Tender For Construction Of Model Ration Ghat By Brick Walling, Marble Tiling At Koolipora Khanyar .(Adv. Cost Rs. 14.46. Lacs) (Incl Cost Of Material+Gst)
Tender Value
14.46 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
0 days left
EMD
28920
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Model Ration Ghat By Brick Walling, Marble Tiling At Koolipora Khanyar .(Adv. Cost Rs. 14.46. Lacs) (Incl Cost Of Material+Gst)
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet |
| 3 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 4 | Providing and laying stone soling hand packed under foundations , footings , plinth etc including watering , ramming /compaction all complete as per EIC .( in vogue ) |
| 5 | P/L in postion specified grade cement concrete excl. the cost of centering and shuttering 1:4:8(1 cement 4 coarse sand 8 graded stone crushed 40mm nominal size) |
| 6 | providing and laying positon specified grade of reinforecement cement concrete including curing but excl the cost of centring and shuttring , finishing and reinforcement . All works complete upto plinth level in 1:1.5:3 ( 1 cement 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:4.4.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 8 | Steel reinforcement for RCC work including straightening , cutting , bending , placing in position and binding all complete upto plinth level . Thermo- mechanically treated bars of grade Fe-500 D or more . |
| 9 | Centering and shuttering including strutting , proping etc and removal of form for foundations , footings , bases of coloumns etc for mass concrete . |
| 10 | Providing and laying , watering and compacting nalla muck GSB with aggregate size not exceeding 90 mm granular sub base to specified lines x sec and density furnished work to be measured incl. all carriages . |
| 11 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.3 50 mm thick with 20mm nominal size stone aggregate. |
| 12 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 13 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 14 | 15 mm thick cement plaster on the rough side of single or half brick walls of mix (1:6 1 cement , 6 fine sand ) |
| 15 | Providing and applying 2mm wall putty on walls of approved quality including cost of scaffolding and material complete. |
| 16 | Finishing walls with acrylic smooth exterior paint of required shade on new work (two or more coats applied @1.67 l/10 sqm over and applied including primer coat of exterior primer applied @2.2 kg/10 sqm |
| 17 | Lighting point 1 lighting point includes wiring of lightening point in 1.5 sqm mm pvc insulated copper wire and 2.5 sqmm pvc insulated multi standard copper wire 6 A one way switch S pole MCB , 10 A tp MCB 2 way 2 way DB mcb and hylum sheet with 16/15 watt led surface light including cost of channels as per requirement 1 point controlled by 6A switch including placing and fixing in position 25 mm pvc conduit pipes with necessary bend ss and other fittings in RCC work ( in vogue ) |
| 18 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 19 | Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. |
| 20 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete . First class Budloo/Fir wood |
| 21 | Providing and fixing color coated Hi Rib 0.50 mm designated sheet roofing (including ridges, valleys and hips ) fixed with self driven screws of required size including epocy seal overlapping of sheets complete (upto pitch of 60 degrees) excluding the cost of purlins rafters and trusses . |
| 22 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): 9.1.5 First class kail wood |
| 23 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 9.6.5 Second kail wood 30 mmExtra for providing ISI marked Anodized Aluminium butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws |
| 24 | Providing and fixing3.5 mm thick glass panes including beading nails and cost of carriage |
| 25 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 26 | Providing and fixing hardware fittings of approved brand and of required type as approved by EIC complete as per the specifications (Anodised Aluminium fittings )Tower bolt 100 mm |
| 27 | Tower bolt 150 mm |
| 28 | Handle 125 mm |
| 29 | handle 150 mm |
| 30 | 150 mm hook and eyes |
| 31 | Al drop |
| 32 | Providing and fixing marble counter including brick masonry supports/stands in cement mortar(1:6) with 18-20 mm thick marble slab of approved quality and shade laid over cement mortar bed , inluding brick masonry stands of required size and height , cement plastering to exposed surfaces , necessary cutting ,dressing,levelling ,jointing and polishing of marble edges , all complete as per directions of EIC. |
| 33 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 34 | Carriage Bricks 15km |
| 35 | Sand 15 km |
| 36 | Aggregate 15 km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender