Tender For Repair/Maintenance Of Rising Mains Including Sluice Valve, Nrv, Foot Valve, Cleaning Of Oh Tank, Ug Sumps, Filteration Plant, Repairs To Pump/Motors At Alhilal Mil Stn Under Ge Pal Ur.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Oct 2026
5 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Of Rising Mains Including Sluice Valve, Nrv, Foot Valve, Cleaning Of Oh Tank, Ug Sumps, Filteration Plant, Repairs To Pump/Motors At Alhilal Mil Stn Under Ge Pal Ur.
BOQ
| Sl. No. | Item Description |
| 1 | M & L for Cleaning of sedimentation tank 360000 gallon (split into two equal parts of 180000 gallon) by taking out the mud,sill,sand and other particle and removing the waste material to a distance not less than 50m and spreading and levelling complete as directed including washing and scrubing down of algae,scales,vegetation and shrubs from the inside of tank with wire brush,washing with lime mixed water and applying two coats of white wash inside of tank after preparation of surface,external surface of tank shall be painted with two coats of cement base paint including preparation of old surfaces,provided block of size 90x60cm on external surface of wall with black synthetic enamel paint including write capacity of tank, date of cleaning of tank with white paint complete all as specified and directed. |
| 2 | All as per item No-1 above but, of cap 52000 gallons capacity Semi UG Sump Shed type (Supply Tank). complete all as specified and directed. |
| 3 | All as per item No-1 above but for RCC under ground sump of capacity 1 Lakh Gallon (Supply tank) complete all as specified and directed. |
| 4 | M&L for Cleaning of RCC over head water tank of capacity 100000 Gallons at 21 metre height by removing sludge, mud or any other foreign material from the bottom and internal wall surface of tank by means of wire brush and spraying of cleaned fresh water, balling out accumulated dirty water inside the tank with pump sets, removal of deposited muds and other sediments, washing of internal surface with sufficient quantity of mixture in suitable proportion (0.10 Kg of bleaching powder will be mix in 1.0 litre water), finally applying two coats of lime washing on entire internal surface of walls, allowing applied coat to become dry and wait for confirmation from MES Staff, writing the date of cleaning and capacity of tank with white synthetic enamel paint on black background with synthetic enamel paint complete all as specified and directed. |
| 5 | Note for item No 1 to 4 :- (i) Dewatering process shall be continuous as per workig hrs provn of standby arrangment of another pumping set on failure of working pump set shall be arrenged by contractor. (ii) Adequate skill man power shall be employed for cleaning. (iii) All protective arrangment / intrument during cleaning and dewatering shall be provided by contractor deemed to be included in cost of cleaning. (iv) work shall be executed by experienced person in trade and all safety precautions as per CP norms will be ensured during cleaning of open well / UG sump / overhead tank by contractor. (v) An intimation will be given to Engr in charge before execution and after completion of work. |
| 6 | Deployment of man power for collecting the sample of water from different point such as under ground sump, Open well, Bore well for chemical and bacteriological testing of water from authorised govt lab for iron content in water, PH value, Hardness, turbidity, chloride, fluoride and other parameters as per IS standrads complete all as specified and directed. |
| 7 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in deep for foundation, taking up/down or laying of GI tubing/CI pipe etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified & directed. |
| 8 | Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified & directed. |
| 9 | Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed. |
| 10 | Cutting the existing hard standing/metal road to facilitate for laying of GI pipe line/LT cables and making good the disturbed portion to bring it to original condition with PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate complete all as specified & directed. |
| 11 | Taking up or down old GI tubing 80 mm bore and connections (including fittings) from trenches/walls /floors and connections including cleaning for re-fixing or remove to store yard/ credited to contractor complete all as specified and directed. |
| 12 | Taking up or down old GI tubing 100 mm bore and connections (including fittings) from trenches/walls /floors and connections including cleaning for re-fixing or remove to store yard/ credited to contractor complete all as specified and directed. |
| 13 | Taking up or down 150 mm bore CI/DI pipes( including all fittings),with spigot and socket ends or flanged ends and lead joints including burning out joints,rubber joints from trenches/walls /floors including cleaning for re-fixing or remove to store yard/ credited to contractor complete all as specified and directed. |
| 14 | Taking up or down 200 mm bore CI/DI pipes( including all fittings),with spigot and socket ends or flanged ends and lead joints including burning out joints,rubber joints from trenches/walls /floors including cleaning for re-fixing or remove to store yard/ credited to contractor complete all as specified and directed. |
| 15 | Supplying, laying, jointing and testing 80 mm bore galvanised steel water tubing medium grade (ISI marked) laid in trenches with medium grade galvanised iron fitting (ISI marked) such as bends, tees, sockets, nipples & unions, flanges etc complete all as specified and directed. |
| 16 | Supplying, laying, jointing and testing 100 mm bore galvanised steel water tubing medium grade (ISI marked) laid in trenches with medium grade galvanised iron fitting (ISI marked) such as bends, tees, sockets, nipples & unions, flanges etc complete all as specified and directed. |
| 17 | Supply, laying, jointing and testing of DI pipe 150 mm bore with spigot and socket ends, centrifugaly cast class-K-9 suitable for tyton joints, in any length, laid in trenches/pillars complete all as specified and directed. |
| 18 | Supply, laying, jointing and testing of DI pipe 200 mm bore with spigot and socket ends, centrifugaly cast class-K-9 suitable for tyton joints, in any length, laid in trenches/pillars complete all as specified and directed. |
| 19 | Material and labour for CI Fittings such as bends (any type radius and angle ) tapers any type , bends , tee pieces single branch Y junction double branch cross (all type socket as spigot and socket etc) ,collar , cap and plugs suitablr for spigot and socket pipes upto 150 mm bore including rbber gasket complete all as specified and directed. |
| 20 | Supply, installation, connecting and testing sluice valve 80 mm bore cast iron body class-PN-1.6 with flanged ends drilled pipes, ISI marked (IS:14846:2000), having brass spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket, etc including taking down old un-serviceable sluice valve complete all as specified & directed. |
| 21 | Supply, installation, connecting and testing sluice valve 100 mm bore cast iron body class-PN-1.6 with flanged ends drilled pipes, ISI marked (IS:14846:2000), having brass spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket, etc including taking down old un-serviceable sluice valve complete all as specified & directed. |
| 22 | Supply, installation, connecting and testing sluice valve 150 mm bore cast iron body class-PN-1.6 with flanged ends drilled pipes, ISI marked (IS:14846:2000), having brass spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket, etc including taking down old un-serviceable sluice valve complete all as specified & directed. |
| 23 | Supply, installation, connecting and testing sluice valve 200 mm bore cast iron body class-PN-1.6 with flanged ends drilled pipes, ISI marked (IS:14846:2000), having brass spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket, etc including taking down old un-serviceable sluice valve complete all as specified & directed. |
| 24 | S&F in replacement of mechanical joint suitable for 100 mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed. |
| 25 | S&F in replacement of mechanical joint suitable for 150 mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed. |
| 26 | S&F in replacement of mechanical joint suitable for 200 mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed. |
| 27 | Cutting of existing 200mm bore cast iron pipe in position to required length for repairs of blockage or insert new CI fitting such as collers, branches,tee etc or pipe complete all as specified and directed. Note:- Excavation and earth work,fittings,pipe etc shall be measured and paid saperately. |
| 28 | Cutting of existing 150mm bore cast iron pipe in position to required length for repairs of blockage or insert new CI fitting such as collers, branches,tee etc or pipe complete all as specified and directed. Note:- Excavation and earth work,fittings,pipe etc shall be measured and paid saperately. |
| 29 | M&L run lead joint for cast iron spigot and socket pipe (water main) and fittings for 100 mm bore including taking out old lead from joints complete all as specified & directed. Note:-Excavation and earth work shall be measured and paid separately |
| 30 | M&L run lead joint for cast iron spigot and socket pipe (water main) and fittings for 150 mm bore including taking out old lead from joints complete all as specified & directed. Note:-Excavation and earth work shall be measured and paid separately |
| 31 | M&L rubber gasket joints (tyton joints) for CI/DI pipes of 100mm bore spigot and socket pipes including taking cut old unserviceable tyton joint complete all as specified & directed. Note:-Excavation and earth work shall be measured and paid separately |
| 32 | M&L rubber gasket joints (tyton joints) for CI/DI pipes of 150mm bore spigot and socket pipes including taking cut old unserviceable tyton joint complete all as specified & directed. Note:-Excavation and earth work shall be measured and paid separately |
| 33 | Repairing centrifugal pump set by replacing of the relevant spares taken and including packing, refixing and testing of motor of capacity 30 HP complete etc., all as specified and as directed Note: Spare parts/ accessories like shaft, bush, bearings, gland etc., shall be measured and paid separately under relevant items of this schedule. |
| 34 | Supply only the Gland coller complete with nut & bolts suitable for 30 HP capacity centrifugal pump set complete all as specified & directed. |
| 35 | Supply only the impeller bronze suitable for 30 HP capacity centrifugal pump set complete all as specified & directed. |
| 36 | Supply only the pump shaft suitable for 30 HP capacity centrifugal pump set complete all as specified & directed. |
| 37 | Supply only the shaft sleeve suitable for 30 HP capacity centrifugal pump set complete all as specified & directed. |
| 38 | Supply only the bearing suitable for 30 HP capacity centrifugal pump set complete all as specified & directed. |
| 39 | Repairing 12.5 HP Air blower induction motor by replacing of the relevant spares taken and including packing, refixing and testing of motor of capacity 12.5 HP complete etc., all as specified and as directed (Make:- Kirloskar ).Note: Spare parts/ accessories like shaft, bush, bearings, gland etc., shall be measured and paid separately under relevant items of this schedule. |
| 40 | Supply only the Gland coller complete with nut & bolts suitable for 12.5 HP capacity Air blower induction motor set complete all as specified & directed. |
| 41 | Supply only the impeller bronze suitable for 12.5 HP capacity Air blower induction motor set complete all as specified & directed. |
| 42 | Supply only the pump shaft suitable for 12.5 HP capacity Air blower induction motor set complete all as specified & directed. |
| 43 | Supply only the shaft sleeve suitable for 12.5 HP capacity Air blower induction motor set |
| 44 | Supply only the bearing suitable for 12.5 HP capacity Air blower induction motor set |
| 45 | Repairing monoblock pump set by replacing of the relevant spares taken and including packing, refixing and testing of motor of capacity 5.0 HP complete all as specified & directed..(Make:- Kirloskar ) Note: Spare parts/ accessories like shaft, bush, bearings, gland etc., shall be measured and paid separately under relevant items of this schedule. |
| 46 | Supply only the Impeller bronze suitable for 5.0 HP capacity centrifugal split type/monoblock pump set complete all as specified & directed. |
| 47 | Supply only the Pump shaft suitable for 7.5/5.0 HP capacity centrifugal split type/monoblock pump set complete all as specified & directed. |
| 48 | Supply only the Shaft sleeve suitable for 7.5/5.0 HP capacity centrifugal split type/monoblock pump set complete all as specified & directed. |
| 49 | Supply only the bearing suitable for 7.5/5.0 HP capacity centrifugal split type/monoblock pump set complete all as specified & directed. |
| 50 | M&L for stripping out squirrel cage, induction motor, 3 phase 415 volts AC 50 centrifugal starter and rotor cleaning up internally and externally including removing old burnt copper wire, worn out bearing and rewiring/ rewinding with new copper wire, including necessary transportation workshop and bring back to the installation and assembling, testing and commissioning of motor of 30HP capacity complete all as specified and directed. |
| 51 | As per item No 49 above but for 12.5 HP complete all as specified & directed. |
| 52 | As per item No 49 above but for 7.5/5.0 HP complete all as specified & directed. |
| 53 | Cleaning away all grass ,vegetation, saplings ,shrubs ,brushwood, under growth, roots, and trees not exceeding 30 cm girth(measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance complete all as specified and directed. |
| 54 | S & F in replacement Lubricant oil of best quality suitble for Air blower as per site including taking out old un-serviceable oil complete all as specified and directed |
| 55 | Supply and fix MS Cover of 3.0 mm thick sheet with angle iron frame (50x50x6mm) with Hook, Hold fast, Hinge etc. and painting it with two coat of black paint over a coat of red oxide zinc primer suitable for valve pit size 90 cm x 90 cm x 90 cm including taking out old un serviceable MS Cover of any type and size obtained at site complete all as specified and directed |
| 56 | Supply and fix MS Cover of 3.0 mm thick sheet with angle iron frame (50x50x6mm) with Hook, Hold fast, Hinge etc. and painting it with two coat of black paint over a coat of red oxide zinc primer suitable for valve pit size 120 cm x 120 cm x 120 cm including taking out old un serviceable MS Cover of any type and size obtained at site complete all as specified and directed |
| 57 | Supply and mixing Ortho Tolidin solution 500ml for testing of dissolved chlorine in water complete all as specified and directed. |
| 58 | Supply and mixing Chlorination testing glass test Tube kit for range 0.1 ppm to 2.0 ppm complete all as specified and directed. |
| 59 | M&L for cleaning, scrapping out of surface and painting of all pipe lines with two coat of primer as approved colour with two coat of synthetic enameled paint complete all as specified & directed. |
| 60 | M&L for complete servicing of silver ionization plant of capcity 100000 LPH by incl servicing , greasing, rewinding of feed water pump, repair/replacement of unsv metal bars/electrodes/silver ion rod (Electrode model MX-SIP-25 & size of electrode chamber 75 mm) , repair/replacement of LED or digital display system(incl MCB switch, microprocessor or any other connected accessories) ,unsv flow meter or any type of control ball valve, water chamber of electrodes, complete painting work with proper color coding same as original and repair /replacement of other connected items etc complete all as specified and directed. |
| 61 | M&L for servicing of Chloronome plant by oiling greasing, gland dori, gasket, motor fan, replacing unserviceable bearings, removing dealignment of agitaor shaft, locking keys, blades, servicing of dosing pumps, detecting & fixing minor faults, replacing u/s knob and push buttons etc. complete all as specified and directed. |
| 62 | Repair of chlorine dosing pump of capacity 0-10LPH, minimum 3.5-4.5 Kg/cm2 dosing pressure, 6mm suction tube, 23watt, 230V AC, 50Hz & stoke control system including all connected items, complete all as specified & directed. |
| 63 | M&L for rewinding of chlorine agitator induction motor of capacity upto 1HP, 1410rpm, 3 phase, 415 V, 50 Hz of any make with copper conductor of the same specification as per old one after dismantling / cutting out burnt windings from stator assembly, cleaning slots complete all as specified & directed. |
| 64 | Supply and fix wall mounting type panel with automatic Star delta starter suitable for (30HP)22 KW motor of appropriately size with overload relay of range 20-32 Amps, power contrctors of suitable capacity, timer range and single phase preventor, ON/OFF actuators etc with MCCB 100 Amp, 4 Pole, 25KA as main switch including taking down old un-serviceable panel complete all as specified and directed. |
| 65 | Supply and fix wall mounting type panel 3 phase automatic Star delta starter suitable for 12.5 HP motor with suitable overload relay of range, timer relay, thermal overload protection with digital Amp meter and voltage meter etc including taking down old un-serviceable panel complete all as specified and directed. |
| 66 | Supply and fix wall mounting type panel 3 phase automatic Star delta starter suitable for 7.5 HP motor with suitable overload relay of range, power contrctors of suitable capacity, timer range and single phase preventor, ON/OFF actuators etc with MCCB as main switch,with digital Amp meter and voltage meter etc including taking down old un-serviceable panel complete all as specified and directed. |
| 67 | M&L for lifting defective submersible Motor / Pumpset with column pipes (any number) from borewell, setting aside and stacking column pipes for reuse & Motor/Pumpset for checking of repair work, Transportation defective Motor/ Pumpset to contractor workshop for rewinding/repairing & Back after repairing, Testing complete to bore well for lowering with column pipes in the borewell as existing with new nut, boltsand washer including rubber gasket 3 mm thickand making water and electrical connections as existing for running of pump motors complete all as directed. Note:- (i) T&P required for lifting and lowering for submersible pump set column pipe (any number) shall be provided by the contractor.(ii) Necessary safety precautions for workmen shall be the responsibility of the contractor. (iii) The pumping set after repair shall be lowered as per the manufacture specification. |
| 68 | M & L for carrying out following repairing works to submersible motor 3 phase, 415 volts 50 Hz of 7.5 HP capacity. (a) Dismantling of motor complete, taking out worn-out / burnout winding wire complete and rewinding the motor with PVC insulated copper winding wire of appropriate gauge as per manufactures specifications and replacement of following parts and assembling the complete motor and install, testing and commissioning etc. (b) Cost is included for the repair/Replacement of Motor Parts (i) Thrust plate (ii) Gun metal bush set with brazing the motor and coupling (iii) Rubber water seal as per manufactures specification (iv) Required size of submersible copper cable for connection (Not more than 10 RM) (Note :- rate for lifting and lowering of complete pump 2nd column pipe will be measured as one job and paid seperately complete all as specified & directed. |
| 69 | M & L for Disconnection of pump from motor for repair including replacement of following warn out parts (Whichever is required) and reassembling complete after repair to submersible pump set with motor 3 phase, 415 volts 50 Hz of 7.5 HP capacity. (i) Bronze Impellers (ii) Gun metal impellers (iii) Gun Metal Guide bush (iv) Gun Metal Diffuser (v) Gun Metal Neck-ring (vi) Gun Metal Coupling bush with MS key (vii) Sand protection ring (Note :- Rate for lifting/lowering of complete pump and column pipe will be measured as one job and paid seperately complete all as specified & directed. (ii) Cost is Included for the above material from Sl No (i) to (vii) |
| 70 | Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI earthing strip 32x6mm by means of GI bolts/nuts/washers and protected by 40 mm bore GI light grade pipe upto test point or upto main switch board / electric equipment / pole / lightning arrestor / HT/LT equipments / GODO switch etc, fixing with 02 Nos nuts and bolts and purchasing pipe fixed with and including flat iron clamps, bolts, nuts and washers. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common salt all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50m, Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x5mm embedded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) complete all as specified and as directed by Engineer-in-charge.Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing strip upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor complete all as specified & directed. |
| 71 | Taking out 2.5 LGPD capacity bed of filteration plant and complete removal of old filter media from bed of filtration plant and stacking at clear places out side of the filtration plant for reuse/removal from site of the following capacities filter beds, complete including cleaning/washing of filter bed, walls and floors with bleaching powder/Chemical and removal of all dirts, silt, mud etc by using brushes complete all as specified & directed. |
| 72 | Cleaning/washing 2.5 LGPD capacity bed of filteration plant of lateral and header pipe of filter bed checking the perforation of the header and lateral pipe, redoing the choked perforation by using hand drill replacement of the defective lateral and header pipe with fittings & make holes (pipe with fittings including cutting, welding and making holes as required to complete the system of header manifold and lateral pipe as per existing system of filter shall be measured separately) and applying two coats of black bituminous paint to the lateral and header pipe with non toxic, non de solving to the water suitable for drinking purpose of following capacity of filter beds complete all as specified and directed. NOTE: Complete system of lateral pipes and header manifold of filter repaired under this item shall be tested before placing filter media to ensure that there is no leakage in the system to the entire satisfaction of Engineer in Charge. |
| 73 | Segregation of filter media for 20 to 40mm Gravel - (3.8 * 2.8 * 0.16) * 2 obtained vide item No. 71 above by using seive analysis and stacking the material grade wise and further segregation/screening of defective and serviceable media manually grade wise complete all as specified & directed. |
| 74 | Segregation of filter media for 12 to 20mm Gravel - (3.8 * 2.8 * 0.21) * 2 obtained vide item No. 71above by using seive analysis and stacking the material grade wise and further segregation/screening of defective and serviceable media manually grade wise complete all as specified & directed. |
| 75 | Segregation of filter media for 6 to 12mm Gravel - (3.8 * 2.8 * 0.25) * 2 obtained vide item No. 71 above by using seive analysis and stacking the material grade wise and further segregation/ screening of defective and serviceable media manually grade wise of the following grade of filter media |
| 76 | Segregation of filter media for 0.35 to 0.50mm sand - (3.8 * 2.8 * 0.75) * 2 obtained vide item No. 71 above by using seive analysis and stacking the material grade wise and further segregation/screening of defective and serviceable media manually grade wise complete all as specified & directed. |
| 77 | Cleaning/washing of serviceable filter media for 20 to 40mm Gravel by spreading clean water with pressure using compressor/pump set including acid washing and keeping in the water reservoirs for 24 hours minimum for removing all scales/ dirt/muds/foreign materials etc and finally washing with clear potable water of following filter media and stack saprately for reuse complete all as specified & directed. (Note: Making/providing water reservoir is deemed to be included in unit rate) |
| 78 | Cleaning/washing of serviceable filter media for 12 to 20mm Gravel by spreading clean water with pressure using compressor/pump set including acid washing and keeping in the water reservoirs for 24 hours minimum for removing all scales/ dirt/muds/foreign materials etc and finally washing with clear potable water of following filter media and stack saprately for reuse complete all as specified & directed. (Note: Making/providing water reservoir is deemed to be included in unit rate) |
| 79 | Cleaning/washing of serviceable filter media for 6 to 12mm Gravel by spreading clean water with pressure using compressor/pump set including acid washing and keeping in the water reservoirs for 24 hours minimum for removing all scales/ dirt/muds/foreign materials etc and finally washing with clear potable water of following filter media and stack saprately for reuse complete all as specified & directed. (Note: Making/providing water reservoir is deemed to be included in unit rate) |
| 80 | Cleaning/washing of serviceable filter media for 0.35 to 0.50mm sand by spreading clean water with pressure using compressor/pump set including acid washing and keeping in the water reservoirs for 24 hours minimum for removing all scales/ dirt/muds/foreign materials etc and finally washing with clear potable water of following filter media and stack saprately for reuse complete all as specified & directed. (Note: Making/providing water reservoir is deemed to be included in unit rate) |
| 81 | Taking out old serviceable sand obtained from item No. 70 of correct seive size from work site and depositing to store to a distance for top up the sand while back washing of filter bed complete all as specified & directed. |
| 82 | Removing of unserviceable filter media of any size from work site to the low lying area distance not exceeding 100 m from filteration plant complete all as specified & directed. |
| 83 | Packing only carefully old serviceable filter media for 20 to 40mm Gravel obtained from items No.70 above complete all as specified & directed. |
| 84 | Packing only carefully old serviceable filter media for 12 to 20mm Gravel obtained from items No.70 above complete all as specified and directed. |
| 85 | Packing only carefully old serviceable filter media for 6 to 12mm Gravel obtained from items No.70 above complete all as specified and directed. |
| 86 | Packing only carefully old serviceable filter media for 0.35 to 0.50mm sand obtained from items No.70 above complete all as specified and directed. |
| 87 | Supply and packing carefully filter media for 20 to 40mm Gravel free form clay, dirt and smooth and round/oval suitable for filtration of drinking water complete all as specified and directed. |
| 88 | Supply and packing carefully filter media for 12 to 20mm Gravel free form clay, dirt and smooth and round/oval suitable for filtration of drinking water complete all as specified and directed. |
| 89 | Supply and packing carefully filter media for 6 to 12mm Gravel free form clay, dirt and smooth and round/oval suitable for filtration of drinking water complete all as specified and directed. |
| 90 | Supply and packing carefully filter media for 0.35 to 0.50mm sand free form clay, dirt and smooth and round/oval suitable for filtration of drinking water complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender