Tender For Provision Of Fire Down Comer System Booster Pump Fire Detection And Alarm System Fire Extinguishers And Signage At Sdh Kamakhyanagar Health Instituation Of Dhenkanal District Buildings.
Tender Value
25.95 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
15 days left
EMD
26000
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhenkanal → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Fire Down Comer System Booster Pump Fire Detection And Alarm System Fire Extinguishers And Signage At Sdh Kamakhyanagar Health Instituation Of Dhenkanal District Buildings.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, installation, testing and commissioning of Electric Motor Driven Pressurization Terrace Pump having discharge of 450 LPM at 35 Mtr head complete with Pump Set, Electric Motor suitable for operation on 415 V ,3 ph, 50 c/s AC supply , Base Frame, with RCC foundation for motor as per the manufacturer's standard installation specification.The installation height of motor must be above 450 mm. Make-Wilo/KSB/Kirloskar/Grundfoss |
| 2 | Supply, installation, testing and commissioning of CPRI Approved Floor/Wall mounted sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base frame, complete with all accessories including interconnections, earth bus etc as required comprising of One (1)- 63 Amp, 10 KA,TPN (Class-C) MPCB with 3 Nos Phase indicating lamps with control fuse/ MCB, Digital Voltmeter with selector switch. DOL starter with O/L and Single Phasing Preventor suitable for 7.5 HP motor. ON/OFF/TRIP indication lamps, Auto manual switch, provision for interlocking with pressure switch should be provided and ON/OFF push button.as per direction of engineer in charge.make-Legrand/schneider/Siemens/ABB |
| 3 | Supplying, Installing, Testing and commissioning of 1100 V GRADE POWER/CONTROL CABLES :SITC of FRLS, PVC outer sheateh, steel armoured, aluminium, 1100v grade power cables with glands etc. The minimum size of the cables shall as mentioned below as per direction of engineer in charge Make - Polycab / KEI/Gloster/RR kabel/Havells/Finolex2 C x 1.5 mmsq |
| 4 | 3 C x 10 Sq.mm |
| 5 | PIPE & VALVES ETC. Supplying, installation testing and commissioning of the following-: C class MS Pipe as per IS1239 for underground/over ground pipes with welded / flanged connection with saddles, supports (all with screwed/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, specials like sockets, union nuts, elbows, reducers, plugs, Tees etc. Complete to make the system operative as required by LFA / TAC authorities the pipes will have to be laid and fixed in trenches. The work includes excavation in all types of soils and back filling, dewatering, etc., making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the client and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for overheads pipes and providing and fixing pipe coat (corrosion protection tape) including supply and application of pipe coating and spiral Wrapping for underground piping (wrapping should have overlap of 15 to 20 mm) etc.Complete as per ASTM standards/IS: 10221 for corrosion protection of pipes for the underground installation.Note: The piping installation has to be put to hydraulic test to1.5 times the working pressure & as per latest applicable codes & standard before applying paint or pipe coating or wrapping etc. complete.Make-TATA/JINDAL/SAIL 100mm NB |
| 6 | 80mm NB |
| 7 | 25mm nb |
| 8 | Providing, fixing, testing and commissioning of following size manually operated hand lever type cast iron double flanged slim seal wafer type Butterfly valves with EPDM iron disc as per IS-13095 having pressure ratting PN -1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of E.I.C. Make-Zoloto/AUDCO/Leader 100mm NB |
| 9 | Providing, fitting & fixing of following size cast iron double flanged type dual plate Non return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of Engineer-in-charge. Make-Zoloto/AUDCO/Leader 100mm NB |
| 10 | SITC of Gun metal chrome finished Ball valves with fittings of screwed end type.Make. Kartar/newage/Safeguard 15mm dia |
| 11 | 25mm dia |
| 12 | Supplying and fixing of automatic air release valve with unions etc. complete.Make.Kartar/minimax/fireShield/Newage |
| 13 | Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves of suitable size with all accessories as per direction of Engineer-in-charge.Make-H.Guru/G.Guru |
| 14 | Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off bronze ball valves with integral strainer & flare nut (mixed ends) of suitable size with all accessories as per direction of Engineer-in-charge.Make-Danfoss/Indfoss/Grundfoss |
| 15 | Supply,Installation,Testing & Commissioning of stainless steel strainer fabricated out of 1.6 mm thick stainless steel sheet Y Stainer with 3 mm dia hloes with stainless steel flange as required. Make-Zoloto/AUDCO/Leader 100mm NB |
| 16 | DOWN COMER SYSTEM Supply,Installation,Testing & Commissioning of Stainless steel Hydrant Valve / Landing valve, of 63 mm NB size, type-A, single headed , oblique type, as per IS :5290/93 and as per direction of Engineer-in-charge.Make-Minimax/Newage/Fireshield/Safex/Omex. |
| 17 | Supply,Installation,Testing & Commissioning of SS short branch pipe with 63 mm male inlet and 19 mm outlet nozzle, as per IS:903 and as per direction of Engineer-in-charge.Make-Minimax/Newage/Fireshield/Safex/Omex. |
| 18 | Supply,Installation,Testing & Commissioning of 63 mm NB and 15meter long RRL Fire Hose fitted with 63mm intstantaneous stainless steel male & female SS coupling, complete by GI wire binding for Internal Hydrant as per direction of Engineer-in-charge. Make-Minimax/Newage/Fireshield/Safex/Omex. |
| 19 | Providing supply & fixing of MS Hose Box for of suitable size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-charge. Make-Minimax/Newage/Fireshield/Safex/Omex. |
| 20 | Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 20 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I., complete with all accessories as per direction of Engineer-in-charge. Make-Minimax/Newage/Fireshield/Safex/Omex. |
| 21 | Providing, fitting and fixing of C.I. 25 MM single air relief valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of Engineer-in-charge. |
| 22 | Providing, fitting & fixing of 4-Way GM fire brigade connection consisting of 63 mm dia instantaneous type male couplings with built-in check valves, 150mm dia flanged outlet complete with bolts, nuts and rubber insertions confirming to IS:904 with ISI mark including testing & commissioning the system etc. all complete as per apporoved specification & direction of EIC. Make-Zoloto/Karatr/Kirloskar |
| 23 | Fire detection and alarm system Supply, Installation,Testing & Commisioning of Microprocessor based Addresable fire alarm control panel , fully networkable with each loop capable of taking 99 devices, 8 line x 40 character alpha- numeric liquid crystal display .The panel shall be soft addressable type . The panel shall be able to give pin point location of all fire/fault conditions. Further, the panel must be able to automatically switch off respective control switches when ever any alarm is triggered. The panel shall have integral SMF lead acid batteries with sealed cells of 24 V capable of running for a minimum of 8 hours with integral battery charger complete as required and as per specification. The fire alarm panel shall be suitable for software integration with BMS & PA system.Make-Morley IAS/Siemens/Bosch 4 Loop Panel |
| 24 | Supplying, installing, testing and commissioning of Addressable Manual Call Point with back box.Make-Morley IAS/Siemens/Bosch |
| 25 | Supplying, installing, testing and commissioning of Analogue Addressable Loop powered Sounder with strobe light.Make-Morley IAS/Siemens/Bosch |
| 26 | Supplying, installing, testing and commissioning of photo electric (optical) smoke detector with base, junction box and other accessories.Make-Morley IAS/Siemens/Bosch |
| 27 | Supplying, installing, testing and commissioning of rate of rise heat detector with base, junction box and other accessories.Make-Morley IAS/Siemens/Bosch |
| 28 | Supplying, installing, testing and commissioning of 2C x 1.5 mm², armoured, single stand, outer sheathed, FRLS, PVC insulated copper conductor cable confirming to specified IS standards .Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI |
| 29 | Supplying, installing, testing and commissioning approved make pvc conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc.25mm dia (Make-AKG/Precision) |
| 30 | EXTINGUISHER SYSTEM Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS : 2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Make- Safex/ Fireshield/Kanex/ Ceasefire/Flameklog.4.5 kg capacity |
| 31 | FIRE EXTINGUISHERS :- Providing and fixing ABC type fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Make- Safex/ Fireshield/Kanex/ Ceasefire/Flameklog 6 kg capacity |
| 32 | SITC of 2 kg capacity Eco friendly stored pressure type filled with HFC 236(Clean agent fire extinguisher having zero ozone depletion potential) clean agent fire extinguisher s with safety seal,pressure gauge, controlable discharge mechanism helium leak detection tested and confirming to IS:15683 complete with initial charge as required. Make : Fireshield/Kanex/ Safex/ ceasefire/Flameklog |
| 33 | Providing and Fixing of Mechanical Foam type fire extinguisher 9Lts. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure CO2 gas cartridge, hose and ABS type branch pipe and wall mounting bracket etc. complete, confirming to IS: 15683.Make-Safex/Fireshield/Ceasefire |
| 34 | Supplying and installing at approved location approved make fire buckets at 24 gauge galvanized stseel sheet, standard 9 liters capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letter \\"FIRE\\" in black and gold. Cost shall be inclusive of Providing MS stand duly painted over a coat of primer (one stand shall be suitable for hanging 5 buckets. |
| 35 | SIGNAGES Providing and installing in position the following tupe of sign boards made out of 3mm thick \\"Opaque\\" PVC foam board with computer cut. PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners. Make-Bajaj/Prolite Floor identification signage (i.e, GROUND FLOOR ETC.,) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5cm with contrasting colour from back ground. Size shall be 15cm * 60cm. |
| 36 | Fire Exit signage at each stair on every floor, indicating the direction of fire exit, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 45cm. |
| 37 | Providing and fixing in position the signage of \\" Fire Extinguisher \\" to be fixed above the every extinguisher. Size 6\\" x 8\\" |
| 38 | Providing and fixing in position the signage of \\" Fire Hydrant & Hose Reel \\" to be fixed near the every fire shaft at all floors. . Size 6\\" x 8\\" |
| 39 | Providing and fixing the signages \\"Main fire alarm panel\\".& Fire Pump Room |
| 40 | Providing and fixing the signages \\"Assembly point - with symbol ( A2 Size)\\" - Size 17\\" x 22\\" |
| 41 | Illumination Glow light for Exit Indication with Battery Back-up. |
| 42 | S/F of evacuation plan- outer cover 3 mm thick photolluminiscent plastic, paint highest quality UV resistant glass paint frame Aluminium made material non-radioactive, non phosphorous, non-toxic and laed free , glowing time > 3000 mins luminance 215mcd/sqm warranty 5 years as the direction of Eng-in-charge(A1) size on steel frame with cc work. |
| 43 | S/F of evacuation plan- outer cover 3 mm thick photolluminiscent plastic, paint highest quality UV resistant glass paint frame Aluminium made material non-radioactive, non phosphorous, non-toxic and laed free , glowing time >3000 mins luminance 215mcd/sqm warranty 5 years as the direction of Eng-in-charge(A3) size on steel frame with cc work. |
| 44 | Supply and Installationof 5000 ltr. triple layer plastic water storage tank for fire fighting hydrant system to be placed at terace level. Make: Mukta/Sintex/Plasto |
| 45 | Supply and Fixing of Structural steel like MS Beam (ISMB) 200 X 100, MS Channel (ISMC) 100 X 50 X 5, MS Angle ISA 65 X 65 X 6, MS Angle ISA 40 X 40 X 5, MS Sheet 2500 mm x 1250 mm x 2 mm & Plate 200 x 200 x 12 mm including one coats of primer and two coats of signal red colour with all accessories at terrace level for foundation of 5,000 ltr PVC tank. Make: SAIL/RINL/MSP |
| 46 | GI Shed over fire pump to protect the fire pump from rain water in terace level. |
| 47 | Supply and Installationof u pvc (32mm) Pipe & Solvent |
| 48 | Supply and Installation of GI hex nipple both side threaded for tank connection 100 mm |
| 49 | Supply and Installation of GI socket 100 mm |
| 50 | Supply and installation of float valve Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender