Tender For Special Repairs To Building No. P-17 At South C Us Of Afmc Under Ge (Central) Pune.
Tender Value
1.39 Crore
Estimated cost
Bid Submission
22 Oct 2026
19 days left
EMD
2.15 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Building No. P-17 At South C Us Of Afmc Under Ge (Central) Pune.
BOQ
| Sl. No. | Item Description |
| 1 | B&R PORTIONTaking down chowkats or frames with shutter (without taking off shutter from the frames) not exc 1.50 Sqm each with and including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc 1.50 Sqm but not exc 4 Sqm each with and including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed. |
| 3 | Taking down shutters of any description, not exc 1sqm each and removal from site etc complete all as specified and directed. |
| 4 | Taking down shutters of any description, exc 1sqm and not exc 2 sqm each and removal from site etc complete all as specified and directed. |
| 5 | M&L for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 6 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 7 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, including supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 8 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for frame and shutters of doors, windows (three-track type) & ventilators (louvers type) including providing and fixing hinges/ pivots etc and making provision for fixing of fittings wherever/ whichever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections / three-track type made of extruded aluminium profiles with hollow multi-chamber sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as per architectural drawings and the directed(Note : The unit rate quoted by contractor includes the cost of 01 Sets louvers for each ventilator having 06-10 blades for receving glass, 03 Nos concealed type lock and 06-09 roller for three track window for shutters for each windows, 03 hinges / 01 pivots and 02 handles for each shutters of doors. Glass and wire mesh to be measured and paid separately.) |
| 9 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directed. |
| 10 | S&F sheet glass 4.00 mm thick ordinary quality in square/ rectangle shape, exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 11 | S&F sheet glass 5.00-5.50 mm thick ordinary quality in square/ rectangle shape, exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 12 | S&F 4mm thick figured glass, pin head type in squares/ rectangle shape, n.exc 0.5 sqm in each pane complete all as specified and as directed. |
| 13 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 14 | S&F 12mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to aluminium frame work complete all as specified and directed. |
| 15 | S&F Mortice lock, vertical type, size 100 mm (4 levers) complete all as specified and directed |
| 16 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 17 | M&L for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, framework of eves board and similar work conforming to Fe-290 Gde-E-165 complete all as secified and directed. |
| 18 | M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 19 | M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 20 | M&L for preparing old painted wooden surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 21 | M&L for preparation old steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 22 | S&F for 125 mm butt hinges, extruded aluminium alloy with stainless mild steel hinge pin, anodised and fixed complete all as specified and directed. |
| 23 | S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 24 | S&F 200mm size Aluminium anodised,barrel tower bolt of extruded section complete all as specified and directed. |
| 25 | S&F extruded Aluminium anodised, handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 26 | S&F in repair 100mm long Aluminium anodised, floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed. |
| 27 | S&F in repairs Door closer Aluminium (extruded body section) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 28 | S&F in repairs fancy type stainless steel curtain rod 20 mm dia with heavy duty bypass ‘C’ shape brackets or ‘U’ / Circular shape wall to wall brackets, both of SS 304 grade including stops, rollers etc including stainless steel side stopper fancy type of required shape and size, 2 Nos for each opening wherever required complete all as specified and directed. |
| 29 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 30 | M & L for brick work with flyash bricks straight or curved on plan exc 6 m mean raidus built in old size bricks cm 1:4 complete all as specified and directed. |
| 31 | M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 using old size bricks complete all as specified and directed. |
| 32 | Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 33 | M&L for 15mm thick plastering in CM 1:6 on concrete on fair faces of bricks or concrete surfaces of wall finished even smooth with thin layer of sagol finish on plastered surface etc complete all as specified and directed. |
| 34 | M&L for rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick / concrete / stone wall surfaces at any height of any description, and finishing the surfaces even and fair complete all as specified and directed. |
| 35 | M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make with and including 2mm thick wall care putty, colour as approved by GE complete all as specified and directed. |
| 36 | M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make, colour as approved by GE with and including complete removal of existing treatment of any layer of wall and 2mm thick wall care putty complete all as specified and directed. |
| 37 | M&L for preparing surfaces newly plastered or unplastered surfaces of walls/ manglore tiles surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 38 | M&L for preparing surfaces old plastered or unplastered surfaces of walls/ manglore tiles surface etc and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/Ten sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over with and including complete removal of existing treatment of any layer of wall and prepariing complete all as specified and directed. |
| 39 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 40 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 41 | M&L for 75 thick PCC (1:3:6) type C2 for plinth protection by using 20mm graded curshed stone aggregate finished fair and even laid to a slope of 1:20 with and including 12mm wide and 50mm deep joint shall be provided at a distance not exceeding 3 Mtr and at corners. The joints shall be filled with mastic filling of bitumen 85x25 and the sand in the ratio 1:2 complete all as specified and directed. |
| 42 | M&L for 75mm average thickness (1:4:8) Type-D2 (using 40mm graded crushed stone aggregate) as in levelling course / sub base of flooring complete all as specified and directed. |
| 43 | M&L for 25mm average thickness (1:2:4) Type-B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed. |
| 44 | M&L for 10 mm thick vitrified coloured ceramic tiles (light shade Premium quality) (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 20mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 45 | All as per Ser. item No. 44.00 above but on skirting laid over with and including 10mm thick backing coat in CM 1:4 and tringular filleting in CM 1:6 on top of tiles complete all as specified and directed. |
| 46 | M&L for non skid joint free ceramic tiles coloured as required of 7 to 8 mm thick (square/ rectangular) (Premium quality) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) compete all as specified and directed. |
| 47 | M&L for glazed joint free ceramic tiles coloured of size 600 x 300 x 7-8 mm thick on vertical surfaces (premimum quality) such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including exc 10mm thick backing coat in CM 1:4 and tringular filleting in CM 1:6 on top of tiles complete all as specified and directed.(NOTE for Ser. Item No. 44.00 to 47.00 above : (i) Shade/ colour to be approved by Garrison Engineer in consultation with user.)(ii) Sample / make for tiles shall be got approved by contractor from GE prior placing bulk order.) |
| 48 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc (laid, bedded and pointed in any mortar) complete all as specified and directed. |
| 49 | M&L for 18-20mm thick granite (of any type and shade) work table rubbed and pre-polished as used in cooking / working platforms, staircase incl riser & tread, steps, jambs, pillars, windowcills, partition and similar work in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite with including 15mm thick backing coat in CM (1:4) including tringular filleting in CM 1:6 on top of tiles and ensure best adhesion to surface complete all as specified and directed. |
| 50 | M&L for machine cut cudappah stone slab 25-30mm thick for vertical and horizontal supports to platforms for granite and marble works to any purpose and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as specified and directed. |
| 51 | M & L for factory made chamfered edge cement concrete chequered tiles of size 300mm x 300mm x 20mm thick conforming to IS-1237 (2006) with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 52 | Dismantling water tank of capacity exceeding 500 liters but not excedding 1000 Ltrs complete all as specified and directed. |
| 53 | S&F rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 54 | S&F 20mm bore Nipple suitable for HDPE water tank (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed. |
| 55 | S&F in repairs 20mm bore PVC brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 56 | S&F in repairs 20mm bore gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 57 | Taking up or down 15mm bore steel / composite / UPVC /CPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed. |
| 58 | S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls & surface of roof slab with and including making good to required surfaces by using white cement complete all as specified and directed. |
| 59 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealedwater tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth completed all as specified and directed. |
| 60 | Taking up or down 20mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed. |
| 61 | S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed. |
| 62 | S & F in repairs Single Bowl sink made of stainless steel 1mm thick kitchen or laboratory of size (24 x 18 x 9 Inch) Gloss Finish with plugs, washers and wastes; including mounted & bedding in cement mortar on grinte platform with and including 32mm full thread CP waste coupling, bottle traps / connection hose (Polymer P Trap), CP Sink Cock with Swinging Spout complete all as specified and directed.(Note : Sample / make for Sink and its accessories shall be got approved by contractor from GE prior placing bulk order.) |
| 63 | S&F in repairs vitreous china wash down water closet pan of Netural/ Warm / Bright Colour, (S Trap, Size 525 X 380 X 400 mm) / (P Trap, Size 530 X 380 X 400 mm) with and including Standard Regular Seat Cover with fixing on floor surface with appropriate materials and fitting to inlet, outlet pipe connections etc. complete all as specified and directed.(Note : Sample / make shall be got approved by contractor from GE prior placing bulk order.) |
| 64 | S&F in repairs 10 Itrs PVC (Colour Netural/ Warm / Bright) valve less syphonic action type, single flushing cistern low level with inlet ball valve float including necessary fittings with wall complete all as specified and directed. (Note : Sample / make for flushing cistern shall be got approved by contractor from GE prior placing bulk order.) |
| 65 | S&F in repairs Oval shape (netural colour) vitreous chaina below counter basin of size 510 x 415 x 190mm, including 32mm full thread CP waste coupling, and bolltle traps / connection hose (Polymer P Trap) and CP Pillar Cock Swan Neck, complete all as specified and directed.(Note : Sample / make for counter basin shall be got approved by contractor from GE prior placing bulk order.) |
| 66 | S&F in repairs 15mm dia bib cock of cast copper alloys chromium plated fancy type with fancy handle with wall flange screwed down screwed for iron /CPVC pipe or for iron or for brass ferrule complete all as specified and directed. |
| 67 | S&F in repairs 15mm angle valve of cast copper alloys chromium plated fancy type with fancy handle with wall flange screwed down screwed for iron /CPVC pipe or for iron or for brass ferrule, complete all as specified and directed. |
| 68 | S&F in repairs 15mm two way bib cock of cast copper alloys chromium plated fancy type with fancy handle with wall flange screwed down screwed for iron /CPVC pipe or for iron or for brass ferrule, complete all as specified and directed.(Note : Sample / make for bib cock shall be got approved by contractor from GE prior placing bulk order.) |
| 69 | S&F in repairs CP Health faucet with flexible hose pipe & hook fancy type complete all as specified and directed.(Note : Sample / make for health faucet shall be got approved by contractor from GE prior placing bulk order.) |
| 70 | S&F in repairs chromium plated toilet paper holder with cover, complete all as specified and directed.(Note : Sample / make for toilet paper holder shall be got approved by contractor from GE prior placing bulk order.) |
| 71 | S&F in repairs, brass CP soap dish complete all as specified and directed.(Note : Sample / make for CP Soap Dish shall be got approved by contractor from GE prior placing bulk order.) |
| 72 | S&F in repairs CP Towel Ring complete all as specified and directed.(Note : Sample / make for CP towel ring shall be got approved by contractor from GE prior placing bulk order.) |
| 73 | S&F as in repairs CP towel rail complete all as specified and directed.(Note : Sample / make for towel rail shall be got approved by contractor from GE prior placing bulk order.) |
| 74 | S&F in repairs PVC connection 60cm long 15mm dia, with 2 Nos CP brass check nuts complete all as specified and directed. |
| 75 | S&F in repairs looking mirror 5.50mm thick of selected quality glass moulded edge of approved size, mounted on wall by using fixing required materials such as MHS stainless steel wall brackets complete all as specified and directed. |
| 76 | Dismantling single layer Mangalore pattern or similar tiles in slope roofing complete all as specified and directed. |
| 77 | Dismantling single layer Mangalore pattern or similar tiles in slope roofing portions bedded in lime or cement mortar complete all as specified and directed. |
| 78 | M & L for Roof tiles, Mangalore pattern, class 'AA' , inerlocking at side joints, laid dry on slope roof complete all as specified and directed. |
| 79 | Re-fixing only for Roof tiles, Mangalore pattern, class 'AA', inerlocking at side joints, laid dry on slope roof complete all as specified and directed. (Note : Serviceable items received dismantling to be used) |
| 80 | S&F ridge or hip tiles class ‘AA’ to suit manglore pattern roofing tiles bedded and jointed in CM 1:6 on slope roof complete all as specified and directed. |
| 81 | Re-fixing only for ridge or hip tiles class ‘AA’ to suit manglore pattern roofing tiles bedded and jointed in CM 1:6 on slope roof complete all as specified and directed. (Note : serviceable items received dismantling to be used) |
| 82 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, any description and in any position on slope roof complete all as specified and directed. |
| 83 | S&F Galvanised, corrugated mild steel sheeting of 0.63mm thickness with two corrugations side lap, fixed with L type or J type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 on slope roof complete all as specified and directed. |
| 84 | Fixing only Galvanised, corrugated mild steel sheeting pf 0.63mm thickness with two corrugations side lap, fixed with L type or J type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 on slope roof complete all as specified and directed. (Note : Serviceable sheets received Dismantling to be used) |
| 85 | S&F galvanized plain mild steel sheeting 1.00mm thick in ridges, hips, valley gutters, drip & straight flashings (length and firth as fixed ) with grade of zink coating 275 on slope roof complete all as specified and directed. |
| 86 | Fixing only galvanized plain mild steel sheeting 1.00 mm thick in ridges, hips, valley gutters, drip & straight flashings (length and firth as fixed ) with grade of zink coating 275, except Sheet on slope roof complete all as specified and directed.(Note : Serviceable sheets received Dismantling to be used) |
| 87 | Dismantling timber scantlings 40 sqcm and over in section, in any position of framed work complete all as specified and directed. |
| 88 | M&L for Clean sawn Second class hard-wood in timber framed and fixed scantlings complete all as specified and directed. |
| 89 | All as per Ser. Item No. 88.00 but except timber complete all as specified and directed. |
| 90 | Dismantling battens for tiles, shingles etc of any size including tilting fillets, spaced exc.15 cm complete all as specified and directed. |
| 91 | M&L for 2nd class hard wood battens, clean sawn, at 30 cm centres, sectional area exc. 5 Sqcm but not exc. 15 Sqcm, fixed with nails complete all as specified and directed. |
| 92 | All as per Ser. Item No. 91.00 above but fixing only complete all as specified and directed.(Note : Serviceable items received Dismantling to be used) |
| 93 | Dismantling fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section of un-framed work complete all as specified and directed. |
| 94 | M&L for 2nd class hardwood, Plain fillets exc 13 Sqcm and not exc 25 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed. |
| 95 | M&L for Tiles or slate battens, any size and spacing, prepared and treated all over with two coats of creosote oil complete all as specified and directed. |
| 96 | M&L for Tiles or slate battens, any size and spacing, prepared and treated all over with one coat of creosote oil complete all as specified and directed. |
| 97 | M&L for Preparing new surfaces of wood and wood based materials, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed. |
| 98 | M&L for Preparing old surfaces of wood and wood based materials, of any description and girth, not otherwise described and treated with, all over with one coat of creosote oil complete all as specified and directed. |
| 99 | Dismantling Boarding of any description fixed in any position with nails,with or without cover fillets complete all as specified and directed. |
| 100 | S&F pre-painted both side galvanized plain mild steel sheeting 1.00mm thick as used in eves board/ weather board with grade of zink coating 275 on slope roof complete all as specified and directed. |
| 101 | M&L for PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof kerbs, rounded or chamfered on edges, including necessary form work complete all as specified and directed. |
| 102 | M&L for filleting in any position & to any shape, sectional area exc. 25 but not exc. 50 sqcm in CM 1:4 including all mitres, stops etc, complete all as specified and directed. |
| 103 | S&F in repair single/multi PVC (SWR) floor trap 75mm dia, palin with grating including joining to waster pipe, fixed in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) complete all as specified and directed. |
| 104 | Dismantling of cast iron / PVC pipes any size of bore as in soil waste or vent pipe including removal of cement joints fixed to wall or laid in floor complete all as specified and directed. |
| 105 | S&F 40mm bore pipe Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid including all necessary fittings such as elbow, tee, socket etc on wall, floor and trenches complete all as specified and directed. |
| 106 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed. |
| 107 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed. |
| 108 | S&F 110 mm bore PVC (SWR) bends any radius provided with access door complete all as specified and directed. |
| 109 | S&F 75 mm bore PVC (SWR) bends any radius provided with access door complete all as specified and directed. |
| 110 | S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed. |
| 111 | S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed. |
| 112 | S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed. |
| 113 | S&F sheet glass 3.00 mm thick ordinary quality and glazing with oil putty in square/ rectangle not exc 0.5 Sqm in each pane with and including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed. |
| 114 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 115 | Dismanting Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 116 | S&F powder coated GI grid frame work of grid size 605mm x 605mm for false ceiling flat or sloping all as specified including pre-painted non asbestos fibre cement building boards (approx size 600mm x 600mm) fixed or laid on GI grid framework and hangers 3 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats / fastner made out of G.I. flat of appropriate size as per site reqirement complete all as specified and directed. |
| 117 | Complete removal of existing old APP membrane / bituminous tarfelt (water proofing treatment) / any type of existing treatment upto 100mm thickness i.e PCC padding and screed bed carefully by low impact high frequency hammer or any other suitable method without damaging the existing RCC surface of the slab with and including cleaning/removing of old existing primer any type by using remover adhesive/liquid and preparation to surfaces of roof slab, walls, chajjas etc. (old or new) with wire brush drying and cleaning to remove all foreign materials and washing preferably with high jet pressure pump or mechanical with water to remove loose particles complete all as specified and directed. (Note : Debris obtained from demolition/dismantling shall be removed outside MD land by the contractor. The rate quoted for respective items shall be deemed to include this provision) |
| 118 | M&L for providing 40 mm average thick PCC 1:2:4 type B-0 (using 20mm graded stone aggregate) with maintain the proper roof slope to be laid over the RCC roof slab, walls, chajjas etc. complete all as specified and directed. |
| 119 | M&L for providing and laying protective screed of 15 mm thick in CM 1:4 proportion with integral waterproofing compound Conplast WL Xtra @ 200 ml/ bag of cement to be laid over the RCC roof slab, walls, chajjas etc. when surface of PCC is green with and including finishing the surfaces even and fair without using extra cement complete all as specified and directed. |
| 120 | M&L for applying a uniform coat of approved primer at 0.70 kg/sqm using for water proofing treatment over cement plaster and laying minimum 3 mm thick and weighing not less than 3.6 kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen - based prefabricated five layer water proofing membrane reinforced with non woven polyester matt black finished over compatible primer at 0.40 Ltr/sqm of density at 25ºC, 0.87-0.89kg/litre and viscosity 70-160 cps or cold sticker and torch application of membrane with 10 cm overlap both ways after necessary preparation of surface complete as per manufacturers instructions on surfaces of roof slab, walls, chajjas etc. with and including preparation and applying two coats of bitumastic - aluminium paint over the APP membrane complete all as specified and directed. |
| 121 | M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of white wash on old decorated surface with and including complete removal of existing treatment of any layer of wall complete all as specified and directed. |
| 122 | M&L for preparing old plastered or unplastered surfaces of ceiling and applying two coats of white wash on old decorated surface with and including complete removal of existing treatment of any layer of ceiling surfaces complete all as specified and directed. |
| 123 | E/M PORTION Taking down old unserviceable/deteriorated batten/PVC conduit point wiring aluminium/ copper from existing place i.e. light, fan, socket or power points complete with any type of unserviceable fittings such as switches, sockets, bell push, ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar or plaster of Paris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash complete all as specified and directed. |
| 124 | M & L for point wiring with necessary fixing arrangements with PVC-FRLSH insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic PVC conduit medium grade ISI marked not less than 20 mm dia / PVC Casing & Caping not less then (20 x 12 ) mm including all accessories/ fittings such as junction boxes, bends, tee, elbow etc alongwith required size Modular boxes including modular frame / cover plate suitable for mounting switches /sockets etc including PVC-FRLSH insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed for the following:- |
| 125 | One light / Exhaust Fan/Ceiling fan & One Bell/buzzer point controlled by one switch. |
| 126 | One switch socket outlet point 3 pin 5 Amps on Independent board. |
| 127 | One 3 pin 6/5 Amp socket outlet controlled by one switch independent board but below/ side the switch board of light point in same vertical / horzintal plane. |
| 128 | One 3 pin 6/5 Amp socket outlet Same board. |
| 129 | M&L for Point wiring complete with 2 run of 2.5 sqmm single core PVC FRLSH insulated heavy duty ISI Marked , unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including suitable size of PVC non metalic conduit ISI marked not less than 20mm dia / PVC casing caping not less than (20 x 12mm) with all accessories like tee, straight joint, L Bend etc., on wall surface on ceiling / roofs etc., and including provision of PVC insulated heavy duty ISI Marked unsheathed copper conductor 2.5 sqmm for earth continuity conductor and connected to common earth dolly, including suitable size of modular boxes including modular frame / cover plate for housing the switches/socket outlets 15 Amps complete all as specified and directed. |
| 130 | All as per Ser. item No. 125.00 above but for One 3/5 pin 15 Amp socket outlet controlled by one switch indep board but below/ side the switch board in same vertical / Horizontal plane complete all as specified and directed. |
| 131 | Taking down old unserviceable/worn out sub main wiring of any type and size complete all as specified. |
| 132 | Taking down Earth plug/DBs of any make and type including MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash complete all as specified and directed. |
| 133 | Taking down fan/exhaust fan/wall fan any sweep, type and size, keeping with safe custody and refixing the same with replacement of 3 core PVC insulated sheated 3 core multistranded copper conductor cable of appropriate size from ceiling rose to fan terminal as specified/directed including S & F capacitor of suitable capacity, after overhauling the fan including Painting of ceiling fans/Exhaust Fan in site with one coat of synthetic enamel paint of approved shade by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and directed. |
| 134 | M&L for sub main wiring with two single core PVC FRLSH insulated unsheathed copper conductor cable 2.5 sqmm drawing in and including PVC Casing/casing of suitable size on wall/surface on ceiling with one additional PVC wire of copper conductor of 2.5 sqmm for earth continuity conductor complete all as specified and directed.(Note : 3 runs of 2.5 Sqmm cable and earth wire including conduit / PVC casing caping shall be measured as one unit.) |
| 135 | M&L for sub main wiring with two single core PVC FRLSH insulated unsheathed copper conductor cable 6 sqmm drawing in and PVC casing/caping of suitable size on wall/surface on ceiling with one additional PVC wire of copper conductor of 6 sqmm for earth continuity conductor complete all as specified and directed.(Note : 3 runs of 6 Sqmm cable and earth wire including conduit / PVC casing caping shall be measured as one unit.) |
| 136 | M&L for sub main wiring with four single core PVC FRLSH insulated unsheathed copper conductor cable 2 x 4 sqmm drawing in and including suitable size PVC Casing and caping on wall/surface on ceiling with one additional PVC wire of copper conductor of 4 sqmm for earth continuity conductor complete all as specified and directed.(Note : 3 runs of 4 Sqmm cable and earth wire including conduit / PVC casing caping shall be measured as one unit.) |
| 137 | S&F Call Bell AC 230 V Single Pole along with necessary electric connection, complete all as specified and directed. |
| 138 | S&F in replacement of LED 18/20 Watt light fitting Batten integrated LED channel, integral sleek extruded polycarbonate LED Channel with white acrylic cover and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete with all accessories all as specified and directed. |
| 139 | S&F in replacement of LED luminaire 2' x 2', 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for surface/ceiling (as per site requirement) including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. (Note : Sample / make for LED luminaire shall be got approved by contractor from GE prior placing bulk order.) |
| 140 | S&F in replacement of LED light fitting surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete in all respect of 10W capacity complete all as specified and directed. |
| 141 | M&L to perform core drilling on brick/masonry walls with a thickness of up to 18 inches, drilling shall crate holes with a diameter ranging from 2 to 4 inches, using suitable machinery and equipment. The contractor shall provide all necessary materials, labour and eqpt reqd to perform the work complete all as specified and directed.(NOTE : The contractor shall ensure that the drilling prices is executed without damaging the surrounding structure. The Rate quoted shall deemed to inclusive of necessary scaffolding, ladders, or additional support structures necessary to perform the job and security measures by the contractor.) |
| 142 | S&F in replacement of ceiling fan down rod GI pipe of 15 mm bore, duly arrangement of hole and cutting of pipe etc of size 4/6 Feet long complete all as specified and directed. |
| 143 | S&F in replacement of building security LED fitting upto 40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete along with suitable size /bore GI pipe bracked duly cut to size and bent to shape, duly painted incl necessary clamps as required to fix on concrete / steel poles incl taking old unsve light & GI bracket any type and size complete all as specified and as directed.(Note : Sample / make for LED fittings shall be got approved by contractor from GE prior placing bulk order.) |
| 144 | S & F as in replacement Ceiling rose, 3 phase / PVC / polycarbonate, isolated body ISI marked complete all as specified and directed. |
| 145 | S&F in replacement modular switch 6A SP One Way 230V white ivory finish, complete all as specified and directed. |
| 146 | S&F in replacement modular switch 16A SP one - way 230V white ivory finish, complete all as specified and directed. |
| 147 | S&F in replacement modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops,complete all as specified and directed. |
| 148 | S & F in replacement modular socket outlet 2/3 pin 16 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed. |
| 149 | S & F in replacement Modular, step type electronic fan regulator complete all as specified & directed. |
| 150 | S&F in replacement for modular bell push, single pole, one way, 6 Amp suitable for 1 module complete all as specified & directed. |
| 151 | S & F in replacement VTPN 4 Way DB along with MCCB 250Amp 16kA - 01 No, MCB SP 16Nos of 63 Amp, complete wiring all as specified and directed. |
| 152 | S&F in replacement SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, including taking down SPN DB any type, size and description complete all as specified and directed. |
| 153 | S&F in replacement SPN Distribution Box, double door in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 12 way, including taking down old unserviceable SPN DB any type and size complete all as specified and directed. |
| 154 | Supply & Fixing as in replacement of SPN Distribution Box, double door in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 04 way, incl taking down old UNSV SPN DB any type and size complete all as specified and directed. |
| 155 | Supply and fix as in replacement of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, single pole complete all as specified and directed. |
| 156 | S&F in replacement of MCB SPN, 40 to 63 Amps 240 volts, AC, 10 KA breaking capacity 'C' Series, ISI marked complete all as specified and directed. |
| 157 | S&F in replacement of MCB SP, 06 to 63 Amps 240 volts, AC, 10 KA breaking capacity 'C' Series, ISI marked complete all as specified and directed. |
| 158 | M&L as in replacement for earthing with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required complete all as specified and directed.(Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately). |
| 159 | M&L for taking down of split type AC of any type and Capacity duly storing of its refrigerant, disconnecting its both the copper tubes from indoor and out door unit carefully, taking its inner and outer unit and refixing the same in other side of wall/location as directed by EIC , duly filling of make up refrigerant as per desired pressure, minor brazing/welding in copper tubing, making all elect connections as before and testing complete all as specified and directed. |
| 160 | M&L for sub main wiring with four single core PVC FRLSH insulated unsheathed copper conductor cable 10 sqmm drawing in and including PVC Casing/casing of suitable size on wall/surface on ceiling with one additional PVC wire of copper conductor of 10 sqmm for earth continuity conductor complete all as specified and directed by EIC(Note : 5 runs of 10 Sqmm cable and earth wire including conduit / PVC casing caping shall be measured as one unit.) |
| 161 | M&L for sub main wiring with two single core PVC FRLSH insulated unsheathed copper conductor cable 1.5 sqmm drawing in and including PVC Casing/casing of suitable size on wall/surface on ceiling with one additional PVC wire of copper conductor of 1.5 sqmm for earth continuity conductor complete all as specified and directed by EIC.(Note : 3 runs of 1.5 Sqmm cable and earth wire including conduit / PVC casing caping shall be measured as one unit.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender