Tender For Repair And Maintenance To Otm Building Under Age B/R-I At Ima.
Tender Value
35 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
20 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair And Maintenance To Otm Building Under Age B/R-I At Ima.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Rendering 15 mm thick in CM 1:4 , on brick or concrete surface with cement mortar mixed with WPC as per manufacturers instructions, surfaces finished even and fair without using extra cement complete including taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water all as specified and directed. ( Note :- WPC shall be paid separately if directed) |
| 2 | M&L for Rendering 10 mm thick in CM 1:6 on brick or concrete surface with cement mortar finished even and fair without using extra cement complete including taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water all as specified and directed. |
| 3 | M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed. |
| 4 | M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:4) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed. |
| 5 | M&L for Brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius built in CM (1:4) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed. |
| 6 | M&L for Rendering 10 mm thick in CM 1:6 on brick or concrete surface with cement mortar finished even and fair without using extra cement complete all as specified and directed. |
| 7 | M&L for Rendering 15 mm thick in CM 1:4 on new brick or concrete surface with cement mortar mixed with WPC as per manufacturers instructions, surfaces finished even and smooth without using extra cement complete all as specified and directed. ( Note :- WPC shall be paid separately if directed) |
| 8 | Supply only liquid water proofing compound complete all as specified & directed. |
| 9 | M&L for PCC 1:2:4, type B-1, using 20 mm graded crussed stone aggregate as in coping, benching, for fixing hold fasts etc similar work, using necessary form work complete all as specified. |
| 10 | M&L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed. |
| 11 | Use and waste formwork to sides and soffits of shelves, lintels & similar work, rough finished flat surface of concrete complete all as directed. |
| 12 | S&F TMT steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as directed. |
| 13 | M&L for RCC 1:2:4, type B1, using 20mm graded stone aggregate, as in shelves, beams, lintel etc, complete all as directed. |
| 14 | M&L for Glazed ceramic coloued tiles size 450mm X 300mm X 5-6mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in colour tile grout including 10 mm thick rendering in ready mix cement mortar, finished the surface rough to receive tiles including dismantling of existing wall tiling including cement mortar bedding ( but not backing) and rubbish off the premises complete all as directed. |
| 15 | M&L Coloured dark shade double charged Vitrified tiles 9 to 10 mm thick premium quality of group BI(a) (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over and incl 15 mm thick cement mortor in cm 1:6 and pointed in white or coloured cement to match the shade of existing surfaces including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. Note : The contractor shall have no claim on difference what so ever on shade/colour of tile. |
| 16 | All as per item No. 15 here in above, but as in vertical surfaces over and incl 10 mm thich backing coat CM 1:4 complete all as specified and directed. |
| 17 | M&L for Non skid ceramic coloured tiles 6 to 7mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in coloured tile grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 18 | M&L for 25mm thick plain cement concrete 1:2:4 , type B-0 (using 12.50mm graded crussed stone aggregate) as levelling course in sub floors below tile etc complete all as specified and directed. |
| 19 | M & L for filling of groove/ joints of marble tiles in existing floors with epoxy grout as per shade of Marble tile, 5 to 6 mm wide and 10mm deep, filled upto 6 mm depth only and kept 4mm empty from top of floor for design including raking out joints, removing old filling material, cleaning the joints and finishing after filling complete all as specified and directed. |
| 20 | M & L for 16 to 18 mm quartz stone flooring approved quality colour and shade set in 15mm thick cement mortar 1:6 including pointing in coloured tile grout to match with the shade of marble stone and dimantling of old marble stones and screed bed complete all as specified and directed. |
| 21 | M & L for 16 to 18 mm thick Udaipur green marble stone as in flooring, steps and like set in 15mm thick cement mortar 1:6 including pointing in coloured tile grout to match with the shade of marble stone incl rounding off exposed edges of marble stone and dimantling of old marble stones and screed bed complete all as specified and directed. |
| 22 | M & L for 16 to 18 mm thick Udaipur green marble stone tile, area of each tile not exceeding 0.36 Sqm, laid in flooring in patches not exc.3 Sqm each patch, set in 15mm thick cement mortar 1:6 including making of grooved joints as per existing pattern & filling the joints with epoxy grout as per shade of Marble tiles including rounding off exposed edges of marble and demolition of old marbles tiles with screed bedding mortar, complete all as specified and directed. |
| 23 | M & L for 16 to 18 mm thick white marble stone slabs in border on floors or in patches not exc 3 sqm each patch, laid in flooring, steps and like, set in 15mm thick cement mortar 1:6 including making of grooved joints as per existing pattern & filling the joints with epoxy grout as per shade of Marble tiles including rounding off exposed edges of marble and dismantling of old marbles tiles with screed bedding mortar, complete all as specified and directed. |
| 24 | M & L for 16 to 18 mm thick wonder marble stone laid in flooring or steps and like, laid on 15mm thick screed bed in cement mortar 1:6, including pointing in colour tile grout mixed with admixture of pigment to match the shade of stone and dismanlting of old marble/tile including screed bed complete all as specified and directed. |
| 25 | M & L for Granite stone of any colour (of any type) 20mm thick machine cut (table rubbed & polished), as in floors, cooking platforms and like bedded with and including 20 mm thick screed bed in CM (1:4) and jointed with grey cement slurry, and pointed with white with admixture of pigment to match with shade of granite stone including dismantling of existing stone slabs including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 26 | Providing edge moulding to 18-20 mm thick marbal/granite of counterers vanities etc incl machine polished to edges to give high finish complete all as directed. |
| 27 | Material & lobour for prepolished marble slab 18-20mm thick of any colour (of any type) matching with existing colour of marble slab including 15mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade marble, including moulding / rounding of exposed edge of slab & removal of debrish from site, including dismantling carefully and taken out cracked or broken marble slabs in floors or in steps area not exc. 0.50 sqm ecah patch complete all as directed. |
| 28 | M&L for cutting and grinding of existing terrazzo floor/ marble floor/ Kota stone floor surfaces/ wonder marbal floor (3 cut) on horizontal & vertical surface and finally finishing the surfacesto mirror finish uniformally by applying floor polish to entire satisfication of Engr-in-Charge, complete all as directed. |
| 29 | M&L for PCC 1:4:8, type D-2, using 40 mm graded crussed stone aggregates as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed |
| 30 | M&L for Rubberised polished precast coloured cement concrete glossy finished Interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. |
| 31 | M&L for Rubberised polished precast coloured cement concrete glossy finished Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-30 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. |
| 32 | M&L for dismantling precast coloured concrete Interlocking paver blocks any shape and size and refixing over & including 30 mm thick sand cushioning layer complete, all as specified and directed. |
| 33 | M&L for Rubberised polished Glossy finish, chequered cement concrete coloured tiles 30 cm X 30cm X 25 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement & pigment to match the surface of tiles over & including 15 mm thick screed bed in CM 1:6 complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. |
| 34 | S&F 8 mm thick clear toughened glass shelves of approved make cut to required size and shap with all edges machine ground and polished supported on SS 304 gde adjustable shelf support /brackets/pins securely fixed to side/ back of the show case |
| 35 | S&F aluminium powder coated door fixed on aluminium frame of section 47.62mm x 44.45mmx1.6 mm thick, shutter glazed with tinted glass (Modi Guard) 5mm thick fixed with rubber gasket and aluminium strips as per standard method also rubber gasket at frame so as to make air tight with cast type handle aluminium anodised of 150mm size 2 Nos (One on each side of shutter) with shutter bottom rail 150mm x 44.45mm x1.6mm thick section, middle and top rail 83.5mm x 44.45mm x 1.6 mm thick section, side style 83.5mm x 44.45mm x 1.6 mm thick section all as sper IS 737- 1986 fixed with aluminium (extruded section) hydraulic door closer egulated designation No-3 universal type and make with aluminium tower bolt arrangement of standard make with locking arrangement with 6 levers mortise lock(brass body) of size 100mm etc complete all as specified and as directed. |
| 36 | Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventillators, and partition (fixed portions) with extruded built up standard tubulr sections/ appropriate Z sections and other section of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of reqd dia and size, included necessary filling up the gaps at junction, ie. at top, bottom and sides with reqd EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechnically wherever reqd including cleat angle, aluminium snap beading for glazing/ panelling,CP. brass/ stainless steel screws, all complete as per architectural drg and the direction of engineer-in- charge |
| 37 | Supply and fix 5.0 mm thick figured Sheet glass, selected quality and glazing with ruber gsket and aluminium beads in square/ rectngular area exc 0.5 sq.m in each pane complete all as specified and as directed |
| 38 | M&L for 9mm thick plywood grade BWR, type BB, fixed with screws to frame work as in wall panelling complete all as specified and as directed. |
| 39 | M&L for 4mm thick Veneered decorative plywood grade 1 (with BWR resin) with decorative face veneers on one face incl two coats of wood polish ,fixed with nails to timber frame work complete all as specified and as directed. |
| 40 | M&L 2nd clss hard wood clean swan battens exc 15 & nexc 25 Sqcm at 15 cm centres both way complete all as specified and as directed. |
| 41 | M&L 1st class soft wood rectangular or triangular wrought timber fillets, bullnosed, spalyed, chamfered or rounded on one edge or face not exc. 3 Sqcm fixed with nails complete all as specified and as directed. |
| 42 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed. |
| 43 | S&F 1st class hard wood (Teak wood) Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed. |
| 44 | S&F 40 mm thick 1st class H.W. ( Teak wood) glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc(with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut aand mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed. |
| 45 | M&L for first class hard wood (Teak wood) plain fillets, section exc 3 Sq cm & n. exc 6 Sq cm, square, rectangular or triangular in section, wrought, secured with nails or brads, fixed in repair complete all as specified & directed. |
| 46 | S&F, Stainless steel butt hinge 100mm long of approved make (ISI Marked) and best quality fixed with SS screws, complete all as directed |
| 47 | S&F, 300 mm long brass fency type handle of approved (ISI Marked) and best quality fixed with brass crews as directed. |
| 48 | S&F, brass tower bolt 300 mm long of approved make (ISI Marked) and best quality fixed with brass screws, complete all as specified and directed. |
| 49 | S&F, 300 mm long brass sliding door bolt with hasp staple (bolt type) and fixing with Snut bolt or screws (ISI Marked), complete all as specified and directed. |
| 50 | S&F, Door stopper of brass body and tongue, with hard drawn steel spring and rubber bush, fixed on bottom rail of door, complete all as specified and directed |
| 51 | S&F, in repair, Aluminium body door closer hydraulically regulated designation no 3 universal type, (ISI Marked), suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80Kg complete all as directed. |
| 52 | S&F, 4mm thick E-board (classic) tile fixed on Galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1:6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable \\"J\\" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing grid of any type, thickness including cover fillets etc complete all as directed. |
| 53 | S&F, 4mm thick E-board (classic) tile size 600mmx600mm as in ceiling fixed on existing grid including straightening the grid and taking down carefully old board complete all as specified & directed. |
| 54 | Providing & fixing false ceiling in repair at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications and upto 12 m height with arrangement of scaffolding, drawing and as per directions of the Engineer-in-Charge. With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. |
| 55 | M&L for providing and fixing 25 to 30mm thick plaster of Paris ceiling/wall POP designer frame ( gypsum anhydrous) to flat surface over metal frame work and reinforced ,with G.I. wire mesh and fillets any sunk or raised moulding completed all as specified and directed. |
| 56 | All as per item No. 55 here in above but to curved surface completed all as specified and directed. |
| 57 | All as per item No. 55 here in above but to without grid completed all as specified and directed. |
| 58 | S&F, Looking mirror 5.00mm thick area exc. 1.00 Sqm & not exc. 1.50 Sqm, bevelled edge of selected quality glass mounted on 6mm thick commercial plywood or PVC board and fixed on wall with chromium plated hanging clips, screw & washers and surrounded with teak wood beading not exceeding 6 SqCm in section including polishing of beading including taking down existing unserviceable mirror, removing from site premises, complete all as directed. |
| 59 | M & L for Preparation of new plastered surfaces of wall and applying two coats of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger)) complete all as directed. |
| 60 | M & L for Preparation of puttied/ new plastered surfaces of wall / ceiling and applying two coats of Oil bound distemper over a coat of primer complete all as specified and directed. . |
| 61 | Complete removing of existing treatment from wall / ceilling complete all as specified and directed. (work to be carried upto a height of 10m high) |
| 62 | M & L for Preparation of scrapped or new plastered surface of wall / ceiling and applying 2.0 mm thick damp proof wall care putty in two coats as per manufacturer instruction complete all as specified and directed. (work to be carried upto a height of 10m). |
| 63 | M & L for Preparation of scrapped or new plastered surface of wall / ceiling and applying 2.0 mm thick wall care putty in two coats as per manufacturer instruction complete all as specified and directed. (work to be carried upto a height of 10m). |
| 64 | M & L for Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed |
| 65 | M & L for Preparation of old treated plastered surfaces and applying two coats of oil emulsion distemper complete all as specified. Note :Rate shall be inclusive of scafolding and for working other arrangement upto 25m height. |
| 66 | M & L for Preparation of old treated plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on ceiling, complete all as specified and directed |
| 67 | M & L for Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on walls complete all as specified and directed |
| 68 | M & L for Preparation of old coloured concrete tiles, paver block, floor tiles of any description, cleaning with wire brushes, removing all dust & dirt from surfaces, washing with water and applying one one coat of exterior emulsion/ floor paint, complete all as directed. |
| 69 | M&L for preparation of existing old surface of any type and apply one coat of weather coat exterior emulsion on vertical as well as horizontal surface inlcuding brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorecence salts, trading oil, greasy spots vegitation, green fungus etc completed all as per manufacturer instruction. Note : Rate for working shall be inclusive of scafolding and other arrangement upto 25m height. |
| 70 | M&L for preparation of existing treatment and and applying two coats of weather coat exterior emulsion on vertical as well as horizontal surface over and incl waterproof wall cre putty inlcuding brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorecence salts, trading oil, greasy spots vegitation, green fungus etc completed all as per manufacturer instruction. Note :Rate for working shall be inclusive of scafolding and other arrangement upto 25m height. |
| 71 | M&L applying a coat of Texture paint of any colour/shed including complete removal of old coating as per manufacture instruction complete all as specified. Make & Shade shall be approved by GE. |
| 72 | M&L for preparation of existing old surface and one coat of plastic emulsion (light / dark shed) on wall complete upto to the height 15m complete all as per manufacturer instruction and directed by Engr in Charge. Note :-Rate shall be inclusive of scafolding and other arrangement to reach height). |
| 73 | M & L for Preparation of old painted steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed |
| 74 | M&L french polishing on wooden surface of any discription width or girth including cleaning and preparing the surface including a coat of wood filler but one or more coat on old work incl complete removal of exiting paint complete all as specified and directed. |
| 75 | M&L french polishing on wooden surface of any discription width or girth including cleaning and preparing the surface including a coat of wood filler but one or more coat on new work incl complete removal of exiting paint complete all as specified and directed. |
| 76 | M&L preparation of old polished wooden surfaces of any description over 10cm width or girthincluding cleaning and preparing the surface including a coat of wood filler but one or more coat of of manson polish on old work incl complete removal of exiting paint complete all as specified and directed. |
| 77 | M & L for Preparation of old painted wooden surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed |
| 78 | M&L for preparation old metal sheet roof of any height by removing mildew, dirt and any loose flaps of old paint on roof surface and apply one coat of synthetic enamel paint by mechanical means of machine spray Complete all as per manufacturer Instruction and directed by Engr in Charge. Note : Rate for working shall be inclusive of scafolding and other arrangement upto 25m height. |
| 79 | M&L for Preparation of plastered or scrapped surfaces of wall or ceiling by making free from dampness, oil or any loosely held particles, filling cracks if any with crack seal and applying a coat of Dampstop Advanced of Berger or equivalenet of Sika/ Asian Paint/ Fosroc on saturated dry surface of wall as per manufacturer instruction complete all as specified and directed. Note : Work will be carried out upto a height of triple storied buildings. |
| 80 | M & L for Removing /uprooting, shrubs, trees, vegetation growth & weeds from the RCC Chajja, roof slabs and around PVC tanks etc,throughly saturating the affected area with herbicides, making good the damaged / broken portion with cement mortar in cm 1:4 finishing the surface fair and even and cleaning including a coat of bituminious primer and hot bitumen in patches area not exceeding 1.00 Sqm each complete all as directed. |
| 81 | Dismantling of existing roof sheet / wall cladding and refix the same with self taping screws all as specified. |
| 82 | S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified. |
| 83 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, soft/loose soil complete all as specified and as directed. |
| 84 | M &L for Plain cement concrete in foundation filling type B-2 1:2:4 (40mm graded aggregate) and mass concrete complete all as specified and as directed. |
| 85 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc conforming to IS 1161-1979 grade Fe 410-W (Gde- E- 250) quality complete all as specified and directed. |
| 86 | M&L for Steel work in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to I. S.1161- 1979 grade St.-240 etc conforming to IS 1161-1979 grade Fe 410-W (Gde- E- 250) quality complete all as specified and directed. |
| 87 | S & F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment grade Fe 410-W (Gde- E- 250) A quality complete all as specified and directed. |
| 88 | S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, and similar work complete all as specified and directed |
| 89 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint complete all as specified and directed. |
| 90 | S & F Mild steel sheet eaves gutters 1.25mm thick 150mm dia, galvanised class 3, half round with rounded edges etc complete all as specified and directed. |
| 91 | M&L, for PCC 1:2:4 , type B0 ( using 12.5mm graded crushed stone aggregates) as in roof padding, laid in proper slope and finished fair and even, complete all as specified and directed. |
| 92 | M&L for Providing 20mm thick plaster in ready mix plastering over roof mixed with (Water proofing compound) (Liquid) as per manufacturers instructions including brushing neat cement slurry @ 3 Kg/Sqm over Old RCC roof including taking down existing plaster on roof complete all as specified and as directed. Note : Water proofing compound (liquid) shall be measured and paid seperately. |
| 93 | M&L, for roof treatment through manufacturer /authorized applicator of the manufacturer as approved by GE by applying a coat of Cold applied bituminous oil based primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen VG- 30 grade @ 1.00 Kg/Sqm after a interval of minimum 8 hours of priming and layilg of APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) with torch application method after a interval of minimum 8 hoursof hot bitumen coating by authorised applicator of manufacturer of IWL/STP/Texas India/ Hydrotech Ltd/Sikka, laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab, cleaning off all foreign matter by wire brushing, cleaning off surface with water and removal of spoil etc including removal of debris from site beyond defence land,complete all as specified nand directed. Note :- 1. Work shall be carried out as per manufacturer's instructions by authorised applicator as approved. 2. Work shall be executed upto triple storied building. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender