Tender For Provision Of Revenue Major And Mior Works At Certain Locations At Afa
Tender Value
40.75 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
11 days left
EMD
81502
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Revenue Major And Mior Works At Certain Locations At Afa
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) of any description and in ground floors and pavings n exc 15 cm thickness (below or above ground level) any position and disposed off to a distance exc. 50 mtrs and not exc. 250 mtrs all as directed by Engr-in-Charge. |
| 2 | Dismantling floor, heath or wall tiling including cement sand mortar bedding and removing rubbish of the premises complete all as specified and directed. |
| 3 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm or removing the earth in hard/dence soil all as specified and directed. |
| 4 | M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard/Dense Soil complete all as specified and directed. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 6 | Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 7 | M& L for Plain Cement concrete 75 mm thick Type B1 1:2:4 (20 mm graded Aggregate) as in plinth protection all as specified and directed. |
| 8 | M& L for Plain Cement concrete Type D2 1:4:8 (40 mm graded Aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 9 | M&L for Plain cement concrete 1:3:6, Type C2 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc., complete all as specified and directed. |
| 10 | M&L for 25mm thick PCC type B-0. 1:2:4 (12.5mm graded aggregate) as sub base of floor etc, complete as specified and as directed. |
| 11 | M&L 25 mm thick plain Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor finish concrete complete all as specified and as directed. |
| 12 | M& L for 75 mm thick Plain Cement concrete Type D2 1:4:8 (40 mm graded Aggregate) as in sub base flooring complete all as specified and as directed. |
| 13 | M&L for Precast reinforced cement concrete 1:2:4 mix, type B-1 using 20 mm graded stone aggregate as in slabs supported on walls, as in platforms, shelves etc all as specified and directed. |
| 14 | M & L for precast cement concrete solid building blocks or slabs 10cm thick with plain or interlocking joints with PCC type C1 1:3:6 using 20mm graded stone aggregate setting in mortar 1:4 in walls, complete all as specified and directed. |
| 15 | M& L for Pre-cast cement concrete block masonry with type C1 (1:3:6) using 20 mm graded stone aggregate solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed. |
| 16 | M & L for Rendering 10 mm thick on fair faces of brick work or concrete wall surfaces in CM 1:6 surface finished even & smooth without using extra cement complete all as specified. |
| 17 | M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement with using WPC complete all as specified. (WPC shall be measured and paid separately). |
| 18 | Supply only integral water proofing liquid complete all as specified and as directed. |
| 19 | M&L for applying two coats of Oil bound distemper on walls including reparation of new plastered surfaces over a coat of primer complete all as specified and as directed. |
| 20 | Preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and as directed. |
| 21 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed. |
| 22 | M & L for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in Apoxy Grout 2 to 3 mm spacer and filled with white cement mixed with matching pigment over and including 20 mm thick screed bed in CM 1:6 all as specified. |
| 23 | M & L for Joint free non - skid coloured ceramic tiles, 10 mm thick (square or rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as in floors etc. set and jointed 3 to 4mm specers and filling with epoxy complete all as specified and directed by Engineer-in-charge . |
| 24 | M&L for Screed bed or bedding layer of cement mortar (1:4) 15mm thick for laying floor tiles/floor finishes. |
| 25 | Material and labour for Glazed ceramic coloured tiles in vertical surfaces 600X300X 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and as directed. |
| 26 | M&L Joint free Glazed coloured ceramic tiles of digital quality in vertical surface size of each tile exceeding 0.54 sqm but not exceeding 1.00 Sqm, set and jointed in 3 to 4mm spacers filling with epoxy and corners in pvc lining complete all as specified and directed by Engineer-in-charge . |
| 27 | M&L for rendering 10mm thick in cement mortar 1: 3 on brick or concrete surfaces to receive as backing of wall tiling etc complete all as specified and as directed. |
| 28 | M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade incl screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM (1:4) etc complete all as specified. |
| 29 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 30 | M&L for MS TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed. |
| 31 | S&F of Structural Steel work as columns, posts, stanchions etc using ERW or induction butt welded tubes conforming to IS-1161-1998 grade St.-240 or with holow structural steel sections conforming to IS 4923-1997 Grade St-240 all as specified and directed. |
| 32 | S&F of Structural Steel work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters , vertical posts, etc fixed with angle cleats or other connecting plates, cleats etc. using ERW or induction butt welded tubes conforming to IS-1161-1998 grade St.-240 or with holow structural steel sections conforming to IS 4923-1997 Grade St-240 all as specified and directed. |
| 33 | S&F Pre painted galvalume aluminium zinc coating GI based corrugated sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and as directed. |
| 34 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc crome primer on Surfaces of any description,over 10cm in width or girth, not otherwise described complete all as specified and as directed. |
| 35 | S&F expanded metal (n exc 4 Kg) bent to shape required and tying, welded with MS frame work/ Independent section complete all as specified |
| 36 | Cutting holes into or through brick walls not exc 150 sqcm built in cement mortar and stone walls and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required |
| 37 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 38 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 39 | S&F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.suppling & fixing in opening as per specification & drawing all as specified and directed. |
| 40 | S&F of Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) complete all as specified and directed. |
| 41 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings all as specified and directed. |
| 42 | S&F Powder coated (Thickness not less than 50micron) Aluminium anodised Grill, aperture n exc 75 mm ,size 6mm x 4mm thick, including 1 mm thick channel fixed with steel screws complete all as specified and directed. |
| 43 | S&F 250 mm long Brass, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed all as specified. |
| 44 | M & L for Brass handles, cast type, polished bright 150 mm long all as specified and directed |
| 45 | S & F of 125 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified. |
| 46 | S&F Brass Locks cupboard grade I, size 50 mm brass 4 levers |
| 47 | S&F for Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 200 mm of extruded section and fixed. |
| 48 | S&F 150 mm size Brass handles, cast type,polished bright all as specified. |
| 49 | S&F of Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 of 100 mm long. |
| 50 | S&F of 100mm stainless steel butt hinges, cold rolled medium weight complete all as specified. |
| 51 | S&F of 100mm Aluminum anodised barrel tower bolts of extruded section complete all as specified. |
| 52 | S & F frosted glass of 5.50mm thick selected quality in square and not exceding 0.5 Sqm in each pane. |
| 53 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified. |
| 54 | S&F powder coated aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 55 | S&F powder coating anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, 3 Nos hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 56 | S & F powder coated aluminium window and ventilator shutters of Sliding type with standard aluminium sections 40 x 18mm size weight not less than 0.55Kg/Rm including rollers and necessary locking arrangement etc complete all as specified and directed. |
| 57 | S&F 4mm thick Figured glass, pin head type and glazing fixed in aluminium frames with rubber beading/gasket in squares n exc 0.5 sq. m in each pane complete all as specified. |
| 58 | S&F of 100mm extruded aluminium anodised alloy handles fabricated type complete all as specified. |
| 59 | S&F 250 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified. |
| 60 | S&F in repair Rotational moulded PVC water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including tank nipple and lid complete all as specified and as directed. |
| 61 | S & F of of Rotational moulded PVC water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 1000 ltrs complete all as specified and directed |
| 62 | Taking up or down 15mm bore of pipe PVC/steel tubing and connections, including for refixing or removal and disconnection of fiittings etc complete all as specified and directed. |
| 63 | Taking up or down 20mm bore of pipe PVC/steel tubing and connections, including for refixing or removal and disconnection of fittings etc complete all as specified and directed. |
| 64 | Taking up or down GI/PPR tubing of 25mm bore and connectons etc complete all as specified and as directed. |
| 65 | S&F of 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 66 | S&F of 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 67 | S & F GI tubes of 25mm dia medium grade with all fittings and fixed complete to walls & ceiling or laid in floors etc complete all as specified and as directed. |
| 68 | S&F in repairs of High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6kg/cm2 fixed complete to walls or laid in floors complete all as specified and directed. |
| 69 | S&F PVC (SWR) bends any radius suitable for 75mm bore pipe, etc complete all as specified and as directed |
| 70 | S&F 75mm dia PVC (SWR) floor/nahani trap plain with grating including jointing with solvent cement and jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as specified and as directed. |
| 71 | S & F in repair PVC (SWR) pipes of 75 mm dia single socketed in any length with rubber ring joints fixed to walls / floor complete all as specified and as directed |
| 72 | S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed |
| 73 | S&F PVC (SWR) bends any radius suitable for 110mm bore pipecomplete all as specified and directed |
| 74 | S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia bore of pipe. |
| 75 | S&F in repairs of Ball valve 20mm dia high pressure PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum wt. 210gms) etc complete all as specified and directed. |
| 76 | S&F Waste coupling of 32 mm PTMT for glazed ware basins/urinals with long screwed shanks and fly-nuts etc complete all as specified and directed. |
| 77 | S&F in CP Bib taps 15 mm cast copper alloy fancy type with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule etc complete all as specified. |
| 78 | Supplying and laying of 32 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/trenches including cutting holes in walls and making good with CM (1:3) where required and taking down old tubing of any description complete all as specified and as directed. |
| 79 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/trenches including cutting holes in walls and making good with CM (1:3) where required and taking down old tubing of any description complete all as specified and as directed. |
| 80 | S&F 20mm Gun-metal in repair , globe or gate valves, with iron wheel head, screwed both ends suitable for CPVC pipe incuding connecting socket all as specified and directed. |
| 81 | S&F Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm |
| 82 | S&F in repairs Urinals with suitable integrated EFS (electronis Flushing system) of make : Cera (CALCIA EFS) of snow white colour size (360 x 330 x 740 mm) Cat. No. S4010101 along with its necessary connected accesories etc all complete and as directed. |
| 83 | S&F in repairs Curved Urinal partitions 10 mm thick of size 900 x 450 mm of meke Cera Cat. No. S4090105 along with its necessary connected accesories etc all complete and as directed by Engineer-in-Charge. |
| 84 | S&F in repairs wall Hung EWC of make : Cera (capitol) of snow white colour size (530x360x375 mm) Cat. No. S1044150 P Trap or equivalent with duroplast slim soft close seat cover etc all complete and as directed by Engineer-in-Charge. |
| 85 | S&F in repairs concealed cistern set with full frame including all accessories of Make : Cera (Chevron) Cat. No. B1110111 or equivalent (without Knob) etc all complete and as specified. |
| 86 | S&F in repairs Q type shine finish Knob for concealed chevron cistern set including all accessories of Make : Cera (Chevron) Cat. No. B11210104 or equivalent etc all complete and as specified. |
| 87 | S&F in repairs Health faucet ABS body with 1 meter SS braided connection pipe of make : Cera Cat. No. F8030109AB or equivalent all complete and as specified. |
| 88 | S&F in repairs Toilet paper holder with flap guard of make : Cera (Hera range) Cat. No. F5007110 or equivalent all complete and as directed. |
| 89 | S&F in repairs Grating doom of 100 mm dia of Stainless steel hinged or openable type ,fixed with suitable solvent cement complete as specified. |
| 90 | S&F in repairs 2-Way bib cock with side handle, wall flange and aerator of make: Cera (winslet) Cat. No. F1099161 or equivalent complete all as specified and directed. |
| 91 | S&F in repairs table top Wash Hand Basin of size 750 x 380 x 130 mm of snow white colour of make : Cera (Catmega) Cat. No. S2020160 or equivalent complete all as specified and directed. |
| 92 | S&F in repairs 32 mm waste coupling with ceramic pop-up push type (full threaded) of make: Cera Cat. No. F8050351 or equivalent all complete and as specified. |
| 93 | S&F in repairs polyamide braided connection pipe 12 mm dia, 450 mm length (02 piece set) of make: Cera Cat. No. F8070402 or equivalent all complete and as specified. |
| 94 | S&F in repairs bottle trap of size 300 mm of make : Cera Cat. No. F8060406 or equivalent complete all as specified and directed. |
| 95 | S&F in repairs single lever Wash hand Basin mixer with 450 mm braided connection pipe (without pop up) of Make : Cera (winslet) Cat. No. F1099451 or equivalent all complete and as specified. |
| 96 | S&F in repairs angle cock with wall flange of Make : Cera (winslet) Cat. No. F1099201 or equivalent all complete and as specified. |
| 97 | S&F in repairs soap dish of make : Cera ( Hera range) Cat. No. F5007106 or equivalent all complete and as specified. |
| 98 | S&F in repairs Liquid soap dispenser of make : Cera (Hera range) Cat. No. F5007111 or equivalent complete all as specified. |
| 99 | S&F in repairs Towel ring of make : Cera (Hera range) Cat. No. F5007105 or equivalent complete all as specified. |
| 100 | S&F in repairs Towel rail 600 mm long of make : Cera (Hera range) Cat. No. F5007103 or equivalent complete all as specified. |
| 101 | M&L for corner glass shelf size 225mm x225m of Make : Cera (Oceana range) Cat. No. F5005102 or equivalent complete all as specified and directed. |
| 102 | S&F in repairs 5 mm thick glass mirror of size 800 x 600 mm with double coat for protection and longevity, 5 mm clear glass shelf with stainless steel rail and silver plating on the back for better reflection of Make : Cera Cat. No. B3510149 or equivalent complete all as specified and as directed. |
| 103 | S&F PVC (SWR) pipes 110 mm bore single socketted in any length with rubber ring joints laid in trenches or floors etc complete all as specified and as directed |
| 104 | S&F PVC (SWR) pipes 75 mm bore single socketted in any length with rubber ring joints laid in trenches or floors or in walls, etc complete all as specified and as directed |
| 105 | S&F PVC (SWR) bends with oval access doors any radius suitable for 110mm bore pipe, etc complete all as specified and as directed |
| 106 | S&F PVC (SWR) branch piece, 110mm,single (single Y or T) equal or unequal etc complete all as specified and as directed. |
| 107 | S&F PVC (SWR) branch piece , 110mm, Double (double Y) equal or unequal etc complete all as specified and as directed. |
| 108 | S&F PVC (SWR) bends with oval access doors any radius suitable for 75mm bore pipe, etc complete all as specified and as directed |
| 109 | Supply and fix Salt glazed stoneware gully trap, type Q 125x100mmmm, complete all as specified and as directed. |
| 110 | Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame n.exc 1.5 sq. m complete all as specified and as directed |
| 111 | Providing and fixing of eco-friendly light weight calcium silicate false ceiling system in module size of 600x600mm with Galvanized iron powder coated 24mm T grid system. Eco friendly light weight calcium silicate tiles shall be made of non-cementitious hydrated wet molded calcium silicate slurry, reinforced with fibers and natural fillers. Free from formaldehyde and other harmful materials. Does not contain any toxic ingredients. Tiles shall be GRIHA accredited product suitable for green building applications. |
| 112 | False ceiling tiles shall have following properties: (a). Surface: All tiles are prime coated on both sides. Standard factory finish in two coats white dispersion type, solvent free paint. (b). Dimensions: 595x595x15mm thick integral densified tegular/butt edged. Size referred to are always module sizes. (c). Thickness: 15mm thick integral densified tegular/butt edges with 26mm wide collar at all around the edge resting portion and 10mm thick at quadrant of the body size of 543x543mm.(d). Density of material: 350 kg/m3 at the quadrant 10mm thick portion and 450 kg/m3 at all around the integral densified edges. (Average density 370 kg/m3 as per ECBC code 2017).(e). Relative Humidity: 100% RH as per ASTM C 473-03.(f). Fire resistance: Non-combustible as per BS 476 part 4, Fire performance as per BS 476 Part 6 for fire propagation & class 1 as per BS 476 part 7 for surface spread of flame.(g). Thermal conductivity: 0.048 W/m°K to 0.052 W/m°K as per IS 3346/1980 and as per ECBC code 2017.(h). Recycled content: shall have 46-50% recycled content.(i). Acoustic control: Sound Attenuation 30-32dB. Noise reduction coefficient (NRC) as per IS 8225:1987 for semi perforated tile: 0.5 for fully perforated tile: 0.75.(j). Light reflectance: >85%. (k). Weight: 5-5.5kg/m2. False ceiling tiles shall be laid in true horizontal level suspended on inter locking metal T grid of hot dipped galvanized iron sections of 0.33mm sheet thickness galvanized @ 120 grams per sqm including all sides comprising of main T runners of size 24x38mm of length 3000mm, cross T of size 24x32mm of length 1200mm and secondary intermediate cross T of size 24x32mm of length 600mm to form grid module of size 600x600mm. This grid shall be suspended from ceiling using galvanized mild steel members (Galvanized @ 80 gms/m2 including all sides) i.e. 12x50mm long dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L-shaped level adjuster of size 76 x 25 x 25x 1.6mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger dash fastener if require. Frame also consist of GI perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm Centre to Centre and 40mm long dry wall SS screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge. |
| 113 | S&F in repair POP (Plaster of Paris) false ceiling cast in situ type with minimum 6mm thick POP (Plaster of Paris) layer pasted over ss wiremesh and GI frame work with channels, wall angles, intermediate channels, ceiling angles, with zinc coating of min. 120g/m². fixing should not be less than 1200mm c/c interval and fixing of ceiling with fastners and support 2mm thick GI wire. Including preparation of new surface with sand paper, one coat of primer and two coats of plastic emulsion paint on prepared surface complete all as specified and directed.Note:-(i) Design of Fasle ceiling shall be directed by GE.(ii) Measurement shall be done by considering length and width of the room.(iii) The rates shal be deemed to be inclusive of All. |
| 114 | Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody & depositing to MES Storeyard incl making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge. |
| 115 | Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. incl necessary painting / distempering, white-washing etc. incl making good the disturbed surfaces & matching to the existing surfaces complete all as specified and as directed & to the entire satisfaction of Engr-In-Charge & to the entire satisfaction of the Engr-in-Charge. |
| 116 | Taking down existing serviceable hanging decorative light fittings of any type / rating from existing position / location & keeping in safe custody & re-fixing incl making necessary electric connections & testing complete all as specified and as directed & to the entire satisfaction of Engr-In-Charge & to the entire satisfaction of the Engr-In-Charge. |
| 117 | Dismantling / Disconnectig of old existing un serviceable DBs any type/ way 240/415 Volts with their old/ un serviceable burnt MCCB/ MCBs etc complete all as per specified and directed y Engr-in-Charge. |
| 118 | NOTE for Item Nos 113 to 116 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates. |
| 119 | M & L for Surface point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade), ISI marked with all fittings and accessories, PVC Clamps etc. ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLSH, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes, Modular White Cover Plates with frames of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Make of cable : Havells/Polycab/Finolex/KEI, Make of Conduit : Precision/Finolex/Polycab/Modi |
| 120 | (a) One Light/W/Fan etc. point controlled by one switch 5/6 Amps. |
| 121 | (b) One C/fan point controlled by one switch 5/6 Amps. |
| 122 | (c) One switch socket outlet point 5/6 Amps on independent board. |
| 123 | Description all as per Item No-117 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete. Please Enable Macros to View BoQ information |
| 124 | Description all as per Item No-117 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender