Tender For Conversion Of Lt Overhead Conductor To Underground Lt Cable And Connected Works Of Street Lights In Zone-Ii Under Ge Gurdaspur.
Tender Value
46.80 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
25 days left
EMD
93600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurdaspur → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Conversion Of Lt Overhead Conductor To Underground Lt Cable And Connected Works Of Street Lights In Zone-Ii Under Ge Gurdaspur.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and taking down existing ACSR conductor of any size by opening the binding wire for LT electric poles complete all as specified and directed. |
| 2 | Taking down any type insulator complete all as specified and directed by Egineer-in-Charge. |
| 3 | Excavation in trenches in soft/ loose soil including cutting road surfaces n.exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for poles, stay, cable, pipe etc getting out complete all as specified and directed. |
| 4 | Removal of excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 5 | Returning, filling in, including spreading, leveling,watering and well ramming in layers n.exc 25 cm thick in soft loose soil all as specified. |
| 6 | Supply and laying burnt bricks sub class 'B' old size (compressive strength not less than 75 kg per sqcm) for protection of cable laid in trenches for under ground cable complete all as specified and directed. |
| 7 | M&L for sand cushioning in trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable & 8cm after laying the cable complete all as specified and directed. |
| 8 | S&F for cable protection GI tubing light grade fixed along the pole/ wall/ under road of size 40 mm bore with necessary clamps (where required) nut and bolts all as specified and directed by Engineer -in- Charge. Note :- Clamps, nut and bolt will be measured and paid for separately. |
| 9 | Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 16 Sqmm 4 core complete all as specified and directed. |
| 10 | Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 25 Sqmm 4 core complete all as specified and directed. |
| 11 | Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 35 Sqmm 4 core complete all as specified and directed. |
| 12 | Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 50 Sqmm 3.5 core complete all as specified and directed. |
| 13 | M&L for road cutting, including excavation returning filling in, spreading levelling, well ramming in layers not exc 25cm thick each soiling with, broken boulders stones, WBM 7.5 cm thick coarse aggregate received from dismentling the existing WBM of road, watering and ramming, 40 mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) for road patch repair work, section/ cross section area of cutting shall be same as of existing specification complete as specified and as directed by Engineer-in-Charge. |
| 14 | M&L for precast RCC route indicator made of RCC (1:2:4 type B-1 using 20mm graded crushed stone aggregate) of size 150 x 150 x 900mm with 8mm dia reinforcement @ 100 c/c both ways duly engraved \\" LT cable/ Joint/ Feeder No\\" including two coats of synethic enamel paint complete all as specified and directed. |
| 15 | S&F junction box poly corbonate with glass fibre reinforced, environment friendly, recylable, UV resistant, halogen and silicon free anti acid and anti corrosive IP 66/67 in accordance with IE rule internally embedded gasket, junction box including 3 phase 415 volt aluminium bus bar and din rail for fixing the MCB including one No MCB SP 6A 10KA to control the street light with necessary clamps, nuts bolts to fix the junction box with poles complete all as specified and directed. |
| 16 | S&F of three single core PVC insulated cable with stranded copper conductor of size 1 sqmm fixed in and incl non metallic PVC conduit including fixing accessories of conduit i.e clamps, nuts and bolts complete all as specified and directred. |
| 17 | A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Rs. 61,000/- Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 32 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender