Tender For Stock Storage (Sh:- Construction of Store Room In The Premises Of Jsv Inspection Hut At Bbmb Colony In Tehsil Sundernagar).
Tender Value
4.83 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
1 days left
EMD
9700
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Stock Storage (Sh:- Construction of Store Room In The Premises Of Jsv Inspection Hut At Bbmb Colony In Tehsil Sundernagar).
BOQ
| Sl. No. | Item Description |
| 1 | Demolition above G.L. upto floor two level including disposal of unserviceable materials within 20 Metres lead and including cutting the necessary reinforcement and separating out from R.C.C./R.B. works. |
| 2 | Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mtrs. and removal of the same for in-situ reinforced concretre and plain concrete work in all leads and lifts in: Flat surfaces such as soffits of suspended floors,roofs, landings and the like in floor etc. upto 200mm thickness. |
| 3 | Edges of slab and breaks in floors and walls under 20 cm wide complete in all respect in all leads and lifts. |
| 4 | Brick work using common burnt clay building bricks in super structure upto floor two level in cement mortar 1:6 (1cement: 6sand) in all leads and lifts. 2nd class bricks in all leads and lifts as per the direction of Engineer-In-Charge. |
| 5 | Providing and laying cement concrete 1:2:4(1Cement :2 sand:4 graded crushed stone aggregate 20mm nominal size and curing completre excluding the cost of form work and reinforcement for reinforced concrete work in all leads and lifts in: Suspended floors, roofs, landing, shelves and their supports balconies, lintels, beams girders bresumers and cantilevers upto all floor two level . |
| 6 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level including all leads and lifts. |
| 7 | Providing wood work in frames of door, windowc, clerestory windows and other frames wrought, framed and fixed in position. 2nd class deodar wood. |
| 8 | Providing 40x3 mm flat iron hold fast 40mm. Long including fixing to frame with 10m diameter bolts nuts and wooden plugs and embeding in cement concrete block/brick work 30x10x15cm. 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) |
| 9 | 6mm cement plaster to ceiling in CM 1:3 ( 1Cement :3 Sand) complete in all respect. |
| 10 | 15mm cement plaster in single coat on rough side of brick/concrete stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:3 (1 cement:3 sand) complete in all respect. |
| 11 | Providing and fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestory windows,including black enamelled iron butt hinges with necessary screws. 40 mm thick. 2nd class deodar wood. |
| 12 | Providing and fixing wire gauge shutters using galvanised M.S wire gauge of I.S gauge designation 85 G. with wire of dia 0.56mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 40mm thick 2nd class deodar wood. |
| 13 | Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. 250 *16 mm |
| 14 | Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete. 250 * 10 mm |
| 15 | 150 * 10 mm |
| 16 | Providing and fixing aluminium handles anodized transparent or dyed to required colour shade with necessary screws etc. complete. 125 mm |
| 17 | 100 mm |
| 18 | White washing with lime on undecorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt , dust and other foreign matters. |
| 19 | Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease , dirt and other foreign matters, sand papering and knotting ready mixed paint brushing wood primer pink in all leads and lifts. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender