Tender For special Repair To Waiting Hall, Mini Hall And Recreation Room Of Bldg Hq Chief Engineer Delhi Offrs Transit Mess Under Ge (North) Delhi Cantt-10
Tender Value
28.07 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
15 days left
EMD
56200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Waiting Hall, Mini Hall And Recreation Room Of Bldg Hq Chief Engineer Delhi Offrs Transit Mess Under Ge (North) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and all as directed. |
| 2 | Taking down chowkhats or frames with shutters exc 1.5 sqm but n.exc 4.00Sqm each(without taking off shutters from the frame) and all as directed. |
| 3 | S&F Factory made laminated decorative designed and edge lipping single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified. Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 4 | S&F Factory made Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type door/window/ ceosetory windows & other frames / chowkat of size 45 x 70mm compressing of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full boady threaded star headed SS screws having minimum density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast /Lugs/SS dash fastebers if required dia and length complete all as per direction of Engineer-in-Charge (MS holdfast /lugs or SS dash fasteners shall be paid separately) Note:- for WPC solid door/window frames. minus 5mm tolerance in dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. |
| 5 | S&F Factory made Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type door/window/ ceosetory windows & other frames / chowkat of size 60x125mm compressing of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full boady threaded star headed SS screws having minimum density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast /Lugs/SS dash fastebers if required dia and length complete all as per direction of Engineer-in-Charge (MS holdfast /lugs or SS dash fasteners shall be paid separately) Note:- for WPC solid door/window frames. minus 5mm tolerance in dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. |
| 6 | S&F 30mm thick, WPC, both side laminated and well designed glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc,all as specified and directed. |
| 7 | S&F Brass butt hinges, 100 mm size medium weight, cold rolled mild steel including necessary screwing complete all as specified and directed. |
| 8 | S&F Barss Fancy designed Handles 150mm long including necessary screwing complete all as specified and directed. |
| 9 | S&F Brass fancy type tower bolt 150mm long extruded section including necessary screwing complete all as specified and directed. |
| 10 | Supply and fixing factory made uPVC colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note:- For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note : (i) Rates shall include Glass & Wiremesh for shutters. (ii) Glass should be 6mm thick and toughned. |
| 11 | Supply and fixing factory made uPVC colour frame work for Fixed flass pane work upto 1.0m to 3.00m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension comprising of uPVC multichambered frame, extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note:- (i) Rates shall include Glass for shutters. (ii) Glass should be 6mm thick and toughned. |
| 12 | Dismantling of floor tiles, mozzac floor, hearth or wall tiling with cement mortar bedding, backing and dispose rubbish out off the premises complete all as specified and directed. |
| 13 | M&L non skid ceramic tiles colored tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed. |
| 14 | Add for Join Free non skid ceramic tiles. |
| 15 | M&L for verified ceramic coloured tiles polished 10 mm thick dark shade/double shaded area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm as in floors over 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement including in dado/skirting. all as specified and directed |
| 16 | M&L glazed ceramic coloured tiles size 1200mmx600mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in CM (1:4) complete all as specified and directed. |
| 17 | Dismantling of Stone slabs laided in any mortar complete all as specified and directed. |
| 18 | M&L for Granite (of any type) tiles 18 to 19mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including screed bed 20mm thick in cemen tmortar 1:6 completecomplete all as specified and directed. |
| 19 | M&L for Granite (of any type) tiles 18 to 19mm thick machine cut as in dado/skirting bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including screed bed 10mm thick in cemen tmortar 1:3 completecomplete all as specified and directed. |
| 20 | M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 21 | S&L 10mm Thick Toughen glass partitions, including all fittings and fixtures, necessary Handles, hinges, and knobs etc as per the existing one complete all as specified and directed. |
| 22 | S&L 12mm Thick Toughen glass partitions, Doors, including all fittings and fixtures, necessary Handles, hinges, and knobs etc as per the existing one complete all as specified and directed. |
| 23 | Dismantling of Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed. |
| 24 | Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed. |
| 25 | Cutting out cracks to V-section in existing roofs or terracing surfaces, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight), complete all as specified and as directed. |
| 26 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for inserting APP membrane, concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall. |
| 27 | M&L for 25mm thick providing cement concrete type 1:2:4 type B-0 (12.5 mm graded agg ) as in roof padding over roof slab for making slope on roof top surface finished even and smooth and rounded or chamfered on edges complete all as specified. |
| 28 | M&L for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) with WPC (WPC shall be measured and paid separately) |
| 29 | Supply only of liquid water proofing compound complete all as specified and directed. |
| 30 | M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :-(a) Applying bitumenous primer @ 0.4 Its per Sqm over plastered surfaces of roof incl parapet surface.Note:- (a) Bituminuous primer shall be \\"TANK MASTIC\\" manufactured by \\"EMUFALTE\\" manufactured by M/sTexsa India Ltd. or equivalent)(b) Over the priming coat laying one layer APP based polymembric membrane of approved manufacturer 3mm thick weight not less than 3.5 Kgs per Sqm reinforced with non woven polyester febric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing.Note:- (i) Laying APP bassed polymenic membrane shall be done torch on methed or as per manufacturer's instructions.(ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction.(iii Applying two coats of Aluminium paint over APP membrane.)(iv) Cutting groove in brick wall 75mm wide and 65mm deep and shoping horizontal face of groove with cement mortar 1:3 |
| 31 | S&F Water closet wall hung type of Jaquar ITS-WHT-6953NBIPP Rimless Bowl with cistern for Coupled WC with UF soft close slim seat cover, Hinges, Fixing Accessories and Accessories Set, Size : 375 X 520 X 400 mm, S Trap - 250 mm. JCS-WHT-2400FS- Cistern with Cistern FittingS, complete all as per manufacturer's instructions and as required at site. |
| 32 | S&F for Hand shower / Health faucet with 8mm dia 1m long flexible tube with brass CP nuts & wall hook of Jaquar Make (CAT No ALD 573) or equivalent complete all as per manufacturer's instructions and as required at site. |
| 33 | S&F for 15 mm bore 2 in 1 Bib cock Chromium plated of Jaquar Make (CAT No FLR 5041N)or equivalent with wall flange and as required at site complete all as specified and directed. |
| 34 | S&F for Towel RingSquare with Round Flange of or complete all as per manufacturer's instructions and as required at site. |
| 35 | S&F for Towel rack 600 mm long with lower hanger of complete all as per manufacturer's instructions and as required at site. |
| 36 | S&F for Soap Dispenser with Glass Bottle complete all as specified and directed. |
| 37 | S&F Toilet Paper holder of complete all as per manufacturer's instructions and as required at site |
| 38 | S&F Soap dish of Jcomplete all as per manufacturer's instructions and as required at site |
| 39 | S&F Towel Ring of complete all as per manufacturer's instructions and as required at site |
| 40 | S&L Wash Hand Basin of including removing the existing fitting, complete all as per manufacturer's instructions and as required at site. |
| 41 | S&F for Pillar Tap of tall bodt sensor faucet for wash hand basin complete all as specified and directed. |
| 42 | S&F for 15 mm Angle Stop cock with wall flange of complete all as per manufacturer's instructions and as required at site complete all as specified and directed. |
| 43 | S&F for WALL Mixer of complete all as per manufacturer's instructions and as required at site complete all as specified and directed. |
| 44 | S&F for Bib Tap of complete all as per manufacturer's instructions and as required at site complete all as specified and directed. |
| 45 | S&F for Shower Square of size 150mmx 150mm of complete all as per manufacturer's instructions and as required at site complete all as specified and directed. |
| 46 | S&F for Shower cable 1.50 M of complete all as per manufacturer's instructions and as required at site complete all as specified and directed. |
| 47 | S&F in repairs Drappery curtain rods decorative type stainless steel 25mm nominal dia of approved quality including fixing of two number decorative brackets fixed in brick/concrete wall, Two number of latto on both ends of curtain rods complete all as specified and directed. |
| 48 | S&F for Shower shower enclosures (Delta Model) of around shower enclosure with counter slidin door complete all as per manufacturer's instructions and as required at site complete all as specified and directed. |
| 49 | S&F for Double Arm Wall Mounted Reversible Plain/ Magnifying (3X) Pivotal Mirror of complete all as specified and directed. |
| 50 | S&F Desigenr Glass bevelled edge mirror of selected quality glass, mounted on 6mm thick ACP board and LED strip light and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 51 | S&F Tubes, ‘CPVC, with all fittings and fixed comp to walls and ceilings or laid in floors of 20 mm bore including taking down old one complete all as specified and directed. |
| 52 | S&F Tubes, ‘CPVC, with all fittings and fixed comp to walls and ceilings or laid in floors of 25 mm bore including taking down old one complete all as specified and directed. |
| 53 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on stone walls complete all as specified and directed. |
| 54 | S&F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 55 | S&F PVC waste pipe of bore 32 mm bore to WHB all as specified complete all as specified and directed. |
| 56 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore complete all as specified and directed. |
| 57 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore |
| 58 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed. |
| 59 | S&F PVC (SWR) bends any radius with access doors 110mm bore complete all as specified and directed. |
| 60 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed. |
| 61 | S&F PVC (SWR) bends any radius with access doors 75mm bore complete all as specified and directed. |
| 62 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 63 | S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 64 | S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 65 | S&F for 1000 ltrs capacity three layer rotational molded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted of and fixed in position including, dismantling existing water tanks etc all as specified and directed. |
| 66 | S&F for 20mm CPVC Gate valve pipe and fixed complete all as specified and directed. |
| 67 | S&F for 25mm CPVC Gate valve pipe and fixed complete all as specified and directed. |
| 68 | S&F for 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 69 | Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed. |
| 70 | M&L for brick works with fly ash bricks old size straight or curved on plain exc mean radius built in cement mortar 1:6 complete as directed. |
| 71 | M&L for Half Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed. |
| 72 | Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good disturbed surfaces all assessary complete all as specified. |
| 73 | M&L for Modular Wardrobe / cupboard with 18 mm thick one side decorative and other side balancing lamination factory pressed HDHMR Board levies of action Tesa and equivalent including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc with auto closing spring loaded hinges (hydraulic type) etc or sliding with track arrangement as directed and 8mm thick both sides Prelaminated BSB (Both side balancing proper ) HDHMR of Action Tesa and equivalent as per IS:14587:1998 fixed including dismantling of existing complete all as specified. |
| 74 | S&F Stainless steel handles 75mm fancy type fir cub boad shutter complete all as specified and directed. |
| 75 | S&F for Stainless Steel Hinges 50mm long fixing to timber frame work including necessary cutting and Stainless steel screws complete all as specified and directed. |
| 76 | S&F in magnetic catches with steel body ‘H’ type, fixed to shutter complete. |
| 77 | S&L in repair soft close heavy duty steel nickel plated telescopic drawer channel size 20 inch full extension load capacity 50 Kgs including fixing arrangement to drawer/ baskets etc completed all as specified and directed. |
| 78 | S&F 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified. |
| 79 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 80 | Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to fecilitate demolition complete all as specified and directed. |
| 81 | M&L for Reinforced Cement Concrete (Nominal mix) B0 1:2:4 (using 12.5mm graded stone aggregate) as in Chajjas slab, slabs and the like complete all as specified and directed. |
| 82 | Use waste of form work to Chajjas, Slab, Chullah hoods, troughs and similar items including edges rough finished surfaces complete all as specified and directed. |
| 83 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 84 | Taking down cement or cement lime plaster on brick or stone walls/ etc including raking out joints, hacking for key, scrubing down with water , |
| 85 | M&L for rendering 5mm thick ready mix plaster on brick or brick work or concrete in cement mortar ceiling surfaces of wall finished even and fair without using extra cement and incl highly stretchable, durable and hydrophobic, Nanotechnology based Elastomeric Hydrophobic Powder/ admixture (EHP) powder @ 1% of cement content complete all as specified and directed. Note : Elastomeric Hydrophobic Powder/admixture (EHP) shall be measured and paid as Supply only in respective item all as specified and directed by Engineer-in-Charge. |
| 86 | M&L for rendering 15mm thick ready mix plaster on brick or brick work or concrete in cement mortar external surfaces of wall finished even and fair without using extra cement nd incl highly stretchable, durable and hydrophobic, Nanotechnology based Elastomeric Hydrophobic Powder/ admixture (EHP) powder @ 1% of cement content complete all as specified and directed.Note:- Elastomeric Hydrophobic Powder/admixture (EHP) shall be measured and paid as Supply only in respective item all as specified and directed by Engineer-in-Charge. |
| 87 | M&L for preparation of old/new plastered surfaces and applying Nanotechnology based Nano Putty is white cement based product with dispersible polymer and functional additives for application on interior rough plasters to give a smooth surface and will/Ceiling form base for paint finish for interiors of the building, applied in 02 coats of total thickness 1.5mm @ 1.2 kgs/sqm complete all as specified. |
| 88 | All as per the description of srl Item No. 87 here-in-before but 02 coats with approved Nano primer complete |
| 89 | M&L for 02 coats of interior plastic emulsion water based gives walls a smooth and matt finish and applied on prepared surface of wall & ceiling over a coat of approved nano primer @ 6.50 sqm/ltr using AUTO-ROLLER and AIR-LESS PAINT SPRAYER complete all as specified and dircted by Engr-in-Charge. |
| 90 | M&L for 02 coats of Nanotechnology based Exterior Paint, wather and water proof, water based gives walls a smooth and matt finish and applied on prepared surface of wall & ceiling over a coat of approved nano primer @ 6.50 sqm/ltr using AUTO-ROLLER and AIR-LESS PAINT SPRAYER complete all as specified and dircted by Engr-in-Charge. |
| 91 | Supply only Nanotechnology based Elastomeric Hydrophobic Powder/admixture (EHP) powder for cement plaster and concrete. |
| 92 | Demolition of cement concrete of any description and in any position(unreinforced) in ground floors below or above ground level n.exc 15 cm thick and clearing rubbish from site all as directed and specified. |
| 93 | M&L for 40 mm thick Cement concrete 1:2:4 type B-1 as in floor including surfaces to be finished even and smooth with using extra cement complete all as specified and directed |
| 94 | M&L 75 mm thick Cement concrete 1:3:6 (40mm graded aggregate) in flooring or plinth protection including surfaces to be finished even and smooth without using extra cement complete all as specified and directed. |
| 95 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed |
| 96 | S&F 18mm thick plywood grade 1 (with BWR resin) fixed with screws to timber frame work with screws to timber frame work as in cupboard, kitchen cabinet etc all as specified and directed |
| 97 | S&F 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions etc all as specified and directed |
| 98 | S&F 3mm thick ACP (Aluminium composite panel) conforming to IS-736, size 350mm x 250mm, covered with high intensity grade (Class C, Type VIII, IX, XI) retro reflective sheeting of green colour as per IRC standard meeting on one side with computer cut letters on high intensity grade retro reflective sheet (White colour) marking Bldg Nos and fixed with SS screws on four corners to walls using PVC plugs complete all as specified. (Make (ACP board) : Alex, panel, Eurobond, Alstrong or equivalent) (Make (retro reflective sheet) : 3M, Darkeye or Avery) |
| 99 | M&L 7 to 10mm thick PVC panels light weight, waterproof, and durable coloured plain/designed/groved with standard panel sizes typically around 250mm x 3050mm (10ft length) feature interlocking tongue-and-groove systems, suitable for vertical or horizontal installation on walls and ceilings including GI Corners fixing complete all as specified and directed. Note : Colour & Type should be directed by Engr-in-Charge. |
| 100 | M&L for Designed/Stepped Flase Ceiling Gypsum board including applying 3mm thick wall care putty and 1 coat of primer and 2 coats of nterior emulsion paint for complete all as specified and directed. |
| 101 | M&L for Designed cornerniers of POP as in fixed in ceiling along complete all as specified and directed. |
| 102 | M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre tocentre complete all as specified and directed. |
| 103 | M&L for window roller Blinds of The Blind system consist of a coated aluminium tube of 38 mm diameter with provision of fabric clamping.The Fabric is rolled up and down through a chain drive system with built in drive gear and an over run brake system. The side brackets are universal type suitable both for wall and ceiling mounting. The bottom end of the fabric is rolled over an oval shape aluminium tube with provision to lock the fabric.complete all as specified and directed. |
| 104 | M&L for Retractable Roof Awnings (14'x8') complete all as specified and directed. |
| 105 | Taking down old unserviceable point wiring from existing conduit (light fan, socket or powder) complete such as switches, ceiling rose, pendent regulated and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc complete |
| 106 | Material & labour for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and factory made modular flush sheet galvanised metal sunken box having sheet thickness not less than 1.2 mm with zinc coating not less than 120 GSM with top, bottom, side and back wall knockouts for conduit entry from any direction, modular white cover plate with frame, blanking plate etc suitable for up to required module etc complete and making good to the disturbed surfaces to match the existing complete all as specified and directed for the following :- Make:- Polycab/Havells/KEI/Goldmedal |
| 107 | One light point controlled by one, one way switch |
| 108 | One ceiling/ exhaust fan point controlled by one, one way switch |
| 109 | One bell point controlled by one, one bell push |
| 110 | One socket outet point 5 amps on the independent board |
| 111 | One socket outet point 5 amps on the same board |
| 112 | All as per the description of srl Item No. 106 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.Make:- Polycab/Havells/KEI/Goldmedal |
| 113 | S&F modular switch, 06 Amps, single pole, one way, 230 volts, one module and IP 20 protection complete Make:- Anchor (Vision)/Havells (Apogee) /Schneider (Unika)/Goldmetal(GIFA) |
| 114 | S&F modular bell push with indicator, 06 Amps, single pole, one way, 230 volts complete Make:- Anchor (Vision)/Havells (Apogee) /Schneider (Unika)/Goldmetal(GIFA) |
| 115 | S&F modular socket outlet 03 Pin, 06 Amps, 02 module with shutter complete Make:- Anchor (Vision)/Havells (Apogee) /Schneider (Unika)/Goldmetal(GIFA) |
| 116 | S&F modular switch, with indicator, 16 Amps, single pole, one way, 230 volts complete Make:- Anchor (Vision)/Havells (Apogee) /Schneider (Unika)/Goldmetal(GIFA) |
| 117 | S&F modular socket outlet 02 in 01, 03 pin, 16 Amps, 02 module with shutter complete Make:- Anchor (Vision)/Havells (Apogee) /Schneider (Unika)/Goldmetal(GIFA) |
| 118 | S&F ceiling rose surface type bakelite 65x50mm three terminal completeMake:- Anchor (Vision)/Havells (Apogee) /Schneider (Unika)/Goldmetal(GIFA) |
| 119 | S&F bell, ding dong type, AC, 230 V, single pole Make:- Anchor (Vision)/Havells (Apogee) /Schneider (Unika)/Goldmetal(GIFA) |
| 120 | S&F (in replacement) surface mounting LED integrated aluminium housing batten luminaire with PC diffuser 10 watt 2 feet fixture should have minimum efficiency at level >=120lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@240V AC, an operating voltage range of 140-270V and all accessories pre-wired including connecting up with copper conductor wire of suitable size with connector block complete. Make:- Anchor (Vision)/Havells (Apogee) /Schneider (Unika)/Goldmetal(GIFA) |
| 121 | S&F (in replacement) decorative wall mounting light SS finish fixture with extruded glass difuser suitable for up to 40 watt mini glass lamp, lamp holder, including 9 Watts LED bulb having minimum efficiacy at level >=100 lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@ operating voltage 170V-240V for fixing in decorative wall mounting light and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete Make:- Philips/Havells/Wipro |
| 122 | S&F (in replacement) surface mounting LED integrated aluminium housing batten luminaire with PC diffuser 20 W, 4 feet fixture should have minimum efficiency at level >=120lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@240V AC, an operating voltage range of 140-270V and all accessories pre-wired including connecting up with copper conductor wire of suitable size with connector block complete. Make:- Philips/Havells/Wipro |
| 123 | S&F(in replacement) LED strip light/profile lighting with power consumption-12 W/m, Input voltage- 24 V DC, IP 68 waterproof rating, LED density- 280 LEDs /m, 3000k warm white, etc as required for connections complete all as specified and directed.Make:- Philips/Havells/Wipro |
| 124 | S&F (in replacement) Wall-mounted mirrors with built-in lights (LED mirrors), light source : typically energy-efficient LED strips is embedded directly into the mirror (backlit) & shadow-free lighting complete all as specified and as directed by Engr-In-Charge. Make:- Philips/Havells/Wipro |
| 125 | Supply and fixing in replacement of ultra bright compact 6/8 Watt round LED downlighter recess/surface with high efficiency LED,s idealy suited for low ceiling areas to give glare light IP-54 in 6500K with integraed driver to delivered superior light output and uniformity utilising the latest LED technology, ceiling cutout 95 mm mm dia hight max 83 mm recess luuminaries all as specified and directed.Make:- Philips/Havells/Wipro |
| 126 | S&F(in replacement) Wall-mounted bedside lights, or wall sconces with Specification as Wattage : Usually ranges from 3W to 6W for LED lights, providing focused task brightness.,Color Temperature: Often around 3000K (warm white), providing cozy and relaxing illumination. Energy Efficiency: Integrated LED bulbs ensure long-lasting, eco-friendly performance with minimal heat emission and and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete all as specified and as directed by Engr-In-Charge. Make:- Philips/Havells/Wipro |
| 127 | S&F(in replacement) sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 12 way, with 100 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing surface completeMake:- Legrand/ABB/Schneider |
| 128 | S&F (in replacement) MCB SP, AC, 240 volts of 06 to 40 Amps capacity \\"B\\" curve, 10 KA incl connections using copper lugs completeMake:- Legrand/ABB/Schneider |
| 129 | S&F (in replacement) MCB, SPN, AC, 230 volts of 63 Amps capacity \\"C\\" curve, 10 KA breaking capacity and making connections by using copper lugs complete Make:- Legrand/ABB/Schneider |
| 130 | S&F (in replacement) modular 20A SPN enclosure with 2 pole and Earth Metal Plug & Socket Board, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete Make:- Legrand/ABB/Schneider |
| 131 | Material and labour for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed, including taking down old sub main wiring. Note : Two run for neutral and phase and one run for continuous earth wire shall be measured as one run for payment purpose)Make:- Polycab/Havells/KEI |
| 132 | M&L (in replacement) submain wiring with 2 run of 6 Sqmm (nominal area) FRLS PVC insulated, unsheathed and stranded copper conductor cable ISI marked drawn in to PVC conduit with and including independent 6 Sqmm (nominal area) FRLS PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB complete.Note : Two run for neutral and phase and one run for continuous earth wire shall be measured as one run for payment purpose)Make:- Polycab/Havells/KEI |
| 133 | M&L (in replacement) for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to GI strip 25 x 4 mm by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 40 mm bore light grade for protection of earthing wire PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade, funnel with wire mesh, 50 mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8 mm MS bars at 150 mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point/equipment and testing complete |
| 134 | Supply, Installation, Testing and Commissioning (in replacement) of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 220 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin,nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing and with & including all fixing arrangments etc. complete as required including connecting up with three core flat flexible copper conductor cable of suitable size with connector block to ceiling rose, complete all as specified and directedMake:- Havells Model No Efficiencia Neo (BLDC 26W) / Orient Model AEON / Crompton Energion HS |
| 135 | Supply and fixing wall mounted fan of 400 mm sweep, 230 volts, AC, 50 Hz capacity, including all arrangements for mounting of fan including connecting up with provision of PVC insulated flexible twisted type copper conductor cable 1.5 Sqmm, 2 core as required for connections complete all as specified and as directed. Make:- Orient/Havells/Atomberg |
| 136 | Supply and fix (in replacement)exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm, cutting of hole in wall, making of wooden frame, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directedMake:- Orient/Havells/Atomberg |
| 137 | Supply and fixing (in replacement)electric water heater, storage type 25 ltrs capacity, BEE star rated, vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adapter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode having adustable knobe for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure having heating element 2 KW and minium two year warranty on product, minimum three years on heating element, complete all as specified and as directed .Make:- Bajaj Eternal Series - Pentacle dici/ AO Smith SDS Green – 025/ Havells Adonia plus |
| 138 | Supply and fixing (in replacement) LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 40 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts & washers complete Make:- Phillps/Havells/Wipro Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender