existing pannel complete etc as required.including five year warranty.Make:- L&T, Legrand, Hager, ABB as approved by Er-In-Charge all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. |
| 241 | S/F Shock treatment chart on the existing wall etc as required including carriage of material within all leads and lift.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. |
| 242 | supplying and fixing CT coil 600/5 (six hundred oblique five ) amp with burden of VA 15 (fifteen ) accuracy class -1 all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:- Automatic Electric Ltd/L&T/Legrand as approved by E-in- charge.including five year warranty |
| 243 | P/F rubber mat 1x 2 (one into two ) meter long 12 (twelve millimeter ) mm thick infront of main panel as required including carriage of material with in all leads and lift.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. |
| 244 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm (six hundred milliumeter into six hundred millimeter into three millimeter )thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 (two point seven ) Meter long etc. with charcoal/ coke and salt as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. . |
| 245 | Supplying and laying hollow pure copper lighting arrestor 2mtr copper electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer )including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.(five year warranty ) |
| 246 | Providing and fixing 20mm x 3mm (twenty millimeter into three millimeter ) copper strip on surface or in recess for earth connections etc. as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. |
| 247 | Providing and fixing 4.00 (four millimeter ) mm dia copper wire on surface or in recess for loop earthing as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. |
| 248 | Online UPS- Input supply: Three Phase, Output supply: Three Phase Supplying, installation, Testing & Commissioning of of following capacity at full load (Unity Power Factor) at operating temperature 0 to 40 deg C, Relative humidity 0 to 95%,(ninety five percent Online double conversion true sine wave Uninterrupted hot swapable (allow for the replacement or addition of battery modules without shutting down the entire system) modular Power Supply (UPS) system with N+1 modules (N denotes total number of moduels requird for rated capacity). The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch alongwith provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc. UPS shall have inbuilt phase sequence correction. The UPS systems offered are to be of the latest technology with Digital Control Microprocessor based for reliable operation using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter (3 Level) with PWM (Pulse Width Modulation). The quality of design, manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >96% (greater ninety six percent ) while operating on battery mode and delivering quality power to the 100% (hundred percent ) non-linear loads. Current total harmonic effect(ITHD) on the input grid shall be < 5% (less five percent) at 50% (fifty percent )load. (The required LC ( inductor (L) and a capacitor (C)) filters shall be included in UPS cost), extreme power factor kit to be included to limit the input power factor |
| 249 | (PF) to 0.99 (point nine nine )and output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ), however UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be suitable for incoming supply AC : 3Phase 400V +/-20%, (plus oblique minus twenty percent )50 Hz +/-5 Hz, AC Output voltage: 3Phase 415 Volt, 50 Hz +/-0.2Hz, Overload capacity of 120% (one hundred twenty percent ) for 10 mins, Sine wave output. Non condensing, noise level less than 60db at 1 meter distance, protections: Input Under voltage over voltage, abnormal out voltage, battery over charging, output over current, short circuit protection, battery deep discharge protection, 10KV surge. UPS must comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part I and Part 2, it shall be a Voltage and Frequency Independent (VFI)-type UPS. . Communication RS232/RS485/SNMP port open protocol for BMS integration, all hardware & software for iOT Communication as per approved by Engineering in charge. Required battery racks and interconnecting copper conductor cables of suitable size and connectors and all required accoseries are inclusive of the cost). This system must provide a means for logging and alarming of all monitored points plus email notification. Forced air-cooling with integral inbuilt fans with redundancy (if one fan fail UPS should be able to handle at least 80% of the load, Noise Level 65 DB at 1 meter distance. The system shall be in compliance IEC 62040- 1,2 & 3, IS: 16242 and CPWD Specification. Display Panel (minimum) (In-build 5 inch or more LC Display / LED ) to display : a) Input: Voltage, current, Frequency. b) Bypass: Voltage, Frequency. c) Output: Voltage, frequency, Current. d) Battery: Voltage, Capacity. e) Load: KVA, KW, Percentage. f)Temperature: STS, Inverter, PFC. g) Event Logging & Statistical Data (On LCD/LED): UPS should capture and display up to 3000 events like: Over temperature / DC Bus Fail / Fan Fail / Fuse Fail / Overload / Short-circuit / Device Fail/ Inverter Fail / Rectifier Fail / Bypass Fail, etc. h) Statistical Data: No. of power failures / Transfers to Bypass / Total Running time, etc. i) Mains Mode of Operation/Battery Mode of Operation / Bypass feeding the load / UPS Fault /Battery charging and discharging, overload, battery voltage and battery capacity. j) Audible Alarms: Mains Failure, Battery Low Alarm, UPS Overload, Fault, Shutdown, Input Over, Under Voltage, Output Over, Under Voltage, Battery Over, Under Voltage, Over Load and short circuit, Over Temperature. The UPS should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location etc. |
| 250 | This system must provide a means for logging and alarming of all monitored points plus email notification. Forced air-cooling with integral inbuilt fans with redundancy (if one fan fail UPS should be able to handle at least 80% of the load, Noise Level 65 DB at 1 meter distance. The system shall be in compliance IEC 62040- 1,2 & 3, IS: 16242 and CPWD Specification. Display Panel(minimum) (In-build 5 inch or more LC Display / LED) to display : a) Input: Voltage,current,Frequency. b) Bypass: Voltage, Frequency. c)Output: Voltage, frequency, Current. d) Battery:Voltage, Capacity. e) Load: KVA, KW, Percentage.f) Temperature: STS, Inverter, PFC. g) Event Logging & Statistical Data (On LCD/LED): UPS should capture and display up to 3000 events like: Over temperature / DC Bus Fail / Fan Fail / Fuse Fail / Overload / Short-circuit / Device Fail / Inverter Fail / Rectifier Fail / Bypass Fail, etc. h) StatisticalData: No. of power failures / Transfers to Bypass / Total Running time, etc. i) Mains Mode of Operation /Battery Mode of Operation / Bypass feeding the load / UPS Fault /Battery charging and discharging, overload, battery voltage and battery capacity. j) Audible Alarms : Mains Failure, Battery Low Alarm,UPS Overload, Fault, Shutdown, Input Over, UnderVoltage, Output Over, Under Voltage, Battery Over,Under Voltage, Over Load and short circuit, Over Temperature. The UPS should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location etc with Quaterly one number service five year including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:- APC/Legrand-Numeric/Emerson-Vertiv/ETON as approved by E-in- charge. (five year warranty ) |
| 251 | 20KVA (Each Power module shall be < 10 (less ten ) KVA) |
| 252 | Providing and commissioning of self supporting stool type ladder heavy duty made out of aluminium section of 115 mm ribbed nonislip steps with large plateform of size 482x380 mm (four hundred eighty two millimeter into three hundred eighty millimeter ) ,150mm (one hundred fifty millimeter ) brake type tyre castors for easy movement ,handrails 1 meter railing height from plateform for climbing comfort,guard rail 1 meter railing height from plate form complete in all respect as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Required size 8 ft Height. |
| 253 | Supplying and fixing of DLP 105x50 mm (one hundred five into fifty millimeter ) PVC adaptable trunking on the exiting wall at required height from lower level for power connection, light connection and net working connection including partition chip flexible cover end cap .including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make:-Legrand ,MK as approved by Engineer-in charge. |
| 254 | Supplying and fixing Surge protection device protection against indirect/direct lighting surges maxiumum dicharge current- I max upto 50 KA/ 3 pole+neutral Type 1+2 .including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make :L&T,Legrand ,Hager, ABB or its equivalent as approved by Engineer-in -charge.(FIVE YEAR WARRANTY) |
| 255 | Supplying and fixing 8-port 10/100/1000 ( ten oblique one hundred oblique one thousand)Mbps Unmanaged standalone gigabit switch in desk top (green ethernet) for getting blazing speed of giga bite that delivers power performance and reliability i.e increasing the speed of net work server in large in switching protocol storing and forwarding as required all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Make:- D-Link(Code No DGS-1008A) Digilink, Cisco as approved by Engineer-in-Charge. |
| 256 | Supply, Installation, Testing & Commissioning of CAT6 UTP 23AWG Solid LSZH/FRPVC as per Specifications complete in all respect as required. including conections,as required within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Make Finolexc , Dlink, Polycab or its equivalent as approved by Er-In-Charge (five year warranty ) |
| 257 | Supplying and fixing Loaded Wall- Wall Mount 2u Dimensions-5540-GR-DVR wall rack 2U-400D ,Unloaded Mounting Rail with U-Marking welded Side walls !U Cable Manager (1) Hardware Packet (1Pkt) 3 socket 5amp .power distribution Unit(1NO) all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Make:- D-Link(Code No DGS-1100-08 )/Cisco/Digi linkt as approved by Engineer-in-Charge. |
| 258 | Supplying and fixing 1.5 (one point five ) ton invertor split type air conditioner Hot and Cold with five year warranty , advanced filter ,E saver mode , quit mode, dual display ,auto clean ,anti bacteria filter jet Cool on/off timer sleep mode compressor cord less remote complete in all respect as per comprising to ISI with latest amendment suitable to operate on 230 volt /240 volt +_ 10 % (plus minus ten percent ) AC supply capable to perform the function of cooling dehumidification air circulation ventilation and fitting in size of nominal cooling capacity and drain pipe 20 mm (twenty millimeter ) dia approximately 3mtrs long 2 nos copper pipe with insulator for inlet and outlet approximatey 3 mtrs long including carrigae of material with in with in all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Make -Daikin (Model:FTHT50), O General/ Mitsubishi, Voltas as approved by the Engineer Charge.Warranty on product one year,on PCB five year & on compressor 10 year. |
| 259 | Supplying and fixing of voltage stabilizer 4 KVA , 1.5 (one point five ) ton AC having specification Input voltage range 130-300 (one hundred thirty volt to three hundred volt ) volt ,Digital display,Under voltadge Protection,Over voltage protection including connections, testing and commissioning as required within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Make:- Whirlpool /Microtek /V Gaurd or its equivalent as approved by Er-in-charge(Three year warranty) |
| 260 | Supplying, Installation, Testing and Commissioning of 1 No 24 passenger with machine room traction elevator of with the following specifications and features. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST.Make :- Johnson ,KONE ,OTIS, THYSSEN, MITSUBHSHI, |
| 261 | Type and Capacity : 1632 (one thousand six hundred thirty two ) Kg, 24 Passengers |
| 262 | Speed : 1.25 (one point five ) meter per second |
| 263 | Travel :- 17 (seventeen ) mtr(approx.) |
| 264 | Controller : Microprocessor |
| 265 | Serving:- G+4/ 5 stop with all opening on all same side. |
| 266 | Hoist way Dimensions:- :-(JOHNSON;-2350 MM W X 3000MM D) (two thousand three hundred fifty millimeter wide into three thousand millimeter dia) |
| 267 | Head Room Required :- ( JOHNSON;-48 METER) |
| 268 | PIT Depth:-(JOHNSON :-1600 MM) (one thousand six hundred millimeter ) |
| 269 | CAR SIZE:-(JOHNSON;-1500 (one thousand five hundred millimeter ) mmWx2400 (two thousand four hundred millimeter )mmDx2200 (two thousand two hundred ) mm ) |
| 270 | CAR ENCLOSURE:- Constructed out of S.S. panels with Honey comb finish |
| 271 | CAR ENTRANCE:- Two speed slide side opening automatic S.S. panels in Honey comb finish with a clear opening |
| 272 | CAR & HOISTWAY DOOR TYPE:-Central opening power operated landing door in SS 1.5 MM (one point five millimeter ) Honey comb. |
| 273 | DOOR OPENING:-(JOHNSON:-1000 (one thousand millimeter ) MM W X2000 (two thousand millimeter ) H |
| 274 | DOOR OPERATION:- Automatic D.C. door operation with adjustable door opening & closing timing |
| 275 | POWER SUPPLY :- 400/415 (four hundred oblique four hundred fifteen ) Volts, 3 Phase, A.C. supply, 50 Hzs |
| 276 | FAN :- 1 No with 300 mm(three hundred millimeter ) sweep |
| 277 | FLOORING :- GRANITE |
| 278 | LIGHTING :- orange LED Illumination. |
| 279 | INDICATORS:- dot matrix LED D & P Indicators in car . |
| 280 | Details :- |
| 281 | Motor compatible for 180 starts per hour. |
| 282 | Car operating panel with luminious floor button in car |
| 283 | Automatic Break Testing |
| 284 | Battery operated alarm bell and emergency light |
| 285 | Fireman's switch and fire rated door for 120 minutes. |
| 286 | Over load warning device Voice announcement . |
| 287 | Control panel on one side in the car and hall button panel at each landing with Stainless Steel (Hair line finish) |
| 288 | Automatic Rescue Device complete with dry maintenance free batteries as required |
| 289 | Hand rail on all thethree sides at 900mm(nine hundred millimeter ) above floor level to be fixed in the lift car. |
| 290 | Voice announcement system (English) in the car to announce the position of the elevator in the hoist way as the car passesor stops at each floors .Thes System should work during ARD operation also. |
| 291 | Braille buttons for visually challenged persons inside the car and landings. Height of car operating panel& panel at landingshall beas per Harmonised guidelines for lifts issued by MOUD. |
| 292 | Intercom facilityLift car :- Inbuilt intercom Reception & Lobby:1No each for lift passenger to speak with reception/ attendant with portability to connect with building inter come system |
| 293 | Visual floor indication shall be provided above the lift car door anda bove the landing doors. |
| 294 | Automatic phase reversal device and over voltage protection device |
| 295 | Feature Dtetails :- Anti nuisance car call projection, idependent service (simplex), overload device, door nudging, emergency fireman's control switch, emergency car light unit, infrared curtain door projection, door time projection, emergency alaram button, extra door time of lobby & parking, belt/rope inspetion drive, auto fan cut off, audible car call button, door open/close button, manual rescue operation, belt/rope call projection, seimic sensor, automatic rescue operation voice synthesizer, pit ladder, intercom. All signal fixtures in stainless steel faceplates. |
| 296 | The prices of complete job as per the specifications above shall be inclusive of steel Items, minor Building work, Scaffolding etc. All sundry fittings, assemblies, accessories, Hardware items, foundation bolts, terminal lugs for electrical connections as required, and items which are useful and necessary for proper assembly and efficient working of various components shall be deemed to have been included in this job, whether such items are specifically mentioned in the tender documents or not including free service of one year.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax or other taxes as imposed by the Govt time to time where applicalble but excluding of GST. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender