Tender For Addition/ Alteration Of Room Of Room No. 4, 5, 6 & 7 Of Sag Main Building At Metcalfe House Under Ge (I) R&D Delhi.
Tender Value
9.70 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
14 days left
EMD
19400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/ Alteration Of Room Of Room No. 4, 5, 6 & 7 Of Sag Main Building At Metcalfe House Under Ge (I) R&D Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. |
| 2 | Taking down cement plaster/grit plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubing down with water etc complete all as specified and directed. |
| 3 | M&L 15mm thick rendering in CM (1:6) on fair faces of new or old brick works or concrete work finished even & smooth without using extra cement complete all as specified and directed. |
| 4 | M&L 5mm thick rendering in CM (1:3) on ceiling new or old brick works or concrete work finished even & smooth without using extra cement complete all as specified and directed. |
| 5 | M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of alkali resistant primer and including two coat of wall care putty (Average thickness 1mm) to achieve smooth finish complete all as specified and directed. |
| 6 | M&L preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper (white or tinted) over a coat of alkali resistant primer and including two coat of wall care putty (Average thickness 1mm) wall care putty to achieve smooth finish complete all as specified and directed. |
| 7 | M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls including pilasters and cornices etc. including washing, rubbing down and stopping the previously treated surfaces and applying two coat of oil emulsion distemper of approved shade/tint over and including two coat of wall care putty (Average thickness 1mm) wall care putty to achieve smooth finish complete all as specified and directed. |
| 8 | M&L complete removal of existing treatment on ceiling surfaces with sand paper, iron patti or grinder, including pilasters and cornices etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots etc and applying two coat of oil emulsion distemper of approved shade/tint over and including two coat of wall care putty ( Avg thickness 1mm) wall care putty to achieve smooth finish complete all as specified and directed. |
| 9 | M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of tint as approved complete all as specified and directed. |
| 10 | Demolition of cement concrete unreinforced in ground floors and pavings etc not exceeding 15cm thick above or below ground level complete all as specified and directed. |
| 11 | M & L for PCC (1:4:8) type D-2 using 40mm graded stone aggregates for sub bases of floor, mass concrete finished even and rough to receive topping layer completed all as specified and directed by Engineer-in-Charge. |
| 12 | M & L for PCC (1:2:4) type B-2 using 40mm graded stone aggregates for base of floor, mass concrete finished even and rough to receive topping layer completed all as specified and directed by Engineer-in-Charge. |
| 13 | Providing and fixing vitrified ceramic floor tiles of light shade, polished finish, 8mm to 9mm thick, square or rectangular in shape, having area of each tile exceeding 0.16 Sqm but not exceeding 0.36 Sqm, laid over a 15mm thick cement mortar screed bed in the proportion of (1:6). The tiles shall be set, bedded, and jointed in neat cement slurry, and the joints shall be pointed and finished with white or coloured cement to match the shade of tiles, including all materials, labour, tools, curing, and completion of work in all respects as per specifications and directions of the Engineer-in-Charge. |
| 14 | Providing and fixing light-shade vitrified ceramic tiles, polished finish, 8mm to 9mm thick, square or rectangular in shape, having area of each tile exceeding 0.16 Sqm but not exceeding 0.36 Sqm, in skirting. The tiles shall be fixed over a 15mm thick cement mortar screed bed in proportion (1:4), set and properly jointed in neat cement slurry, with joints pointed and finished with white or matching coloured cement, complete in all respects as per specifications and directions of the Engineer-in-Charge. |
| 15 | Taking down chowkhats or frames with shutter (without taking off shutters from the frame) of size exceeding 1.5 Sqm but not exceeding 4 Sqm and making good to distrubed surface without any extra cost complete all as specified and directed. |
| 16 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm and making good to distrubed surface without any extra cost complete all as specified and directed. |
| 17 | Taking down and Adjusting / repairing of steel window/ventilator shutters for smooth opening/closing including greasing, welding and adjustment of projecting type friction hinges in any position make fully functioning complete all as specified and directed. |
| 18 | M&L securing glass of any description in existing steel frame with putty including removing of old putty complete all as specified and directed. |
| 19 | S&F 4.8mm thick sheet glass ordinary quality in Square/rectangle fixed with glazing pins and rubber beading etc in aluminium door/window/partitions etc complete all as specified and directed. |
| 20 | Dismantling boarding/partitions any description, fixed in any positioin with nails complete all as specified and directed. |
| 21 | Providing and fixing tiled false ceiling of specified materials of size 595mmx595mm in true horizontal level, suspended on inter locking GI metal grid of hot dipped galvanized steel sections consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24mmx38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross \\"T\\" of size 24mmx25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main \\"T\\" at 600mm center to center to form a grid of 1200mmx600mm and secondary cross \\"T\\" of length 600mm and size 24mmx25mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200mmx600mm panel to form grids of 600mmx600mm and wall angle of size 24mmx24mmx0.3mm and laying false ceiling tiles of approved texture having 8 to 10mm thick square edge PVC Laminated Gypsum board Tile of size 595mmx595mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27mm x 37mm x 25mm x1.6mm fixed to ceiling with 12.5mm diameter and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85mm x 30mm x 0.8mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 22 | Dismantling wrought iron or mild steel work of any description not otherwise provided for work including doors, gates, ventilator, angle post etc. complete all as specified and directed by Engineer-in-charge. |
| 23 | S & F Framed work as in Mild Steel Gate of angle, windows, ventilator or other section with gusset plate, rails, braces, stair case, barreled iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks, cover grills and similar work etc Fe-410-W Gde-E-250 complete drilled for fixing of steel sheeting or other covering including welding work, PCC (1:1.5:3) etc to be prepared for hanging or sliding with and including either hooks, hinges, necessary holdfasts or steel hanging door fittings, locking arrangement, gate closer, stopper etc and hanging also fastening and fixing in building upto 8m height complete all as specified and directed by Engineer-in-Charge. |
| 24 | M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of tint over a coat of red oxide zinc chrome primer as approved complete all as specified and directed. |
| 25 | Providing and placing of Workstation of size 1200mm x 600mm and 1200m high as per shape and size shown in attached drawing and approved sample. Provide 3 Nos 400 mm wide wooden drawers, wooden keyboard tray, wooden CPU stand on wheels all as per approved drawing and sample, all drawers with individual lock and telescopic sliding rail as instructed by Engineer-in-Charge, work top as per approved shape and size fabricated with 19mm thick water proof commercial block board in all sides, top, bottom and front, 6mm thick plywood drawer bottom, 1mm thick lamination as approved on all exposed surface of side unit 32mm X 32 mm Teak/Cedar wood moulding on work top as instructed by engineer -in-charge, 3-4mm thick Teak /Cedar wood margin or PVC edge bending on all straight, side and top on all exposed edges complete with all labour and material, Painting/polishing finished with polyurethane , nails, screws, glue and other accessories etc as instructed by Engineer-in-charge. |
| 26 | M & L for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed. |
| 27 | Supply and installation, testing and commissioning of Air cooled Hi Wall split type 2 TR 3 star or maximam rating available in market (indoor and outdoor cooling coil in copper as per ISI) Air conditioners complete with indoor unit (IDUO, Outdoor unit (ODU) , surface/concealed copper rerigrant piping with insulation (close cell elasttomeric nitrilr rubber tublar pipe section ) up to 3m (IDU to ODU ) Copper power cable up to 3.5m (IDU to ODU ) ic drain pipe R-32 /R-410/ R-407 green refrigerant wireless remote control suitable for working between 180- 260 V with low and high voltage cut off and 50 HZ ,1 phase AC supply capable of following capacity with Scroll /rotary compress or the system shall be operate 50℃ complete all as specified and directed. |
| 28 | S&F and testing Voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation 170V to 250V with accuracy of 2.5% and of capacity 5 KVA Complete all as specified and directed |
| 29 | S&F in replacement PVC insulated flexible copper conductor 3 core 1100V grade of size 2.50 Sqmm cable complete all as specified and directed. Please Enable Macros to View BoQ information |
| 30 | S&F in replacement PVC insulated flexible copper conductor 3 core 1100V grade of size 2.50 Sqmm cable complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender