Tender For Name Of Work: Development Of Eco Tourism /Biodiversity Park In Dedikoot ,Naihari Range Kehmil Forest Division Kralpora.1- Development Of Eco-Friendly Entrance Gate By Using Wooden Texture.2. Development Of Forest Memorial3. Development Of
Tender Value
61.59 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
7 days left
EMD
1.23 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Name Of Work: Development Of Eco Tourism /Biodiversity Park In Dedikoot ,Naihari Range Kehmil Forest Division Kralpora.1- Development Of Eco-Friendly Entrance Gate By Using Wooden Texture.2. Development Of Forest Memorial3. Development Of 3D Wire Mesh Fence. 4. Development Of Tree House5. Construction Of Wooden Bridge.6. Development Of Eco-Friendly Washrooms7. Development Of Water Pond With Bridge8. Development Of Wooden Gazebo (1St 1 No)9 .Development Of Wooden Gazebo (2Nd) 1 No)10. Development Of Nic11. Development Of Selfie Point At Dedikoot
BOQ
| Sl. No. | Item Description |
| 1 | 1. DEVELOPMENT OF ECO-FRIENDLY ENTRANCE GATE BY USING WOODEN TEXTURE |
| 2 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 4 | P/L of stone soling incl. ramming,hand packing and all carriages, complete job in geocell,trenches,foundation etc. |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe-500D or more.Reinforcement @ for all rcc work |
| 10 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 11 | FORM WORKCentering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 12 | Supply, fabrication, and installation of 6 mm thick glass fiber reinforced plastic (GFRP) panels with decorative wooden pattern finish for column surface cladding/covering work, including corrosion-resistant aluminum/galvanized steel framing for fixing, adhesives, fasteners, joint treatment, and all necessary accessories, complete in all respects, |
| 13 | Providing and installing fibre glass models of animals – Supplying, transporting, and fixing fibre glass reinforced plastic (FRP) animal models of approved design, size, and finish, depicting local fauna such as Hangul (Stag, approx. 1.2–1.4 m height at shoulder and 2 m length), and Markhor (approx. 0.8–1.0 m height and 1.2–1.4 m length with spiral horns). The models shall be made of high-quality FRP duly moulded, painted, and textured to give realistic appearance, and shall be weather-resistant, UV-protected, and suitable for outdoor installation The item includes supply, carriage to site, anchoring arrangements/structural supports wherever required, finishing with exterior-grade paint in approved shades,and complete installation at site as per the directions of the Engineer-in-Charge. |
| 14 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm. Wooden Finish |
| 15 | Providing and fixing wooden board made of seasoned deodar wood, size 9 feet × 1 foot × 2 inches thick, carved on both sides with the name of Forest Department, including all necessary fixing arrangements (steel clamps, screws, supports, etc.), surface finished with polish/paint for durability and aesthetics, complete in all respects as per engineer’s instructions. |
| 16 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Ceme |
| 17 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 18 | Carriage of different materials by Mechanical transport incl. loading, unloading and for stacking at site |
| 19 | Sand 30 km |
| 20 | steel 30 km |
| 21 | cement 30 km |
| 22 | Aggregate 30 km |
| 23 | Carriage of different materials by Manual labour incl. loading, unloading and for a lead of 300 mtr |
| 24 | steel |
| 25 | cement |
| 26 | Aggregate |
| 27 | 2 DEVELOPMENT OF FOREST MEMORIAL |
| 28 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : |
| 29 | P/L of stone soling incl. ramming,hand packing and all carriages, complete job in geocell,trenches,foundation etc.(Stones Available at site for 100 mtrs) |
| 30 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat |
| 31 | RANDOM RUBBLE MASONRY Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 32 | Frames and trussesProviding wood work in frames of doors, windows, clerestory windows and other frames & Posts, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length First class deodar wood |
| 33 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, ofrequired size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsRaj Nagar plain white marble/Udaipur green marble/zebra black marble (Area of slab over 0.5 sqm) |
| 34 | Providing and fixing name/text carving on seasoned hardwood wooden board (Deodar/Pine), including CNC/hand carving of letters/logos to approved design, smooth sanding, wood preservative treatment and application of exterior-grade weatherproof wood stain/polish, complete with all materials, labour, tools and fixing accessories |
| 35 | Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish. |
| 36 | Crriage of different materials by mechanical transport incl. head load for stacking at site @ 40KMS |
| 37 | cement |
| 38 | Aggregate |
| 39 | Timber |
| 40 | Carriage of different materials by Manual Labour including loading, unloading for a lead of 50 mtr |
| 41 | cement |
| 42 | Aggregate |
| 43 | Timber |
| 44 | 3. DEVELOPMENT OF 3D WIRE MESH FENCE |
| 45 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 46 | P/L of stone soling incl. ramming,hand packing and all carriages, complete job in room fill,trenches,foundation etc. |
| 47 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat |
| 48 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 49 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Post @ 2.5 M c/c |
| 50 | Dressing, jointing, fixing and erection of Department-supplied First Class Deodar wood/First class Budloo/Fir Wood/Kail Wood for trusses, frames, rafters, purlins, posts, wall frames and other required components, necessary labour, tools and tackles, complete as directed by the Engineer-in-Charge. The cost of timber shall be excluded, as the same shall be supplied by the Department.Dept. wood is provided as saw mill based only. |
| 51 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 52 | Providing and fixing 1.83 m high 3D welded wire mesh fencing panel, fabricated from 4 mm dia galvanized steel wire, having 50 × 200 mm mesh opening, panel size 1.83 m × 2.50 m, with 3D V-shaped reinforcing bends, including cutting, welding, galvanizing/powder coating and necessary panel fixing accessories, complete as directed by Engineer-in-Charge. |
| 53 | Providing, sawing, cutting, extraction, sizing, dressing, jointing, fixing and erection of 15 mm thick wooden planks, including all labour, tools and tackles, nails/screws and incidental works, using timber supplied free of cost by the Department, complete in all respects as directed by the Engineer-in-Charge, excluding cost of wood |
| 54 | Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12 +B41D=100 mm with tolerance of ± 2%) Zinc coated, Mesh wire diameter 3.0mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2mm, supplied @ 3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per direction of Engineer-in-charge. |
| 55 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work (Wooden Finish for 200 feet) |
| 56 | Crriage of different materials by mechanical transport incl. head load for stacking at site @ 12KMS |
| 57 | steel |
| 58 | cement |
| 59 | Aggregate |
| 60 | Carriage of different materials by Manual Labour including loading, unloading for a lead of 100 mtr |
| 61 | steel |
| 62 | cement |
| 63 | Aggregate |
| 64 | 4. DEVELOPMENT OF TREE HOUSE |
| 65 | Dressing, jointing, fixing and erection of Department-supplied First Class Deodar wood/First class Budloo/Fir Wood/Kail Wood for trusses, frames, rafters, purlins, posts, wall frames and other required components, necessary labour, tools and tackles, complete as directed by the Engineer-in-Charge. The cost of timber shall be excluded, as the same shall be supplied by the Department.Dept. wood is provided as saw mill based only. |
| 66 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 67 | P/L of stone soling incl. ramming,hand packing and all carriages, complete job in geocell,trenches,foundation etc. upto a lead of 15km |
| 68 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat |
| 69 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 70 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete |
| 71 | French spirit polishing, Two or more coats on new works including a coat of wood filler in all wood work |
| 72 | P/F HI ribcolor coated corrugated galvanizedPPGI sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalumesteel with silicon modified ployester coating ofapproved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5micron polyester back coat over 5 micron primercoats on both surfaces incld. side and end lap andusing 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area)0.50mm THICK (TATA,JSW OR EQ brand) I/C ALL CARRIAGES/H/LOAD i/c 60cm wide ridges and valleys wherever required incl. all fittings and fixtures in roof sheeting |
| 73 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately Changez Khani |
| 74 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 75 | Providing and fixing plywood made of commercial quality ISI marked plywood of 12 mm thick, conforming to IS:303, termite and borer resistant, boiling water-resistant (BWR grade), waterproof with smooth both-side finish. The plywood shall be cut, dressed, jointed, and fixed in proper alignment over the supporting framework as per approved design and directions of the Engineer-in-charge, complete in all respects |
| 76 | FRAMES Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class deodar wood |
| 77 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.First class deodar wood |
| 78 | Providing and fixing glass panes with required beading and glazing clips in doors, windows, clerestory windows, all complete with : 3mm glass panes |
| 79 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 80 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. 75mm |
| 81 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm |
| 82 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 100x10 mm |
| 83 | Providing and fixing ISI marked oxidized M.S. air hook with necessary screws equivalent |
| 84 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm |
| 85 | Providing and fixing wooden panelling 12mm thick over framming work of required pattern and design water proof strips of ply board imported wood panelling for ceiling/walling(imported wood/RAIT wood) incl ply wood framing. |
| 86 | INSULATION Providing and fixing of insulation on External walls or roofs by 100mm thick rock wool as per the specification and drawings approved. |
| 87 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm. (Windows & Doors ) |
| 88 | WOODEN FLOORING Wooden planking, tongued and grooved in flooring including fixing with iron screws complete:18 mm thick Second class teak wood |
| 89 | Carriage of different materials by Mechanical transport incl. loading, unloading and for stacking at site |
| 90 | Sand 30 km |
| 91 | steel 30 km |
| 92 | cement 30 km |
| 93 | Timber 30km |
| 94 | Aggregate 30 km |
| 95 | Carriage of different materials by Manual labour incl. loading, unloading and for a lead of 300 mtr |
| 96 | Sand 30 km |
| 97 | steel 30 km |
| 98 | cement 30 km |
| 99 | Aggregate 30 km |
| 100 | 5. CONSTRUCTION OF WOODEN BRIDGE |
| 101 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : |
| 102 | P/L of stone soling incl. ramming,hand packing and all carriages, complete job in geocell,trenches,foundation etc. |
| 103 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat |
| 104 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 105 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 106 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe-500D or more.Reinforcement @ for all rcc work |
| 107 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 108 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm. |
| 109 | RANDOM RUBBLE MASONRY Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 110 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 111 | Dressing, jointing, fixing and erection of Department-supplied First Class Deodar wood/First class Budloo/Fir Wood/Kail Wood for trusses, frames, rafters, purlins, posts, wall frames and other required components, necessary labour, tools and tackles, complete as directed by the Engineer-in-Charge. The cost of timber shall be excluded, as the same shall be supplied by the Department.Dept. wood is provided as saw mill based only. |
| 112 | Crriage of different materials by mechanical transport incl. head load for stacking at site @ 15KMS |
| 113 | steel |
| 114 | cement |
| 115 | Aggregate |
| 116 | Carriage of different materials by Manual Labour including loading, unloading for a lead of 50 mtr |
| 117 | steel |
| 118 | cement |
| 119 | Aggregate |
| 120 | 6. DEVELOPMENT OF ECO-FRIENDLY WASHROOMS |
| 121 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : |
| 122 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 123 | Supplying and filling of RBM in plinth incl. spreading, dressing,watering with all carrriage etc complete |
| 124 | P/L of stone soling incl. ramming,hand packing and all carriages, complete job in geocell,trenches,foundation etc. |
| 125 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat |
| 126 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 127 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 128 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone. Nallah |
| 129 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 130 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 131 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe-500D or more.Reinforcement @ for all rcc work |
| 132 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 133 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 134 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 135 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 136 | FRAMES Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):KD wood or equivalent. |
| 137 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.30 mm KD wood or equivalent. |
| 138 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineerin-charge :35mm KD wood or equivalent. |
| 139 | Providing and fixing glass panes with required beading and glazing clips in doors, windows, clerestory windows, all complete with : 3mm glass panes |
| 140 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 141 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. 75mm |
| 142 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm |
| 143 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 100x10 mm |
| 144 | Providing and fixing ISI marked oxidized M.S. air hook with necessary screws equivalent |
| 145 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm |
| 146 | CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) Outer walls, Inner walls,slab and floor. |
| 147 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 148 | CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 149 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 ltrs |
| 150 | VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 151 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm. |
| 152 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 153 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Budloo/Fir wood |
| 154 | Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws 1st class kail wood |
| 155 | Providing and fixing plained eaves boarding. 2nd class Deodar wood 250x32 mm (nominal size) |
| 156 | P/F HI ribcolor coated corrugated galvanizedPPGI sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalumesteel with silicon modified ployester coating ofapproved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5micron polyester back coat over 5 micron primercoats on both surfaces incld. side and end lap andusing 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area)0.5mm THICK (TATA,JSW OR EQ brand) I/C ALL CARRIAGES/H/LOAD i/c 60cm wide ridges and valleys wherever required incl. all fittings and fixtures in roof sheeting (TILE PROFILE). (Note:-1.50 is used as a slope factor for sheeting) |
| 157 | PART B-SANITARY WORKS Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 158 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 159 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 160 | Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I / C.I pipes 100 mm dia. Pipe, |
| 161 | Providing and fixing pvc pipes class c pipe incl soil waste and vent pipes a)100mm |
| 162 | b) 75 mm |
| 163 | PP-R PIPES AND FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe, 16mm OD(SDR-7.4) |
| 164 | PP-R PIPES AND FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 25mm OD(SDR-7.4) |
| 165 | Providing & Fixing PVC ( Prince Make) following fittings complete |
| 166 | Door Tee 100mm size |
| 167 | Door Tee 75mm size |
| 168 | PVC collar 100mm |
| 169 | PVC collar 75mm |
| 170 | PVC Reducer 100x75mm |
| 171 | Plain Bend 100 mm size |
| 172 | Plain Bend 75 mm size |
| 173 | Door bend 100mm |
| 174 | Door bend 75mm |
| 175 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 176 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 177 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore |
| 178 | Providing and fixing PPR Unions PPR Union 25mm |
| 179 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 180 | Crriage of different materials by mechanical transport incl. head load for stacking at site @ 35KMS |
| 181 | steel |
| 182 | cement |
| 183 | Aggregate |
| 184 | Timber |
| 185 | Bricks |
| 186 | Carriage of different materials by Manual Labour including loading, unloading for a lead of 50 mtr |
| 187 | steel |
| 188 | cement |
| 189 | Aggregate |
| 190 | Timber |
| 191 | Bricks |
| 192 | 7. DEVELOPMENT OF WATER POND WITH BRIDGE |
| 193 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 194 | P/L of stone soling incl. ramming,hand packing and all carriages, complete job in geocell,trenches,foundation etc. upto a lead of 15km |
| 195 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 196 | Neat cement punning pond sides |
| 197 | Supply & laying of HDPE polythene sheet (500 micron, UV stabilized) for lining of water holes, including edge anchoring |
| 198 | Providing, supplying, installing, testing and commissioning of 1 HP single-phase centrifugal water pump/motor set, suitable for water supply/irrigation, complete with motor, pump, base frame, starter/control panel, necessary fittings, NRV, foot valve, unions and electrical connections, complete in all respects. |
| 199 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. External work including trenching, refilling etc. PN-16 pipe , 25mm OD (SDR-7.4) |
| 200 | 8. DEVELOPMENT OF WOODEN GAZEBO (A 1 No) |
| 201 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 1 meter from cutting edge |
| 202 | P/L of stone soling incl. ramming,hand packing and all carriages, complete job in ,trenches,foundation etc. upto a lead of 15km |
| 203 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat |
| 204 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 205 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 206 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete. |
| 207 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 208 | P/F HI ribcolor coated corrugated galvanizedPPGI sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalumesteel with silicon modified ployester coating ofapproved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5micron polyester back coat over 5 micron primercoats on both surfaces incld. side and end lap andusing 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area)0.50mm THICK (TATA,JSW OR EQ brand) I/C ALL CARRIAGES/H/LOAD i/c 60cm wide ridges and valleys wherever required incl. all fittings and fixtures in roof sheeting |
| 209 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 210 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 211 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First Class Deodar wood |
| 212 | Dressing, jointing, fixing and erection of Department-supplied First Class Deodar wood/First class Budloo/Fir Wood/Kail Wood for trusses, frames, rafters, purlins, posts, wall frames and other required components, necessary labour, tools and tackles, complete as directed by the Engineer-in-Charge. The cost of timber shall be excluded, as the same shall be supplied by the Department.Dept. wood is provided as saw mill based only. |
| 213 | CEILING Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws 1st class deodar wood |
| 214 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: 13.57.1 Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 215 | KOTA STONE FLOORING Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 216 | Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish. |
| 217 | Carriage of different materials by Mechanical transport incl. loading, unloading and for stacking at site |
| 218 | Sand 30 km |
| 219 | steel 30 km |
| 220 | cement 30 km |
| 221 | Timber 30km |
| 222 | Aggregate 30 km |
| 223 | Carriage of different materials by Manual labour incl. loading, unloading and for a lead of 100 mtr |
| 224 | steel |
| 225 | cement |
| 226 | Timber |
| 227 | Aggregate |
| 228 | 9 .DEVELOPMENT OF WOODEN GAZEBO (2nd) 1 No) |
| 229 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 1 meter from cutting edge |
| 230 | P/L of stone soling incl. ramming,hand packing and all carriages, complete job in ,trenches,foundation etc. upto a lead of 15km |
| 231 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat |
| 232 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 233 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 234 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete. |
| 235 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 236 | P/F HI ribcolor coated corrugated galvanizedPPGI sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalumesteel with silicon modified ployester coating ofapproved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5micron polyester back coat over 5 micron primercoats on both surfaces incld. side and end lap andusing 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area)0.50mm THICK (TATA,JSW OR EQ brand) I/C ALL CARRIAGES/H/LOAD i/c 60cm wide ridges and valleys wherever required incl. all fittings and fixtures in roof sheeting |
| 237 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 238 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 239 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First Class Deodar wood |
| 240 | Dressing, jointing, fixing and erection of Department-supplied First Class Deodar wood/First class Budloo/Fir Wood/Kail Wood for trusses, frames, rafters, purlins, posts, wall frames and other required components, necessary labour, tools and tackles, complete as directed by the Engineer-in-Charge. The cost of timber shall be excluded, as the same shall be supplied by the Department.Dept. wood is provided as saw mill based only. |
| 241 | CEILING Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws 1st class deodar wood |
| 242 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: 13.57.1 Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 243 | KOTA STONE FLOORING Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 244 | Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish. |
| 245 | Carriage of different materials by Mechanical transport incl. loading, unloading and for stacking at site |
| 246 | Sand 30 km |
| 247 | steel 30 km |
| 248 | cement 30 km |
| 249 | Timber 30km |
| 250 | Aggregate 30 km |
| 251 | Carriage of different materials by Manual labour incl. loading, unloading and for a lead of 100 mtr |
| 252 | steel |
| 253 | cement |
| 254 | Timber |
| 255 | Aggregate |
| 256 | 10. DEVELOPMENT OF NIC |
| 257 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 25mm thick with 12.5 mm nominal size stone aggregate. |
| 258 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 259 | Providing and fixing first-class marine grade plywood with a thickness of 19 mm for internal and external wall lining work. The plywood shall have a density of 811 kg/m³ (observed value) and shall be ISI marked to ensure quality. It shall include a 20-year replacement warranty and shall have a moisture content ranging from 5-15% (criteria) with an observed value of 9.2%. The plywood shall be water-resistant, with a perpendicular to grain strength of 34.5 N/mm² (observed value), exceeding the minimum criteria of 25 N/mm². It shall also have a glue adhesion in the dry state of at least 1350 and resistance to water with an observed value of 1233, surpassing the minimum required 1000. The parallel to grain strength shall be a minimum of 40, and the plywood type shall meet the criteria with observed values for various properties, ensuring durability and performance. The rate shall include nails or required gluing work and carriage up to the site of work |
| 260 | Providing and fixing plywood made of commercial quality ISI marked plywood of 12 mm thick, conforming to IS:303, termite and borer resistant, boiling water-resistant (BWR grade), waterproof with smooth both-side finish. The plywood shall be cut, dressed, jointed, and fixed in proper alignment over the supporting framework as per approved design and directions of the Engineer-in-charge, complete in all respects |
| 261 | Providing and fixing 5 mm thick clear toughened glass shelves with machine-polished edges, including cutting, polishing, drilling, SS shelf brackets/holders and all accessories, complete |
| 262 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:13.57.1 Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 263 | Providing and fixing premium quality natural Teak veneer (minimum 0.6 mm thick) over plywood surfaces, including preparation of surface, application of approved adhesive (Fevicol SH or equivalent), edge lipping, necessary pressing, sanding, polishing/melamine finish, and all required materials, tools, labour, fittings, and accessories complete to achieve a smooth and uniform finished surface as approved by the Engineer-inCharge. |
| 264 | Providing and fixing PVC edge beading/profile of approved make and colour, size suitable for panel/shelf edges, including cutting, mitring, adhesive/fixing and all necessary accessories, complete. |
| 265 | VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 266 | Carriage of different materials by Mechanical transport incl. loading, unloading and for stacking at site |
| 267 | Sand 30 km |
| 268 | cement 30 km |
| 269 | Aggregate 30 km |
| 270 | Carriage of different materials by Manual labour incl. loading, unloading and for a lead of 300 mtr |
| 271 | cement |
| 272 | Aggregate |
| 273 | 11. DEVELOPMENT OF SELFIE POINT AT DEDIKOOT |
| 274 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil 1 meter from cutting edge |
| 275 | P/L of stone soling incl. ramming,hand packing and all carriages, complete job in geocell,trenches,foundation etc. |
| 276 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat |
| 277 | RANDOM RUBBLE MASONRY Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 278 | Frames and trusses Providing wood work in frames of doors, windows, clerestory windows and other frames & Posts, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length First class deodar wood |
| 279 | Providing and fixing name/text carving on seasoned hardwood wooden board (Deodar/Pine), including CNC/hand carving of letters/logos to approved design, smooth sanding, wood preservative treatment and application of exterior-grade weatherproof wood stain/polish, complete with all materials, labour, tools and fixing accessories |
| 280 | Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish. |
| 281 | Crriage of different materials by mechanical transport incl. head load for stacking at site @ 40KMS |
| 282 | cement |
| 283 | Aggregate |
| 284 | Timber |
| 285 | Carriage of different materials by Manual Labour including loading, unloading for a lead of 50 mtr |
| 286 | cement |
| 287 | Aggregate |
| 288 | Timber Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender