Tender For special Repair Of Perimeter Wall Of Army Public School (Pre-Primary And Primary Wing) At Kanpur Cantt Under Ge (I) Kanpur
Tender Value
43.85 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
5 days left
EMD
87700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Perimeter Wall Of Army Public School (Pre-Primary And Primary Wing) At Kanpur Cantt Under Ge (I) Kanpur
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE(I) Kanpur Name of Work : SPL REPAIR OF PERIMETER WALL OF ARMY PUBLIC SCHOOL (PRE-PRIMARY AND PRIMARY WING) AT KANPUR CANTT UNDER GE (I) KANPUR Contract No : GE(I)/KAN/T-19 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Items/Works Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 3 | M&L for Cement concrete (1:3:6) (using 40 mm graded stone aggregate) type C2 as in foundations, filling and mass concrete complete all as specified and directed. |
| 4 | M&L for RCC M-25 Design Mix using (using 20mm graded stone aggregate) as in foundations footing, plinth beams, bases for columns and basement slab, under reamed piles and mass concrete complete all as specified and directed. |
| 5 | Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar for rough finished flat surfaces of concrete complete all as specified and directed. |
| 6 | Returning/filling in layers and ramming in layers using excavated soil incl sprading, levelling, well ramming in layers not less than 25cm thick in hard/dense soil complete all as specified and directed. |
| 7 | M&L for RCC M-25 Design Mix using (using 20mm graded stone aggregate) as in columns, pillars, posts & struts complete all as specified and directed. |
| 8 | Use & waste of formwork to sides of pilars,posts, struts, piers, columns and stanchions, rough finished square, rectangular or polygonal surfaces of concrete complete all as specified and directed. |
| 9 | M&L Reinforced cement concrete M-25 (Design mix) (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed. |
| 10 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings,lintels, etc. for rough finished surface of concrete flat complete all as specified and directed. |
| 11 | M&L for TMT bars 10mm dia & over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed |
| 12 | All as per item No 10.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 13 | M&L Brick work old size sub class ' B' bricks straight or curved in plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 14 | M&L 15 mm thick rendering on fair faces of concrete in CM 1:4 finish the surface even & smooth without using extra cement complete all as specified and directed |
| 15 | M&L for preparation of newly plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 16 | S&F Mild steel work like angle iron,flat iron etc in posts and struts in fencing including to shape as directed,drilling holes,notching for wire etc conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 17 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over and including a coat of red oxide primer of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed. |
| 18 | S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured) complete all as specified and directed. |
| 19 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 and including for portion framed and hung as gates, including pintle hinges, stopes, hand-made sliding bolts etc, complete all as specified and directed. |
| 20 | M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding to edges of granite stone slabs complete all as specified and directed. |
| 21 | M&L for preparation of new steel or iron surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat zink chrome red oxide primer complete all as specified and directed. |
| 22 | Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articals complete all as specified and directed. |
| 23 | S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as in weep holes complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender