Tender For Special Repairs To Block Nos 79 And 80 Of Siromani Company Of Mrc Under Ge Wellington
Tender Value
1.43 Crore
Estimated cost
Bid Submission
22 Oct 2026
19 days left
EMD
2.18 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Block Nos 79 And 80 Of Siromani Company Of Mrc Under Ge Wellington
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE WELLINGTON NAME OF WORK: SPECIAL REPAIRS TO BLOCK NOS 79 AND 80 OF SIROMANI COMPANY OF MRC UNDER GE WELLINGTON Contract No: CWE/ WEL/ OF 2025-26 Bidder Name : SCHEDULE 'A' (BOQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item of Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency Rate in Figures to be entered by the Bidder including all Taxes etc.Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category Total amount TOTAL AMOUNT With Taxes Total amount in words |
| 2 | Dismantling Single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed |
| 3 | M & L for Roof tiles, Mangalore pattern, interlocking at side joints, laid over and including 15mm thick screed bed or bedding layer in CM 1:6 on roof complete all as specified and directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 5 | M & L for pre-polished calibrated machine cut kota stone, 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in flooring laid over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 6 | M & L for pre-polished calibrated machine cut kota stone, 20mm thick as in riser of steps, skirting, dado and pillar laid over and including 10 mm thick, screed bed in cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 7 | M & L for coloured, glazed, ceramic, tiles of size (450mm x 350 mm/350mm x 250mm) x7 mm thick, as in vertical surfaces such as skirting, dados etc, and set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick bedding in cement mortor 1:3 complete all as specified and directed. |
| 8 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, and set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortor 1:4 complete all as specified and directed. |
| 9 | M & L for Granite tiles, 20mm thick machine cut, bedded & jointed with grey cement slurry and pointed with white cement with admisture of pigment to match the shade of granite stone including cutting and polishing over and including 15mm thick screed bed in cement mortor 1:4 complete all as specified and directed. |
| 10 | S & F in repairs vitreous China wash basin, size 550 x 400mm, white, flat back including brackets, cutting for and pinning in ends of brackets or erecting stand with and including brass chromium plated perforated waste coupling/fittings, 32mm dia with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32mm bore of suitable length, 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection pipe, 15mm size with PTMT nuts of length 450mm and fixed complete all as specified and directed. |
| 11 | Demoltion of Brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles as directed by the Engr-in-Charge. |
| 12 | M & L for Pre-cast cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate), block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 13 | Demolition of un-reinforced cement concrete in ground floors and pavings n.exc 15cm thickness, (Below or above Ground level) and removing debris from site of work complete all as directed by the Engr-in-Charge |
| 14 | M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed. |
| 15 | S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), 'P' or 'S' trap, white, including flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern, PVC seat and cover (white), closed pattern with flat bottom and cover brass chromium plated hinging device including connection to outgoing drain and flushing pipe, anti syphonic pipe including making good damaged/disturbed surfaces complete all as specified and directed. |
| 16 | S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed. |
| 17 | S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float, overflow pipe and handle including brackets complete all as specified and directed. |
| 18 | Demolition of reinforced cement concrete in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 19 | M & L for use & waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished surface of concrete flat complete all as specified and directed. |
| 20 | M & L Reinforced Cement Concrete 1:1.5:3, Type A-1 (Nominal Mix) (using 20 mm graded stone aggregate) as in beams, cantilevers, lintels over 1.5m span complete all as specified and directed.(Note : Reinforcement will be measured & paid seperately) |
| 21 | S & F high strength TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 22 | S & F high strength Mild steel TMT bars 5mm dia and over upto and including 10mm dia in strirrups, spacers and binders spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed. |
| 23 | Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. |
| 24 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).(Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.) |
| 25 | S & F 5 mm thick, toughened glass, selected quality fixed to frame of any type complete all as specified and as directed. |
| 26 | S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 27 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete as per specification and drawing and as directed. |
| 28 | S & F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 29 | S & F 150 mm size, Aluminium handles, cast type, anodised complete all as specified and directed. |
| 30 | S & F 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 31 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal from site complete all as directed. |
| 32 | Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal from site complete all as directed. |
| 33 | Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed concealed to walls and ceilings or laid in floors, etc including cutting chases to wall and making good disturbed surfaces as per the existing one complete all as specified and directed. |
| 34 | Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed concealed to walls and ceilings or laid in floors, etc including cutting chases to wall and making good disturbed surfaces as per the existing one complete all as specified and directed. |
| 35 | S & F in repair 15mm bore, Long body bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 36 | S & F in repairs, 15 mm bore, Stop valves, fancy type cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 37 | S & F in repairs 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed. |
| 38 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specifiedcomplete all as specified and directed. |
| 39 | S & F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 40 | S & F in repair 600mmX450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromiun plated brass screws and cup washers complete all as specified and directed. |
| 41 | S & F in repair 20 mm bore, Brass chromium plated, tubular towel rail, D type, 60 cm long between flanges with brackets complete all as specified and directed. |
| 42 | S & F in repair PVC (SWR) floor trap, with grating including jointing to waste pipe with solvent cement, dia of outlet 75 mm complete all as specified and directed. |
| 43 | S & F in repair Grating doom 125mm dia of PTMT with or without waste hole (Minimum weight 40gms) complete all as specified and directed. |
| 44 | S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 45 | Taking down PVC/CI pipes of any size and any pattern jointed in cement mortar, taking out of wall, eaves gutters and rainwater/soil/waste pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed |
| 46 | S & F 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, etc complete all as specified and directed. |
| 47 | S & F 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, etc complete all as specified and directed. |
| 48 | S & F 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed. |
| 49 | S & F 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed |
| 50 | S & F 110 mm bore, PVC (SWR) bends of any radius with oval access door complete all as specified and directed. |
| 51 | S & F 75 mm bore, PVC (SWR) bends of any radius with oval access door complete all as specified and directed. |
| 52 | S & F 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 53 | S & F 75mm bore, PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed. |
| 54 | S & F 110 mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door complete all as specified and directed. |
| 55 | S & F 75 mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door complete all as specified and directed. |
| 56 | S & F 110 mm bore, PVC (SWR) branch piece, double (double Y) equal or unequal with oval access door complete all as specified and directed. |
| 57 | S & F 75 mm bore, PVC (SWR) branch piece, double (double Y) equal or unequal with oval access door complete all as specified and directed. |
| 58 | S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore of pipe complete all as specified and directed. |
| 59 | S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore of pipe complete all as specified and directed. |
| 60 | S & F 110 mm bore, PVC (SWR) vent cowl complete all as specified and directed. |
| 61 | S & F 75 mm bore, PVC (SWR) vent cowl complete all as specified and directed. |
| 62 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing same from the site(s) complete all as specified and directed |
| 63 | M & L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 and 5mm thick in cement mortar 1:4 over 10mm thick, mixed with integral water proofing compound as per manufacturer's instructions and finished the surface even and fair without using extra cement over complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 64 | Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 65 | M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as on ceilings of chajjas/ roof projections etc and finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 66 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 67 | M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer and over 3mm thick wall care putty to a smooth surface complete all as specified and directed. |
| 68 | M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 69 | M & L for preparation of new plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 70 | M & L for preparing old decorated surfaces of ceiling including cornices, pilasters etc by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed. |
| 71 | M & L for complete removal of existing treatment from old decorated plastered surfaces of wall and applying 3mm thick wall care putty to an even and smooth surface and applying two coats of distemper oil emulsion (washable) over a coat of alkali resistant primer complete all as specified and directed. |
| 72 | Material & Labour for complete removal of existing treatment, preparation of surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 73 | S & F 1000 litres capacity, three layered, rotational moulded polyethylene water storage tanks, three layered (Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable one complete all as specified in SSR Part I and directed. |
| 74 | S & F in repairs, 20 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and directed. |
| 75 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed. |
| 76 | M & L for Point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed stranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC conduit not less than 20 mm dia medium grade (ISI marked) in concealed including one run of single core 1.5 Sq.mm unsheathed stranded copper conductor cable FRLS [ISI marked] as earth wire connected to common earth dolly and earth in distribution board for one light/exhaust fan/fan point/call bell controlled by one way switch complete all as specified and as directed.(Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface. (ii) Cuutting chases for concealed wiring shall be measured and paid seperately(iii) MS Sunken box with Modular cover plate and frame for modular switches, sockets etc shall be measured and paid seperately(iv) Blank plate required if any shall be deemed to be included with the unit quoted rate) |
| 77 | All as per item No. 75 above but for One 3/5 pin socket outlet 6 amps on independent board complete ditto |
| 78 | All as per item No. 75 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 2.5 sqmm multistranded FRLS (ISI marked) and 2.5 sqmm PVC insulated unsheathed solid copper conductor cable FRLS (ISI marked) as earth lead complete ditto |
| 79 | S & F ceiling rose, three terminals, PVC/polycarbonate, isolated body complete all as specified and directed. |
| 80 | S & F switch modular single pole one way 6 amp 230 volts AC, 50 Hz 1 Module complete all as specified and as directed. |
| 81 | S & F switch modular single pole one way 16 amp 230 volts AC, 50 Hz, 1 Module complete all as specified and as directed. |
| 82 | S & F Modular socket outlet 6A, 2/3 pin combined, 2 module complete all as specified and as directed. |
| 83 | S & F Modular socket outlet 6A/16A, 2/3 pin combined, 2 module complete all as specified and as directed. |
| 84 | S & F Modular metal flush box, 1/2 module complete all as specified and as directed. |
| 85 | S & F Modular metal flush box, 3 module complete all as specified and as directed. |
| 86 | S & F Modular metal flush box, 4 module complete all as specified and as directed. |
| 87 | S & F Modular metal flush box, 6 module complete all as specified and as directed. |
| 88 | S & F Modular white cover plate with frame, 1 module complete all as specified and as directed. |
| 89 | S & F Modular white cover plate with frame, 2 module complete all as specified and as directed. |
| 90 | S & F Modular white cover plate with frame, 3 module complete all as specified and as directed. |
| 91 | S & F Modular white cover plate with frame, 4 module complete all as specified and as directed. |
| 92 | S & F Modular white cover plate with frame, 6 module complete all as specified and as directed. |
| 93 | Taking down existing unserviceable DBs with MCBs and S & F Distribution Board, SPN, 8 way, 240V, Double door with 200 Amps rated bus bar including necessary dummy plate and necessary civil work complete all as specified and as diretced complete all as specified and directed. |
| 94 | S & F miniature circuit breaker (MCB), SPN, 32 Amps rating, 240 Volts, 10KA, C Curve complete all as specified and as directed |
| 95 | S & F miniature circuit breaker (MCB), SP, 6 to 32 Amps rating, 240 Volts, 10KA, C Curve complete all as specified and as directed |
| 96 | Supply and fixing LED lights fitting, 25W, 125 Lum/Watts, 4ft batten comprising of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white complete all as specified and directed. (Make: Havell's Cat No. No. LHEXAWPN7IN1W025 or equivalent make as per list of manufacturer's) |
| 97 | Supply and fixing LED light fittings mirror type with high out put deffuser, 2 feet, 10 Watt, 220 V AC, decorative type with driver holder and LED lamp including connecting up with thre core flexible copper conductor cable of suitable size complete all as specified and directed. (Make: Havell's Cat No. No. LHEXACP5IN1W010 or equivalent make as per list of manufacturer's) |
| 98 | M & L for Sub main wiring with 2 runs of Single core 6 sqmm PVC insulated multi stranded FRLS (ISI marked) copper conductor cable drawn through and including surface PVC casing capping of suitable size, medium grade with all fittings along with 1 run of single core 6 sqmm PVC insulated multi stranded FRLS (ISI marked) copper conductor cable as earth continuity conductor including taking down existing submain wiring complete all as specified and as directed.(Note :- Two runs of 6 sqmm and one runs of 6 sqmm cable as earth wire and one run of casin capping shall be measured as one length) |
| 99 | Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10 cm girth complete all as specified and directed. |
| 100 | Supply and fix exhaust fan, steel body AC single Phase, 230V of size 300mm sweep with, blades, and frame and louvers, complete with all accessories and electric connection including making necessary holes in walls and making good disturbed surfaces as per the existing one complete all as specified and directed |
| 101 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 102 | M & L for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia TMT bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (light grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion complete all as shown in Electrical Plate No. 03 of SSR Part-I, 2009 inclduing taking down old one complete all as specified and as directed by the Engineer-in-Charge. |
| 103 | Repair/ servicing of existing Solar Water Heater including cleaning of panels, changing of tubes, changing of thermostat and connected items (as necessary to keep the heater fully functional) complete all as specified and as directed by the Engr-in-Charge. Total in Figures 0.0 0.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender