Tender For Fixing Of Wire Gauge Shutters, Fixing Of Grill Of Service Block, Windows Etc And Fixing Of Acoustic Panels And Wood Work Of Vc Cubicles And Interview Room At High Security Prison Mahanpur Kathua(C. No.17)
Tender Value
1.55 Crore
Estimated cost
Bid Submission
30 Sep 2026
4 days left
EMD
3.10 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fixing Of Wire Gauge Shutters, Fixing Of Grill Of Service Block, Windows Etc And Fixing Of Acoustic Panels And Wood Work Of Vc Cubicles And Interview Room At High Security Prison Mahanpur Kathua(C. No.17)
BOQ
| Sl. No. | Item Description |
| 1 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Kiln seasoned and chemically treated hollock wood |
| 2 | Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, , and fixed on wooden frame work, complete as per direction of Engineer-in-charge (Frame work shall be paid for separately). 12mm thick commercial ply . |
| 3 | Brick work with FPS bricks of class designation 75 in superstructure to floor v level in cement mortor 1:6 (1 cement :6 coarse sand) incl carriage of materials. |
| 4 | 15 mm cement plaster on the rough side of single or half brick wall of mix 1: 6 ( 1 cement : 6 fine sand ) |
| 5 | Reinforced cement concrete work in beams, suspended floors, , landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete (TMT Bars). |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for;- |
| 8 | Providing and fixing 9mm Thick Polyester Acoustic Panels made from Polyester with flame retardant and water ressistant with having NRC- 0.75 and Density of 218 kg /cumfixed with SR ( Heatex) -Adhesive@ 25ml/ sft fixed om wall / celling etc. including cost of 50 mm thick foam inside the acoustic panels ,labour , wastage , and carriage from Delhi to site of work ( complete job) |
| 9 | Providing and fixing 25 mm Thick. Acoustic Foam Panels made from High Density Acoustic Poly -urethene Polyester.water ressistant with having NRC > 0.80 and Density of 40 kg /cum fixed with using Spray Adhesive / SR ( Heatex) -Adhesive@ 25ml/ sft fixed om wall / celling etc. including cost of labour , wastage , and carriage from Delhi to site of work ( complete job) |
| 10 | Providing & fixing of 12 mm thick toughned Glass for cabins including beading etc complete job. interview room cabins |
| 11 | Providing and fixing gang saw cut, mirror polished, prepolished, machine cut for Stair steps and treads ,kitchen platforms, vanity counters, window sills, facias and similar locations , of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, to give high gloss finish etc. complete at all levels Granite of any colour or shade. |
| 12 | Providing edge moulding to 18 mm/16 mm thick Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite Work . |
| 13 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing,panelling and dash fasteners to be paid for separately.Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 14 | Providing and fixing Stainless steel wire guage ( Grade- 304) aperture 1.4 mm and 0.50 mm dia wire. stainless steel screws etc.complete as per architectural drawings and directions of engineer-incharge |
| 15 | Providing and fixing aluminum round shape handle / tower bolt of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge |
| 16 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 17 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharg Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 18 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture excluding primer coat to give an even shade in Two or more coats on new steel work. |
| 20 | Wiring for light points and exaust fans using 2.5 mm pvc insulated fire resisitant multistandard copper conductor recessed in pvc condutis / channels . |
| 21 | Wiring for Heating points using 4 mm pvc insulated fire resisitant multistandard copper conductor recessed in pvc condutis / channels . |
| 22 | Wiring for 3 pin points using 2.5 mm pvc insulated fire resisitant multistandard copper conductor recessed in pvc condutis / channels . |
| 23 | Wiring for for telephone points using 1.5 mm pvc insulated fire resisitant telephone wire multistandard copper conductor recessed in pvc condutis / channels complte job. |
| 24 | P/fixing of ISI mark reputed brand electric items . |
| 25 | exhaust Fans |
| 26 | Mcb ( 6- 32 amp ) |
| 27 | Mcb D.P.( 63 amp ) |
| 28 | 10 way Mcb Box |
| 29 | 15 watt LED ceiling lights |
| 30 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 coarse sand) |
| 31 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 32 | Finishing with Epoxy paint (two or more coats) at all locations preparedand applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete on concrete work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender