Tender For Repair And Maintenance To Otm Buildings In North Complex Under Age B/R Ii At Ima Dehradun.
Tender Value
35 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
19 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance To Otm Buildings In North Complex Under Age B/R Ii At Ima Dehradun.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete as specified . |
| 2 | Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed. Note-water proofing compound shall be measured and paid separately. |
| 3 | Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | Supply only Liquid water proofing compound. |
| 5 | Raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc in cement mortar complete all as specified and directed. |
| 6 | M&L for Preparation of newly plastered or scrapped surfaces of wall or ceiling by making free from dampness, oil or any loosely held particles, filling cracks if any with crack seal and applying a coat of Dampstop Advanced of Berger or equivalenet of Sika/ Asian Paint/ Fosroc on saturated dry surface of wall as per manufacturer instruction complete all as specified and directed. Note : Work will be carried out upto a height of 12 mtrs complete all as specified. |
| 7 | Complete removal of existing treatment from wall or ceilling surfaces by scrapping with mechanical sander machine upto entire saticsfication of Engr-in-Chage, all as specified and directed. Note : Work will be carried out upto a height of 12 mtrs |
| 8 | M&L for Preparation of newly plastered or scrapped surfaces of wall or ceiling and applying 1.5mm thick damp proof wall care putty in two coats as per manufacturer instruction complete all as specified and directed. Note : 1. Work will be carried out upto a height of 12 mtrs. 2. Rates shall be inclusive of scaffoldings and other arrangements to reach the required height. |
| 9 | M&L for Preparation of newly plastered or scrapped surfaces of wall or ceiling and applying 1.5mm thick damp proof wall care putty in two coats as per manufacturer instruction complete all as specified and directed. Note : 1. Work will be carried out upto a height of 12 mtrs. 2. Rates shall be inclusive of scaffoldings and other arrangements to reach the required height. |
| 10 | M&L for Preparation of old plastered surfaces/Putty surface of walls/ceilings by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed. Note: 1. Work will be carried out upto a height of 12 mtrs. 2. Rates shall be inclusive of scaffoldings and other arrangements to reach the required height. |
| 11 | M&L for Preparation of old treated plastered surfaces of wall and applying one coat of weather proof exterior emulsion paint complete all as directed. Note: 1.Work will be carried out upto a height of 12 mtrs. 2. Rates shall be inclusive of scaffoldings and other arrangements to reach the required height. |
| 12 | M&L for Preparation of old treated plastered/Puttied surfaces of walls and applying two coats of weather proof exterior emulsion paint complete all as directed. Note: 1. Work will be carried out upto a height of 12 mtrs. 2. Rates shall be inclusive of scaffoldings and other arrangements to reach the required height. 3. Second coat will only be applied after approval of first coat by Engr-In-Charge. |
| 13 | M&L for Preparation of old cement concrete interlocking paver block/chequered tile floor and similar flat concrete area on path, pedestal, hardstanding by brooming down or steel wire brushing, scrapping , removing grass roots in joints of paver block and cleaning all loose dirt & dust from the surface by fanning with air compressor and applying one coat of weather proof exterior emulsion floor paint as per original colour and pattern of tile, complete all as specified & directed. |
| 14 | M&L for preparation old steel surfaces (gates, fencing, grills, trusses, steel roof sheets and similar surfaces) of height upto 15 mtrs by removing mildew, dirt and any loose flaps of old paint and applying one coat of synthetic enamel paint by mechanical means (airless spaying machine) complete all as per manufacturer Instruction incl all scaffoldings and T&P and as directed by Engr in Charge. |
| 15 | M&L for preparation old steel surfaces (gates, fencing, grills, trusses, steel roof sheets and similar surfaces) of any height by removing mildew, dirt and any loose flaps of old paint and applying two coats of synthetic enamel paint by mechanical means (airless spaying machine) complete all as per manufacturer Instruction incl all scaffoldings and T&P and as directed by Engr in Charge. |
| 16 | Preparation of Old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. |
| 17 | Preparation of Old painted steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint with approved shade complete all as specified and directed. |
| 18 | M&L for for preparation of old painted concrete, brick, stone or plaster surfaces including kerb stone, pillar surface and similar of any description over 10 cm width and girth and applying one coat of synthetic enamel paint complete all as directed. |
| 19 | M&L for preparation of old painted wooden surfaces over 10cm width & girth and applying one coat of synthetic enamel paint complete all as specified. |
| 20 | M&L for French polishing one or more coat on old polished wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler surfaces complete all as specified & directed. |
| 21 | M&L preparation of old polished wooden surfaces of any description over 10cm width or girth and applying one coat of manson polish and buffing/polishing with floor grinder cum polisher machine upto the satisfaction of Engr-In-Charge complete all as specified. |
| 22 | M&L for one coat of primer on wall / ceiling through normal applications complete upto to the height 15m complete all as per manufacturer instruction and directed by Engr in Charge (Rate shall be inclusive of scafolding and other arrangement to reach height) complete all as specified. |
| 23 | M&L for preparation of old surfaces and applying one coat of plastic emulsion paint (shade as directed) on wall / ceiling complete upto to the height 12m complete all as directed. |
| 24 | M&L for preparation of old surfaces and applying two coats of plastic emulsion paint (shade as directed) on wall / ceiling complete upto to the height 12m complete all as directed. |
| 25 | M&L for complete removal of existing paint and Finishing walls with textured exterior paint of required shade (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and as directed. |
| 26 | S&F in repair 4mm thick Asbestos cement plain building boards, fixed to timber framework with screws complete all as specified and as directed. |
| 27 | S&F in repairs 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified. |
| 28 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 29 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed |
| 30 | Taking down shutter of any description exc 2 sqm each complete all as specified and directed |
| 31 | S & F 40mm thick 1st class H.W teak wood timber plain framed and arch/rectangular shape on top paneled shutters (any number of decorative panels and design as approved by Engr-in-Charge) kiln seasoned and chemical pressure treated complete all as specified and directed. |
| 32 | S&F 40mm thick 1st class H.W wood decorative plain framed glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc. (with sash bars), divided in to square, edges of framing plain, chamfered or rounded ,fitted with cut and mitered bead for securing glasses etc, (design as approved by Engr-in-Charge) complete all as specified and directed. |
| 33 | S&F Ist Class hard wood, Plain and semi circular at top chowkats & frame wrought rounded or chamfered put together with glue pinned atg joints and fixed complete all as specified and directed |
| 34 | M&L for French polishing two or more coats on new polished wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler surfaces complete all as specified & directed. |
| 35 | S&F in repair 4mm thick sheet glass ordinary quality & glazing with oil putty or wooden/metal beads in square in each pane, complete, all as specified and directed. |
| 36 | S&F 150 mm butt hinges, cast brass with mild steel hinge pin, bright polished and fixed type C-12 complete all as specified and directed. |
| 37 | S&F 75 mm butt hinges, cast brass with mild steel hinge pin, bright polished and fixed type C-12 complete all as specified and directed. |
| 38 | S&F 300 mm long, fancy type, Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as directed. |
| 39 | S&F 150 mm Brass handles, cast type, polished bright complete all as specified and directed. |
| 40 | S&F Rim latch 150 mm length with two levers, of full brass body with brass knob or lever handle and fixed |
| 41 | S&F 300 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed |
| 42 | Taking down door fittings like tower bolts, handles, hinges, sliding bolts and like from doors/windows complete. |
| 43 | M&L for application of Ist coat including preparation of existing black top road surface by brushing with wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the plain surface with gunny bags or air compressor and to remove all loose dirt and applying one coat of black road marking paint (water based) spraying with mechanical means (airless spraying machine) complete all as specified and directed. |
| 44 | M&L for application of 2nd coat after two days of Ist coat (given in Item No.-1) and preparation of existing black top road surface by brushing with wire brushing for removing cacked mud etc sweeping with brooms and finally fanning the plain surface with gunny bags or air compressor and to remove all loose dirt and applying one coat of black road marking paint (water based) spraying with mechanical mean (airless spraying machine) complete all as specified and directed. |
| 45 | M&L for 16-18mm thick lakha stone (granite) work in path / vertical surface polished as in floor / vertical surface etc .Over and including 15mm thick screed bed in cement mortar 1:4 set and jointed in neat cement slurry and pointed coloured cement to match the surface incl demolition of old stone complete all as specified and directed by Engr-in-Charge. |
| 46 | M&L for 16-18mm thick granite (jet black premium quality) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms, shelves in cupboard,handwash places and like including necessary cutting and grooving to walls, rounding edges and making good by pointing in cement mortar (1:2) using admixture of pigment to match with shade of granite over and including cement screed bed Cement Mortar (1:6) 15 mm thick colour of granite as approved incl demolition of old stone all as specified and directed by Engr-in-Charge. |
| 47 | M&L for Machine cut kota stone slab flooring mirror finished 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete incl dismantling of Old kota stone all as specified and directed. (No extra payment will be made for patch repairs) |
| 48 | S&F in repairs Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, fixing in walls and making good the disturbed area complete all as specified and as directed. |
| 49 | M&L for polished clay terracota wall cladding tiles of size 230x75x10-12mm or as approved by Engr-In-Charge, set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments in vertical surfaces including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles after dismantling old tiling complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender