Tender For Provision Of Water Filtration Plant Room As Well As Certain Minor Works At Cpe Itarsi Under Ge Bhopal
Tender Value
26.77 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
13 days left
EMD
54000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Water Filtration Plant Room As Well As Certain Minor Works At Cpe Itarsi Under Ge Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | M & L for lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing, complete all as specified and directed. |
| 3 | M&L for 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and directed. |
| 4 | Excavation in post holes (or similar holes) each n exc 0.5cum, getting out soft/loose soil and returning , filling and ramming earth or broken rubble mixed with earth with around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface, complete all as specified and directed. |
| 5 | Excavation in trenches in any type of soil, n.exc 1.50 M wide and n.exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out soft/loose soil in any type of soil complete all as directed. |
| 6 | Excavating over areas,under floor n exc 1.5m deep and getting out soft/loose soil of below floor complete all as specified and directed. |
| 7 | Returning filling in including spreading,levelling,watering and well ramming in layers not exe 25 CM complete all as specified and directed. |
| 8 | Removing excavated material n exc 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and directed. |
| 9 | M&L for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) in foundations filling and mass concrete, complete all as specified and directed. |
| 10 | M&L for cement concrete (1:4:8) TY-D2 as in foundations, filling and mass concrete, complete all as specified and directed. |
| 11 | Supply and fix roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats and necessary welding works etc Fe 410-W(GdeE- 250) quality-A complete all as specified and as directed. |
| 12 | M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in coping including use of formwork, complete all as specified and directed. |
| 13 | S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 14 | S&F Mild steel conforming to Fe 410 -W (GdeE- 250) quality A Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed. |
| 15 | Forming construction/dummy joint 100mm deep x 10mm wide filled with sealed compound grade \\"A\\" complete all as specified and directed. |
| 16 | Material and labour for two coat of synthetic enamal paint over a coat of red oxide primer on steel surface of any description,over 10cm widht or girth incl preparation of new surfaces all specified and directed. |
| 17 | M&L for brick work with sub class B modular brick straight or curved on plan nexc 6cm mean radius built in CM 1:6 complete all as specified and directed. |
| 18 | M&l for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | Material and labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 20 | Material and labour for Hardcore Broken stone or boulder of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 10 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 21 | M&L 75 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base and complete all as spciified and directed. |
| 22 | M&L 100 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base for sett pavings complete all as spciified and directed. |
| 23 | Material and labour for 100 mm thick cement concrete type B2, 1:2:4 (using 40mm graded stone aggregate) including finishing cement concrete surface even and smooth without using extra cement complete all as spciified and directed. |
| 24 | M&L for three coats of white wash on newly plastered surfaces of wall including preparation of surfaces all as specified and directed. |
| 25 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out soft/loose soil, complete all as specified and directed. |
| 26 | M&L for rendering 15mm thick on fair faces mixing with water proofing compound as per manufacturer instruction (water proofing compound paid for seperately) of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 27 | Supply only integral water proofing compound of approved ISI mark as per specified and directed. |
| 28 | Preparation of newly plastered surface wall of any description and applying two coat of cement base paint over a coat of cement primer complete all as specified and directed. |
| 29 | Removing excavated material n exc 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and directed. |
| 30 | M&L for hardcore of guage n exc. 63mm, deposited spread and levelled in layers n exc 10cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 31 | M&L for 100mm thick cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) laid in floor finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 32 | Removing excavated material (soil) exc 50m and n exc 250m depositing where directed at a level exc 1.5m above the starting point all as specified and directed. |
| 33 | Spike rolling to surface or making impressions of expanded metal, whilst the concrete is green as directed. |
| 34 | Excavating over areas, exc 1.5 m deep and getting out soft/loose soil as per specified and directed. |
| 35 | M & L for PCC bed (1:4:8) type D-2 (40 mm stone agg) Cement concrete in in foundations, filling and mass concrete etc all as directed. |
| 36 | M & L for Reinforced Cement Concrete (Design Mix M-25) (using 20mm graded aggregate Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concretecomplete all as specified and directed. |
| 37 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed. |
| 38 | M & L for Reinforced Cement Concrete (Design Mix M-25) (using 20mm graded aggregate Columns, pillars, piers, posts and strutscomplete all as specified and directed. |
| 39 | Formwork to sides of pillars, posts, struts, piers, columns with fair finished surfaces and stanchions complete all as specified and directed. |
| 40 | M & L for Reinforced Cement Concrete (Design Mix M-25) (using 20mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m spancomplete all as specified and directed. |
| 41 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 42 | M & L for Reinforced Cement Concrete (Design Mix M-25) Type B1 (using 20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 43 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 44 | M & L for Reinforced Cement Concrete (Design Mix M-25) (using 20mm graded aggregate) Chajjas, complete all as specified and directed. |
| 45 | Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 46 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns ,footings , slabs hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 47 | All as per item No. 45.00 here-in before but 8 to 10 mm dia as in stirrups, spaces and binders. |
| 48 | M & L for 20 mm thick Damp proof course in cement motar 1:2 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 49 | M&L rendering 12 mm thick in CM(1:6) on fair faces of brick work or concrete surfaces of wall of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 50 | M & L for rendering 5mm thick on ceiling or concrete surfaces in cement mortar (1:3) surface even and smooth without using extra cement and necessary scaffolding all as spd and directed. |
| 51 | M&L for Preparation of newly plastered surfaces of Wall & applying two coats coats of OBD over a coat of primer complete all as specified. |
| 52 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces, complete all as specified and directed. |
| 53 | M&L for Preparation of new plastered surfaces of ceiling & applying two coats of white wash complete all as specified |
| 54 | M&L for non Ceramic tiles light shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exc 0.18 sqm and not exceeding 0.38 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed in cement motar 1:6 complete all as specified and directed. |
| 55 | M&L for non Ceramic tiles light shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exec 0.16 sqm and not exceeding 0.36 sqm as in vertical surfaces and screed bed / rendering and provn of rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified and directed. |
| 56 | S&F 18-20 mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete as in riser & steps, cills, wHB platforms and like jointed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed . |
| 57 | M&L for 40 mm thick cement concrete (1:2:4) type B-1 using (20 mm graded crushed stone aggregate) as in sub base of flooring,surface finished rough to receive floor topping complete all as specified and directed. |
| 58 | M & L for 75 mm thick PCC 1:3:6 type C 2 (using 40 mm graded stone aggregate) as in plinth protection complete all as specified and as directed. |
| 59 | S&F for 30 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specified and directed. |
| 60 | S&F for 105x60mmx2mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1 necessary fixing lugs, SS hinges,lock strike plate, 02 x MS bar/flat at bottom of the frameetc, including wooden texture finished paint on the frame surfacecomplete all as specified and directed. Please Enable Macros to View BoQ information |
| 61 | S&F for 105x60mmx2mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1 necessary fixing lugs, SS hinges,lock strike plate, 02 x MS bar/flat at bottom of the frameetc, including wooden texture finished paint on the frame surfacecomplete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender