Tender For Construction Of D Type Staff Quarter Building At Govt. Ayurvedic Dispensary At Anala In The District Of Dhenkanal
Tender Value
31.64 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
3 days left
EMD
31650
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhenkanal → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of D Type Staff Quarter Building At Govt. Ayurvedic Dispensary At Anala In The District Of Dhenkanal
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation in hard soil with all leads & lifts including rough dressing &levelling bed & depositing the excavated material away from the working site as directed by Engineer in charge. |
| 2 | Filling foundation & plinth With sand well watered and rammed etc complete as directed by the engineer-in-charge. |
| 3 | Providing cement concrete (1:3:6) with nominal size stone aggregates for CC works including all cost etc. complete as directed by the engineer-in-charge. |
| 4 | RCC work of M-25 grade with 20mm and down graded black hard granite (C.B) stone chip[s including hoisting and laying. as directed by the Engineer-in-charge. (Column/Footing/Base (G.F)). |
| 5 | Column(G.F) |
| 6 | Roof Slab(G.F) |
| 7 | Plinth Band(G.F) |
| 8 | RCC Lintel(G.F) |
| 9 | Roof Beam(G.F) |
| 10 | RCC Chhajah(G.F) |
| 11 | Fly Brick masonary in foundation with c.m (1:6) in foundation and Plinth using Flyash.Bricks 250 x 120 x 80mm size watering ,curing etc complete including cost of materials, labour all comp. including all cost of materials etc. complete and as directed by the Engineer-in-charge. |
| 12 | G.F-Fly Brick masonary in super structure CM(1:6) including all cost of materials etc. complete and as directed by the engineer-in-charge. |
| 13 | G.F-Cutting, bending, binding of MS rods and tying the grills and placing in position including cost of steel and binding wire and as directed by the Engineer-in-charge. |
| 14 | G.F-12mm thick CP in CM (1:6) including all cost of materials etc. complete and as directed by the Engineer-in-charge. |
| 15 | G.F-16mm thick CP in CM (1:6) including all cost of materials etc. complete and as directed by the Engineer-in-charge. |
| 16 | F.F-20mm thick cement plaster (1:4) over wall top including all cost etc. complete and as directed by the Engineer-in-charge. |
| 17 | G.F-Fixing tiles in vetrified floors on 25mm th CP (1:1) jointed with neat cement slury mixed with pigment etc. complete and as directed by the Engineer-in-charge. |
| 18 | G.F-Fixing tiles in dados and skirting and risers of steps on 12mm th CP (1:3) jointed with neat cement slury mixed with pigment etc. complete and as directed by the Engineer-in-charge. |
| 19 | Chequered tile |
| 20 | G.F Door Chaukat with shutter made out of MS angles and sheet including all cost etc. complete and as directed by the Engineer-in-charge. |
| 21 | G.F Window Chaukat with shutter made out of MS angles and sheet including all cost etc. complete and as directed by the Engineer-in-charge. |
| 22 | G.F MS grill gate etc. including all cost etc. complete and as directed by the Engineer-in-charge. |
| 23 | Providing and fixing of WPC door frames with rebate cuts and finished cross section size 75mm x 45mm or 90mm x 50mm, including cost of all materials, cost of all labour conveyance, taxes, loading, unloading scaffolding, slaging watering and curing, T&P, etc, complete as per the direction of the Engineer-in-charge. |
| 24 | Supplying , fitting & fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thk laminate on both side of approved design and quality including cost of all door fittings and fixtures etc, complete. |
| 25 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/ NCL VEKA LTD.). Ventilator/ Top Hung-60-Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM, weathering seal resistant accessories, like clipping Jocking system tone including cost and conveyance of all materials, accessories, labour charges, materials Nuotiosoite pine thermobninstalled at the nonaktsmeners, silicon rubber sealant, easy glazing/deglazing at site etc..and product conforming to ASTM D 638-14.EN-477-95 and other applicable codes and standards. |
| 26 | Providing supplying fitting fixing of 5cm thick Precast RCC jally in ventilators/ Skylights with all cost labour T&P etc complete as per the direction of the E.I.C. |
| 27 | G.F -Finishing wall surface with Acrylic wall putty (water based) of approved make including all cost etc. complete and as directed by the Engineer-in-charge. |
| 28 | G.F -Painting two coat to the new surface of iron work with one coat primer including all cost of paint primer etc. complete and as directed by the Engineer-in-charge. |
| 29 | G.F -Supplying and applying weather coat on outside walls two coats with any approved shade of weather coat including all cost etc. complete and as directed by the Engineer-in-charge. |
| 30 | G.F Distempering two coats with any approved shade of distemper including all cost of materials etc. complete and as directed by the Engineer-in-charge. |
| 31 | G.F-Priming one coat with approved Water Bound Wall cement Primer on Plastered Surface of approved make including all cost etc. complete and as directed by the Engineer-in-charge. |
| 32 | G.F -Providing and fixing rain water down pipe with necessary bend shoes and heads including cost of 75 mm dia earthen pipe,clamps, and nails etc. with all cost ,conveying taxes of all the materials required for the work with all labour, T&P and cess etc. completed in all respect as per specification and direction of the Engineer-in-charge |
| 33 | Construction of embankment with approved material obtained from borrow pits with all lift and leads transporting to site by mechanical means within a lead of 5kms spereading grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H Specifications for Road & Bridge works (4th revision) etc. completed in all respect as per specification and direction of the Engineer-in-charge |
| 34 | PCC(1:2:4) using 12mm size hg chips including all cost of materials, labours etc. complete and as directed by the Engineer-in-charge. |
| 35 | Construction of granular sub-base by providing close graded granular sub base Grading III material as per table 401-1, spreading in uniform layer with moter grader on prepared surface, mixing by mix in place method with rotavator at OMC ,and compacting with vibratory roller to achieve the desired density complete as per clause 401 of MoSRT&H Specification for Road & Bridge works (4 th Revision) as directed by the Engineer-in-charge. |
| 36 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including pre mixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works (4th Revision). as directed by the Engineer-in-charge. |
| 37 | Providing and laying of Interlocking Concrete Block pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504. as directed by the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender