Tender For Special Repair Of Bldg Nos P-583, P-587, P-588 & P-589 At Sasf Odianwali
Tender Value
58.72 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
16 days left
EMD
1.13 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Fazilka → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Bldg Nos P-583, P-587, P-588 & P-589 At Sasf Odianwali
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 sqm each & removing to store all as specified and directed by Engineer - in-Charge. |
| 2 | Taking down chowkats with shutters (without taking off shutters from the frame) exceeding 1.50 sqm each but not exceeding 4 sqm) removing to store all as specified and directed by Engineer - in-Charge. |
| 3 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of but of Frame size 65x 150 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Note : 1: Test certificate of manufacturer to be provided by contractor . 2. Embossing with barcode of manufacturer engraved over each door frame and shutter is manadatory. |
| 4 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of but of Frame size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Note : 1: Test certificate of manufacturer to be provided by contractor . 2. Embossing with barcode of manufacturer engraved over each door frame and shutter is manadatory. |
| 5 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long, dia 10mm - 2 nos per leaf(b) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos. perleaf(c) Stainless Steel (304 Grade) 100mm size and medium weight butt hinges - 3 nos per leaf complete all as specified and directed by Engineer-in-Charge. Note : 1: Test certificate of manufacturer to be provided by contractor . 2. Embossing with barcode of manufacturer engraved over each door frame and shutter is manadatory. |
| 6 | Providing and fixing 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type skeleton door shutter open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, mesh etc.; and comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as per direction of Engineer-in- Charge. (Note : Stainless steel butt hinges shall be deemed to be inclusive in unit rate quoted of this item.)Note : 1: Test certificate of manufacturer to be provided by contractor . 2. Embossing with barcode of manufacturer engraved over each door frame and shutter is manadatory. |
| 7 | Providing and fixing factory made uPVC white colour casement (openable) window (outward /inward opening) with hinge system, comprising one outer openable shutter glazed with 6 mm thick selected quality toughened glass and one inner openable shutter fitted with stainless steel wire mesh, both fitted in a panel of single common frame, complete all as specified and as directed. The window shall be manufactured from extruded uPVC profiles having wall thickness of 2.3 mm (±0.2 mm) with multi-chamber hollow sections. Frame size shall be 88 mm × 60 mm, sash 60 mm × 73 mm, vertical T-profile (one vertical member between two shutters to divide the opening into two panels) 74 mm × 88 mm, and glazing bead 35 mm × 20 mm. All profiles shall be mitre cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water. EPDM gasket of 1.2 mm (±0.2 mm) thickness shall be provided. Galvanized steel reinforcement shall be inserted in the profiles as required, viz. frame, sash and T-profile of suitable size matching the respective uPVC profiles. The frame shall be fixed to the wall using 8 mm × 100 mm long fasteners. Hardware shall include zinc alloy white powder coated casement handles, zinc alloy white powder coated butt hinges, mild steel transmission gear with multi-point locking system, and suitable locking handles for inner wire mesh shutters. Necessary accessories, fasteners and all fittings required for proper functioning of all four shutters (two glass outer + two mesh inner) shall be included. The stainless steel wire mesh (SS-304) and 6 mm toughened glass shall be measured and paid along with this item. The work shall be completed in accordance with approved drawings, specifications, and directions of Engineer-in-Charge. Payment shall be made on the basis of net opening area measured in square metres.Note : Rate quoted shall include frame, sash, T-profile, hardware, EPDM gasket, installation, fixing, accessories, SS wire mesh, and 6 mm toughened glass, all complete. |
| 8 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. The stainless steel wire mesh (SS-304) and 6 mm toughened glass shall be measured and paid along with this item. The work shall be completed in accordance with approved drawings, specifications, and directions of Engineer-in-Charge. Payment shall be made on the basis of net opening area measured in square metres.Note : Rate quoted shall include frame, sash, T-profile, hardware, EPDM gasket, installation, fixing, accessories, SS wire mesh, and 6 mm toughened glass, all complete. Area not exceeding 2.50 sqm each |
| 9 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles dulyreinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mmsize for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note : -Payment shall be made on the basis of net opening area measured in square metres. |
| 10 | S&F 6 mm thick frosted glass fixed in uPVC window/ ventilator cut to required size and fixed with PVC/Neopane gasket etc. complete all as specified and directed . |
| 11 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specifed and directed. |
| 12 | Material and labour for providing kitchen cabinet and cubboard in required sizes at site made out of 18mm thick PVC sheet (prelam) having one side decorative laminated sheet (for shutter, sides of cabinet, partition and shelves etc). All the edges of shutter and front exposed edge of partition/shelves shall be covered with 2mm thick edge bonding tape as per manufacturer, including all required fixing material such as SS brackets, screws, adhesive etc., including taking out old any type cabinet complete all as specified and as directed by Engineer-in-charge.Note :- (i) The area of each sheet (shutter, sides of cabinet, partition and shelves) shall be measured in sqm for payment.(ii) Magnetic catcher, handles, continuous Piano hinges and PVC frame (where required) shall be measured and paid separately under appropriate item of BOQ.(iii) Any other material required for making/fixing/hanging of cabinet shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 13 | S&F 150 mm long aluminium handle cast type anodised all as specified and directed by Engineer - in - Charge. |
| 14 | S&F Aluminium anodized barrel tower bolt of extended section and fixed 150 mm long all as specified and directed by Engineer-in-Charge. |
| 15 | S&F Aluminium anodized barrel tower bolt of extended section and fixed 200 mm long all as specified and directed by Engineer-in-Charge. |
| 16 | S&F 250 mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed. |
| 17 | S&F Stainless Steel handle 75 mm long all as specified and directed by Engineer-in-Charge. |
| 18 | S & F Magnet ball catcher for cupboard shutter, complete all as specified and directed by Engineer - in-Charge. |
| 19 | S & F continous (Piano) type hinges mild steel bright finish or lectro galvanised with wide of flaps 30mm complete all as spd and directed. |
| 20 | S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor having overall length of cover plate 140mm complete all as specified and directed by Engineer-in-Charge. |
| 22 | S&F factory made prefabricated pressed steel door frame made out of mild steel 1.25 mm thick girth of frame 185 mm including necessary MS rawl plug/bolts and fixing 75 mm long butt hinges medium weight cold rolled mild steel etc and shutter including stiffeners made out of mild steel sheet 1.25 mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitred angle etc as required with locking arrangement using mild steel mortice lock 4 levers with 2 Nos of keys of size 100 mm (Make Godrej/Harrison/Navtal) including MS chromium plated handle and 2 Nos MS locking rods out of 8mm dia not exc 1000mm long fixed to mortice lock and handle with necessary bolts and nuts covered by MS sheet 1.25 mm thick complete including two coat of synthetic enamel paint over a shop coat of zinc chromate primer on interior surface (not visible from front) and hammer tone paint on exterior surface (visible from front) complete as per Godrej pattern all as specified and directed by Engr-in-charge drawing complete all as specified and directed by Engineer-in-charge. (Note :Net opening will be measured for payment including frame and Shutter) |
| 23 | Demolition of cement concrete (unreinforced) of any description and in any position etc. including removal of demolished material out of defence land complete all as specified. |
| 24 | M&L for levelling course for roof slab, Type B0, 1:2:4 (12.5 mm graded aggregate) using waterproofing compound (SBR) for maintaining proper roof slope and finishing cement concrete surface even and smooth wihout using extra cement complete all as specified.(Minimum thickness of concrete should not be less than 50mm at any point including Making Proper finish and smooth at top)Note : Waterproofing compound should be measured and paid seperately. |
| 25 | M & L PCC 1:2:4, type B-1 , using 20mm graded stone aggregate as in kerbs or mud stops, rounded or chamfered on edges and similar work all as specified and as directed. |
| 26 | Supply of SBR waterproofing compound @ 2% of per kg cement used complete all as speccified.Make : Fosroc/Sika/Choksey/Bostik/STP/Asian Paints/Berger Paints |
| 27 | M&L for rendering 15mm thick approved ready-mixed mortar (e.g., SikaTop, Fosroc Renderoc, Asianpaint or equivalent as approved by engr-in-charge) including surface preparation on slab/roof finished even and smooth complete all as specified and as directed. |
| 28 | OVERLAY- PU BASED ELASTOMERIC LIQUIED MEMBRANE SYSTEM FOR EXPOSED ROOF : Providing and applying polyurethane liquid roof waterproofing with improved water ponding capability, elastomeric high build liquid membrane for concrete roofs for exterior wall and exposed surface with solid content not less than 80% and solar reflective index not less than 106 as per (ASTM E1980-19)/tear strength ~20 N/mm (Free film, 14 days, +30 degree C) (ASTM D624) and tensile strength >= 2 N/mm2 (ASTM D4541), elongation 350 to 400% as per ASTM D412 and crack bridging ability upto 2mm.(a) After proper surface preparation, Apply one coat of Primer for PU coating as per manufacturers specification.(b) Apply 1st coat of ShaliUrethane® BTD (white) @ 650 gm / m²(minimum) or equivalent by brush / roller while prime surface is tacky, Spread waterproofing reinforced Glass Fiber mash of 45 GSM with overlaps of 50 mm in both directions when the surface is still tacky. Allow 1st coat to dry. (c ) Apply 2nd & 3rd coat of ShaliUrethane® BTD (white) @ 650 gm / m² (minimum) or equivalent by brush/roller. Make : Fosroc/Sika/Choksey/Bostik/STP/ Asian Paints/Berger PaintsNote : (i) The Minimum dry film thickness (DFT) of roof treatment shall be 1.5mm if any shortfall in thickness of above treatment the same shall be achieved by additional coat. (ii) The procurement of material and execution of the work of water proofing treatment shall be carried out by authorised applicator approved by GE.(iii) The manufacturer/authorised applicator shall give a warranty for the performance & durability for 10 years. |
| 29 | Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc. |
| 30 | M&L 10mm thick rendering in cement mortar 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge . |
| 31 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement with WPC @ 200ml per bag of cement all as specified and directed by Engineer - in - Charge . |
| 32 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of approved ready-mixed mortar material (e.g., SikaTop, Fosroc Renderoc, Asianpaint or equivalent as approved by engr-in-charge) on external surface including surface preparation finished even and smooth complete all as specified and as directed. |
| 33 | Supply only Liquid water Proofing Compound (WPC) all as specified and directed. |
| 34 | M & L for Treating apparent visible efflorescence by first cleaning using hard wire brush and all crystal deposits to be removed. The bricks shall then be cleaned using soft brush of powdery crystals removed. Then make a 1 to 4 solution of vinegar and water (1 part vinegar to 4 part water) and apply it to the afflorescence affected area using a nylon brush. Allow the vinegar/water solution to sit on the serface of the affected area for 15 minutes, but do not allow the solution to dry, Rinse the area with clean water using low pressure jet. Two cycle of cleaning using vinegar water solutions to be repeated complete all as specified and directed by Engineer-in-Charge. |
| 35 | M&L for Water proofing treatment to Walls as specified below complete all as specified and directed by Engineer-in-Charge. :- (a) Apply first coat of two component acrylic polymer modified coating (Dr Fixit Fastflex/ Asianpaints Smartcare Damp Block 2K or equivalent as approved by Engr-in-Charge) on the verticle surface (b) Apply second coat of two component acrylic polymer modified coating in perpendicular direction of First coat after 24 hrs complete as specified. (c) After application of second coat and while the material is still wet, coarse sand is sprinkled over the coating so as to ensure proper machanical key is provided for subsequent plaster (d) Apply 15 mm plaster in CM 1:3 with WPC @3% by wt. of cement on vertical surface complete all as specified and as directed by Engineer-in-charge. |
| 36 | M & L for preparation of new surfaces of ceiling incl beams etc. and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer's specification complete all as specified and directed by Engineer-in-Charge. |
| 37 | M & L for preparation of old surfaces by complete removal of existing treatment of painted ceiling incl beams etc. by mechanical equipments like electric wall sander/water jet machine and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer's specification complete all as specified and directed by Engineer-in-Charge. |
| 38 | M & L for preparation of new surfaces of walls incl pillar etc. and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer's specification complete all as specified and directed by Engineer-in-Charge. |
| 39 | M & L for preparation of old surfaces by complete removal of existing treatment of painted walls incl pillar etc. by mechanical equipments like electric wall sander/water jet machine and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer's specification complete all as specified and directed by Engineer-in-Charge. |
| 40 | M & L for preparation of new surfaces of wall/ceiling incl pillars etc. and applying Two or more coats of 100% Premium acrylic exterior emulsion paint in Chemoflauge pattern having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance of required Chemoflauge shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces by mechanical means as per manufacturer's specification complete all as specified and directed by Engineer-in-Charge. |
| 41 | M&L for preparation of old surfaces by complete removal of existing treatment of painted wall/ceiling incl pillar etc. by mechanical equipments like electric wall sander/water jet machine and applying Two or more coats of 100% Premium acrylic exterior emulsion paint in Chemoflauge pattern having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance of required Chemoflauge shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces by mechanical means as per manufacturer's specification complete all as specified and directed by Engineer-in-Charge. |
| 42 | Material and labour for preparation of wall/ceiling surfaces and applying 1 mm thick cement based external wall care putty on old or new plaster surface complete all as specified and directed by Engineer-in-Charge. |
| 43 | Dismantling water tanks and removing to store of 1000 ltr capacity complete all as specified and directed by Engineer-in-Charge. |
| 44 | S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top) hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples,complete all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge. |
| 45 | M&L ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore iron pipe supplied and fixed complete all as specified and as directed by Engineer-in-charge. |
| 46 | S&F PP-R Gate valves (brass insert) as per requirement of the site of 25 mm dia complete all as specified and as directed by Engineer-in-charge. |
| 47 | Taking down eves and gutter and rain water of any size all as specified and directed by Engineer - in - Charge . |
| 48 | Dismantling of CI pipes or reinforced concrete pipes 100 mm dia fixed to wall etc complete all as specified and directed. |
| 49 | Dismantling of CI pipes or reinforced concrete pipes 75 mm dia fixed to wall etc complete all as specified and directed. |
| 50 | Supply & fixing 100mm bore UPVC (SWR) pipes including necessary fittings like band ,tee,coupler, etc. single socketed (pressure rating not less than 6kg/sqcm) in any length with rubber ring joints for drain or rain water fixed along walls with and including PVC clampps and laid in trenches or in floors complete all as specified and as directed by Engineer-in- charge. |
| 51 | M & L for Supply for Pipe Supporting Clamping for Single pipe of PVC dia 110 mm (4\\") down take pipe fixing done with Clamping System consists of Rain Water Bracket Set with Pipe Support Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3\\"): Pipe Support Clamping made of : 1. Rain Water Bracket Set with pipe support channel for 110 mm pipe having Wall Distance 75 mm (3\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs. 2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Rain Water Bracket Set with pipe support channel for 110 mm pipe; Wall distance 75 mm (3\\") - 1 Nos. ; 2. U bolt Rubber Sleeve mounted for 4\\" (110 mm) PVC Pipe Dia. - 1 No.; and 3. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\\") - 2 nos. Fixing Details:Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. |
| 52 | Supply & fixing 75mm bore UPVC (SWR) pipes including necessary fittings like band ,tee,coupler,floor trap etc. single socketed (pressure rating not less than 6kg/sqcm) in any length with rubber ring joints for drain or rain water fixed along walls with and including PVC clamps and laid in trenches or in floors complete all as specified and as directed by Engineer-in- charge. |
| 53 | Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 54 | Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 55 | Taking up or down steel tubing of 25 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F of Water Supply Pipe (20 mm & 25mm) downtake pipes fixing done with Pipe Supporting Clamping System having Profile Bracket+ Slotted C Channel + U Bolt R/M System -1. Domestic Water Supply Down take lines 20mm & 25mm GI-2 nos. from Terrace to 1st & Ground Floor Vertical Fixed line with wall distance 4\\": Pipe Support Clamping made of: 1. Profile Bracket Wall Distance 4\\" made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method-ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921 and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 13 with Serration as per DIN 6923. 2. Slotted \\"C\\" Channel B3 Type to be used of size 10\\" (Continuous Slotted \\"C\\" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material 48mm x 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx, Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923-Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985)-610 grams/m2 (>85 microns). Material Grade: IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty: 1. Profile Bracket Wall distance 4\\"-2 Nos. 2. Continuous Slotted C Channel of B3 Type Size 10\\" - 1 No.; 3. U Bolt R/M for 3/4\\" GI pipe Dia. - 2 nos. 4. Justi Khilla GI coated 2 1/2\\"-4 nos. Fixing details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. Make: Shaivi or equivalent as approved by GE. |
| 57 | Supplying and laying 20mm OD 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed by Engr in Charge. |
| 58 | Supplying and laying 25mm OD 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed by Engr in Charge. |
| 59 | S&F in repair wall mounted Viterous China wash down water closet pan pedestral pattern,white including connection pipe to flushing cistern anti syphonage pipe with pvc flush pipe of 32 mm dia and 'P' or 'S' trap device and including plastic seat cover and concealed cistern with 05 & 10 Ltr both flushing option with mild steel chromium plated hinging complete all as specified and as directed by engineer-in charge. |
| 60 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 61 | S&F in repair vitreous china,white wash hand basin ,pedestal type, flat back size 550x400mm complete all as specified and directed by Engineer-in-Charge. |
| 62 | S&F in repair CP grating with PVC floor trap suitable for 75/100 mm bore floor trap and fixed with white cement complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&F in repair SS bottle trap of 32mm bore dia of discharge pipe with sufficient water seal to prevent foul gases complete all as specified and as directed. |
| 64 | S&F in repair bib taps long body, 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified . |
| 65 | S & F in repair 15mm bore CP Angle cock one way chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified . |
| 66 | S&F in repair 15mm stop valves fancy type, chromium plated with long shank and cup (concealed type) ,cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed. |
| 67 | S&F brass chromium plated wall mixer for mixing hot& cold water screwed down for iron pipe and fixed of approved make as directed by Engr-in- charge. |
| 68 | S&F brass chromium plated central hole basin mixer with regular spout,popup waste system and including 450mm long braided hoses Hot and cold with connection and nuts of approved make complete all as specified and directed by Engr-in-charge. |
| 69 | S&F in repair for brass chromium plated shower rose 150 x 150 mm size with swivel joint including fixing to 15 mm dia steel pipe or union complete all as specified and directed by Engineer-in-Charge. |
| 70 | S&F soap dish brass chromium plated, fixed to plugs with brass chromium plated screws complete all as specified and directed by Engr-in-Charge. |
| 71 | S & F brass chromium plated tubular towel rail 20mm dia “D” type 60 cm long between flanges incldg brackets complete all as specified and directed by Engineer - in - Charge . |
| 72 | S&F in repair PVC connection both side brass unions internal for size 15mm dia and 600mm long all as specified and directed by Engineer-in-Charge. |
| 73 | S&F 600mm x 450mm beveled edge mirror of selected quality glass on 6mm thick commercial plywood and fixed wooden plugs with chromium plated brass screw and cup washes fixed in repair complete all as specified and directed by Engineer-in-Charge.. |
| 74 | S&F drapery curtain rod, stainless steel, 25mm dia with brackets, knobs, end stops etc all as specified and directed by Engineer - in - Charge . |
| 75 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge. |
| 76 | M & L RCC 1:1½:3, (nominal mix), Type A-1, using 20mm graded aggregates as in chajjas, fins, fascias, kitchen plate forms, Cupboard shelves , louvers, parapets and railing etc and the like including necessary formworks all as specified and directed by Engineer - in - Charge. |
| 77 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-Charge. |
| 78 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed. |
| 79 | M&L Brick work with old size fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge . |
| 80 | M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified. |
| 81 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified |
| 82 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; Cooler Stand, railings; framework of water tanks & similar work conforming to Fe 290 Gde E-165 |
| 83 | M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed. |
| 84 | M&L for applying one coat of synthetic enamel paint on old decorated steel surfaces exc 10 cm width or girth including preparation of surfaces , complete all as specified and directed. |
| 85 | M&L for ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed by Engineer - in - Charge . |
| 86 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), remving serviceable tiles to stores and and rubbish off the permises. |
| 87 | M & L for glazed ceramic coloured tiles 7mm thick 300 x 450 mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge. |
| 88 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm th screed bed in CM 1:6 complete all as specified and directed by Engr in Charge. |
| 89 | Demolition of cement concrete (unreinforced) of any description and in any position/old existing felt/ plaster/tiles etc. including removal of demolished material out of defence land complete all as specified. |
| 90 | M & L for 75mm thick cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in sub floors, sub bases etc all as specified and directed by Engineer - in - Charge. |
| 91 | M & L 25 mm thick Cement Concrete 1:2:4 type B–0 using 20mm graded stone aggregates flooring finished even and rough to receive topping layer all as specified and directed by Engineer - in – Charge . |
| 92 | Demolation of ashlar facings, dressed stone work, stone slabs or tiles from paving and precast concrete blocks and articles all as specified.& directed by Engineer -in-charge.. |
| 93 | M&L machine cut kota stone slab flooring 20-25mm thick in single piece over cement screed base laid and jointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing complete inculding screed bed or bedding layer of mortar 15 mm thick CM (1:6)all as directed by Engineer-in-Charge. |
| 94 | M&L for kota stone slab flooring 20-25mm thick in single piece in riser of steps,skirting,dado and pillar laid and jointed with grey cement mixed with pgment to match the shade of the slab including rubbing and polishing complete inculding screed bed or bedding layer of mortar 15 mm thick CM (1:4) all as directed by Engineer-in-Charge. |
| 95 | Cutting ,grinding ,cleaning and treating the surface of existing kota stone flooring with beeswax polishing complete as directed by Engr-in-Charge. |
| 96 | M&L Green marble work 14 to 16mm thick (table rubbed and polished) in single piece in steps,risers, jambs, pillars, window cills, cooking platforms over cement screed base laid and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of the slab including rubbing and polishing complete inculding screed bed or bedding layer of mortar 15 mm thick CM (1:3)all as directed by Engineer-in-Charge. |
| 97 | Providing edge moulding to 16mm thick granite/ green marble stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed by Engineer-in-Charge. |
| 98 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 99 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engineer-in-Charge. |
| 100 | Providing and applying approved ready-mixed / pre-packaged polymer modified structural repair mortar (e.g., SikaTop, Fosroc Renderoc, Asianpaint or equivalent conforming to CPWD specs) including surface preparation, polymer bonding agent/slurry coat, fixing of wire mesh (paid separately), application in layers (max. 20-25 mm per layer for vertical/overhead work), compaction, finishing to match existing profile, curing (minimum 7 days or as per manufacturer), all complete for average thickness up to 25-35 mm complete all as specifed and directed by Engineer-in-Charge. |
| 101 | Providing and fixing galvanized /SS wire mesh (20 mm × 20 mm opening, 24-26 gauge). over prepared RCC surface, including cutting, bending, fixing securely with GI nails/wire ties/anchors at 150-300 mm c/c (staggered), minimum 100-150 mm overlaps, and proper embedding in mortar, complete all as specified & directed by Engineering-in-Charge. |
| 102 | Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface all as spd and directed by Engr-in-Charge. Note: Rate for making good shall be deemed to be included in above item rate. |
| 103 | Taking down unserviceable main switches and MCB distribution boards single phase complete all as specified and directed by Engineer-in-Charge. |
| 104 | Material and labour for concealed Point wiring for one light point/fan point /bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20 mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers for paino type fittings and for 2mm thick galvanised steel pressed sunken box suitable for modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches/ socket / regulator etc, including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. (switch, socket, regulator shall be measured and paid separately under appropriate item of BOQ). |
| 105 | All as per Item No.104 above here in before but for One three pins 5 Amps switch socket outlet point on independent board with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly dolly complete all as specified and directed. (socket shall be measured and paid separately under appropriate item of BOQ). |
| 106 | All as per Item No.104 above here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly dolly complete all as specified and directed. (socket shall be measured and paid separately under appropriate item of BOQ) |
| 107 | All as per Item No.104 above here in before but for One light point controlled by two 2-way switches of 5 amps (switch shall be measured and paid separately under appropriate item of BOQ). |
| 108 | All as per item No.104 above here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.(switch, socket shall be measured and paid separately under appropriate item of BOQ). |
| 109 | Supply & Fixing modular switch 5/6Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ. |
| 110 | Supply & Fixing modular switch 5/6Amps, single pole, two way (1 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ. |
| 111 | Supply & Fixing modular Socket outlet multipurpose type 6 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ. |
| 112 | Supply & Fixing modular Socket outlet multipurpose type 6/16 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ. |
| 113 | Supply & Fixing modular switch 6/16Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ. |
| 114 | Supply & fixing PVC Lamp holder suitable for and including batten fittings ,LED Electric lamp 9 Watt with backalite 20mm back plate complete all as specified & directed, . |
| 115 | M&L for Ceiling Rose, surface bakelite 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 116 | S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 6 to 32 Amps all as specified and directed. |
| 117 | S & F of MCB suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA and 16 to 40 Amps all as specified and directed. |
| 118 | S& F plug and socket type DB (Functional unit)20 Amps capacity with provision of single pole 20 amps MCB,plug top and earth plug,grouted flush to walls complete all as specified. |
| 119 | S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 12 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed.. |
| 120 | S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 8 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed.. |
| 121 | S&F and testing LED light fitting 1x18watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through h oles. The system wattage of fitting should not be more than 18 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin. |
| 122 | S & F LED backup/Rechargeable tube light polycarbonate housing 1x18/20 watt, appx 4 feet long module complete all as specified and directed |
| 123 | S&F sheet metal enclouser TPN DB having facility to fix MCB TPN upto 100 amp and MCB in outgoing, TPN 4 ways, Double door type complete fitted with bus bars, neutral links, IP-43 protection Isolated Neutral bar,door earthing,cement spill protector,insulated bus bar assembly and blanking plates complete all as specified and directed. |
| 124 | Supply and fixing MCB TP 63 Amps 415 Volts complete all as specified and directed by Engineer-in-Charge. |
| 125 | S&F for WEE Plus LED bulk head luminaire of capacity 10 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engr-InCharge |
| 126 | M&L for submain wiring comprising single core ,2 Runs of 10 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. PVC conduits heavy duty and conduit fittings/existing concealed conduit complete, including provision of 1 x 10 sqmm nominal cross sectional area multistranded copper conductor cable PVC insulated unsheathed 1100 Volts grade as earth wire complete incl taking down old UNSV sub main all as specified.Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly. |
| 127 | Supply and hanging /fixing ceiling fan 1200 mm sweep AC Supply (Input Voltage Range ; 120 to 280V), BLDC type, 5 star rated, with remote BEE and ISI Marked super enamelled, copper winding of 'B' class insulation, single phase, maximum 26W (± 10%), Temperature rise 40 degree maximum with remote, 03 No blades, down rod including accessories, white colour, total harmonic less than 10%, 5 speed, hanging in position including making connection with flexible cord three core twisted copper conductor of suitable size from ceiling rose to fan, taking down existing ceiling fan any size and deposited to BSO yard E/m store complete all as specified.Note :- (i) Serial Number as issued by Engr-In-Charge of celing fan and GE Office name shall also be written on fan with red colour permanent marker , cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account |
| 128 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre,BEE 5 Star rated complete with all accessories such as safety valve,thermostate,NRV, connection piece etc complete all as specified and directed by Engineer-in-Charge. |
| 129 | M&L for making holes for Exhaust fans/Air freshener for size of 250/230mm dia and filling the old holes with suitable material and making good surface and finishing, painting with existing colour and cleaning the stie complete all as specified and directed by Engineer-in-Charge. |
| 130 | Supply and fixing Air freshener fan PVC body, AC single Phase 230V, 50 Cycle per second, size 250mm sweep with blades and frame including self closing louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. |
| 131 | Supply only evaporative air coolers (desert coolers) as per IS 3315:2019 sump tank capacity not less than 80 liters, single phase having air flow capacity 4000 cum per hrs, cooling efficiency not less than 65 %, maximum power consumption 300 watts, plastic body, noise level not more than 65dBA at 1 m distance, honeycomb pads complete all as specified and directed. |
| 132 | M & L for preparation of old painted surfaces of LT panel size (up to 2.0x1.5mx0.8m) and applying spray painting with two coats of synethetic enamel paint over a coat of red oxide primer of existing color for outdoor/indoor panel board, outer & inner side and scraping out the old paint surfaces of existing panel boards including PCC for base (1:2:4) and white wash to panel foundation/PCC base complete all as specified and directed by Engr-In-Charge . |
| 133 | Supply and fix in replacement of digital Ammeter 0 - 100 Amps complete all as specified and directed by Engineer-in-Charge. |
| 134 | Supply and fix in replacement digital Voltmeter 0 - 500 Volts complete all as specified and directed by Engineer-in-Charge. |
| 135 | Supply and fix in replacement neon indicating lamp (Red, Yellow, Blue) complete all as specified and directed by Engineer-in-Charge. |
| 136 | Material and Labour MS work as in doors or gates or other section with gusset plates etc for LT panel, drilled for fixing of steel sheeting or other covering in doors or gates etc. including hooks, hinges, steel hanging door fittings , fastening, locking arrengement incuding painting of two coats of enamel paint over one coat of zinc coating primer complete all as specified and directed. Note :- Disconnection of cables/wires, repair of broken doors/gates of panels and DB's by necessary welding with painting deemed to be included in rate quoted by contractor. |
| 137 | S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 4 core complete all as specified and as directed by Engineer-in-charge. |
| 138 | Excavation in trenches in any type of soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC/Steel tubular poles/stays and struts etc getting out including trimming sides and forming bottom surface all as specified and directed at site. |
| 139 | Returning, filling in including spreading, leveling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site |
| 140 | Removal of excavated surplus material to a distance n. exc. 50 mtr away in layer n. exc. 25cm from the starting point all as direcet by Engr-in-Charge. |
| 141 | Supply and laying double wall corrugated pipe (DWCP), Non-metallic, resistance to compression : type 450, resistance to impact; normal, resistance to bending: pliable, resistance to external influence; ingress protection: IP 67, resistance against corrosion: without protection, resistance to flame propagation: non flame propagating, nominal outside diameter 77 mm minimum inside dia 63 mm conforming to IS-16205 (part-24) 2017 including necessary jointing material i.e snap fit coupler with rubber ring, sealing plug, tees, bend, angel bend etc for passing electrical cable complete all as directed. |
| 142 | Supply and fix light grade 50mm GI pipe fix complete to Wall , Poles etc with suitable clamp for protection of cable complete all as directed |
| 143 | S&F 20 mm bore Galvanised iron tube medium grade with all fitting fixed concealed complete to walls and ceiling or laid in floors, brenches complete all as specified and as directed by Engineer-in-Charge.. |
| 144 | S & F stop valve size 20 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge. |
| 145 | Earthing complete with galvanised steel earth plate electroe 60 cmx60cm6mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connectedto and including galvanized earth lead GI Strip of size 32x6mm by means of GI bolt/snuts/washers, protected by 40mm bore GI light grade pipe from earth plate & upto 3m long pole fixed with 2 clamp made from mild steel flat iron 32x6mm bolts, nuts, washer etc. earth plate shall be surrounded by alternate layer of charcoal or coke and common salt 15cm thick all around buttom and top of earth plate 20mm dia GI Medium grade pipe for watering and including funnel, wire mesh, RCC cover & frame PCC 1:3:6 type C1 using 20mm graded stone aggregate as in earthing pit including necessary excavation & earth work all as specified & shown on electrical plate No. 3 of SSR Part-I, (Note: (i) PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner (ii) earthing for Lightning protection is also included in the above item) |
| 146 | Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI earthing wire of size 4 mm dia by means of GI bolts/nuts/washers and protected by 15 mm bore GI light grade pipe upto test point or upto main switch board, HT/LT equipments, fixing with 02 Nos nuts and bolts and protection pipe fixed with and including flat iron clamps, bolts, nuts and washers. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common salt all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50m, Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) complete all as specified and as directed by Engineer-in-charge.Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing wire upto test point or upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender