Tender For Additon/ Alteration To Urc And Addn/Altn Of Certain Misc B/R Work In Pratap Auditorium At Af Stn Utarlai.
Tender Value
30.98 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
18 days left
EMD
61960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Additon/ Alteration To Urc And Addn/Altn Of Certain Misc B/R Work In Pratap Auditorium At Af Stn Utarlai.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches in any type of soil, n.exc. 1.5m wide and n.exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n.exc. 10 sqm on plan and n.exc 1.5m in depth and getting out. |
| 2 | Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm. |
| 3 | Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point. |
| 4 | M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base of foundation filling and mass concrete and similar work. complete all as specified and directed by Engineer-in-Charge. |
| 5 | M&L RCC 1:2:4 type B1 nominal mix (using 20 mm graded stone aggregate) as in footing, foundation beams, plinth brams or bases of columns all as directed. Complete all as specified and directed by Engr-in-charge. |
| 6 | Formwork to sides of concrete foundations, plinth brams, footings, bases of columns all as directed. |
| 7 | M&L TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm diameter. Complete all as specified and directed by Engr-in-charge. |
| 8 | Ditto as per Item above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 9 | M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6 complete .complete all as specified and directed by Engr-in-charge. |
| 10 | M/L rendering 15mm thick on concrete surface or brick/stone work in CM 1:4 finished even and smooth with out using extra cement . complete all as specified and directed by Engr-in-charge. |
| 11 | M&L for rendering 10mm thick in CM (1:6) on walls, finishing even and smooth without using extra cement similar work .complete all as specified and directed by Engr-in-charge. |
| 12 | M&L for preparation of surface and applying two coats of oil bound distemper on newly plastered wall surfaces over one coat primer and over and including 1.50 mm thick wall care putty complete all as specified and directed by Engr-in-charge. |
| 13 | M & L for prepration of newly plastered external surfaces of wall and for applying two or more coats of Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two ormore coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primerapplied @ 2.20 kg/10 sqm) all as per manufacturs instructions incl necessary scaffolding writing letters etc complete all as specified and directed by Engr-in-charge. |
| 14 | M&L for 18-20mm thick granite (of any type) work, table rubbed mirror and polished as in steps, jambs, pillars, window- cills, cooking platforms and like bedded over and including 20mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge. |
| 15 | M&L for 75mm thick PCC 1:4:8 type B-2(using 40mm graded aggr) as in sub base finished even and rough with out using extra cemet.complete all as specified and directed by Engr-in-charge. |
| 16 | M&L for 25mm thick PCC 1:2:4 type B-1(using 20mm graded aggr) as in level course finished even and rough with out using extra cemet.complete all as specified and directed by Engr-in-charge. |
| 17 | S&F for vitrified ceramic tiles 10mm thick (squares/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1 sqm as in floors etc. set and jointed in neat cement slurry with using spacer and epoxy filling in joints and simialr work over and including 15mm thick screed in CM(1:6) with providing of any dark colour border complete all as specified and directed by Engr-in-charge. |
| 18 | M&L for coloured glazed ceramic tiles size 300 X 450 X 7-8mm thick on vertical surface over and including 10mm thick rendering in CM (1:4) as in dado/skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured complete all as specified and directed by Engr-in-charge. |
| 19 | S&F Powder coated(powder coating not less than min 50 Micron)aluminium frame for doors,windows, partition, ventilators with one or more rebates including joining cleat for fixing/sliding etc. Complete all as specified and directed by Engineer-in-Charge. |
| 20 | S&F Powder coated(powder coating not less than min 50 Micron) aluminium rolling/side hung window and ventilator shutters without sash bars, aluminium sections weighting 0.55 Kg/Mtr incl necessary joining leats, glazing lcip, subber packing, snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1Nos) hinges type B-21 100mm long(02 Nos suitable powder coated handle as required Powder coated aluminum snap beading screws etc . Complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F for framed work such as grills gratings etc with ends of bars shoudered and /or riveted, or forged into spikes, framed guard bars barred iron doors ladders framed blaluster walk way railings framework of waterr tands and similar works conforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-charge. |
| 22 | M&L for preparation of new or untreated steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide primer , complete all as specified and directed. |
| 23 | M&L sheet glass ordinary quality 4.8/5 mm thick(tinted/plain) and glazing with oil putty or aluminium clip and similar work in squares exc 0.5 sqm each pane fixed. |
| 24 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm. complete all as specified and directed. |
| 25 | M&L sheet 12mm thick toughened glass premium quality fixed on floor spring including two nos of stainless steel 600mm long handle, the shutter glass shall be machine-cut edge polished and toughened as per standard specification. Decorative etching work (sand blasting/acid etching) shall be done as per approved design & pattern including other necessary allied work such as cutting to shape, drillinng holes as required. Complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. Complete as specified and directed by Engr-in-charge. |
| 27 | M&L for 75mm thick cement concrete (1:3:6) type C2 using 20mm graded stone aggregate as in paving/plinth protection in bitumen filler/mastic filling Complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F for powder coated GI snap grid frame work for false ceiling work for seamless ceiling size of grid 600 x 600 mm including perimeter wall angle, main tees, cross tees, suspenders, clips and all incidental works and seuspenced from soffit/ceiling at approx 900 mm C/C with GI cleat/wire or similar item and steel expansion fasteners . Complete all as specified and directed by Engineer-in-Charge. |
| 29 | S&F for 8-10 mm thick decorative false ceiling boards (size 600 x 600 mm size), fixed on GI grid and similar work as per manufacturer instruction. Complete all as specified and directed. |
| 30 | S&F for steel work in tubular trusses, post, purline, rafter framed work incl special shaped washer etc complete using ERW, MS plate and similar work including butt welded tubes conforming to IS 1161-1979 grade st -240. Complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding top wall, fixed with self tapping screws, complete all as specified and directred. |
| 32 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding top wall, fixed with self tapping screws, complete all as specified and directred. |
| 33 | M&L for PCC (1:1.5:3) type B-1 using 20 mm graded stone aggregate as in hold fast, coping and similar work including necessary form work, complete all as specified and directed. |
| 34 | M & L for application of water proofing treatment using APP modified roof membrane over existing accessible RCC roof slab / chajja / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) Cleaning existing surface properly.(b) Applying bitumen primer/tack coat of in dustrial bitumen 85/25 at the rate of 1.20kg/Sqm by the same agency as that of APP membrane. (c) Laying of APP based polymeric membrane minium weight 3kg/Sqm and miniume 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/sqm) land on primed surface by forced application using butane torch by torch application with 100mm side laps and 150mm end lap. (d) one coat of aluminium paint over a coat of primer apply on top surface of APP. |
| 35 | Complete removal of existing treatment of wall surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and applying two coats of oil bound distemper over and included 1.50 mm thick wall care putty to make smooth surface incl complete removal of existing treatment on walls all as specified and directed by Engr-in- charge |
| 36 | Complete removal of existing treatment of wall surface external surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and for applying two or more coats of Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as per manufacturs instructions incl necessary scaffolding writing letters etc upto 12mtr height of bldg complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
| 37 | Complete removal of existing treatment of wall surface external surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and for applying two or more coats of Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as per manufacturs instructions incl necessary scaffolding writing letters etc upto 12mtr height of bldg complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender