Tender For Additional / Alteration Of Building Sp-15 At Sukna Mil Station Under Ge Sukna
Tender Value
4.68 Crore
Estimated cost
Bid Submission
23 Oct 2026
27 days left
EMD
5.43 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Additional / Alteration Of Building Sp-15 At Sukna Mil Station Under Ge Sukna
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches n exc 1.5 m wide & n exc 1.5 mtr in depth for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. not exc 10 sq m on plan getting out in soft and loose type of soil complete all as specified and directed. |
| 2 | Excavating in post holes or similar holes n exc. 0.5 Cum in any type of soil, getting out, returning filling in, ramming earth or broken rubble mixed with earth around, in layers n exc, 250 mm , watering, and removing surplus soil to a distance n exc. 50 m and making good surface, complete all as specified and as directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and exc 1.5 m in depth but n exc 3.0 m in depth for foundations, for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and as directed. |
| 4 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm thick in soft/loose soil, complete all as specified and as directed. |
| 5 | Removing excavated soils to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and as directed. |
| 6 | Material & labour for PCC type C2 1:4:8 using 40mm graded aggregate as in foundations filling and mass concrete or similar work complete all as specified and as directed. |
| 7 | Material & labour for Brickwork with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6,complete all as specified and directed. |
| 8 | Material & labour for RCC Nominal Mix using 20 mm graded stone aggregate type A1 1:1.5:3 as in beam, cantilevers, lintels over 1.5 m span, Shelves and like similar places, complete all as specified and directed. |
| 9 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished surface of concrete. |
| 10 | Supply and fixing of Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 11 | Supply and fixing of Mild steel TMT bars 5mm dia and over and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed. |
| 12 | Material & labour for 100 mm thick PCC 1:4:8 type D2 using (40 mm graded aggregate) as in as in sub base complete all as specified and as directed. |
| 13 | Material & labour for Cement Concrete 1:2:4 type B-0 (12.50 mm Graded Stone Aggregate) 25 mm thick as in Flooring, etc, finished concrete surfaces even and rough to receive cement screed, complete all as specified and as directed. |
| 14 | Material & labour for light shade, polished vitrified ceramic tiles 10 mm thick (square/rectangular), area of each tiles exceeding 0.42 Sqm but n.exc 1.00 Sqm in floors etc, set and jointed in neat cement slurry and laid over screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6) and pointed in white or coloured cement to match the colour of tile, complete all as specified and as directed. |
| 15 | Material & labour for light shade, polished vitrified ceramic tiles 10 mm thick (square/rectangular) , area of each tiles exceeding 0.42 Sqm but n.exc 1.00 Sqm in vertical surface in skirting etc, set and jointed in neat cement slurry and including 10 mm thick backing coat in Cement Mortar (1:3) and pointed in white or coloured cement to match the colour of tile finished fair and even, complete all as specified and as directed. |
| 16 | Material & labour for non skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 Sqm but n.exc 0.18 Sqm as in floor, etc and jointed in neat cement slurry and laid over screed bed or bedding layer of mortar 20 mm thick in cement mortar and pointed in white or coloured cement to match the colour of the tile complete all as specified and as directed |
| 17 | Material & labour for Coloured glazed ceramic tiles 450X 300X 7mm thick as in dado, set and jointed in neat cement slurry and including 10 mm thick backing with cement mortar (1:3) and pointed in white or coloured cement to match the colour of the tile finished fair & even, complete all as specified and as directed. |
| 18 | Material and labour for burnt brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:6) complete all as specified and as directed. |
| 19 | Material & labour for RCC, type B1 (1:2:4) (20 mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed. |
| 20 | Material & Labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) for rough finished surface of concrete, complete all as specified and as directed. |
| 21 | Material & labour for 20 mm thick Granite (any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed. |
| 22 | Material & labour for 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed |
| 23 | Material & labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situation complete all as specified and as directed. |
| 24 | Supply and fixing of 10 mm thick solid PVC insulation panels placed in false ceiling, fixed with screws in ceiling over, including GI grid frame work for seamless ceiling & G.I. Hangers of 6 mm dia. (upto 1200mm length) with adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat of 40 x 3 mm size & 60mm long and expansion hold fasteners of 12.5mm dia. & 40mm long and fixing at site complete as all specified and as directed |
| 25 | Supply and fixing of 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement including GI grid frame work for seamless ceiling and fixing at site complete as all specified and as directed. |
| 26 | Supply and fixing of 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame complete as all specified and as directed. |
| 27 | Material & labour for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement in CM (1:6) complete as all specified and as directed. |
| 28 | Material & labour for applying two coats of Oil bound distemper to newly plastered wall over a coat of primer over putty of 1 mm thickness including preparation of newly plastered wall surfaces, Chalk whiting on plastered surfaces prepatory to distempering, complete as all specified and as directed. |
| 29 | Supply and fixing of factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension and comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and as directed. (Glass or wire mesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 30 | Supply and fixing of factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames shall be reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as directed |
| 31 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and as directed. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 32 | Supply and fixing of 4.00 mm thick glass incl tinted/dark film/ heat absorbing glass of any size each pane complete fixed to UPVC / aluminium frame work including rubber beading complete all as specified and as directed. |
| 33 | Supply and fixing 5.00 mm thick glass incl tinted/dark film/ heat absorbing glass of any size each pane complete fixed to UPVC / aluminium frame work including rubber beading complete all as specified and as directed. |
| 34 | Supply and fixing of 4 mm thick frosted/ pin headed sheet glass, complete all as specified by the manufacturer and as directed. |
| 35 | Supply and fixing of Stainless steel wire cloth having nominal diameter of wire as 0.36 mm and average width of aperture as 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed. |
| 36 | Supply and fixing of floor door stopper of brass body and tongues with hard drawn steel spring and overall length cover plate 150mm, complete all as specified and directed |
| 37 | Supply and fixing of hydraulically regulated Door closer , designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width of aluminium (Die cast) body, complete all as specified and as directed |
| 38 | Supply & fix of mild steel curtain harrison rails, chromium plated with fixing brackets, stops, rollers etc. and with two nos of socket ,end caps and brackets (decorative type) complete for doors/window opening, complete all as specified and as directed |
| 39 | Material & labour for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165,complete all as specified and as directed. |
| 40 | Material & labour for new or previously untreated Steel surface and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome over 10 cm in width or girth, complete all as specified and as directed. |
| 41 | Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Depository windows & other Frames/ Chowkhat of size 50 X 100 mm comprising virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length ,complete all as specified and as directed. |
| 42 | Material & labour for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work with teak wood beading at the edges, complete all as specified and as directed. |
| 43 | Supply and fixing of mild steel continuous (piano) hinges, 30 mm width of flaps, bright finish or electrogalvanized complete all as specified and as directed. |
| 44 | Material & labour for 2nd class hard wood plain fillets rectangular in section, wrought, fixed with nails exc 6 sqcm but n.exc 13 sqcm complete all as specified and as directed. |
| 45 | Supply and fixing of ball catches with 8 mm diameter steel ball magnet catches for cupboard shutter including striking plate as approved etc complete all as specified and as directed |
| 46 | Supply and fixing of fabricated type extruded aluminium anodised alloy handles 100mm long, complete all as specified and as directed. |
| 47 | Supply and fixing of Aluminium anodised barrel tower bolts of extruded section 125 mm long and fixed with screws, complete all as specified and as directed. |
| 48 | Supply and fixing of 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed |
| 49 | Supply and fixing of GI tubes, medium grade, with all fittings, and fixed complete to walls and ceiling or laid in floor, in pipe 15mm bore, complete all as specified and as directed. |
| 50 | Material & labour for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth, complete all as specified and as directed. |
| 51 | Supply and fixing of GI tubes, medium grade with all fitting, and fixed complete to walls and ceiling or laid in floor, in pipe 20mm bore, complete all as specified and as directed.. |
| 52 | Supply and fixing of brass chromium plated bib tap, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed bolt ends, for iron pipe 15mm bore complete all as specified and as directed. |
| 53 | Supply and fixing of Towel Ring, CP, fixed with and including Chromium-plated brass screws and wooden/plastic cleats, complete all as specified and as directed.. |
| 54 | Supply and fixing of Soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and as directed |
| 55 | Supply and fixing of towel rack, chromium plated, size 600mm with chromium plate bracket guard, complete all as specified and as directed.. |
| 56 | Supply and fixing of swivel shower of brass, chromium plated, with long head for fixing with 15 mm pipe. |
| 57 | Supply and fixing of sheet glass self assembly consisting of 5.5mm thick sheet glass shelf,12cm wide with chromium plated bracket guard and railing, 60cm long, complete all as specified and as directed. |
| 58 | Supply and fixing of 15 mm bore bib taps, two way, chromium plated, fancy type, cast copper alloy with single handle and wall flange, screwed for iron pipe or for brass ferrule & fixed, complete all as specified and as directed |
| 59 | Supply and fixing of rimless single piece Water Closet with UF of size 380x670x765 mm soft close slim seat cover, hinges, Dual Flush Cistern Fitting, fixing accessories and accessories set, S Trap- 300 mm, complete all as specified and as directed. |
| 60 | Supply and fixing of chromium plated Angular stop cock, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed bolt ends for iron pipe 15mm bore complete all as specified and as directed |
| 61 | Supply and fixing of Table Top Basin of Size 700 x 435 x 135mm, fixing accessories and accessories Set, complete all as specified and as directed. |
| 62 | Supply and fixing of single lever basin mixer, tall height, chromium plated, for mixing hot and cold water complete all as specified and as directed. |
| 63 | Supply and fixing of mild steel Health faucet (ABS Body), chromium plated, suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed. |
| 64 | Supply and fixing of 600mx450 mm levelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial ply wood and fixed to wooden plugs with CP brass screw and cup washer, complete all as specified and as directed. |
| 65 | Supply and fixing of PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed. |
| 66 | Supply & fixing of Rotational moulded polythene water storage tanks (cylindrical vertical with top) of 1000 ltrs capacity, hoisted and fixed in position, including float valve, complete all as specified and as directed. |
| 67 | Supply and fixing of Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe, complete all as specified and as directed. |
| 68 | Supply and fixing of 3 in 1 wall mixer included provision of overhead shower and hand shower, chromium plated, for mixing hot and cold water complete all as specified and as directed. |
| 69 | Supply and fixing of 95mm Hand Shower, Round Shape, Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System and flexible connecting pipe complete all as specified and as directed. |
| 70 | Supply and fixing of Toilet paper holder with flap guard, chromium plated with bracket guard complete all as specified and as directed. |
| 71 | Supply and fixing of Tumbler holder, chromium plated with bracket guard complete all as specified and as directed. |
| 72 | Supply and fixing of corner glass shelf assembly consisting of 5.5 mm thick sheet, glass shelf, and side not less than 225 mm with chromium plate bracket guard complete all as specified and as directed. |
| 73 | Supply and fixing of 12mm toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified and as directed. |
| 74 | Supply and fixing of 110 mm bore PVC (SWR) pipes single socketed, in any length, with rubber ring joints, laid in trenches or floors, complete all as specified and as directed. |
| 75 | Supply and fixing of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors, complete all as specified and as directed. |
| 76 | Supply and fixing of PVC bends 110 mm bore, complete all as specified and as directed. |
| 77 | Supply and fixing of PVC bends 75 mm bore, complete all as specified and as directed. |
| 78 | Supply and fixing of PVC (SWR) junction single,(single t), equal or unequal in pipe of bore 110mm with access door, complete all as specified and as directed. |
| 79 | Supply and fixing of PVC (SWR) junction single,( single t),equal or unequal in pipe of bore 75 mm with access door, complete all as specified and directed. |
| 80 | Supply and fixing of PVC cowls 110 mm bore, complete all as specified and directed. |
| 81 | Supply and fixing of PVC cowls 75 mm bore, complete all as specified and directed. |
| 82 | Supply and fixing of stack clamp for 100 mm bore pipe out of 50mm x 5 mm flat iron and 16 mm dia round iron stay including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed. |
| 83 | Supply and fixing of stack clamp for 75 mm bore pipe out of 50mm x 5 mm flat iron and 16 mm dia round iron stay including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed. |
| 84 | Material & labour for 75 mm diameter outlet PVC(SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed. |
| 85 | Material & labour for rendering 15 mm thick cement plaster on fair faces of brick work or concrete sur-faces in cement mortar (1:4) using water proofing compound as per manufacturer instruction, and to be finished even and smooth (without using extra cement), complete all as specified and as directed |
| 86 | Supply only water proofing compound, conforming to IS -2645,as specified and as directed |
| 87 | Material & labour for preparation of new plastered wall surfaces and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and providing and applying putty of 1 mm thickness to prepare the surface even and smooth complete all as specified and as directed. |
| 88 | Material & labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and as directed. |
| 89 | Material & labour for Non skid coloured ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.18 Sqm but n.exc 0.38 Sqm as in floor, etc and jointed in neat cement slurry over and including cement screed 20 mm thick (1:6) and pointed in white or coloured cement to match the colour of the tile, complete all as specified and as directed. |
| 90 | Material & labour for non skid coloured ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.18 Sqm but n.exc 0.38 Sqm in vertical surfaces such as skirting/dado laid over and including a backing coat of 10 mm thick Cement mortar (1:3) complete all as specified and as directed |
| 91 | Supply and fixing of 0.5mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, of any colour ,tensile strength of 550Mpa, as in roof covering ,cladding to wall ,ridge, gutter etc fixed with self tapping screws complete all as specified and as directed. |
| 92 | All as per item No. 91.00 but plain sheet for ridge, gutter etc fixed with self tapping screws, complete all as specified and as directed. |
| 93 | Supply and fixing of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-(Gde-E-250) quality, complete all as specified and as directed. |
| 94 | Supply and fixing of steel work in tubular trusses including special shaped washer etc using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 including fabrication complete all as specified and as directed. |
| 95 | Supply and fixing of Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe-410-(Gde-E-250) quality complete all as specified and as directed. |
| 96 | Material & labour for Providing plain cement concrete of type B0 (1:2:4), (using 12.5 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work as required complete all as specified and as directed. |
| 97 | Supply and fixing of chromium plated Sink mixer with regular spout, for mixing hot and cold water, complete all as specified and as directed. |
| 98 | Material & labour for 75 mm thick PCC, type C2 (1:3:6) using 40mm graded aggregate, finishing even and smooth without using extra cement as in plinth protections/path and laid fair in alternate bays, & construction joints to be given at every 3m interval and at corners of buildings complete all as specified and as directed. |
| 99 | Material & labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.11 Sqm but n.exc 0.18 Sqm in vertical surfaces such as skirting/dado laid over and including a backing coat of 10 mm thick Cement mortar (1:3) complete all as specified and as directed |
| 100 | Material & labour for Machine cut kota stone of 20-25 mm thickness, as in single piece as flooring , treads over & including 20 mm thick screed bed in CM (1:6 ), laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone, including rubbing/grinding and polishing & cutting two nos groove line, complete all as specified and as directed. |
| 101 | S & F of Anodised aluminium snap grid frame work for false ceiling, confirming IS:733, IS:737 & IS:1285 G.I. Hangers of 6 mm dia. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size & 60mm long, and expansion hold fasteners of 12.5mm diameter 40mm long & 4mm thick (E-Boards) and Non asbestos fibre cement building boards in ceiling, complete all as specified and as directed. |
| 102 | Material & labour for 8-10 mm thick heavy duty digital paving tiles (square / rectangular),polished and area of each tiles n. exc. 0.11 but n. exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile & laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 103 | Supply and fixing of 125X60 mm size pressed steel frames for doors with one or more rebates, including necessary fixing lugs, hinges lock strike plate, etc complete all as specified and as directed. |
| 104 | Supply and fixing of 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and covered with 6mm thick decorative face veneer with lipping/frame on both sides to match complete all as specified and as directed. |
| 105 | Supply and fixing of factory made wire gauzed PVC door shutter (panel will be wire gauzed in lieu of plain PVC sheet) 30 mm thick (style), consisting of frame made out of M.S. tubes for top rails, bottom rails stiles & lock rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. The wire gauze shall be wrapped on an additional square 8 mm MS Solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly, complete all as specified and as directed. Note:- Wire cloth / wire mesh shall be measured separately |
| 106 | Supply and fixing of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 107 | Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 108 | Supply and fixing of factory made Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening, complete as per specification & drawing |
| 109 | Supply and fixing of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stile sand plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 110 | Supply and fixing Aluminium alloy, anodised, 300mm long sliding door bolts with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed. |
| 111 | Supply and fixing of 200 mm long aluminium anodized barred tower bolts of extruded section, complete all as specified and as directed. |
| 112 | Supply and fixing of extruded aluminium alloy handles, fabricated type, anodised, 150mm long. 150 mm long cast type anodised, complete all as specified and as directed. |
| 113 | Supply and fixing of type B-21 Butt hinges,100mm size, extruded aluminium alloy with galvanised MS sheet hinges pin anodised, complete all as specified and as directed. |
| 114 | M & L for providing plain cement concrete, type B0 1:2:4, (using 12.5 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating including necessary form work as required, complete all as specified and as directed |
| 115 | Supply and fixing, as in repair, vitreous china wash basin, white, flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including waste pipe brackets, coupling, cutting for and pinning in ends of bracket or erecting stand complete all as specified and as directed. |
| 116 | Supply and fixing in repairs Stainless Steel Tubular towel rail , 20mm dia, 60cm long between flanges complete all as specified and as directed. |
| 117 | Supply and fixing in repair Brass chromium plated shower rose 125mm size, including shower arm with or without swivel joints complete all as specified and as directed |
| 118 | Supply and fixing in repair bib taps with long shank and cup, of fancy type, chromium plated screwed down, high pressure with crutch or butterfly handle screwed for iron pipes of 15mm bore complete all as specified and as directed. |
| 119 | Supply and fixing in repair stop/ Angle valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore complete all as specified and as directed. |
| 120 | Supply and fixing in repair vitreous china squatting pan \\"Orissa\\" pattern size 580 x 440mm white with 'P' or 'S' trap front or back inlet with integral foot rest (excluding flushing cistern and flush pipe), squatting pan including connection to trap and flushing pipe, anti syphonage pipe etc complete incl making good to floor complete all as specified and as directed. |
| 121 | Supply and fixing in repairs PVC valveless flushing cistern, low level, 10 litres capacity with syphonic action type with inlet ball valves, float and handle and connections to pipes and fixing of chain and pull (or) lever including brackets and 32mm dia PVC flush pipe of 60cm long complete all as specified and as directed. |
| 122 | Supply and fixing in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 123 | Supply and fixing in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed |
| 124 | Supply and fixing, as in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever lever brackets, waste coupling & pipe and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm, complete all as specified and as directed. |
| 125 | Supply and fixing in repairs Health faucet (ABS Body), mild steel, chromium plated, suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed. |
| 126 | Supply and fixing in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and as directed. |
| 127 | Supply and fixing in repair bowl urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws, CP spreader and pointing around urinals back in cement all as specified |
| 128 | Supply and fix as in repair,15 mm bore pillar tap, fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule, complete all as specified and as directed. |
| 129 | Supply and fix, as in repair, stop valve, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions, complete all as specified and as directed. |
| 130 | Material & labour for 150 mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed. |
| 131 | Material & labour for 150 mm dia Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed. |
| 132 | Material & labour for Cutting into existing manholes of 150mm dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and as directed. |
| 133 | Material & labour for cement concrete (1:2:4) type B1, (using 20 mm graded crushed stone aggregate) as in copings, benching, kerbs, kerbs for sides of drain, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and as directed. |
| 134 | Material & labour for 15 mm thick plaster rendering in CM (1:4) on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 135 | Material & labour for pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of manhole/soak pit/drain etc set in cement mortar (1:4), complete all as specified and as directed. |
| 136 | Material & labour for plain cement concrete (1:3:6), type C-2 using 40mm graded aggregate in foundations, filling and mass concrete in any position not otherwise specifically provided for complete all as specified and as directed. |
| 137 | Material & labour for PCC 1:2:4 type B 2 (Using 40 mm graded aggregate) in Foundation, filling and mass concrete etc, complete all as specified and as directed |
| 138 | Material & labour for PCC 1:2:4 type B 1(using 20 mm graded stone aggregate) as in surface channel and drain to even and smooth surface using extra cement including necessary formwork a complete all as specified and as directed |
| 139 | Material & labour for Cement Concrete 1:2:4 Type B0 using 12.5mm graded stone aggregate as in coping of poles, wall , top of drain and similar work etc. including necessary formwork , complete all as specified and as directed. |
| 140 | Material & labour for rendering 15mm thick neeru finish on Surface other then fair faces of Brick work or concrete surfaces even and smooth using extra cement in CM (1:6), complete all as specified and as directed. |
| 141 | Material & labour for RCC M-25 design mix (using 20 mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed. |
| 142 | Material & labour for RCC M-25 design mix (using 20 mm graded aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and as directed. |
| 143 | Material & labour for RCC M-25 design mix (using 20 mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span |
| 144 | Material & labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surface of concrete, complete all as specified and as directed. |
| 145 | Material & labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished (square, rectangular or polygonal) surface of concrete, complete all as specified and as directed. |
| 146 | Material & labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.for fair finished flat surface of concrete, complete all as specified and as directed. |
| 147 | Material & labour for Pre-cast cement concrete block masonry of type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6), complete all as specified and as directed. |
| 148 | Material & labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including finishing the surface fair and even, complete all as specified and as directed. |
| 149 | Material & labour for preparation of new plastered surfaces and applying two coats of cement based paint over a coat of Chalk whiting on wall, complete all as specified and as directed. |
| 150 | Supply and fixing 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid as in weep holes of drains, complete all as specified and as directed. |
| 151 | Material and labour for concealed point wiring for the followings with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC rigid conduit (medium grade) including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth continuity (green in colour) connected to common earth dolly including connected modular items/fixture like modular metal flush box, base/cover plate for switch/sockets etc including making good all disturbed surfaces to match the existing complete all as specified and directed as below :- Item continued as item Nos 151.01 to 151.03 |
| 152 | (a) One light/fan/bell point controlled by one way switch. |
| 153 | (b) One 3 Pin 5 Amps socket out let point on independent board. |
| 154 | (c) One 3 Pin 5 Amps socket outlet point on same board alongwith other suitable switches. |
| 155 | All as per item No. 151.00 here-in-before but using 2.5 sqmm PVC FRLS insulated copper conductor wire for connecting 15A socket on independent board complete all as specified and as directed |
| 156 | Supply and fixing of modular switch one way 6 amps 1 module 240 volts, complete all as specified and as directed |
| 157 | Supply & fixing of modular type,1 module 16 Amps one way switch 240 Volt AC complete all as specified and as directed |
| 158 | Supply & fixing of modular socket out let 2/3 pin 6 Amps combined 2 module 240 Volts complete all as specified and as directed |
| 159 | Supply & fixing of modular type, 2 module, 6/16 Amps combined socket 240 Volt AC complete all as specified and as directed. |
| 160 | Supply and fixing of modular fan regulator for BLDC fans, 2 module 240 Volts complete all as specified and as directed. |
| 161 | Supply and fixing of modular bell push 6 amps 1 module 240 Volts complete all as specified and as directed.. |
| 162 | Supply and fixing of bell electric, 240 Volts, single pole complete all as specified and as directed. |
| 163 | Supply and fixing of ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified and as directed. |
| 164 | S & F in repair Surface and wall mounted LED batten 20 watt 4ft long (white/warm white in required basis) with Aluminium housing & integrated Electronic Driver with IP20, PF 0.90, total System Lumens 1050 Lumens, 6500k CRI ≥ 80, Operating Voltage range 140 V - 270 V complete all as specified and as directed. |
| 165 | Supply and fixing round shape 15 watt warm white in color 220 volts AC recessed type (white/warm white in required basis) with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 166 | Supply and fixing in repair of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type (white/warm white in required basis) with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 167 | Supply and fixing round shape 6/7 watt (white/warm white in required basis) in color 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 168 | S & F in repair of wall mounted decorative type warm white in colour LED mirror light 6 watt, 2ft long in white aluminium finish complete all as specified and as directed |
| 169 | Supply and fixing of Modern LED Decorative wall light (white/warm white in required basis) premium metal quality brass finishes with 02 Head, rust free fixture with white glass diffuser warm white in color suitable for 9/12 W LED lamp/bulb E27 base, incl LED lamp complete all as specified & as directed. |
| 170 | S & F of LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 171 | Supply and fixing of single Pole & Neutral enclosure with 2 pin and earth plug & socket for incorporating with double pole 20 Amp MCB complete all as specified and as directed |
| 172 | Supply and fixing of starter for AC's of rating 25 Amps with MCB protected power unit 230 Volts complete all as specified and directed. |
| 173 | Supply and fixing in repair of MCB TPN DB 4 way double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08 complete all as specified and directed |
| 174 | Supply & fixing in repair of MCB TPN 63 Amps 'C' Series 10 KA 415 volts complete all as specified and as directed. |
| 175 | Supply and fixing in repair of MCB SPN DB 12 way double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08 complete all as specified and as directed |
| 176 | Supply and fixing in repair of MCB SPN 32/40 Amps 'C' series 10kA 240 volts complete all as specified and as directed. |
| 177 | Supply and fixing in repair of MCB SP 6-32 Amps 'C' series 10kA 240 volts complete all as specified and directed. |
| 178 | Supply and fixing Telephone socket RJ-45, suitable for CAT 6 cable, shielded, folded metal 1 module all as directed. |
| 179 | Supply and fixing TV coaxial socket,1 module complete all specified and as directed. |
| 180 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep complete all as specified and as directed. |
| 181 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 182 | Supply and fix exhaust fan, steel body AC single Phase 230V of size 300m sweep with blades, and frame and louvers complete all as specified and as directed. |
| 183 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep heavy duty with, blades, and frame and louvers complete all as specified and as directed. |
| 184 | Supply and fixing of wall mounted air circulator high flow wave oscillating fan 65W ,AC single Phase, 230V of size 400 mm (16 inches) complete all as specified and as directed. |
| 185 | Supply and fix electric water geyser, storge type steel body with copper inner tank and heating element upto 2 KW capacity 25 ltrs, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed. |
| 186 | Supply and fixing of busbar chamber 4 way of current rating 200 Amps, wall mounted made of ETP grade copper incl cable connection with suitable aluminium lugs & glands complete all as specified and as directed. |
| 187 | Material & labour for Sub main wiring with two runs of single core 2.5 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn through and including PVC concealed conduit medium grade of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi stranded copper conductor of size 2.5 Sqmm as earth wire (green in colour) run through PVC concealed conduit and connected common earth dolly including taking out the old sub main wiring for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. |
| 188 | Material & labour for Sub main wiring with two runs of single core 4 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn through and including PVC concealed conduit medium grade of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi stranded copper conductor of size 4 Sqmm as earth wire (green in colour) run through PVC concealed conduit and connected common earth dolly including taking out the old sub main wiring for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and as directed. |
| 189 | Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn through and including PVC concealed conduit medium grade of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi stranded copper conductor of size 6 Sqmm as earth wire (green in colour) run through PVC concealed conduit and connected common earth dolly including taking out the old sub main wiring for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and as directed. |
| 190 | Material & labour for Sub main wiring with four runs of single core 10 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn through and including PVC concealed conduit medium grade of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi stranded copper conductor of size 10 Sqmm as earth wire (green in colour) run through PVC concealed conduit and connected common earth dolly including taking out the old sub main wiring for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and as directed. |
| 191 | Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized iron GI wire of size 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion including dismantling old unsv ones complete all as specified and as directed |
| 192 | Supply and fixing of LED landscape LED spike/bush light (white/warm white in required basis) with die cast aluminium housing of premium metal quality designed for rugged outdoor usage & IP 65 Protection, warm white in color of 9W complete all as specified and as directed Please Enable Macros to View BoQ information |
| 193 | Supply and fixing of LED landscape LED spike/bush light (white/warm white in required basis) with die cast aluminium housing of premium metal quality designed for rugged outdoor usage & IP 65 Protection, warm white in color of 9W complete all as specified and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 34 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender